summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-09-08Merge tag 'master-2014-09-04' of ↵David S. Miller4-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-05 Please pull this batch of fixes intended for the 3.17 stream... For the mac80211 bits, Johannes says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." For the iwlwifi bits, Emmanuel says: "I revert a patch that disabled CTS to self in dvm because users reported issues. The revert is CCed to stable since the offending patch was sent to stable too. I also bump the firmware API versions since a new firmware is coming up. On top of that, Marcel fixes a bug I introduced while fixing a bug in our Kconfig file." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06amd-xgbe: Enable interrupts for all management countersLendacky, Thomas1-2/+2
As the management counters reach a threshold they will generate an interrupt so the value can be saved and the counter reset. The current code does not enable this interrupt on all counters. This can result in inaccurate statistics. Update the code to enable all the counters to generate an interrupt when its threshold is exceeded. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06amd-xgbe: Treat certain counter registers as 64 bitLendacky, Thomas1-82/+108
Even if the management counters are configured to be 32 bit register values, the [rt]xoctetcount_gb and [rt]xoctetcount_g counters are always 64 bit counter registers. Since they are not being treated as 64 bit values, these statistics are being reported incorrectly (ifconfig, ethtool, etc.). Update the routines used to read the registers to access the "hi" register (an offset of 4 from the "lo" register) to create a 64 bit value for these 64 bit counters. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06greth: moved TX ring cleaning to NAPI rx poll funcDaniel Hellstrom2-39/+49
This patch does not affect the 10/100 GRETH MAC. Before all GBit GRETH TX descriptor ring cleaning was done in start_xmit(), when descriptor list became full it activated TX interrupt to start the NAPI rx poll function to do TX ring cleaning. With this patch the TX descriptor ring is always cleaned from the NAPI rx poll function, triggered via TX or RX interrupt. Otherwise we could end up in TX frames being sent but not reported to the stack being sent. On the 10/100 GRETH this is not an issue since the SKB is copied&aligned into private buffers so that the SKB can be freed directly on start_xmit() Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06cnic : Cleanup CONFIG_IPV6 & VLAN checkAnish Bhatt2-3/+3
The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: Anish Bhatt <anish@chelsio.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06bnx2x: Fix link problems for 1G SFP RJ45 moduleYaniv Rosner3-36/+50
When 1G SFP RJ45 module is detected, driver must reset the Tx laser in order to prevent link issues. As part of change, the link_attr_sync was relocated from vars to params. Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-063c59x: avoid panic in boomerang_start_xmit when finding page address:Neil Horman1-4/+4
This bug was reported on a very old kernel (RHEL6, 2.6.32-491.el6): BUG: unable to handle kernel paging request at 00800000 IP: [<c04107b5>] nommu_map_page+0x15/0x110 *pdpt = 000000003454f001 *pde = 000000003f03d067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/online Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs p4_clockmod ipv6 ppdev parport_pc parport microcode iTCO_wdt iTCO_vendor_support 3c59x mii dcdbas serio_raw snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 sg lpc_ich mfd_core ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mperf] Pid: 4219, comm: nfsd Not tainted 2.6.32-491.el6.i686 #1 Dell Computer Corporation OptiPlex GX240 /OptiPlex GX240 EIP: 0060:[<c04107b5>] EFLAGS: 00010246 CPU: 0 EIP is at nommu_map_page+0x15/0x110 EAX: 00000000 EBX: c0a83480 ECX: 00000000 EDX: 00800000 ESI: 00000000 EDI: f70e7860 EBP: e2d09b54 ESP: e2d09b24 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process nfsd (pid: 4219, ti=e2d08000 task=e2ceaaa0 task.ti=e2d08000) Stack: 00000056 00000000 0000000e c65efd38 00000020 00000296 00000206 00000206 <0> c050c850 c0a83480 e2cef154 00000001 e2d09ba8 f8fcd585 00000510 00000001 <0> 00000000 00000000 f5172200 f8fdac00 0039ef8c f5277020 f70e7860 00000510 