| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Sampled packets are sent to software using termination tables. There
is only one rule in that table that is to forward sampled packets to
the e-switch management vport.
Create a sampler termination table and rule for each eswitch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Parse TC sample action and save sample parameters in flow attribute
data structure.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, the u32 chain id is mapped to u16 value which is stored on
the lower 16 bits of reg_c0 for FDB and reg_b for NIC tables. The
mapping is internally maintained by the chains object. However, with
the introduction of reg_c0 objects the fdb may store more than just
the chain id on reg_c0. This is not relevant for NIC tables.
Separate the chains mapping instantiation for FDB and NIC tables.
Remove the mapping from the chains object. For FDB tables, create
the mapping per eswitch. For NIC tables, create the mapping per tc
table. Pass the corresponding mapping pointer when creating the
chains object.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently reg_c0 lower 16 bits and reg_b are used to store the chain
id that missed in FDB and NIC tables accordingly. However, the
registers' values may index a restore object, rather than a single u32
value. Different object types can be used to restore mutually exclusive
contexts such as chain id and sample group id.
Use the mapping object to associate an index with a restore object
as a prestep for supporting additional restore types.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Different per voprt table is created using a different per vport table
namespace. Because we can't use variable to set the namespace member
value. If max group number is 0 in the namespace, use the eswitch
default max group number.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, per vport table was used only for port mirroring actions.
However, sample action will also require a per vport table instance.
Generalize the vport table API to work with multiple namespaces where
each namespace manages its own vport table instance.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Public api starts with mlx5 and remove mlx5 for non-public api.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, the vport table functions are in common eswitch offload
file. This file is too big. Move the vport table create, delete and
lookup functions to a separate file. Put the file in esw directory.
Pre-step for generalizing its functionality for serving both the
mirroring and the sample features.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Memory allocated by kvzalloc() should be freed by kvfree().
Fixes: 34ca65352ddf2 ("net/mlx5: E-Switch, Indirect table infrastructur")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make sure to modify uplink port to follow only if the uplink_follow
capability is set as required by the HW spec. Failure to do so causes
traffic to the uplink representor net device to cease after switching to
switchdev mode.
Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
to match the appropriate type, using new tun_get_addr_len utility function
which returns appropriate address length for given type. Fixes a
KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow hardware offload of a policer action attached to a matchall filter
which enforces a packets-per-second rate-limit.
e.g.
tc filter add dev tap1 parent ffff: u32 match \
u32 0 0 police pkts_rate 3000 pkts_burst 1000
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the VF down state bit is cleared after VF sending
link status request command. There is problem that when VF gets
link status replied from PF, the down state bit may still set
as 1. In this case, the link status replied from PF will be
ignored and always set VF link status to down.
To fix this problem, clear VF down state bit before VF requests
link status.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-04-06
this is a pull request of 1 patch for net/master.
The patch is by me and fixes the SPI half duplex support in the
mcp251x CAN driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have currently three users of the PSEC_PER_SEC each of them defining it
individually. Instead, move it to time64.h to be available for everyone.
There is a new user coming with the same constant in use. It will also
make its life easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PCI device IDs are defined with a prefix PCI_DEVICE_ID.
There is no need to repeat the ID part at the end of each definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pci_resource_start() is not a good indicator to determine if a PCI
resource exists or not, since the resource may start at address 0.
This is seen when trying to instantiate the driver in qemu for riscv32
or riscv64.
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f]
pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f]
...
pcnet32: card has no PCI IO resources, aborting
Use pci_resouce_len() instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the following coccicheck warning:
drivers/net/netdevsim/fib.c:569:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the following coccicheck warning:
drivers/net/ethernet/mediatek/mtk_ppe.c:270:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ether devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.
Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ether driver were added in a previous patch.
Instead of cdc_ether spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
User space can now get the most recent link speed/state using ethtool.
v4: added to series since cdc_ether uses same notifications
as cdc_ncm driver.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ncm devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.
Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ncm driver were added in a previous patch.
So instead of cdc_ncm spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
Link speed/state is now available via ethtool.
This is especially useful given all current RTL8156 devices emit
a connection/speed status notification every 32ms and this would
fill the dmesg buffer. This implementation replaces the one
recently submitted in de658a195ee23ca6aaffe197d1d2ea040beea0a2 :
"net: usb: cdc_ncm: don't spew notifications"
v2: rebased on upstream
v3: changed variable names
v4: rewrote commit message
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The old method for reporting link speed assumed a driver uses the
generic phy (mii) MDIO read/write functions. CDC devices don't
expose the phy.
