summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07bnxt_en: Avoid sending firmware messages when AER error is detected.Vasundhara Volam2-3/+7
When the driver goes through PCIe AER reset in error state, all firmware messages will timeout because the PCIe bus is no longer accessible. This can lead to AER reset taking many minutes to complete as each firmware command takes time to timeout. Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages when either firmware is in fatal error state or when pci_channel_offline() is true. It now takes a more reasonable 20 to 30 seconds to complete AER recovery. Fixes: b4fff2079d10 ("bnxt_en: Do not send firmware messages if firmware is in error state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver"Mauro Carvalho Chehab2-5/+0
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore: with it applied, WiFi stops working, and the Kernel starts printing this message every second: wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186 Hardware name: HiKey970 (DT) Workqueue: events_freezable ieee80211_restart_work [mac80211] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore] sp : ffff8000126c3a60 x29: ffff8000126c3a60 x28: 00000000000025de x27: 0000000000000010 x26: 0000000000000005 x25: ffff0001a5d49e80 x24: ffff8000092cf580 x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8 x21: ffff0001b7e46200 x20: 00000000fffffffb x19: ffff0001a78e6400 x18: 0000000000000030 x17: 0000000000000001 x16: 0000000000000001 x15: ffff0001b7e46670 x14: ffffffffffffffff x13: ffff8000926c37d7 x12: ffff8000126c37e0 x11: ffff800011e01000 x10: ffff8000120526d0 x9 : 0000000000000000 x8 : 3431206572756c69 x7 : 6166206574756365 x6 : 0000000000000c2c x5 : 0000000000000000 x4 : ffff0001bf1361e8 x3 : ffff0001bf1790b0 x2 : 0000000000000000 x1 : ffff0001a5d49e80 x0 : 0000000000000001 Call trace: wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] wl12xx_queue_recovery_work+0x24/0x30 [wlcore] wl1271_cmd_set_sta_key+0x258/0x25c [wlcore] wl1271_set_key+0x7c/0x2dc [wlcore] wlcore_set_key+0xe4/0x360 [wlcore] wl18xx_set_key+0x48/0x1d0 [wl18xx] wlcore_op_set_key+0xa4/0x180 [wlcore] ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211] ieee80211_reenable_keys+0x70/0x110 [mac80211] ieee80211_reconfig+0xa00/0xca0 [mac80211] ieee80211_restart_work+0xc4/0xfc [mac80211] process_one_work+0x1cc/0x350 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x30 ---[ end trace b1f722abf9af5919 ]--- wlcore: WARNING could not set keys wlcore: ERROR Could not add or replace key wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5) wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79 wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39 wlcore: down wlcore: down ieee80211 phy0: Hardware restart was requested mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ Tested on Hikey 970. This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
2020-09-06net: dsa: rtl8366: Properly clear member configLinus Walleij1-7/+13
When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06net: macb: fix for pause frame receive enable bitParshuram Thombare1-2/+1
PAE bit of NCFGR register, when set, pauses transmission if a non-zero 802.3 classic pause frame is received. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06cxgb4: Fix offset when clearing filter byte countersGanji Aravind1-3/+6
Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06hinic: bump up the timeout of UPDATE_FW cmdLuo bin1-0/+4
Firmware erases the entire flash region which may take several seconds before flashing, so we bump up the timeout to ensure this cmd won't return failure. Fixes: 5e126e7c4e52 ("hinic: add firmware update support") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-06hinic: bump up the timeout of SET_FUNC_STATE cmdLuo bin1-5/+11
We free memory regardless of the return value of SET_FUNC_STATE cmd in hinic_close function to avoid memory leak and this cmd may timeout when fw is busy with handling other cmds, so we bump up the timeout of this cmd to ensure it won't return failure. Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-05drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devicesXie He1-1/+2
PVC devices are virtual devices in this driver stacked on top of the actual HDLC device. They are the devices normal users would use. PVC devices have two types: normal PVC devices and Ethernet-emulating PVC devices. When transmitting data with PVC devices, the ndo_start_xmit function will prepend a header of 4 or 10 bytes. Currently this driver requests this headroom to be reserved for normal PVC devices by setting their hard_header_len to 10. However, this does not work when these devices are used with AF_PACKET/RAW sockets. Also, this driver does not request this headroom for Ethernet-emulating PVC devices (but deals with this problem by reallocating the skb when needed, which is not optimal). This patch replaces hard_header_len with needed_headroom, and set needed_headroom for Ethernet-emulating PVC devices, too. This makes the driver to request headroom for all PVC devices in all cases. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds32-164/+261