Call Trace: [<c050c850>] ? page_address+0xd0/0xe0 [<f8fcd585>] ? boomerang_start_xmit+0x3b5/0x520 [3c59x] [<c07b2975>] ? dev_hard_start_xmit+0xe5/0x400 [<f9182b00>] ? ip6_output_finish+0x0/0xf0 [ipv6] [<c07ca053>] ? sch_direct_xmit+0x113/0x180 [<c07d5588>] ? nf_hook_slow+0x68/0x120 [<c07b2ea5>] ? dev_queue_xmit+0x1b5/0x290 [<f9182b6d>] ? ip6_output_finish+0x6d/0xf0 [ipv6] [<f9184cb8>] ? ip6_xmit+0x3e8/0x490 [ipv6] [<f91ab9f9>] ? inet6_csk_xmit+0x289/0x2f0 [ipv6] [<c07f6451>] ? tcp_transmit_skb+0x431/0x7f0 [<c07a403f>] ? __alloc_skb+0x4f/0x140 [<c07f85a2>] ? tcp_write_xmit+0x1c2/0xa50 [<c07f90b1>] ? __tcp_push_pending_frames+0x31/0xe0 [<c07ea47a>] ? tcp_sendpage+0x44a/0x4b0 [<c07ea030>] ? tcp_sendpage+0x0/0x4b0 [<c079be1e>] ? kernel_sendpage+0x4e/0x90 [<f8457bb9>] ? svc_send_common+0xc9/0x120 [sunrpc] [<f8457c85>] ? svc_sendto+0x75/0x1f0 [sunrpc] [<c060d0d9>] ? _atomic_dec_and_lock+0x59/0x90 [<f87d55d0>] ? nfs3svc_encode_readres+0x0/0xc0 [nfsd] [<f845876d>] ? svc_authorise+0x2d/0x40 [sunrpc] [<f87d4410>] ? nfs3svc_release_fhandle+0x0/0x10 [nfsd] [<f8455721>] ? svc_process_common+0xf1/0x5a0 [sunrpc] [<f8457e86>] ? svc_tcp_sendto+0x36/0xa0 [sunrpc] [<f8461778>] ? svc_send+0x98/0xd0 [sunrpc] [<f87c698c>] ? nfsd+0xac/0x140 [nfsd] [<c04470e0>] ? complete+0x40/0x60 [<f87c68e0>] ? nfsd+0x0/0x140 [nfsd] [<c04802ac>] ? kthread+0x7c/0xa0 [<c0480230>] ? kthread+0x0/0xa0 [<c0409f9f>] ? kernel_thread_helper+0x7/0x10 Code: 8d b6 00 00 00 00 eb f8 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 30 89 75 f8 31 f6 89 7d fc 89 c7 89 c8 89 5d f4 <8b> 1a 8b 4d 08 c1 eb 19 c1 e3 04 8b 9b c0 29 c7 c0 83 e3 fc 29 But the problem seems to still exist upstream. It seems on 32 bit kernels page_address() can reutrn a NULL value in some circumstances, and the pci_map_single api isn't prepared to handle that (on this system it results in a bogus pointer deference in nommu_map_page. The fix is pretty easy, if we convert the 3c59x driver to use the more convieient skb_frag_dma_map api we don't need to find the virtual address of the page at all, and page gets mapped to the hardware properly. Verified to fix the problem as described by the reporter. Applies to the net tree Change Notes: v2) Converted PCI_DMA_TODEVICE to DMA_TO_DEVICE. Thanks Dave! v3) Actually Run git commit after making changes to v2 :) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: klassert@mathematik.tu-chemnitz.de CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macrosChen Gang1-5/+0
They are use less, and may generate compiling warnings, so remove them (microblaze, arc, arm64, and unicore32 have already defined PCI_IOBASE). The related warnings (with allmodconfig under microblaze): CC [M] drivers/net/fddi/skfp/skfddi.o In file included from drivers/net/fddi/skfp/skfddi.c:95:0: drivers/net/fddi/skfp/h/skfbi.h:151:0: warning: "PCI_IOBASE" redefined #define PCI_IOBASE 0xffffff00L /* Bit 31..8: I/O Base address */ ^ In file included from include/linux/io.h:22:0, from include/linux/pci.h:31, from drivers/net/fddi/skfp/skfddi.c:82: ./arch/microblaze/include/asm/io.h:33:0: note: this is the location of the previous definition #define PCI_IOBASE ((void __iomem *)_IO_BASE) ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05VMXNET3: Check for map error in vmxnet3_set_mcAndy King2-9/+10
We should check if the map of the table actually succeeds, and also free resources accordingly. Version bumped to 1.2.1.0 Acked-by: Shelley Gong <shelleygong@vmware.com> Acked-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-04Merge branch 'for-john' of ↵John W. Linville4-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-09-03amd-xgbe: Fix initialization of the wrong spin lockLendacky, Thomas1-1/+1
During allocation and initialization of the network driver structures, the wrong pointer is used to initialize a spin lock. Fix the spin lock initialization by using the proper pointer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03bnx2x: Configure device endianity on driver load and reset endianity on removal.Manish Chopra1-18/+39
Some hosts can be both little and big endian. In certain scenarios a big endian kernel can kexec a little endian kernel. This patch fixes this case from both ends: 1) Return endianity to original values on shutdown (in case little endian kernel boots after we shutdown). 2) Do not rely on HW reset values when loading driver in little endian kernel but configure them explicitly (in case previous kernel was big endian and did not reset the HW). Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03net: calxedaxgmac: fix driver dependenciesBartlomiej Zolnierkiewicz1-0/+1
