summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-10-25ieee802154: move wpan-phy.h to cfg802154.hAlexander Aring5-5/+5
The wpan-phy header contains the wpan_phy struct information. Later this header will be have similar function like cfg80211 header. The cfg80211 header contains the wiphy struct which is identically the wpan_phy struct inside 802.15.4 subsystem. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25mac802154: fix typo IEEE802515 to IEEE802154Alexander Aring3-12/+12
This patch fixs a typo in address filter defines from IEEE802515 to IEEE802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: mac802154: remove FSF addressAlexander Aring3-12/+0
This patch removes the FSF address in files which belongs to ieee802154 and mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: remove unnecessary print of async errorAlexander Aring1-1/+0
The async error function will already printout the errno over dev_err. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix enable_irq handling on async spiAlexander Aring1-80/+77
Sometimes the async state function is call in an context where the spi irq is diabled. This patch fix the handling to enable the irq when spi_async failed in the async state change calling chain. We do this by a context parameter irq_enable and evaluate this parameter when spi_async failed instead of returning spi_async errno. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix race conditionAlexander Aring1-1/+1
When the driver waits for a tx completion currently the driver direct enables the irq. When we switching to RX_AACK_ON some steps afterwards the driver could receive a new frame and request resources which are already in use, for example irq state change resource. To be sure there are no new interrupts when we switching to RX_AACK_ON, we enable the irq when state change to RX_AACK_ON was completed. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: add missing enable_irqAlexander Aring1-0/+1
This patch adds a missing enable_irq when spi_async in isr failed. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: squash unnecessary dereferencingAlexander Aring1-1/+1
This patch removes dereferencing irq number over spi struct. Instead we doing it directly over isr paramater. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: correct at86rf2xx lifs timingsAlexander Aring1-3/+3
Symbol rate is 16 us. Lifs is 40 symbols. 16 * 40 = 640 us. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: correct aret lifs and sifs handlingAlexander Aring1-0/+5
This patch adds lifs/sifs handling only if max_frame_retries is above zero. The at86rf2xx datasheets says nothing about phy lifs/sifs handling. I asked the atmel support and they said lifs/sifs is done by phy when max_frame_retries is above zero. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: add missing error handlingAlexander Aring1-1/+3
This patch adds an async error handling function if sync state change runs into a timeout. The async error handling function tries to recover the phy state machine into a valid state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25at86rf230: fix errno on tx timeout handlingAlexander Aring1-1/+1
The rc variable is zero if we get a timeout. Instead of pass the rc variable to the async error handling function which try to recover the phy, we use a static -ETIMEDOUT errno. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: mrf24j40: Add support for MRF24J40MCSimon Vincent1-2/+30
The MRF24J40MC module has an external amplifier which should be enabled. The TX power has to be lowered to meet FCC regs. Signed-off-by: Simon Vincent <simon.vincent@xsilon.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-19Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+2
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-32/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "One cc: stable commit, the rest are a series of minor cleanups which have been sitting in MST's tree during my vacation. I changed a function name and made one trivial change, then they spent two days in linux-next" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) virtio-rng: refactor probe error handling virtio_scsi: drop scan callback virtio_balloon: enable VQs early on restore virtio_scsi: fix race on device removal virito_scsi: use freezable WQ for events virtio_net: enable VQs early on restore virtio_console: enable VQs early on restore virtio_scsi: enable VQs early on restore virtio_blk: enable VQs early on restore virtio_scsi: move kick event out from virtscsi_init virtio_net: fix use after free on allocation failure 9p/trans_virtio: enable VQs early virtio_console: enable VQs early virtio_blk: enable VQs early virtio_net: enable VQs early virtio: add API to enable VQs early virtio_net: minor cleanup virtio-net: drop config_mutex virtio_net: drop config_enable virtio-blk: drop config_mutex ...
