summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-05-10mlxsw: spectrum_matchall: Restrict sample action to be allowed only on ingressJiri Pirko1-0/+5
HW supports packet sampling on ingress only. Check and fail if user is adding sample on egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: freescale: select CONFIG_FIXED_PHY where neededArnd Bergmann2-0/+3
I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y: x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier' It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'. The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10hinic: add three net_device_ops of vfLuo bin11-24/+453
adds ndo_set_vf_rate/ndo_set_vf_spoofchk/ndo_set_vf_link_state to configure netdev of virtual function Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09Merge tag 'mlx5-updates-2020-05-09' of ↵Jakub Kicinski20-283/+456
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-05-09 This series includes updates to mlx5 netdev driver and bonding updates to support getting the next active tx slave. 1) merge commit with mlx5-next that includes bonding updates from Maor Bonding: Add support to get xmit slave 2) Maxim makes some general code improvements to TX data path 3) Tariq makes some general code improvements to kTLS and mlx5 accel layer in preparation for mlx5 TLS RX. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: unify MAC generationMark Starovoytov3-44/+15
This patch unifies invalid MAC address handling with other drivers. Basically we've switched to using standard APIs (is_valid_ether_addr / eth_hw_addr_random) where possible. It's worth noting that some of engineering Aquantia NICs might be provisioned with a partially zeroed out MAC, which is still invalid, but not caught by is_valid_ether_addr(), so we've added a special handling for this case. Also adding a warning in case of fallback to random MAC, because this shouldn't be needed on production NICs, they should all be provisioned with unique MAC. NB! Default systemd/udevd configuration is 'MACAddressPolicy=persistent'. This causes MAC address to be persisted across driver reloads and reboots. We had to change it to 'none' for verification purposes. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: remove check for boot code survivability before reset requestMark Starovoytov1-8/+0
This patch removes unnecessary check for boot code survivability before reset request. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: remove hw_atl_b0_hw_rss_set call from A2 codeMark Starovoytov3-8/+7
No need to call hw_atl_b0_hw_rss_set from hw_atl2_hw_rss_set Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: remove TPO2 check from A0 codeMark Starovoytov1-2/+1
TPO2 was introduced in B0 only, no reason to check for it in A0 code. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: rename AQ_NIC_RATE_2GS to AQ_NIC_RATE_2G5Mark Starovoytov10-42/+49
This patch changes the constant name to a more logical "2G5" (for 2.5G speeds). Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: minor MACSec code cleanupMark Starovoytov1-3/+3
This patch fixes a couple of minor merge issues found in macsec_api.c after corresponding patch series has been applied. These are not real bugs, so pushing to net-next. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: use __packed instead of the full expansion.Mark Starovoytov1-2/+2
This patches fixes the review comment made by Jakub Kicinski in the "net: atlantic: A2 support" patch series. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net/mlx5e: Enhance ICOSQ WQE info fieldsTariq Toukan3-11/+19
The same WQE opcode might be used in different ICOSQ flows and WQE types. To have a better distinguishability, replace it with an enum that better indicates the WQE type and flow it is used for. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5: Accel, Remove unnecessary header includeTariq Toukan1-1/+0
The include of Ethernet driver header in core is not needed and actually wrong. Remove it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Use struct assignment for WQE info updatesTariq Toukan4-17/+24
Struct assignment looks more clean, and implies resetting the not assigned fields to zero, instead of holding values from older ring cycles. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Take TX WQE info structures out of general EN headerTariq Toukan3-27/+27
Into the txrx header file. The mlx5e_sq_wqe_info structure describes WQE info for the ICOSQ, rename it to better reflect this. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: kTLS, Do not fill edge for the DUMP WQEs in TX flowTariq Toukan1-4/+1
Every single DUMP WQE resides in a single WQEBB. As the pi is calculated per each one separately, there is no real need for a contiguous room for them, allow them to populate different WQ fragments. This reduces WQ waste and improves its utilization. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: kTLS, Fill work queue edge separately in TX flowTariq Toukan1-10/+8
