summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-08-25lan78xx: Fix race condition in disconnect handlingJohn Efstathiades1-9/+57
If there is a device disconnect at roughly the same time as a deferred PHY link reset there is a race condition that can result in a kernel lock up due to a null pointer dereference in the driver's deferred work handling routine lan78xx_delayedwork(). The following changes fix this problem. Add new status flag EVENT_DEV_DISCONNECT to indicate when the device has been removed and use it to prevent operations, such as register access, that will fail once the device is removed. Stop processing of deferred work items when the driver's USB disconnect handler is invoked. Disconnect the PHY only after the network device has been unregistered and all delayed work has been cancelled. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix race conditions in suspend/resume handlingJohn Efstathiades1-135/+284
If the interface is given an IP address while the device is suspended (as a result of an auto-suspend event) there is a race between lan78xx_resume() and lan78xx_open() that can result in an exception or failure to handle incoming packets. The following changes fix this problem. Introduce a mutex to serialise operations in the network interface open and stop entry points with respect to the USB driver suspend and resume entry points. Move Tx and Rx data path start/stop to lan78xx_start() and lan78xx_stop() respectively and flush the packet FIFOs before starting the Tx and Rx data paths. This prevents the MAC and FIFOs getting out of step and delivery of malformed packets to the network stack. Stop processing of received packets before disconnecting the PHY from the MAC to prevent a kernel exception caused by handling packets after the PHY device has been removed. Refactor device auto-suspend code to make it consistent with the the system suspend code and make the suspend handler easier to read. Add new code to stop wake-on-lan packets or PHY events resuming the host or device from suspend if the device has not been opened (typically after an IP address is assigned). This patch is dependent on changes to lan78xx_suspend() and lan78xx_resume() introduced in the previous patch of this patch set. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix partial packet errors on suspend/resumeJohn Efstathiades1-106/+197
The MAC can get out of step with the internal packet FIFOs if the system goes to sleep when the link is active, especially at high data rates. This can result in partial frames in the packet FIFOs that in result in malformed frames being delivered to the host. This occurs because the driver does not enable/disable the internal packet FIFOs in step with the corresponding MAC data path. The following changes fix this problem. Update code that enables/disables the MAC receiver and transmitter to the more general Rx and Tx data path, where the data path in each direction consists of both the MAC function (Tx or Rx) and the corresponding packet FIFO. In the receive path the packet FIFO must be enabled before the MAC receiver but disabled after the MAC receiver. In the transmit path the opposite is true: the packet FIFO must be enabled after the MAC transmitter but disabled before the MAC transmitter. The packet FIFOs can be flushed safely once the corresponding data path is stopped. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix exception on link speed changeJohn Efstathiades1-6/+48
An exception is sometimes seen when the link speed is changed from auto-negotiation to a fixed speed, or vice versa. The exception occurs when the MAC is reset (due to the link speed change) at the same time as the PHY state machine is accessing a PHY register. The following changes fix this problem. Rework the MAC reset to ensure there is no outstanding MDIO register transaction before the reset and then wait until the reset is complete before allowing any further MAC register access. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Add missing return code checksJohn Efstathiades1-66/+333