Calxeda 1G/10G XGMAC Ethernet support should be available only on Calxeda ECX-1000/2000 (Highbank/Midway) platforms. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03net: sh_eth: fix driver dependenciesBartlomiej Zolnierkiewicz1-0/+1
Renesas SuperH Ethernet support should be available only on Renesas ARM SoCs and SuperH architecture. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03net: lpc_eth: Fix crash on ip link upRoland Stigge1-0/+3
When a link is already up, the following sequence makes the kernel block completely: ip link set dev eth0 down ip link set dev eth0 up This is because on suspended phy, the following lines __lpc_eth_reset(pldat); __lpc_eth_init(pldat); make the LPC ethernet core block (see LPC32x0 manual). The PHY needs to be (re-)activated low-level first. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03tg3: prevent ifup/ifdown during PCI error recoveryIvan Vecera2-0/+17
The patch fixes race conditions between PCI error recovery callbacks and potential ifup/ifdown. First, if ifup (tg3_open) is called between tg3_io_error_detected() and tg3_io_resume() then tp->timer is armed twice before expiry. Once during tg3_open() and again during tg3_io_resume(). This results in BUG at kernel/time/timer.c:945. Second, if ifdown (tg3_close) is called between tg3_io_error_detected() and tg3_io_resume() then tg3_napi_disable() is called twice without a tg3_napi_enable between. Once during tg3_io_error_detected() and again during tg3_close(). The tg3_io_resume() then hangs on rtnl_lock(). v2: Added logging messages per Prashant's request Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Issue mbox commands on correct mboxHariprasad Shenai1-2/+4
A couple of RDMA-related called to t4_query_params() were issuing mbox commands on mbox0 instead of mbox4. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Avoid dumping Write-only registers in register dumpHariprasad Shenai1-2/+4
Avoid dumping MPS_RPLC_MAP_CTL for reg dumps; this is a Write-Only register. Reading this register may cause MPS TCAM corruption. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Detect and display firmware reported errorsHariprasad Shenai2-1/+41
The adapter firmware can indicate error conditions to the host. If the firmware has indicated an error, print out the reason for the firmware error. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Fix T5 adapter accessing T4 adapter registersHariprasad Shenai3-11/+24
Fixes few register access for both T4 and T5. PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS & PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS is T4 only register don't let T5 access them. For T5 MA_PARITY_ERROR_STATUS2 is additionally read. MPS_TRC_RSS_CONTROL is T4 only register, for T5 use MPS_T5_TRC_RSS_CONTROL. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Fixed the code to use correct length for part numberHariprasad Shenai1-1/+10
Previously it was using the length value of serial number. Also added macro for VPD unique identifier (0x82). Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02cxgb4: Fix for handling 1Gb/s SFP+ Transceiver ModulesHariprasad Shenai1-0/+1
We previously assumed that a Port's Capabilities and Advertised Capabilities would never change from Port Initialization time. This is no longer true when we can have 10Gb/s and 1Gb/s SFP+ Transceiver Modules randomly swapped. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02stmmac: only remove RXCSUM feature if no rx coe is availableGiuseppe CAVALLARO1-2/+0
In case of the HW is not able to do the receive checksum offloading the only feature to remove is NETIF_F_RXCSUM. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02stmmac: fix the rx csum featureGiuseppe CAVALLARO3-3/+31
For new GMACs it is possible to turn-on/off the COE. In the current driver, when disabled the Rx-checksum via ethtool, the tool reported that csum was disabled but the HW continued to set the IPC. Indeed this is because the fix_features allows this. So the patch fixes this problem by adding the set_features. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02amd-xgbe: Use the Tx queue count for Tx flow control supportLendacky, Thomas1-2/+2