2014-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds43-397/+1251
Pull networking fixes from David Miller: 1) Include fixes for netrom and dsa (Fabian Frederick and Florian Fainelli) 2) Fix FIXED_PHY support in stmmac, from Giuseppe CAVALLARO. 3) Several SKB use after free fixes (vxlan, openvswitch, vxlan, ip_tunnel, fou), from Li ROngQing. 4) fec driver PTP support fixes from Luwei Zhou and Nimrod Andy. 5) Use after free in virtio_net, from Michael S Tsirkin. 6) Fix flow mask handling for megaflows in openvswitch, from Pravin B Shelar. 7) ISDN gigaset and capi bug fixes from Tilman Schmidt. 8) Fix route leak in ip_send_unicast_reply(), from Vasily Averin. 9) Fix two eBPF JIT bugs on x86, from Alexei Starovoitov. 10) TCP_SKB_CB() reorganization caused a few regressions, fixed by Cong Wang and Eric Dumazet. 11) Don't overwrite end of SKB when parsing malformed sctp ASCONF chunks, from Daniel Borkmann. 12) Don't call sock_kfree_s() with NULL pointers, this function also has the side effect of adjusting the socket memory usage. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) bna: fix skb->truesize underestimation net: dsa: add includes for ethtool and phy_fixed definitions openvswitch: Set flow-key members. netrom: use linux/uaccess.h dsa: Fix conversion from host device to mii bus tipc: fix bug in bundled buffer reception ipv6: introduce tcp_v6_iif() sfc: add support for skb->xmit_more r8152: return -EBUSY for runtime suspend ipv4: fix a potential use after free in fou.c ipv4: fix a potential use after free in ip_tunnel_core.c hyperv: Add handling of IP header with option field in netvsc_set_hash() openvswitch: Create right mask with disabled megaflows vxlan: fix a free after use openvswitch: fix a use after free ipv4: dst_entry leak in ip_send_unicast_reply() ipv4: clean up cookie_v4_check() ipv4: share tcp_v4_save_options() with cookie_v4_check() ipv4: call __ip_options_echo() in cookie_v4_check() atm: simplify lanai.c by using module_pci_driver ...
2014-10-18bna: fix skb->truesize underestimationEric Dumazet1-1/+1
skb->truesize is not meant to be tracking amount of used bytes in an skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. skb->truesize can be very different from skb->len, that has a very specific safety purpose. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18dsa: Fix conversion from host device to mii busGuenter Roeck2-8/+22
Commit b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") replaces mii_bus with a generic host_dev, and introduces dsa_host_dev_to_mii_bus() to support conversion from host_dev to mii_bus. However, in some cases it uses to_mii_bus to perform that conversion. Since host_dev is not the phy bus device but typically a platform device, this fails and results in a crash with the affected drivers. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81781d35>] __mutex_lock_slowpath+0x75/0x100 PGD 406783067 PUD 406784067 PMD 0 Oops: 0002 [#1] SMP ... Call Trace: [<ffffffff810a538b>] ? pick_next_task_fair+0x61b/0x880 [<ffffffff81781de3>] mutex_lock+0x23/0x37 [<ffffffff81533244>] mdiobus_read+0x34/0x60 [<ffffffff8153b95a>] __mv88e6xxx_reg_read+0x8a/0xa0 [<ffffffff8153b9bc>] mv88e6xxx_reg_read+0x4c/0xa0 Fixes: b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18sfc: add support for skb->xmit_moreEdward Cree2-29/+43
Don't ring the doorbell, and don't do PIO. This will also prevent TX Push, because there will be more than one buffer waiting when the doorbell is rung. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18r8152: return -EBUSY for runtime suspendhayeswang1-7/+15
Remove calling cancel_delayed_work_sync() for runtime suspend, because it would cause dead lock. Instead, return -EBUSY to avoid the device enters suspending if the net is running and the delayed work is pending or running. The delayed work would try to wake up the device later, so the suspending is not necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18hyperv: Add handling of IP header with option field in netvsc_set_hash()Haiyang Zhang1-16/+10
In case that the IP header has optional field at the end, this patch will get the port numbers after that field, and compute the hash. The general parser skb_flow_dissect() is used here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18vxlan: fix a free after useLi RongQing1-0/+1
pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e390d062 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16ixgbe: check for vfs outside of sriov_num_vfs before dereferenceEmil Tantilov1-0/+3
The check for vfinfo is not sufficient because it does not protect against specifying vf that is outside of sriov_num_vfs range. All of the ndo functions have a check for it except for ixgbevf_ndo_set_spoofcheck(). The following patch is all we need to protect against this panic: ip link set p96p1 vf 0 spoofchk off BUG: unable to handle kernel NULL pointer dereference at 0000000000000052 IP: [<ffffffffa044a1c1>] ixgbe_ndo_set_vf_spoofchk+0x51/0x150 [ixgbe] Reported-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Add CONFIG_FM10K_VXLAN configuration optionAndy Zhou2-3/+14