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan1-4/+13
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: dp83867: Fix WoL SecureOn passwordDan Murphy1-2/+2
Fix the registers being written to as the values were being over written when writing the same registers. Fixes: caabee5b53f5 ("net: phy: dp83867: support Wake on LAN") Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03nfp: flower: fix ABI mismatch between driver and firmwareLouis Peens1-0/+2
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa12240 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03drivers/net/wan/hdlc: Change the default of hard_header_len to 0Xie He1-1/+1
Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: gemini: Fix another missing clk_disable_unprepare() in probeDan Carpenter1-17/+17
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov1-1/+1
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02amd-xgbe: Add support for new port modeShyam Sundar S K1-0/+13
Add support for a new port mode that is a backplane connection without support for auto negotiation. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: usb: dm9601: Add USB ID of Keenetic Plus DSLKamil Lorenc1-0/+4
Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by: Kamil Lorenc <kamil@re-ws.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()Shung-Hsi Yu1-1/+1
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a max_order of 31 will be passed to mlx_buddy_init(), which results in s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to kvmalloc_array() failure when it is converted to size_t. mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting mlx4_core: probe of 0000:b1:00.0 failed with error -12 Fix this issue by changing the left shifting operand from a signed literal to an unsigned one. Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link modeGrygorii Strashko1-0/+2
In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL register to enable support for 100Mbit link speed. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31cxgb4: fix thermal zone device registrationPotnuri Bharat Teja1-2/+6
When multiple adapters are present in the system, pci hot-removing second adapter leads to the following warning as both the adapters registered thermal zone device with same thermal zone name/type. Therefore, use unique thermal zone name during thermal zone device initialization. Also mark thermal zone dev NULL once unregistered. [ 414.370143] ------------[ cut here ]------------ [ 414.370944] sysfs group 'power' not found for kobject 'hwmon0' [ 414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281 sysfs_remove_group+0x76/0x80 [ 414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33 [ 414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016 [ 414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54 [ 414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286 [ 414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510 [ 414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000 [ 414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008 [ 414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020 [ 414.395661] FS: 00007fd2a7171740(0000) GS:ffff8ee2de200000(0000) knlGS:0000000000000000 [ 414.396825] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0 [ 414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 414.401473] Call Trace: [ 414.402685] device_del+0x89/0x400 [ 414.403819] device_unregister+0x16/0x60 [ 414.405024] hwmon_device_unregister+0x44/0xa0 [ 414.406112] thermal_remove_hwmon_sysfs+0x196/0x200 [ 414.407256] thermal_zone_device_unregister+0x1b5/0x1f0 [ 414.408415] cxgb4_thermal_remove+0x3c/0x4f [cxgb4] [ 414.409668] remove_one+0x212/0x290 [cxgb4] [ 414.410875] pci_device_remove+0x36/0xb0 [ 414.412004] device_release_driver_internal+0xe2/0x1c0 [ 414.413276] pci_stop_bus_device+0x64/0x90 [ 414.414433] pci_stop_and_remove_bus_device_locked+0x16/0x30 [ 414.415609] remove_store+0x75/0x90 [ 414.416790] kernfs_fop_write+0x114/0x1b0 [ 414.417930] vfs_write+0xcf/0x210 [ 414.419059] ksys_write+0xa7/0xe0 [ 414.420120] do_syscall_64+0x4c/0xa0 [ 414.421278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 414.422335] RIP: 0033:0x7fd2a686afd0 [ 414.423396] Code: Bad RIP value. [ 414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0 [ 414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001 [ 414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740 [ 414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400 [ 414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 414.431027] irq event stamp: 76300 [ 414.435678] ---[ end trace 13865acb4d5ab00f ]--- Fixes: b18719157762 ("cxgb4: Add thermal zone support") Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31drivers/net/wan/hdlc_cisco: Add hard_header_lenXie He1-0/+1
This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31ionic: fix txrx work accountingShannon Nelson1-10/+3