For the static and progress context params WQEs, do the edge filling separately. This improves the WQ utilization, code readability, and reduces the chance of future bugs. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Split TX acceleration offloads into two phasesMaxim Mikityanskiy8-23/+52
After previous modifications, the offloads are no longer called one by one, the pi is calculated and the wqe is cleared on between of TLS and IPSEC offloads, which doesn't quite fit mlx5e_accel_handle_tx's purpose. This patch splits mlx5e_accel_handle_tx into two functions that correspond to two logical phases of running offloads: 1. Before fetching a WQE. Here runs the code that can post WQEs on its own, before the main WQE is fetched. It's the main part of TLS offload. 2. After fetching a WQE. Here runs the code that updates the WQE's fields, but can't post other WQEs any more. It's a minor part of TLS offload that sets the tisn field in the cseg, and eseg-based offloads (currently IPSEC, and later patches will move GENEVE and checksum offloads there, too). It allows to make mlx5e_xmit take care of all actions needed to transmit a packet in the right order, improve the structure of the code and reduce unnecessary operations. The structure will be further improved in the following patches (all eseg-based offloads will be moved to a single place, and reserving space for the main WQE will happen between phase 1 and phase 2 of offloads to eliminate unneeded data movements). Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Update UDP fields of the SKB for GSO firstMaxim Mikityanskiy1-3/+5
mlx5e_udp_gso_handle_tx_skb updates the length field in the UDP header in case of GSO. It doesn't interfere with other offloads, so do it first to simplify further restructuring of the code. This way we'll make all independent modifications to the SKB before starting to work with WQEs. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Make TLS offload independent of wqe and piMaxim Mikityanskiy5-23/+23
TLS offload may write a 32-bit field (tisn) to the cseg of the WQE. To do that, it receives pi and wqe pointers. As TLS offload may also send additional WQEs, it has to update pi and wqe, and in many cases it even doesn't use pi calculated before and wqe zeroed before and does it itself. Also, mlx5e_sq_xmit has to copy the whole cseg if it goes to the mlx5e_fill_sq_frag_edge flow. This all is not efficient. It's more efficient to do the following: 1. Just return tisn from TLS offload and make the caller fill it in a more appropriate place. 2. Calculate pi and clear wqe after calling TLS offload. 3. If TLS offload has to send WQEs, calculate pi and clear wqe just before that. It's already done in all places anyway, so this commit allows to remove some redundant memsets and calls. Copying of cseg will be eliminated in one of the following commits, and all other stuff is done here. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Pass only eseg to IPSEC offloadMaxim Mikityanskiy3-4/+4
IPSEC offload needs to modify the eseg of the WQE that is being filled, but it receives a pointer to the whole WQE. To make the contract stricter, pass only the pointer to the eseg of that WQE. This commit is preparation for the following refactoring of offloads in the TX path and for the MPWQE support. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Return void from mlx5e_sq_xmit and mlx5i_sq_xmitMaxim Mikityanskiy4-19/+18
mlx5e_sq_xmit and mlx5i_sq_xmit always return NETDEV_TX_OK. Drop the return value to simplify the code. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Unify checks of TLS offloadsMaxim Mikityanskiy3-22/+13
Both INNOVA and ConnectX TLS offloads perform the same checks in the beginning. Unify them to reduce repeating code. Do WARN_ON_ONCE on netdev mismatch and finish with an error in both offloads, not only in the ConnectX one. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Return bool from TLS and IPSEC offloadsMaxim Mikityanskiy8-68/+50
TLS and IPSEC offloads currently return struct sk_buff *, but the value is either NULL or the same skb that was passed as a parameter. Return bool instead to provide stronger guarantees to the calling code (it won't need to support handling a different SKB that could be potentially returned before this change) and to simplify restructuring this code in the following commits. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09Merge branch 'mlx5-next' of ↵Saeed Mahameed3-98/+259
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux This merge includes updates to bonding driver needed for the rdma stack, to avoid conflicts with the RDMA branch. Maor Gottlieb Says: ==================== Bonding: Add support to get xmit slave The following series adds support to get the LAG master xmit slave by introducing new .ndo - ndo_get_xmit_slave. Every LAG module can implement it and it first implemented in the bond driver. This is follow-up to the RFC discussion [1]. The main motivation for doing this is for drivers that offload part of the LAG functionality. For example, Mellanox Connect-X hardware implements RoCE LAG which selects the TX affinity when the resources are created and port is remapped when it goes down. The first part of this patchset introduces the new .ndo and add the support to the bonding module. The second part adds support to get the RoCE LAG xmit slave by building skb of the RoCE packet based on the AH attributes and call to the new .ndo. The third part change the mlx5 driver driver to set the QP's affinity port according to the slave which found by the .ndo. ==================== Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net: lio_core: remove redundant assignment to variable tx_doneColin Ian King1-1/+0