There are many places in the driver where the return code from a function call is captured but without a subsequent test of the return code and appropriate action taken. This patch adds the missing return code tests and action. In most cases the action is an early exit from the calling function. The function lan78xx_set_suspend() was also updated to make it consistent with lan78xx_suspend(). Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused pause frame queueJohn Efstathiades1-9/+0
Remove the pause frame queue from the driver. It is initialised but not actually used. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Set flow control threshold to prevent packet lossJohn Efstathiades1-2/+15
Set threshold at which flow control is triggered to 3/4 full of the internal Rx packet FIFO to prevent packet drops at high data rates. The new setting reduces the number of dropped UDP frames and TCP retransmit requests especially on less capable CPUs. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused timerJohn Efstathiades1-3/+1
Remove kernel timer that is not used by the driver. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix white space and style issuesJohn Efstathiades1-38/+42
Fix white space and code style issues identified by checkpatch. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25xen/netfront: don't trust the backend response data blindlyJuergen Gross1-5/+84
Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page. Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25xen/netfront: disentangle tx_skb_freelistJuergen Gross1-36/+25
The tx_skb_freelist elements are in a single linked list with the request id used as link reference. The per element link field is in a union with the skb pointer of an in use request. Move the link reference out of the union in order to enable a later reuse of it for requests which need a populated skb pointer. Rename add_id_to_freelist() and get_id_from_freelist() to add_id_to_list() and get_id_from_list() in order to prepare using those for other lists as well. Define ~0 as value to indicate the end of a list and place that value into the link for a request not being on the list. When freeing a skb zero the skb pointer in the request. Use a NULL value of the skb pointer instead of skb_entry_is_link() for deciding whether a request has a skb linked to it. Remove skb_entry_set_link() and open code it instead as it is really trivial now. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25xen/netfront: don't read data from request on the ring pageJuergen Gross1-44/+42
In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25xen/netfront: read response from backend only onceJuergen Gross1-19/+19
In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: macb: Add a NULL check on desc_ptpHarini Katakam1-1/+10
macb_ptp_desc will not return NULL under most circumstances with correct Kconfig and IP design config register. But for the sake of the extreme corner case, check for NULL when using the helper. In case of rx_tstamp, no action is necessary except to return (similar to timestamp disabled) and warn. In case of TX, return -EINVAL to let the skb be free. Perform this check before marking skb in progress. Fixes coverity warning: (4) Event dereference: Dereferencing a null pointer "desc_ptp" Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25qed: Enable automatic recovery on error condition.Alok Prasad4-2/+39
This patch enables automatic recovery by default in case of various error condition like fw assert , hardware error etc. This also ensure driver can handle multiple iteration of assertion conditions. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warningsMichael Riesch1-9/+0
This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382 "net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes unbalanced pm_runtime_enable warnings. In the commit to be reverted, support for power management was introduced to the Rockchip glue code. Later, power management support was introduced to the stmmac core code, resulting in multiple invocations of pm_runtime_{enable,disable,get_sync,put_sync}. The multiple invocations happen in rk_gmac_powerup and stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and stmmac_{dvr_remove, suspend}, respectively, which are always called in conjunction. Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): remove useless BUG_ON()Tang Bin1-1/+0
