summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2009-02-27irda: remove some pointless conditionals before kfree_skb()Wei Yongjun1-2/+1
Remove some pointless conditionals before kfree_skb(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27hso: remove hso_free_device()Paulius Zaleckas1-10/+4
There is really no need for function just doing simple kfree() Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27hso: remove claiming and releasing of USB interfacePaulius Zaleckas1-4/+0
No need to reclaim the same USB interface beeing probed. Releasing interface does nothing also. This is already in for a long time in off-kernel hso driver and no regresions were noticed for this change. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27ppp_generic: Simplify tx_dropped statsPaulius Zaleckas1-1/+1
Local variable dev = ppp->dev Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27m68knommu: remove ColdFire specific setup code from FEC driverGreg Ungerer1-500/+12
Remove the ColdFire CPU specific setup from here. The ColdFire CPU platform code now sets up all this. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27qlge: Reduce debug print output.Ron Mercer1-12/+12
Get rid of some noise that is for debug only. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27qlge: Prepare to add new device.Ron Mercer2-19/+78
This organizes a few calls into a function table to enable adding new devices. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27qlge: Move firmware event handler.Ron Mercer3-28/+62
This is not a logical change but rather a move of the inbound firmware event handler into it's own function as it will later be called by the outbound path. The addition of the mutex is to create exclusive access to the mailbox commands between inbound and outbound handling. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27qlge: Clean up firmware reset path.Ron Mercer1-7/+29
Add function for performing the reset rather than in-line. This function may later be called by a core dump process. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27qlge: Add defines for firmware support.Ron Mercer2-34/+66
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27mdio: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27forcedeth: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27hamachi: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27sundance: fix non-constant printk warningsStephen Hemminger1-2/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27starfire: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27via-rhine: fix non-constant printk warningsStephen Hemminger1-2/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27fealnx: fix non-constant printk warningsStephen Hemminger1-2/+2
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27natsemi: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27acenic: fix non-constant printk warningsStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27yellowfin: fix non-constant printk warningsStephen Hemminger1-3/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27sis900: fix non-constant printk warningsStephen Hemminger1-2/+2
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27ne2k-pci: fix non-constant printk warningsStephen Hemminger1-2/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-273c59x: get rid of non-const printk warningsStephen Hemminger1-3/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27lapb: get rid of non-const printk warningStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27tulip: get rid of warning for non-const string literalStephen Hemminger4-6/+7
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25Merge branch 'master' of ↵David S. Miller4-11/+52
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/orinoco/orinoco.c
2009-02-25Merge branch 'master' of ↵David S. Miller3-11/+44
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-02-25asix: new device idsGreg Kroah-Hartman1-0/+8
This patch adds two new device ids to the asix driver. One comes directly from the asix driver on their web site, the other was reported by Armani Liao as needed for the MSI X320 to get the driver to work properly for it. Reported-by: Armani Liao <aliao@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25qlge: Use one path to (re)fill rx buffers.Ron Mercer1-111/+59
Currently there are two paths for filling rx buffer queues. One is used during initialization and the other during runtime. This patch removes ql_alloc_sbq_buffers() and ql_alloc_lbq_buffers() and replaces them with a call to the runtime functions ql_update_lbq() and ql_update_sbq(). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25qlge: Optimize rx buffer refill process.Ron Mercer1-5/+12
RX Buffers are refilled in chunks of 16 at a time before notifying the hardware with a register write. This can cause several writes to take place in a given napi poll call. This change causes the write to take place only once at the end of the call. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25qlge: Change frame route hw semaphore granularity.Ron Mercer1-18/+13
Instead of taking/giving the hw semaphore repeatedly when iterating over several frame to queue route settings, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25qlge: Increase MAC addr hw sem granularity.Ron Mercer2-17/+43