Compiling with CONFIG_FM10K=y and VXLAN=m resulting in linking error: drivers/built-in.o: In function `fm10k_open': (.text+0x1f9d7a): undefined reference to `vxlan_get_rx_port' make: *** [vmlinux] Error 1 The fix follows the same strategy as I40E. Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Unlock mailbox on VLAN addition failuresMatthew Vick1-3/+4
After grabbing the mailbox lock and detecting an error, the lock must be released before the error code can be returned. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Check the host state when bringing the interface upMatthew Vick1-0/+1
Set the flag to fetch the host state before kicking off the service task that reads the host state when bringing the interface back up. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16vxlan: using pskb_may_pull as early as possibleLi RongQing1-4/+2
pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16vxlan: fix a use after free in vxlan_encap_bypassLi RongQing1-3/+5
when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16gianfar: Add FCS to rx buffer size (fix)Claudiu Manoil1-1/+1
For each Rx frame the eTSEC writes its FCS (Frame Check Sequence) to the Rx buffer. The eTSEC h/w manual states in the "Receive Buffer Descriptor Field Descriptions" table: "Data length is the number of octets written by the eTSEC into this BD's data buffer if L is cleared (the value is equal to MRBLR), or, if L is set, the length of the frame including *CRC*, FCB (if RCTRL[PRSDEP > 00), preamble (if MACCFG2[PreAmRxEn]=1), time stamp (if RCTRL[TS] = 1) and any padding (RCTRL[PAL])." Though the FCS bytes are removed by the driver before passing the skb to the net stack, the Rx buffer size computation does not currently take into account the FCS bytes (4 bytes). Because the Rx buffer size is multiple of 512 bytes, leaving out the FCS is not a problem for the default MTU of 1500, as the Rx buffer size is 1536 in this case. However, for custom MTUs, where the difference between the MTU size and the Rx buffer size is less, this can be a problem as the computed Rx buffer size won't be enough to accomodate the FCS for a received frame that is big enough (close to MTU size). In such case the received frame is considered to be incomplete (L flag not set in the RxBD status) and silently dropped. Note that the driver does not currently support S/G on Rx, so it has to compute its Rx buffer size based on the MTU of the device. Reported-by: Kristian Otnes <kotnes@cisco.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16virtio_net: fix use after freeMichael S. Tsirkin1-1/+3
commit 0b725a2ca61bedc33a2a63d0451d528b268cf975 net: Remove ndo_xmit_flush netdev operation, use signalling instead. added code that looks at skb->xmit_more after the skb has been put in TX VQ. Since some paths process the ring and free the skb immediately, this can cause use after free. Fix by storing xmit_more in a local variable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16net: fec: ptp: fix convergence issue to support LinuxPTP stackNimrod Andy3-42/+56
iMX6SX IEEE 1588 module has one hw issue in capturing the ATVR register. The current SW flow is: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; ts_counter_ns = ENET0->ATVR; The ATVR value is not expected value that cause LinuxPTP stack cannot be convergent. ENET Block Guide/ Chapter for the iMX6SX (PELE) address the issue: After set ENET_ATCR[Capture], there need some time cycles before the counter value is capture in the register clock domain. The wait-time-cycles is at least 6 clock cycles of the slower clock between the register clock and the 1588 clock. So need something like: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; wait(); ts_counter_ns = ENET0->ATVR; For iMX6SX, the 1588 ts_clk is fixed to 25Mhz, register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns (40ns * 6). The patch add 1us delay before cpu read ATVR register. Changes V2: Modify the commit/comments log to describe the issue clearly. Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15net: Add ndo_gso_checkTom Herbert2-2/+2
Add ndo_gso_check which a device can define to indicate whether is is capable of doing GSO on a packet. This funciton would be called from the stack to determine whether software GSO is needed to be done. A driver should populate this function if it advertises GSO types for which there are combinations that it wouldn't be able to handle. For instance a device that performs UDP tunneling might only implement support for transparent Ethernet bridging type of inner packets or might have limitations on lengths of inner headers. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15net: ks8842: use dmaengine_terminate_all() APIVinod Koul1-4/+2