When configuring Tx flow control the Rx queue count was used instead of the Tx queue count for looping through the Tx hardware queues. Fix the code to use the Tx queue count. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02amd-xgbe: Fix the xpcs mmd debugfs supportLendacky, Thomas1-4/+4
The debugfs support for the xpcs registers did not properly use the specified mmd (xpcs_mmd entry) which resulted in the default mmd value always being used. Update the debugfs support to generate the proper mmd register value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02amd-xgbe: Reported fifo size from hardware is not correctLendacky, Thomas2-2/+7
The fifo size reported by the hardware is not correct. Add support to limit the reported size to what is actually present. Also, fix the argument types used in the fifo size calculation function. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02amd-xgbe: Check for Tx hardware queue flushing supportLendacky, Thomas4-3/+12
The flushing of the Tx hardware queues is only supported at a certain level of the hardware. Retrieve the current version of the hardware and use that to determine if flushing is supported. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02drivers: net: NET_XGENE should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `xgene_enet_delete_ring': xgene_enet_main.c:(.text+0x28755a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgene_enet_setup_tx_desc': xgene_enet_main.c:(.text+0x287774): undefined reference to `dma_map_single' xgene_enet_main.c:(.text+0x287780): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgene_enet_tx_completion': xgene_enet_main.c:(.text+0x2878e6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xgene_enet_refill_bufpool': xgene_enet_main.c:(.text+0x2879d4): undefined reference to `dma_map_single' xgene_enet_main.c:(.text+0x2879e0): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgene_enet_rx_frame': xgene_enet_main.c:(.text+0x287aaa): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xgene_enet_free_desc_ring': xgene_enet_main.c:(.text+0x287f98): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgene_enet_create_desc_ring': xgene_enet_main.c:(.text+0x28808e): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `xgene_enet_probe': xgene_enet_main.c:(.text+0x2883d4): undefined reference to `dma_set_mask' xgene_enet_main.c:(.text+0x2883ec): undefined reference to `dma_supported' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02Merge tag 'master-2014-08-25' of ↵David S. Miller4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-08-28 Please pull this batch of fixes intended for the 3.17 stream. For the Bluetooth/6LowPAN/802.15.4 bits, Johan says: 'It contains a connection reference counting fix for LE where a connection might stay up even though it should get disconnected. The other 802.15.4 6LoWPAN related patches were sent to the bluetooth tree by Alexander Aring and described as follows by him: " these patches contains patches for the bluetooth branch. This series includes memory leak fixes and an errno value fix. Also there are two patches for sending and receiving 1280 6LoWPAN packets, which makes the IEEE 802.15.4 6LoWPAN stack more RFC compliant. "' Along with that... Alexey Khoroshilov fixes a use-after-free bug on at76c50x-usb. Hauke Mehrtens adds a PCI ID to bcma. Himangi Saraogi fixes a silly "A || A" test in rtlwifi. Larry Finger adds a device ID to rtl8192cu. Maks Naumov fixes a strncmp argument in ath9k. Álvaro Fernández Rojas adds a PCI ID to ssb. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01iwlwifi: bump firmware API version to 10 for 7000 and 8000Emmanuel Grumbach2-3/+3
New firmware on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-01stmmac: fix PLS bit setting when EEE is activeGiuseppe CAVALLARO1-4/+3
In case of PLS is active the PLS (PHY Link Status) bit in the Reg12 has to be set to allow the MAC to asserts the LPI pattern when the link is ok. Signed-off-by: nandini sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01stmmac: never check EEE in case of a switch is attachedGiuseppe CAVALLARO1-0/+5
