summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08i40e: Fix sparse error: 'vsi->netdev' could be nullArkadiusz Kubalewski1-2/+1
Remove vsi->netdev->name from the trace. This is redundant information. With the devinfo trace, the adapter is already identifiable. Previously following error was produced when compiling against sparse. i40e_main.c:2571 i40e_sync_vsi_filters() error: we previously assumed 'vsi->netdev' could be null (see line 2323) Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: uninitialized symbol 'ring'Arkadiusz Kubalewski1-0/+3
Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse errors in i40e_txrx.cArkadiusz Kubalewski1-7/+5
Remove error handling through pointers. Instead use plain int to return value from i40e_run_xdp(...). Previously: - sparse errors were produced during compilation: i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR() - sk_buff* was used to return value, but it has never had valid pointer to sk_buff. Returned value was always int handled as a pointer. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix parameters in aq_get_phy_register()Grzegorz Siwik1-1/+1
Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08mac80211_hwsim: use DEFINE_SPINLOCK() for spinlockGuobin Huang1-6/+2
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1616839160-6654-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08virt_wifi: Return micros for BSS TSF valuesA. Cody Schuffelen1-2/+3
cfg80211_inform_bss expects to receive a TSF value, but is given the time since boot in nanoseconds. TSF values are expected to be at microsecond scale rather than nanosecond scale. Signed-off-by: A. Cody Schuffelen <schuffelen@google.com> Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08ice: Remove unnecessary blank lineTony Nguyen1-1/+0
Checkpatch reports the following, fix it. ----------------------------------------- drivers/net/ethernet/intel/ice/ice_main.c ----------------------------------------- CHECK:BRACES: Blank lines aren't necessary before a close brace '}' FILE: drivers/net/ethernet/intel/ice/ice_main.c:455: + +} Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-04-08ice: Remove unnecessary checks in add/kill_vid ndo opsBrett Creeley1-12/+0
Currently the driver is doing two unnecessary checks. First both ops are checking if the VLAN ID passed in is less than VLAN_N_VID and second both ops are checking to see if a port VLAN is configured on the VSI. The first check is already handled by the 8021q driver so this is an unnecessary check. The second check is unnecessary because the PF VSI is never put into a port VLAN. Remove these checks. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove rx_gro_dropped statAnirudh Venkataramanan4-6/+1
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Use local variable instead of pointer derefsAnirudh Venkataramanan1-15/+12
Replace multiple instances of vsi->back and pi->phy with equivalent local variables Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove unnecessary variableAnirudh Venkataramanan1-6/+1
In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this and just use pi->hw Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Limit forced overrides based on FW versionJeb Cramer1-12/+2
Beyond a specific version of firmware, there is no need to provide override values to the firmware when setting PHY capabilities. In this case, we do not need to indicate whether we're in Strict or Lenient Link Mode. In the case of translating capabilities to the configuration structure, the module compliance enforcement is already correctly set by firmware, so the extra code block is redundant. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Use default configuration mode for PHY configurationAnirudh Venkataramanan6-42/+103
Recent firmware supports a new "get PHY capabilities" mode ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver to track and apply NVM based default link overrides. If FW AQ API version supports it, use Report Default Configuration. Add check function for Report Default Configuration support and update accordingly. Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for clarity. Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Replace some memsets and memcpys with assignmentAnirudh Venkataramanan1-7/+3
In ice_set_link_ksettings, use assignment instead of memset/memcpy where possible Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Fix error return codes in ice_set_link_ksettingsAnirudh Venkataramanan1-7/+7
Return more appropriate error codes so that the right error message is communicated to the user by ethtool. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Rename a couple of variablesAnirudh Venkataramanan1-25/+25
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to 'pi'. This is more consistent with similar usages elsewhere in the driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove unnecessary checker loopAnirudh Venkataramanan1-9/+1
The loop checking for PF VSI doesn't make any sense. The VSI type backing the netdev passed to ice_set_link_ksettings will always be of type ICE_PF_VSI. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Ignore EMODE return for opcode 0x0605Anirudh Venkataramanan4-38/+59