Take the tx accounting out of the work_done calculation to prevent a possible duplicate napi_schedule call when under high Tx stress but low Rx traffic. Fixes: b14e4e95f9ec ("ionic: tx separate servicing") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28net: dsa: mt7530: fix advertising unsupported 1000baseT_HalfLanden Chao1-1/+1
Remove 1000baseT_Half to advertise correct hardware capability in phylink_validate() callback function. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()Murali Karicheri1-6/+21
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid() - pm_runtime_get_sync() returns non zero value. This results in non zero value return to caller which will be interpreted as error. So overwrite ret with zero. - If VID matches with port VLAN VID, then set error code. - Currently when VLAN interface is deleted, all of the VLAN mc addresses are removed from ALE table, however the return values from ale function calls are not checked. These functions can return error code -ENOENT. But that shouldn't happen in a normal case. So add error print to catch the situations so that these can be investigated and addressed. return zero in these cases as these are not real error case, but only serve to catch ALE table update related issues and help address the same in the driver. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()Himadri Pandya1-1/+1
The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27mwifiex: Increase AES key storage size to 256 bitsMaximilian Luz2-3/+3
Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: Kaloyan Nikolov <konik98@gmail.com> Tested-by: Kaloyan Nikolov <konik98@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
2020-08-27mt76: mt7915: use ieee80211_free_txskb to free tx skbsFelix Fietkau2-3/+7
Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only by accident, because a mac80211 issue breaks AQL on drivers with firmware rate control that report the rate via ieee80211_tx_status_ext as struct rate_info. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200812144943.91974-1-nbd@nbd.name
2020-08-27mt76: mt7615: use v1 MCU API on MT7615 to fix issues with adding/removing ↵Felix Fietkau1-1/+2
stations The implementation of embedding WTBL update inside the STA_REC update is buggy on the MT7615 v2 firmware. This leads to connection issues after a station has connected and disconnected again. Switch to the v1 MCU API ops, since they have received much more testing and should be more stable. On MT7622 and later, the v2 API is more actively used, so we should keep using it as well. Fixes: 6849e29ed92e ("mt76: mt7615: add starec operating flow for firmware v2") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200812102332.11812-1-nbd@nbd.name
2020-08-27bnxt: don't enable NAPI until rings are readyJakub Kicinski1-8/+4
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <rsher@fb.com> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27drivers/net/wan/lapbether: Set network_header before transmittingXie He1-0/+2
Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: cdc_ncm: Fix build errorYueHaibing1-0/+1
If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails: drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter' Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: hns3: Fix for geneve tx checksum bugYi Li1-2/+4
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing <libing@winhong.com> Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Setup default RSS map in all scenarios.Michael Chan1-9/+30
The recent changes to support user-defined RSS map assume that RX rings are always reserved and the default RSS map is set after the RX rings are successfully reserved. If the firmware spec is older than 1.6.1, no ring reservations are required and the default RSS map is not setup at all. In another scenario where the fw Resource Manager is older, RX rings are not reserved and we also end up with no valid RSS map. Fix both issues in bnxt_need_reserve_rings(). In both scenarios described above, we don't need to reserve RX rings so we need to call this new function bnxt_check_rss_map_no_rmgr() to setup the default RSS map when needed. Without valid RSS map, the NIC won't receive packets properly. Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: init RSS table for Minimal-Static VF reservationEdwin Peer1-8/+7
There are no VF rings available during probe when the device is configured using the Minimal-Static reservation strategy. In this case, the RSS indirection table can only be initialized later, during bnxt_open_nic(). However, this was not happening because the rings will already have been reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings() to return false in bnxt_reserve_rings() and bypass the RSS table init. Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into __bnxt_reserve_rings(), which is common to both paths and is called whenever ring configuration is changed. After doing this, the RSS table init that must be called from bnxt_init_one() happens implicitly via bnxt_set_default_rings(), necessitating doing the allocation earlier in order to avoid a null pointer dereference. Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: fix HWRM error when querying VF temperatureEdwin Peer1-4/+7