This patch is to skip the EEE initialisation when the stmmac is using a switch (with a fixed phy support). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01stmmac: fix LPI TW timer value to 20.5us.nandini sharma1-1/+1
The value for LPI TW timer has to be updated to 0x1E that is the hardcoded value of 20.5us and it will apply to all EEE enabled Remote PHYs. Disadvantage is for PHY's that support lesser wakeup time but we can accept it waiting to implement LLDP to negotiate the Wakeup time of Remote PHY. Signed-off-by: nandini sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01stmmac: fix the EEE LPI Macro definitions.nandini sharma1-4/+4
This patch is to fix the definition of macros for EEE otherwise the LPI TX/RX entry/exit cannot be properly managed. Signed-off-by: Nandini Sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31iwlwifi: Remove module build requirement for Intel Wireless WiFiMarcel Holtmann1-2/+0
The CONFIG_IWLDVM and CONFIG_IWLMVM currently have a "depends on m" as its requirement forcing it to be build as module. This is not needed and thus just remove it. Fixes: ae7486a2b734 ("iwlwifi: fix Kconfig issues") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> [Squashed 2 commites for MVM and DVM] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-08-31Revert "iwlwifi: dvm: don't enable CTS to self"Emmanuel Grumbach1-0/+12
This reverts commit 43d826ca5979927131685cc2092c7ce862cb91cd. This commit caused packet loss. Cc: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-08-30net/mlx4: Move the tunnel steering helper function to mlx4_coreOr Gerlitz2-29/+40
Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-30stmmac: fix dma api misuseGiuseppe CAVALLARO5-27/+79
Enabling DMA_API_DEBUG, warnings are reported at runtime because the device driver frees DMA memory with wrong functions and it does not call dma_mapping_error after mapping dma memory. The first problem is fixed by of introducing a flag that helps us keeping track which mapping technique was used, so that we can use the right API for unmap. This approach was inspired by the e1000 driver, which uses a similar technique. Signed-off-by: Andre Draszik <andre.draszik@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Denis Kirjanov <kda@linux-powerpc.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-30stmmac: ptp: fix the reference clockGiuseppe CAVALLARO3-6/+18
The PTP reference clock, used for setting the addend in the Timestamp Addend Register, was erroneously hard-coded (as reported in the databook just as example). The patch removes the macro named: STMMAC_SYSCLOCK and allows to use a reference clock (clk_ptp_ref_i) that can be passed from the platform. If not passed, the main driver clock will be used as default; note that this can be fine on some platforms. Note that, prior this patch, using the old STMMAC_SYSCLOCK on some platforms, as side effect, the ptp clock can move faster/slower than the system clock. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-30stmmac: fix tipo on mmc crc errorGiuseppe CAVALLARO3-3/+3
This patch is to fix a typo on mmc rx crc error when reported by ethtool. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-30stmmac: prevent false carrier sense detectionGiuseppe CAVALLARO1-1/+1
This patch is to w/a a problem that happens on some boxes when run at 10Mbps Half duplex mode. During the transmission the CSR signal is asserted for some time and the frames aborted because of carrier sense error. This is reported by MMC HW counter: txcarrier signal. This actually is a false carrier so the frames are good and there is no reason to ask for dropping them. This patch so disables the Carrier Sense During Transmission and this means that the MAC transmitter ignore the CRS signal during frame transmission in Half-Duplex mode. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Vince Bridgers <vbridgers2013@gmail.com> Acked-by: Ley Foon Tan <lftan@altera.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28phy: fix EEE checks inside the phy_init_eee.Giuseppe CAVALLARO1-9/+9
According to the Std 802.3az if the EEE Adv (Reg 7.60), Link partner ability (Reg 7.61) and EEE capability (Register 3.20) bits return 0 this means no EEE is supported. So this patch fixes the checks inside the phy_init_eee function. Signed-off-by: Nandini Sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26mvneta: Add missing if_vlan.h include.David S. Miller1-0/+1