In the function mpc5xxx_can_probe(), the variable 'data' has already been determined in the above code, so the BUG_ON() in this place is useless, remove it. Link: https://lore.kernel.org/r/20210823141033.17876-1-tangbin@cmss.chinamobile.com Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): use of_device_get_match_data ↵Tang Bin1-4/+2
to simplify code Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Link: https://lore.kernel.org/r/20210823113338.3568-4-tangbin@cmss.chinamobile.com Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: rcar_canfd: rcar_canfd_handle_channel_tx(): fix redundant assignmentLad Prabhakar1-1/+1
Fix redundant assignment of 'priv' to itself in rcar_canfd_handle_channel_tx(). Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Link: https://lore.kernel.org/r/20210820161449.18169-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25can: rcar: Kconfig: Add helper dependency on COMPILE_TESTCai Huoqing1-2/+2
it's helpful for complie test in other platform(e.g.X86) Link: https://lore.kernel.org/r/20210825062341.2332-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-25net: phy: mediatek: add the missing suspend/resume callbacksDENG Qingfang1-0/+4
Without suspend/resume callbacks, the PHY cannot be powered down/up administratively. Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210823044422.164184-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24igc: Add support for PTP getcrosststamp()Vinicius Costa Gomes4-0/+234
i225 supports PCIe Precision Time Measurement (PTM), allowing us to support the PTP_SYS_OFFSET_PRECISE ioctl() in the driver via the getcrosststamp() function. The easiest way to expose the PTM registers would be to configure the PTM dialogs to run periodically, but the PTP_SYS_OFFSET_PRECISE ioctl() semantics are more aligned to using a kind of "one-shot" way of retrieving the PTM timestamps. But this causes a bit more code to be written: the trigger registers for the PTM dialogs are not cleared automatically. i225 can be configured to send "fake" packets with the PTM information, adding support for handling these types of packets is left for the future. PTM improves the accuracy of time synchronization, for example, using phc2sys, while a simple application is sending packets as fast as possible. First, without .getcrosststamp(): phc2sys[191.382]: enp4s0 sys offset -959 s2 freq -454 delay 4492 phc2sys[191.482]: enp4s0 sys offset 798 s2 freq +1015 delay 4069 phc2sys[191.583]: enp4s0 sys offset 962 s2 freq +1418 delay 3849 phc2sys[191.683]: enp4s0 sys offset 924 s2 freq +1669 delay 3753 phc2sys[191.783]: enp4s0 sys offset 664 s2 freq +1686 delay 3349 phc2sys[191.883]: enp4s0 sys offset 218 s2 freq +1439 delay 2585 phc2sys[191.983]: enp4s0 sys offset 761 s2 freq +2048 delay 3750 phc2sys[192.083]: enp4s0 sys offset 756 s2 freq +2271 delay 4061 phc2sys[192.183]: enp4s0 sys offset 809 s2 freq +2551 delay 4384 phc2sys[192.283]: enp4s0 sys offset -108 s2 freq +1877 delay 2480 phc2sys[192.383]: enp4s0 sys offset -1145 s2 freq +807 delay 4438 phc2sys[192.484]: enp4s0 sys offset 571 s2 freq +2180 delay 3849 phc2sys[192.584]: enp4s0 sys offset 241 s2 freq +2021 delay 3389 phc2sys[192.684]: enp4s0 sys offset 405 s2 freq +2257 delay 3829 phc2sys[192.784]: enp4s0 sys offset 17 s2 freq +1991 delay 3273 phc2sys[192.884]: enp4s0 sys offset 152 s2 freq +2131 delay 3948 phc2sys[192.984]: enp4s0 sys offset -187 s2 freq +1837 delay 3162 phc2sys[193.084]: enp4s0 sys offset -1595 s2 freq +373 delay 4557 phc2sys[193.184]: enp4s0 sys offset 107 s2 freq +1597 delay 3740 phc2sys[193.284]: enp4s0 sys offset 199 s2 freq +1721 delay 4010 phc2sys[193.385]: enp4s0 sys offset -169 s2 freq +1413 delay 3701 phc2sys[193.485]: enp4s0 sys offset -47 s2 freq +1484 delay 3581 phc2sys[193.585]: enp4s0 sys offset -65 s2 freq +1452 delay 3778 phc2sys[193.685]: enp4s0 sys offset 95 s2 freq +1592 delay 3888 phc2sys[193.785]: enp4s0 sys offset 206 s2 freq +1732 delay 4445 phc2sys[193.885]: enp4s0 sys offset -652 s2 freq +936 delay 2521 phc2sys[193.985]: enp4s0 sys offset -203 s2 freq +1189 delay 3391 phc2sys[194.085]: enp4s0 sys offset -376 s2 freq +955 delay 2951 phc2sys[194.185]: enp4s0 sys offset -134 s2 freq +1084 delay 3330 phc2sys[194.285]: enp4s0 sys offset -22 s2 freq +1156 delay 3479 phc2sys[194.386]: enp4s0 sys offset 32 s2 freq +1204 delay 3602 