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15stmmac: fix sti compatibililiesGiuseppe CAVALLARO2-5/+6
this patch is to fix the stmmac data compatibilities for all the SoCs inside the platform file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds2-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-15cxgb4 : Fix build failure in cxgb4 when ipv6 is disabled/not in-builtAnish Bhatt2-1/+9
cxgb4 ipv6 does not guard against ipv6 being disabled, or the standard ipv6 module vs inbuilt tri-state issue. This was fixed for cxgb4i & iw_cxgb4 but missed for cxgb4. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4i : Remove duplicated CLIP handling codeAnish Bhatt1-0/+7
cxgb4 already handles CLIP updates from a previous changeset for iw_cxgb4, there is no need to have this functionality in cxgb4i. Remove duplicated code Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15virtio_net: enable VQs early on restoreMichael S. Tsirkin1-0/+2
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after restore returns, virtio net violated this rule by using receive VQs within restore. To fix, call virtio_device_ready before using VQs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: fix use after free on allocation failureMichael S. Tsirkin1-0/+2
In the extremely unlikely event that driver initialization fails after RX buffers are added, virtio net frees RX buffers while VQs are still active, potentially causing device to use a freed buffer. To fix, reset device first - same as we do on device removal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: enable VQs earlyMichael S. Tsirkin1-0/+2
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after probe returns, virtio net violated this rule by using receive VQs within probe. To fix, call virtio_device_ready before using VQs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: minor cleanupMichael S. Tsirkin1-4/+2
goto done; done: return; is ugly, it was put there to make diff review easier. replace by open-coded return. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio-net: drop config_mutexMichael S. Tsirkin1-6/+1
config_mutex served two purposes: prevent multiple concurrent config change handlers, and synchronize access to config_enable flag. Since commit dbf2576e37da0fcc7aacbfbb9fd5d3de7888a3c1 workqueue: make all workqueues non-reentrant all workqueues are non-reentrant, and config_enable is now gone. Get rid of the unnecessary lock. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: drop config_enableMichael S. Tsirkin1-23/+4
Now that virtio core ensures config changes don't arrive during probing, drop config_enable flag in virtio net. On removal, flush is now sufficient to guarantee that no change work is queued. This help simplify the driver, and will allow setting DRIVER_OK earlier without losing config change notifications. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15qlcnic: Fix number of arguments in destroy tx context commandRajesh Borundia1-1/+1
o Number of arguments taken by destroy tx command is three instead of two. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15qlcnic: Fix programming number of arguments in a command.Rajesh Borundia1-2/+2
o Initially we were programming maximum number of arguments. Instead we should program number of arguments required in a command. o Maximum number of arguments for 82xx adapter is four. Fix it for GET_ESWITCH_STATS command. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4: Fix FW flash logic using ethtoolHariprasad Shenai3-6/+16
Use t4_fw_upgrade instead of t4_load_fw to write firmware into FLASH, since t4_load_fw doesn't co-ordinate with the firmware and the adapter can get hosed enough to require a power cycle of the system. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15stmmac: dwmac-sti: review the glue-logic for STi4xx and STiD127 SoCsGiuseppe CAVALLARO1-169/+205
This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15stmmac: make the STi Layer compatible to STiH407Giuseppe CAVALLARO1-0/+1
This adds the missing compatibility to the STiH407 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15stmmac: platform: fix FIXED_PHY support.Giuseppe CAVALLARO1-5/+10
On several STi platforms: e.g. stihxxx-b2120 an Ethernet switch is embedded and connected to the stmmac via RGMII mode. So this is managed by using the FIXED_PHY. In that case, the support in the platform needs to be fixed to allow the stmmac to dialog with the switch via fixed-link by using phy_bus_name property. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15dsa: mv88e6171: Fix tag_protocol checkGuenter Roeck1-1/+1
tag_protocol is now an enum, so drivers have to check against it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 10:28:14 +0300