drivers/net/ethernet/marvell/mvneta.c: In function 'mvneta_skb_tx_csum': drivers/net/ethernet/marvell/mvneta.c:1374:3: error: implicit declaration of function 'vlan_get_protocol' [-Werror=implicit-function-declaration] __be16 l3_proto = vlan_get_protocol(skb); ^ Reporeted-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26xen-netback: move netif_napi_add before binding interruptWei Liu1-3/+3
Interrupt is enabled when bind_interdomain_evtchn_to_irqhandler returns. If there's interrupt pending interrupt handler is invoked. NAPI needs to be initialised before binding interrupt otherwise the interrupt handler will try to scheduling a NAPI instance that is not initialised yet, resulting in kernel OOPS. This fixes a regression introduced in ea2c5e13 ("xen-netback: move NAPI add/remove calls"). Ideally function calls to create kthreads should also be moved before binding but I intent to fix this regression with minimal changes and refactor the code with another patch. Reported-by: Thomas Leonard <talex5@gmail.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26qlge: Fix TSO for non-accelerated vlan trafficVlad Yasevich1-2/+3
This device claims TSO support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to send TSO traffic. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO information. This results in corrupted frames sent on the wire. This patch extracts the protocol value correctly by using a vlan_get_protocol() helper and corrects corrupt TSO frames. CC: Shahed Shaikh <shahed.shaikh@qlogic.com> CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> CC: Ron Mercer <ron.mercer@qlogic.com> CC: linux-driver@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26mvneta: Fix TSO and checksum for non-acceleration vlan trafficVlad Yasevich1-3/+4
This driver doesn't appear to support vlan acceleration at all. However, it does claim to support TSO and IP checksums for vlan devices. Thus any configured vlan device would end up passing down partial checksums or TSO frames. The driver also uses the value from skb->protocol to determine TSO and checksum offload information, but assumes that skb->protocol holds the l3 protocol information. As a result, vlan traffic with partial checksums or TSO will fail those checks and TSO will not happen. Fix this by using vlan_get_protocol() helper. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26i40evf: Fix TSO and hw checksums for non-accelerated vlan packets.Vlad Yasevich1-1/+1
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO and hw checksums. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO and checksum information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. Fix this by using vlan_get_protocol() helper. CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> CC: Greg Rose <gregory.v.rose@intel.com> CC: Alex Duyck <alexander.h.duyck@intel.com> CC: John Ronciak <john.ronciak@intel.com> CC: Mitch Williams <mitch.a.williams@intel.com> CC: Linux NICS <linux.nics@intel.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26i40e: Fix TSO and hw checksums for non-accelerated vlan packets.Vlad Yasevich1-1/+1
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO and hw checksums. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO and checksum information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. Fix this by using vlan_get_protocol() helper. CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> CC: Greg Rose <gregory.v.rose@intel.com> CC: Alex Duyck <alexander.h.duyck@intel.com> CC: John Ronciak <john.ronciak@intel.com> CC: Mitch Williams <mitch.a.williams@intel.com> CC: Linux NICS <linux.nics@intel.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26ehea: Fix TSO and hw checksums with non-accelerated vlan packets.Vlad Yasevich1-1/+1
The driver claims that it can do TSO and IP checksums on vlan devices and also allows user to control vlan acceleration offloading. This makes it possible to push traffic to this driver that has TSO or partial checksums set, but also have a non-accelearted vlan header. In this case, the driver will fail to correctly identify such traffic and will not correctly perform segmentation and checksum calculation. Fix this by using vlan_get_protocol() helper instead of assuming skb->protocol always has this information. CC: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 15:03:12 +0300