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for VFs. This produces unpleasing error messages in the log when temp1_input is queried via the hwmon sysfs interface from a VF. The error is harmless and expected, so silence it and return unknown as the value. Since the device temperature is not particularly sensitive information, provide flexibility to change this policy in future by silencing the error rather than avoiding the HWRM call entirely for VFs. Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <msmith626@gmail.com> Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix possible crash in bnxt_fw_reset_task().Michael Chan1-2/+8
bnxt_fw_reset_task() is run from a delayed workqueue. The current code is not cancelling the workqueue in the driver's .remove() method and it can potentially crash if the device is removed with the workqueue still pending. The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work() also needs to check that this flag is set before scheduling. This will guarantee that no rescheduling will be done after it is cancelled. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix PCI AER error recovery flowVasundhara Volam1-0/+3
When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.Michael Chan1-9/+2
We are returning the wrong count for ETH_SS_STATS in get_sset_count() when XDP or TCs are enabled. In a recent commit, we got rid of irrelevant counters when the ring is RX only or TX only, but we did not make the proper adjustments for the count. As a result, when we have XDP or TCs enabled, we are returning an excess count because some of the rings are TX only. This causes ethtool -S to display extra counters with no counter names. Fix bnxt_get_num_ring_stats() by not assuming that all rings will always have RX and TX counters in combined mode. Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam1-0/+3
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Don't query FW when netif_running() is false.Pavan Chebbi1-1/+1
In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: dp83869: Fix RGMII internal delay configurationDaniel Gorsulowski1-6/+6
The RGMII control register at 0x32 indicates the states for the bits RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows: RGMII Transmit/Receive Clock Delay 0x0 = RGMII transmit clock is shifted with respect to transmit/receive data. 0x1 = RGMII transmit clock is aligned with respect to transmit/receive data. This commit fixes the inversed behavior of these bits Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26ibmvnic fix NULL tx_pools and rx_tools issue at do_resetMingming Cao1-1/+14
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools and rx_pools to avoid re-allocating the long term buffer. However there is a window inside do_reset that the tx_pools and rx_pools were freed before re-initialized making it possible to deference null pointers. This patch fix this issue by always check the tx_pool and rx_pool are not NULL after ibmvnic_login. If so, re-allocating the pools. This will avoid getting into calling reset_tx/rx_pools with NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in reset_tx_pools and reset_rx_pools to safe handle NULL pointer case. Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host portMurali Karicheri1-1/+1
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri1-1/+1
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: dsa: mt7530: Add of_node_put() before break and return statementsSumera Priyadarsini1-1/+4
Every iteration of for_each_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in mt7530.c by inserting of_node_put() before the break and return statements. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25gtp: add GTPA_LINK info to msg sent to userspaceNicolas Dichtel1-0/+1
During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25sfc: fix boolreturn.cocci warning and rename functionEdward Cree1-4/+4
check_fcs() was returning bool as 0/1, which was a sign that the sense of the function was unclear: false was good, which doesn't really match a name like 'check_$thing'. So rename it to ef100_has_fcs_error(), and use proper booleans in the return statements. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ocelot: Add of_node_put() before return statementSumera Priyadarsini1-0/+1
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: arc_emac: Fix memleak in arc_mdio_probeDinghao Liu1-0/+1
When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: dsa: sja1105: Do not use address of compatible member in ↵Nathan Chancellor1-1/+1
sja1105_check_device_id Clang warns: drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of array 'match->compatible' will always evaluate to 'true' [-Wpointer-bool-conversion] for (match = sja1105_dt_ids; match->compatible; match++) { ~~~ ~~~~~~~^~~~~~~~~~ 1 warning generated. We should check the value of the first character in compatible to see if it is empty or not. This matches how the rest of the tree iterates over IDs. Fixes: 0b0e299720bb ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 12:52:10 +0300