phc2sys[194.486]: enp4s0 sys offset 122 s2 freq +1303 delay 3731 Statistics for this run (total of 2179 lines), in nanoseconds: average: -1.12 stdev: 634.80 max: 1551 min: -2215 With .getcrosststamp() via PCIe PTM: phc2sys[367.859]: enp4s0 sys offset 6 s2 freq +1727 delay 0 phc2sys[367.959]: enp4s0 sys offset -2 s2 freq +1721 delay 0 phc2sys[368.059]: enp4s0 sys offset 5 s2 freq +1727 delay 0 phc2sys[368.160]: enp4s0 sys offset -1 s2 freq +1723 delay 0 phc2sys[368.260]: enp4s0 sys offset -4 s2 freq +1719 delay 0 phc2sys[368.360]: enp4s0 sys offset -5 s2 freq +1717 delay 0 phc2sys[368.460]: enp4s0 sys offset 1 s2 freq +1722 delay 0 phc2sys[368.560]: enp4s0 sys offset -3 s2 freq +1718 delay 0 phc2sys[368.660]: enp4s0 sys offset 5 s2 freq +1725 delay 0 phc2sys[368.760]: enp4s0 sys offset -1 s2 freq +1721 delay 0 phc2sys[368.860]: enp4s0 sys offset 0 s2 freq +1721 delay 0 phc2sys[368.960]: enp4s0 sys offset 0 s2 freq +1721 delay 0 phc2sys[369.061]: enp4s0 sys offset 4 s2 freq +1725 delay 0 phc2sys[369.161]: enp4s0 sys offset 1 s2 freq +1724 delay 0 phc2sys[369.261]: enp4s0 sys offset 4 s2 freq +1727 delay 0 phc2sys[369.361]: enp4s0 sys offset 8 s2 freq +1732 delay 0 phc2sys[369.461]: enp4s0 sys offset 7 s2 freq +1733 delay 0 phc2sys[369.561]: enp4s0 sys offset 4 s2 freq +1733 delay 0 phc2sys[369.661]: enp4s0 sys offset 1 s2 freq +1731 delay 0 phc2sys[369.761]: enp4s0 sys offset 1 s2 freq +1731 delay 0 phc2sys[369.861]: enp4s0 sys offset -5 s2 freq +1725 delay 0 phc2sys[369.961]: enp4s0 sys offset -4 s2 freq +1725 delay 0 phc2sys[370.062]: enp4s0 sys offset 2 s2 freq +1730 delay 0 phc2sys[370.162]: enp4s0 sys offset -7 s2 freq +1721 delay 0 phc2sys[370.262]: enp4s0 sys offset -3 s2 freq +1723 delay 0 phc2sys[370.362]: enp4s0 sys offset 1 s2 freq +1726 delay 0 phc2sys[370.462]: enp4s0 sys offset -3 s2 freq +1723 delay 0 phc2sys[370.562]: enp4s0 sys offset -1 s2 freq +1724 delay 0 phc2sys[370.662]: enp4s0 sys offset -4 s2 freq +1720 delay 0 phc2sys[370.762]: enp4s0 sys offset -7 s2 freq +1716 delay 0 phc2sys[370.862]: enp4s0 sys offset -2 s2 freq +1719 delay 0 Statistics for this run (total of 2179 lines), in nanoseconds: average: 0.14 stdev: 5.03 max: 48 min: -27 For reference, the statistics for runs without PCIe congestion show that the improvements from enabling PTM are less dramatic. For two runs of 16466 entries: without PTM: avg -0.04 stdev 10.57 max 39 min -42 with PTM: avg 0.01 stdev 4.20 max 19 min -16 One possible explanation is that when PTM is not enabled, and there's a lot of traffic in the PCIe fabric, some register reads will take more time than the others because of congestion on the PCIe fabric. When PTM is enabled, even if the PTM dialogs take more time to complete under heavy traffic, the time measurements do not depend on the time to read the registers. This was implemented following the i225 EAS version 0.993. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24igc: Enable PCIe PTMVinicius Costa Gomes1-0/+6
Enables PCIe PTM (Precision Time Measurement) support in the igc driver. Notifies the PCI devices that PCIe PTM should be enabled. PCIe PTM is similar protocol to PTP (Precision Time Protocol) running in the PCIe fabric, it allows devices to report time measurements from their internal clocks and the correlation with the PCIe root clock. The i225 NIC exposes some registers that expose those time measurements, those registers will be used, in later patches, to implement the PTP_SYS_OFFSET_PRECISE ioctl(). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit1-40/+27
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Link: https://lore.kernel.org/r/db576a3e-e877-b37b-98ed-cfc03d225ab3@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24cxgb4: Remove unused vpd_param member ecHeiner Kallweit2-6/+1
Member ec isn't used, so remove it. Link: https://lore.kernel.org/r/30648e95-bfb9-9af3-0c8f-dd3e34df8b6b@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24cxgb4: Validate VPD checksum with pci_vpd_check_csum()Heiner Kallweit1-8/+4
Validate the VPD checksum with pci_vpd_check_csum() to simplify the code. Link: https://lore.kernel.org/r/70404ece-0036-c0ce-f824-f5637e54115e@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnxt: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit1-29/+9