When link is owned by manageability, the driver is not allowed to fiddle with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so. This patch adds a new function ice_set_link which abstracts the call to ice_aq_set_link_restart_an and provides a clean way to turn on/off link. While making this change, I also spotted that an int variable was being used to hold both an ice_status return code and the Linux errno return code. This pattern more often than not results in the driver inadvertently returning ice_status back to kernel which is a major boo-boo. Clean it up. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Align macro names to the specificationAnirudh Venkataramanan4-23/+24
For get PHY abilities AQ, the specification defines "report modes" as "with media", "without media" and "active configuration". For clarity, rename macros to align with the specification. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Modify recursive way of adding nodesVictor Raj1-53/+77
Remove the recursive way of adding the nodes to the layer in order to reduce the stack usage. Instead the algorithm is modified to use a while loop. The previous code was scanning recursively the nodes horizontally. The total stack consumption will be based on number of nodes present on that layer. In some cases it can consume more stack. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Re-send some AQ commands, as result of EBUSY AQ errorChinh T Cao3-2/+84
Retry sending some AQ commands, as result of EBUSY AQ error. ice_aqc_opc_get_link_topo ice_aqc_opc_lldp_stop ice_aqc_opc_lldp_start ice_aqc_opc_lldp_filter_ctrl This change follows the latest guidelines from HW team. It is better to retry the same AQ command several times, as the result of EBUSY, instead of returning error to the caller right away. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08net: hso: fix null-ptr-deref during tty device unregistrationAnirudh Rayabharam1-21/+12
Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. Fixes: 72dc1c096c705 ("HSO: add option hso driver") Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: fealnx: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: atheros: atl2: use module_pci_driver to simplify the codeWei Yongjun1-23/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: sundance: use module_pci_driver to simplify the codeWei Yongjun1-14/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08tulip: de2104x: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08tulip: windbond-840: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08enic: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: encx24j600: use module_spi_driver to simplify the codeWei Yongjun1-11/+1
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08Merge tag 'wireless-drivers-2021-04-07' of ↵David S. Miller13-55/+97
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 Third, and last, set of fixes for v5.12. Small fixes, iwlwifi having most of them. brcmfmac regression caused by cfg80211 changes is the most important here. iwlwifi * fix a lockdep warning * fix regulatory feature detection in certain firmware versions * new hardware support * fix lockdep warning * mvm: fix beacon protection checks mt76 * mt7921: fix airtime reporting brcmfmac * fix a deadlock regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: wan: z85230: drop unused async stateJohan Hovold1-39/+0
According to the changelog, asynchronous mode was dropped sometime before v2.2. Let's get rid of the unused driver-specific async state as well so that it doesn't show up when doing tree-wide tty work. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08liquidio: Fix unintented sign extension of a left shift of a u16Colin Ian King1-1/+1
The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port (a u16) left 24 places. There are two subtle issues here, first the shift gets promoted to an signed int and then sign extended to a u64. If oct->pcie_port is 0x80 or more then the upper bits get sign extended to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it needs to be cast to a u64 for all the bits to not overflow. It is entirely possible that the u16 port value is never large enough for this to fail, but it is useful to fix unintended overflows such as this. Fix this by casting the port parameter to the macro to a u64 before the shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ethtool: Remove link_mode param and derive link params from driverDanielle Ratson1-5/+14
Some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback, before populating it with actual values. Such drivers will set the new 'link_mode' field to zero, resulting in user space receiving wrong link mode information given that zero is a valid value for the field. Another problem is that some drivers (notably tun) can report random values in the 'link_mode' field. This can result in a general protection fault when the field is used as an index to the 'link_mode_params' array [1]. This happens because such drivers implement their set_link_ksettings() callback by simply overwriting their private copy of 'ethtool_link_ksettings' struct with the one they get from the stack, which is not always properly initialized. Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings' and instead have drivers call ethtool_params_from_link_mode() with the current link mode. The function will derive the link parameters (e.g., speed) from the link mode and fill them in the 'ethtool_link_ksettings' struct. v3: * Remove link_mode parameter and derive the link parameters in the driver instead of passing link_mode parameter to ethtool and derive it there. v2: * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct. [1] general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967] CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446 Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 +38 d0 7c 08 84 d2 0f 85 b9 RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000 RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960 RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000 R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210 FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08xircom: remove redundant error check on variable errColin Ian King1-2/+0
The error check on err is always false as err is always 0 at the port_found label. The code is redundant and can be removed. Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08Merge tag 'linux-can-next-for-5.13-20210407' of ↵David S. Miller5-21/+90
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-04-07 this is a pull request of 6 patches for net-next/master. The first patch targets the CAN driver infrastructure, it improves the alloc_can{,fd}_skb() function to set the pointer to the CAN frame to NULL if skb allocation fails. The next patch adds missing error handling to the m_can driver's RX path (the code was introduced in -next, no need to backport). In the next patch an unused constant is removed from an enum in the c_can driver. The last 3 patches target the mcp251xfd driver. They add BQL support and try to work around a sometimes broken CRC when reading the TBC register. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: remove the new_ifindex argument from dev_change_net_namespaceAndrei Vagin1-1/+1
Here is only one place where we want to specify new_ifindex. In all other cases, callers pass 0 as new_ifindex. It looks reasonable to add a low-level function with new_ifindex and to convert dev_change_net_namespace to a static inline wrapper. Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08Merge tag 'mlx5-updates-2021-04-06' of ↵David S. Miller14-278/+1097
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-04-06 Introduce TC sample offload Background ---------- The tc sample action allows user to sample traffic matched by tc classifier. The sampling consists of choosing packets randomly and sampling them using psample module. The tc sample parameters include group id, sampling rate and packet's truncation (to save kernel-user traffic). Sample in TC SW --------------- User must specify rate and group id for sample action, truncate is optional. tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower \ src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03 \ action sample rate 10 group 5 trunc 60 \ action mirred egress redirect dev enp4s0f0_1 The tc sample action kernel module 'act_sample' will call another kernel module 'psample' to send sampled packets to userspace. MLX5 sample HW offload - MLX5 driver patches -------------------------------------------- The sample action is translated to a goto flow table object destination which samples packets according to the provided sample ratio. Sampled packets are duplicated. One copy is processed by a termination table, named the sample table, which sends the packet to the eswitch manager port (that will be processed by software). The second copy is processed by the default table which executes the subsequent actions. The default table is created per <vport, chain, prio> tuple as rules with different prios and chains may overlap. For example, for the following typical flow table: +-------------------------------+ + original flow table + +-------------------------------+ + original match + +-------------------------------+ + sample action + other actions + +-------------------------------+ We translate the tc filter with sample action to the following HW model: +---------------------+ + original flow table + +---------------------+ + original match + +---------------------+ | v +------------------------------------------------+ + Flow Sampler Object + +------------------------------------------------+ + sample ratio + +------------------------------------------------+ + sample table id | default table id + +------------------------------------------------+ | | v v +-----------------------------+ +----------------------------------------+ + sample table + + default table per <vport, chain, prio> + +-----------------------------+ +----------------------------------------+ + forward to management vport + + original match + +-----------------------------+ +----------------------------------------+ + other actions + +----------------------------------------+ Flow sampler object ------------------- Hardware introduces flow sampler object to do sample. It is a new destination type. Driver needs to specify two flow table ids in it. One is sample table id. The other one is the default table id. Sample table samples the packets according to the sample rate and forward the sampled packets to eswitch manager port. Default table