Add a primitive internal version reporting back directly what
the CDC notification/status operations recorded.
v2: rebased on upstream
v3: changed names and made clear which units are used
v4: moved hunks to correct patch; rewrote commmit messages
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The generic functions assumed devices provided an MDIO interface (accessed
via older mii code, not phylib). This is true only for genuine ethernet.
Devices with a higher level of abstraction or based on different
technologies do not have MDIO. To support this case, first rename
the existing functions with _mii suffix.
v2: rebased on changed upstream
v3: changed names to clearly say that this does NOT use phylib
v4: moved hunks to correct patch; reworded commmit messages
Signed-off-by : Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") brought a ~10% performance drop.
The reason for the performance drop was that GRO was forced
to chain sk_buff (using skb_shinfo(skb)->frag_list), which
uses more memory but also cause packet consumers to go over
a lot of overhead handling all the tiny skbs.
It turns out that virtio_net page_to_skb() has a wrong strategy :
It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then
copies 128 bytes from the page, before feeding the packet to GRO stack.
This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") because GRO was using 2 frags per MSS,
meaning we were not packing MSS with 100% efficiency.
Fix is to pull only the ethernet header in page_to_skb()
Then, we change virtio_net_hdr_to_skb() to pull the missing
headers, instead of assuming they were already pulled by callers.
This fixes the performance regression, but could also allow virtio_net
to accept packets with more than 128bytes of headers.
Many thanks to Xuan Zhuo for his report, and his tests/help.
Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://www.spinics.net/lists/netdev/msg731397.html
Co-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bcm4908_enet_dma_alloc, if callee bcm4908_dma_alloc_buf_descs() failed,
it will free the ring->cpu_addr by dma_free_coherent() and return error.
Then bcm4908_enet_dma_free() will be called, and free the same cpu_addr
by dma_free_coherent() again.
My patch set ring->cpu_addr to NULL after it is freed in
bcm4908_dma_alloc_buf_descs() to avoid the double free.
Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some SPI host controllers do not support full-duplex SPI transfers.
The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.
To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().
Fixes: e0e25001d088 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Unfortunately, since beacon protection isn't fully available
yet, we didn't notice that there are problems with it and
that the replay detection isn't working correctly. We were
relying only on mac80211, since iwl_mvm_rx_crypto() exits
when !ieee80211_has_protected(), which is of course true for
protected (but not encrypted) management frames.
Fix this to properly detect protected (but not encrypted)
management frames and handle them - we continue to only care
about beacons since for others everything can and will be
checked in mac80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: b1fdc2505abc ("iwlwifi: mvm: advertise BIGTK client support if available")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.23c990843369.I09c262a8f6f9852cc8f513cdcb31a7f8f87dd8af@changeid
|
|
The mutex is already locked in iwl_mvm_mac_start.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Fixes: 21254908cbe9 ("iwlwifi: mvm: add RFI-M support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.703288ea058d.I82a0312389032d07c3b478bef3e938e06bfa7df6@changeid
|
|
We have a new type of device that has a different MAC ID, but is
otherwise identical to So devices. Add rules to match this new ID
accordingly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid
|
|
Since we now call iwl_notification_wait_notify() from the
NAPI poll in soft-IRQ, we get a (valid) lockdep complaint
that we could get a deadlock by taking the spinlock from
sleeping context and then getting the soft-IRQ that also
tries to take it (in NAPI polling).
Fix this by disabling soft-IRQs for this lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid
|
|
Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid
|
|
As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).
Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.
Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
|
|
When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1. This was
never changed in the driver, so we were checking for the wrong bit in
newer devices. Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
|
|
The driver can match via multiple methods. Its acpi_device_id table is
referenced via ACPI_PTR() so it will be unused for !CONFIG_ACPI builds:
drivers/net/ethernet/smsc/smsc911x.c:2652:36: warning:
‘smsc911x_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Limiting the scope of the variable vector_ring_chain to the block where it
is used.
Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Code to defer the reset(which caps the frequency of the reset) schedules the
timer and returns. Hence, following 'else-if' looks un-necessary.
Fixes: 9de0b86f6444 ("net: hns3: Prevent to request reset frequently")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This removes the left over check and assignment which is no longer used
anywhere in the function and should have been removed as part of the
below mentioned patch.
Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we can specify ifindex on link creation. This change allows
to specify ifindex when a device is moved to another network namespace.