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Link: https://lore.kernel.org/r/f062921c-ad33-3b3e-8ada-b53427a9cd4a@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnxt: Read VPD with pci_vpd_alloc()Heiner Kallweit1-9/+4
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This simplifies the code, and we no longer have to make assumptions about VPD size. Link: https://lore.kernel.org/r/62522a24-f39a-2b35-1577-1fbb41695bed@gmail.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnx2x: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit1-42/+15
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Use strncasecmp() to match Vendor ID instead of comparing with lower- and upper-case hex string. [bhelgaas: convert to strncasecmp()] Link: https://lore.kernel.org/r/a9f730cf-e31e-902b-7b39-0ff2e99636e0@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnx2x: Read VPD with pci_vpd_alloc()Heiner Kallweit2-35/+10
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This simplifies the code, and we no longer have to make assumptions about VPD size. Link: https://lore.kernel.org/r/821a334d-ff9d-386e-5f42-9b620ab3dbfa@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnx2: Replace open-coded byte swapping with swab32s()Heiner Kallweit1-9/+4
Read NVRAM directly into buffer and use swab32s() to byte swap it in-place instead of reading it into the end of the buffer and swapping it manually while copying it. [bhelgaas: commit log] Link: https://lore.kernel.org/r/e4ac6229-1df5-8760-3a87-1ad0ace87137@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24bnx2: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit1-25/+8
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Link: https://lore.kernel.org/r/7ca2b8b5-4c94-f644-1d80-b2ffb8df2d05@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit1-51/+14
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Replace netif_err() with pci_err() because the netdevice isn't registered yet, which results in very ugly messages. Use kmemdup_nul() instead of open-coding it. This is the same as 37838aa437c7 ("sfc: Search VPD with pci_vpd_find_ro_info_keyword()"), just for the falcon chip version. Link: https://lore.kernel.org/r/898282a1-13bd-17bc-2e9a-d3dcd336b46c@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24sfc: falcon: Read VPD with pci_vpd_alloc()Heiner Kallweit1-16/+14
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This avoids having to allocate a buffer on the stack, and we don't have to make any assumptions on VPD size and location of information in VPD. This is the same as 5119e20facfa ("sfc: Read VPD with pci_vpd_alloc()"), just for the falcon chip version. Link: https://lore.kernel.org/r/2a8d069e-9516-50d8-6520-2614222c8f5f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24net: hns3: add ethtool support for CQE/EQE mode configurationYufeng Mo3-4/+23
Add support in ethtool for switching EQE/CQE mode. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24net: hns3: add support for EQE/CQE mode configurationYufeng Mo5-2/+58
For device whose version is above V3(include V3), the GL can select EQE or CQE mode, so adds support for it. In CQE mode, the coalesced timer will restart when the first new completion occurs, while in EQE mode, the timer will not restart. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo79-189/+531
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24Merge 5.14-rc7 into char-misc-nextGreg Kroah-Hartman78-335/+809
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-24r8169: enable ASPM L0s stateHeiner Kallweit1-3/+2
ASPM is disabled completely because we've seen different types of problems in the past. However it seems these problems occurred with L1 or L1 sub-states only. On all the chip versions I've seen the acceptable L0s exit latency is 512ns. This should be short enough not to cause problems. If the actual L0s exit latency of the PCIe link is bigger than 512ns then the PCI core will disable L0s anyway. So let's give it a try and disable L1 and L1 sub-states only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: mv88e6xxx: Update mv88e6393x serdes errataNathan Rossi1-5/+6