The variable tx_done is being assigned with a value that is never read as the function returns a few statements later. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net/atheros: remove redundant assignment to variable sizeColin Ian King1-1/+1
The variable size is being assigned with a value that is never read, the assignment is redundant and cab be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09cnic: remove redundant assignment to variable retColin Ian King1-1/+0
The variable ret is being assigned with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: tg3: tidy up loop, remove need to compute off with a multiplyColin Ian King1-5/+3
Currently the value for 'off' is computed using a multiplication and a couple of statements later off is being incremented by len and this value is never read. Clean up the code by removing the multiplication and just increment off by len on each iteration. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09r8169: improve reset handling for chips from RTL8168gHeiner Kallweit1-1/+4
Sync the reset preparation for chips from RTL8168g with the r8168 and r8125 vendor drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09r8169: add helper rtl_wait_txrx_fifo_emptyHeiner Kallweit1-14/+21
Add a helper for waiting for FIFO's to be empty, again the name is borrowed from the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09r8169: add helper rtl_enable_rxdvgateHeiner Kallweit1-2/+8
Add a helper for setting RXDV_GATED_EN, the 2ms delay is copied from the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09r8169: add helper r8168g_wait_ll_share_fifo_readyHeiner Kallweit1-10/+9
Create a helper for this waiting function, name of the helper is borrowed from the vendor driver. In addition don't return in the two hw_init functions if the first wait runs into a timeout, there's no benefit in doing so. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: ipa: Remove ipa_endpoint_stop{,_rx_dma} againNathan Chancellor1-61/+0
When building arm64 allyesconfig: drivers/net/ipa/ipa_endpoint.c: In function 'ipa_endpoint_stop_rx_dma': drivers/net/ipa/ipa_endpoint.c:1274:13: error: 'IPA_ENDPOINT_STOP_RX_SIZE' undeclared (first use in this function) drivers/net/ipa/ipa_endpoint.c:1274:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ipa/ipa_endpoint.c:1289:2: error: implicit declaration of function 'ipa_cmd_dma_task_32b_addr_add' [-Werror=implicit-function-declaration] drivers/net/ipa/ipa_endpoint.c:1291:45: error: 'ENDPOINT_STOP_DMA_TIMEOUT' undeclared (first use in this function) drivers/net/ipa/ipa_endpoint.c: In function 'ipa_endpoint_stop': drivers/net/ipa/ipa_endpoint.c:1309:16: error: 'IPA_ENDPOINT_STOP_RX_RETRIES' undeclared (first use in this function) These functions were removed in a series, merged in as commit 33395f4a5c1b ("Merge branch 'net-ipa-kill-endpoint-stop-workaround'"). Remove them again so that the build works properly. Fixes: 3793faad7b5b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: dsa: sja1105: remove set but not used variable 'prev_time'Samuel Zou1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/sja1105/sja1105_vl.c:468:6: warning: variable ‘prev_time’ set but not used [-Wunused-but-set-variable] u32 prev_time = 0; ^~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: dsa: vsc73xx: convert to devm_platform_ioremap_resourceWei Yongjun1-9/+1
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09octeontx2-vf: Fix error return code in otx2vf_probe()Wei Yongjun1-2/+6
Fix to return negative error code -ENOMEM from the alloc failed error handling case instead of 0, as done elsewhere in this function. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09dpaa2-eth: prevent array underflow in update_cls_rule()Dan Carpenter1-1/+1
The "location" is controlled by the user via the ethtool_set_rxnfc() function. This update_cls_rule() function checks for array overflows but it doesn't check if the value is negative. I have changed the type to unsigned to prevent array underflows. Fixes: afb90dbb5f78 ("dpaa2-eth: Add ethtool support for flow classification") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09nfp: abm: fix error return code in nfp_abm_vnic_alloc()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 174ab544e3bc ("nfp: abm: add cls_u32 offload for simple band classification") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09r8169: re-establish support for RTL8401 chip versionHeiner Kallweit1-0/+2