Even now, a device ifindex can be changed if there is another device
with the same ifindex in the target namespace. So this change doesn't
introduce completely new behavior, it adds more control to the process.
CRIU users want to restore containers with pre-created network devices.
A user will provide network devices and instructions where they have to
be restored, then CRIU will restore network namespaces and move devices
into them. The problem is that devices have to be restored with the same
indexes that they have before C/R.
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ++ is confusing. It looks duplicated with the one already performed in
'skb_fill_page_desc()'.
In fact, it is harmless. 'nr_frags' is written twice with the same value.
Once, because of the nr_frags++, and once because of the 'nr_frags = i + 1'
in 'skb_fill_page_desc()'.
So axe this post-increment to avoid confusion.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'page_address(skb_frag_page()) + skb_frag_off()' can be replaced by an
equivalent 'skb_frag_address()' which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to use 'list_for_each_entry_safe' here, as nothing is
removed from the list in the 'for' loop.
Use 'list_for_each_entry' instead, it is slightly less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
X.25 Layer 3 (the Packet Layer) expects layer 2 to provide a reliable
datalink service such that no packets are reordered or dropped. And
X.25 Layer 2 (the LAPB layer) is indeed designed to provide such service.
However, this reliability is not preserved when a driver calls "netif_rx"
to deliver the received packets to layer 3, because "netif_rx" will put
the packets into per-CPU queues before they are delivered to layer 3.
If there are multiple CPUs, the order of the packets may not be preserved.
The per-CPU queues may also drop packets if there are too many.
Therefore, we should not call "netif_rx" to let it queue the packets.
Instead, we should use our own queue that won't reorder or drop packets.
This patch changes all X.25 drivers to use their own queues instead of
calling "netif_rx". The patch also documents this requirement in the
"x25-iface" documentation.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-02
This series provides trivial updates and cleanup to mlx5 driver
1) Support for matching on ct_state inv and rel flag in connection tracking
2) Reject TC rules that redirect from a VF to itself
3) Parav provided some E-Switch cleanups that could be summarized to:
3.1) Packing and Reduce structure sizes
3.2) Dynamic allocation of rate limit tables and structures
4) Vu Makes the netdev arfs and vlan tables allocation dynamic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx5 implementation executes a firmware command on the PF to change
the configuration of the selected VF.
Link: https://lore.kernel.org/linux-pci/20210314124256.70253-5-leon@kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The number of MSI-X vectors is a PCI property visible through lspci. The
field is read-only and configured by the device. The mlx5 devices work in
a static or dynamic assignment mode.
Static assignment means that all newly created VFs have a preset number of
MSI-X vectors determined by device configuration parameters. This can
result in some VFs having too many or too few MSI-X vectors. Till now this
has been the only means of fine-tuning the MSI-X vector count and it was
acceptable for small numbers of VFs.
With dynamic assignment the inefficiency of having a fixed number of MSI-X
vectors can be avoided with each VF having exactly the required
vectors. Userspace will provide this information while provisioning the VF
for use, based on the intended use. For instance if being used with a VM,
the MSI-X vector count might be matched to the CPU count of the VM.
For compatibility mlx5 continues to start up with MSI-X vector assignment,
but the kernel can now access a larger dynamic vector pool and assign more
vectors to created VFs.
Link: https://lore.kernel.org/linux-pci/20210314124256.70253-4-leon@kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This patch adds the support of XDP_REDIRECT to another remote cpu for
further action. It also implements ndo_xdp_xmit ops, enabling the driver
to transmit packets forwarded to it by XDP program running on another
interface.
This patch has been tested using "xdp_redirect_cpu" for XDP_REDIRECT
+ drop testing. It also been tested with "xdp_redirect" sample app
which can be used to exercise ndo_xdp_xmit ops. The burst traffics are
generated using pktgen_sample03_burst_single_flow.sh in samples/pktgen
directory.
v4: Move xdp_do_flush() processing into stmmac_finalize_xdp_rx() and
combined the XDP verdict of XDP TX and REDIRECT together.
v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
for point out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for XDP_TX action which enables XDP program to
transmit back received frames.
This patch has been tested with the "xdp2" app located in samples/bpf
dir. The DUT receives burst traffic packet generated using pktgen script
'pktgen_sample03_burst_single_flow.sh'.
v4: Moved stmmac_tx_timer_arm() to be done once at the end of NAPI RX.
Fixed stmmac_xdp_xmit_back() to return STMMAC_XDP_CONSUMED if
XDP buffer to frame conversion fails. Thanks to Jakub's input.
v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
for pointing out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