Instead of taking/giving the semaphore repeatedly when iterating over several adderesses, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25qlge: Clean up mac address and frame route settings.Ron Mercer1-9/+22
Setting MAC addresses and routing frames to various queues will need to be done in response to firmware events as well as during initialization. This change encapsulates the facilities into a single call that can later me made from other places. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25mv643xx_eth: set sane default receive coalescing timeoutLennert Buytenhek1-1/+1
A receive coalescing timeout of 250 usec appears to strike a good balance between allowing enough received frames to be aggregated for LRO to do its job and not allowing the connection to stall due to delaying ACKs to the remote end for too long. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25mv643xx_eth: move a couple of init actions from ->open() to port probeLennert Buytenhek1-5/+5
Move the netif_carrier_off() call in ->open() to port probe, so that ethtool doesn't report the link as being up before we have up'd the interface. Move initialisation of the rx/tx coalescing timers from ->open() to port probe, so that we don't reset the coalescing timers every time the interface is up'd. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25mv643xx_eth: convert to net_device_opsLennert Buytenhek1-12/+17
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25mv643xx_eth: make LRO unconditionalLennert Buytenhek2-22/+1
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netxen: refactor pci probeDhananjay Phadke1-181/+203
Split pci probe function into smaller logical blocks. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netxen: cleanup unused codeDhananjay Phadke5-694/+0
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netxen: advertise wake-on-lan supportDhananjay Phadke2-0/+52
Add ethtool wake on lan support. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25netxen: firmware download supportDhananjay Phadke4-74/+238
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25ixbge: fix bug when using large pages and jumbo framesJesse Brandeburg2-1/+9
it was pointed out on the list that ixgbe was failing when using 64kB pages and large 16kB MTU. since with a 64kB PAGE_SIZE MAX_SKB_FRAGS = 3, the way the driver was configuring page usage was assuming 2kB is half a page, and was only ever dmaing that much data to a half page. (16kB - header size) / 2048 = 7 or 8 pages, which would far exceed 3 adjust the driver to account for these large pages, the hardware can support DMA to up to 16kB for each descriptor. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-25ixgbe: Move ring features into an enum, allowing easier future maintenanceShannon Nelson1-4/+10
From: Shannon Nelson <shannon.nelson@intel.com> The ring_feature member of ixgbe_adapter is statically allocated based on the supported features of the device. When a new feature is added, we need to manually update the static allocation. This patch makes the feature list an enum, eliminating the need for multiple updates to the code when adding a new feature. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24Merge branch 'master' of ↵David S. Miller1-4/+12
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller21-19/+5163
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-1/+1
2009-02-24netxen: handle pci bar 0 mapping failureDhananjay Phadke1-1/+6
PCI bar 0 is used for memory mapped register access. If ioremap fails (returns NULL), register access results in crash. Use pci_ioremap_bar() instead of ioremap(), the latter fails on on 32 bit powerpc where pci resource address is > 32 bits. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24netxen: fix physical port mappingDhananjay Phadke1-3/+6
The PCI function to physical port mapping is valid only for old firmware. New firmware (4.0.0+) abstracts this. So driver should never try to access phy using invalid mapping. The behavior is unpredictable when PCI functions 4-7 are enabled on the same NIC. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds21-19/+5163
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: fix double free at netns creation veth : add the set_mac_address capability sunlance: Beyond ARRAY_SIZE of ib->btx_ring sungem: another error printed one too early ISDN: fix sc/shmem printk format warning SMSC: timeout reaches -1 smsc9420: handle magic field of ethtool_eeprom sundance: missing parentheses? smsc9420: fix another postfixed timeout wimax/i2400m: driver loads firmware v1.4 instead of v1.3 vlan: Update skb->mac_header in __vlan_put_tag(). cxgb3: Add support for PCI ID 0x35. tcp: remove obsoleted comment about different passes TG3: &&/|| confusion ATM: misplaced parentheses? net/mv643xx: don't disable the mib timer too early and lock properly net/mv643xx: use GFP_ATOMIC while atomic atl1c: Atheros L1C Gigabit Ethernet driver net: Kill skb_truesize_check(), it only catches false-positives. net: forcedeth: Fix wake-on-lan regression
2009-02-23rtl8187: New USB ID's for RTL8187LLarry Finger1-0/+12
Add new USB ID codes. These come from two postings on forums and mailing lists, and four are derived from the .inf that accompanies the latest Realtek Windows driver for the RTL8187L. Thanks to Viktor Ilijašić <viktor.ilijasic@gmail.com> and Xose Vazquez Perez <xose.vazquez@gmail.com> for reporting these new ID's. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 15:58:19 +0300