r8169 never had native support for the RTL8401, however it reportedly worked with the fallback to RTL8101e [0]. Therefore let's add this as an explicit assignment. [0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=956868 Fixes: b4cc2dcc9c7c ("r8169: remove default chip versions") Reported-by: Camaleón <noelamac@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-08iwlwifi: pcie: handle QuZ configs with killer NICs as wellLuca Coelho1-0/+4
The killer devices were left out of the checks that convert Qu-B0 to QuZ configurations. Add them. Cc: stable@vger.kernel.org # v5.3+ Fixes: 5a8c31aa6357 ("iwlwifi: pcie: fix recognition of QuZ devices") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Tested-by: You-Sheng Yang <vicamo@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200424121518.b715acfbe211.I273a098064a22577e4fca767910fd9cf0013f5cb@changeid
2020-05-08iwlwifi: dbg_ini: differentiate ax210 hw with same hw typeLiad Kaufman2-3/+32
There are several "flavors" of HW that have the same HW type, but can be told apart after reading a certain perph register. This is easy to do in runtime, but more complicated to do when looking at the logs offline. To make it easier to tell apart these "flavors" when looking at the dumped dbg info, add these bits to the HW type, allowing simple differentiation. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.330ea11d17ae.Ie59b25430a308090b15112ac6deedf4fbf487ff1@changeid
2020-05-08iwlwifi: pcie: skip fragmented receive buffersJohannes Berg2-6/+30
We don't really expect fragmented RBs, and don't seem to be seeing them in practice since that would've caused a crash. Nevertheless, we should be expecting the hardware to send them. Parse the flag indicating a fragmented buffer, but then discard it and any fragments thereof, at least for now. We need to do more work in the higher layers to properly deal with this, since we may not get "normal" firmware notifications that are fragmented, only RX, and then we need to put it back together and add the necessary API to report a chain of things to the higher layers, this doesn't fit into the struct iwl_rx_cmd_buffer today. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.e78a59f70b1d.Ica656a98a4e4220d73edc97600edd680cbc97241@changeid
2020-05-08iwlwifi: remove outdated copyright print/module statementJohannes Berg4-8/+6
Remove the outdated copyright, don't print it, and update the module author to actually be Intel, not Intel's copyright. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.dc86a4e9451a.Ice2e21b6427a4b57f953dba9ceb5b8b96b251a8c@changeid
2020-05-08iwlwifi: mvm: don't transmit on unallocated queueJohannes Berg1-1/+11
We can currently end up transmitting on an unallocated queue, if the allocation fails. Stop doing that, by simply not transmitting. We don't have any better strategy here, unfortunately, but the previous commits make that much less likely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.dcf1801f25ef.I6d71e13ea042765800f2ee41401b8eb282527c34@changeid
2020-05-08iwlwifi: tx: enable A-MSDU in low latency modeMordechay Goodstein1-7/+4
Tests have shown that we can meet low latency KPIs with A-MSDU enabled so enable it to achieve max TPT. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.e469ce6501e4.Ibdecebca830bdfbf5220693dd1f5367f7736242d@changeid
2020-05-08iwlwifi: use longer queues for 256-BAJohannes Berg2-2/+2
When we have 256 block-ack support, we may need to be very fast to provide a lot of frames to the hardware to transmit, but that cannot be guaranteed. Use a longer queue size to have more time, and the next possible queue size is 1024 since it must be a power of two. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.851866c7e4c4.I13fa678929431f1694fd202c1da40aa476ab70fe@changeid
2020-05-08iwlwifi: pcie: gen2: use DMA pool for byte-count tablesJohannes Berg3-3/+28
Since the recent patch in this area, we no longer allocate 64k for a single queue, but only 1k, which still means a full page. Use a DMA pool to reduce this further, since we will have a lot of queues in a typical system that can share pages. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.6e84c79aea30.Ie9a417132812d110ec1cc87852f101477c01cfcb@changeid
2020-05-08iwlwifi: pcie: remove some dead codeJohannes Berg1-6/+6
We can never get into this code with a gen2/3 device, and therefore don't need to allocate the byte count tables in a single contiguous DMA region. Just WARN and bail out if something is misconfigured. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.a748d33252ef.If2f5810016efb40b041f93fe8c6b4c251542e2f1@changeid
2020-05-08iwlwifi: dbg: mark a variable __maybe_unusedJohannes Berg1-1/+1
If CONFIG_IWLWIFI_DEBUGFS is not set, the variable is assigned but not checked, resulting in a compiler warning. Suppress it, we need the variable for the debugfs-enabled case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.485f886f5a6c.I8a91c560c26cced33b15d8419caebb53a9abcc2d@changeid
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 01:58:48 +0300