In early erratas this issue only covered port 0 when changing from [x]MII (rev A 3.6). In subsequent errata versions this errata changed to cover the additional "Hardware reset in CPU managed mode" condition, and removed the note specifying that it only applied to port 0. In designs where the device is configured with CPU managed mode (CPU_MGD), on reset all SERDES ports (p0, p9, p10) have a stuck power down bit and require this initial power up procedure. As such apply this errata to all three SERDES ports of the mv88e6393x. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: let drivers state that they need VLAN filtering while standaloneVladimir Oltean1-0/+1
As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24qed: Fix the VF msix vectors flowShai Malin1-1/+6
For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested. Not doing that will lead to a crash when starting queues for this VF. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24cxgb4: improve printing NIC informationHeiner Kallweit1-2/+1
Currently the interface name and PCI address are printed twice, because netdev_info() is printing this information implicitly already. This results in messages like the following. remove the duplicated information. cxgb4 0000:81:00.4 eth3: eth3: Chelsio T6225-OCP-SO (0000:81:00.4) 1G/10G/25GBASE-SFP28 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23via-velocity: Use of_device_get_match_data to simplify codeTang Bin1-4/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23via-rhine: Use of_device_get_match_data to simplify codeTang Bin1-7/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: usb: asix: do not call phy_disconnect() for ax88178Oleksij Rempel1-1/+7
Fix crash on reboot on a system with ASIX AX88178 USB adapter attached to it: | asix 1-1.4:1.0 eth0: unregister 'asix' usb-ci_hdrc.0-1.4, ASIX AX88178 USB 2.0 Ethernet | 8<--- cut here --- | Unable to handle kernel NULL pointer dereference at virtual address 0000028c | pgd = 5ec93aee | [0000028c] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.14.0-rc1-20210811-1 #4 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | PC is at phy_disconnect+0x8/0x48 | LR is at ax88772_unbind+0x14/0x20 | [<80650d04>] (phy_disconnect) from [<80741aa4>] (ax88772_unbind+0x14/0x20) | [<80741aa4>] (ax88772_unbind) from [<8074e250>] (usbnet_disconnect+0x48/0xd8) | [<8074e250>] (usbnet_disconnect) from [<807655e0>] (usb_unbind_interface+0x78/0x25c) | [<807655e0>] (usb_unbind_interface) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) | [<805ab26c>] (device_del) from [<807634a4>] (usb_disable_device+0xcc/0x178) | [<807634a4>] (usb_disable_device) from [<8075a060>] (usb_disconnect+0xd8/0x238) | [<8075a060>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<80af3520>] (usb_remove_hcd+0xa0/0x198) | [<80af3520>] (usb_remove_hcd) from [<807902e0>] (host_stop+0x38/0xa8) | [<807902e0>] (host_stop) from [<8078d9e4>] (ci_hdrc_remove+0x3c/0x118) | [<8078d9e4>] (ci_hdrc_remove) from [<805b27ec>] (platform_remove+0x20/0x50) | [<805b27ec>] (platform_remove) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) For this adapter we call ax88178_bind() and ax88772_unbind(), which is related to different chip version and different counter part *bind() function. Since this chip is currently not ported to the PHYLIB, we do not need to call phy_disconnect() here. So, to fix this crash, we need to add ax88178_unbind(). Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Robin van der Gracht <robin@protonic.nl> Tested-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: usb: asix: ax88772: move embedded PHY detection as early as possibleOleksij Rempel2-21/+21
Some HW revisions need additional MAC configuration before the embedded PHY can be enabled. If this is not done, we won't be able to get response from the internal PHY. This issue was detected on chipcode == AX_AX88772_CHIPCODE variant, where ax88772_hw_reset() was executed with missing embd_phy flag. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23hinic: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-15/+2
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23qlcnic: switch from 'pci_' to 'dma_' APIChristophe JAILLET3-29/+25
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net/mellanox: switch from 'pci_' to 'dma_' APIChristophe JAILLET4-34/+13
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 06:31:24 +0300