finishes the subsequent actions. Group id and reg_c0 ------------------- Userspace program will take different actions for sampled packets according to tc sample action group id. So hardware must pass group id to software for each sampled packets. In Paul Blakey's "Introduce connection tracking offload" patch set, reg_c0 lower 16 bits are used for miss packet chain id restore. We convert reg_c0 lower 16 bits to a common object pool, so other features can also use it. Since sample group id is 32 bits, create a 16 bits object id to map the group id and write the object id to reg_c0 lower 16 bits. reg_c0 can only be used for matching. Write reg_c0 to flow_tag, so software can get the object id via flow_tag and find group id via the common object pool. Sampler restore handle ---------------------- Use common object pool to create an object id to map sample parameters. Allocate a modify header action to write the object id to reg_c0 lower 16 bits. Create a restore rule to pass the object id to software. So software can identify sampled packets via the object id and send it to userspace. Aggregate the modify header action, restore rule and object id to a sample restore handle. Re-use identical sample restore handle for the same object id. Send sampled packets to userspace --------------------------------- The destination for sampled packets is eswitch manager port, so representors can receive sampled packets together with the group id. Driver will send sampled packets and group id to userspace via psample. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08mlxsw: core: Remove critical trip points from thermal zonesVadim Pasternak1-21/+6
Disable software thermal protection by removing critical trip points from all thermal zones. The software thermal protection is redundant given there are two layers of protection below it in firmware and hardware. The first layer is performed by firmware, the second, in case firmware was not able to perform protection, by hardware. The temperature threshold set for hardware protection is always higher than for firmware. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08stmmac: intel: Enable SERDES PHY rx clk for PSEVoon Weifeng2-0/+11
EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up sequence and vice versa. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC ↵Marc Kleine-Budde1-0/+34
register MCP251XFD_REG_TBC is the time base counter register. It increments once per SYS clock tick, which is 20 or 40 MHz. Observation shows that if the lowest byte (which is transferred first on the SPI bus) of that register is 0x00 or 0x80 the calculated CRC doesn't always match the transferred one. To reproduce this problem let the driver read the TBC register in a high frequency. This can be done by attaching only the mcp251xfd CAN controller to a valid terminated CAN bus and send a single CAN frame. As there are no other CAN controller on the bus, the sent CAN frame is not ACKed and the mcp251xfd repeats it. If user space enables the bus error reporting, each of the NACK errors is reported with a time stamp (which is read from the TBC register) to user space. $ ip link set can0 down $ ip link set can0 up type can bitrate 500000 berr-reporting on $ cansend can0 4FF#ff.01.00.00.00.00.00.00 This leads to several error messages per second: | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 3a 86 da, CRC=0x7753) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 01 b4 da, CRC=0x5830) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 e9 23 db, CRC=0xa723) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 8a 30 db, CRC=0x4a9c) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 f3 43 db, CRC=0x66d2) retrying. If the highest bit in the lowest byte is flipped the transferred CRC matches the calculated one. We assume for now the CRC calculation in the chip works on wrong data and the transferred data is correct. This patch implements the following workaround: - If a CRC read error on the TBC register is detected and the lowest byte is 0x00 or 0x80, the highest bit of the lowest byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Link: https://lore.kernel.org/r/20210406110617.1865592-5-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: mcp251xfd: mcp251xfd_regmap_crc_read_one(): Factor out crc check into ↵Marc Kleine-Budde1-10/+20
separate function This patch factors out the crc check into a separate function. This is preparation for the next patch. Link: https://lore.kernel.org/r/20210406110617.1865592-4-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: mcp251xfd: add BQL supportMarc Kleine-Budde1-5/+18
This patch re-adds BQL support to the driver. Support for netdev_xmit_more() will be added in a separate patch series. Link: https://lore.kernel.org/r/20210406110617.1865592-3-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: c_can: remove unused enum BOSCH_C_CAN_PLATFORMMarc Kleine-Budde1-1/+0
This patch removes the unused enum BOSCH_C_CAN_PLATFORM. Link: https://lore.kernel.org/r/20210406110617.1865592-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: m_can: m_can_receive_skb(): add missing error handling to ↵Marc Kleine-Budde1-3/+10
can_rx_offload_queue_sorted() call In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripherals (i.e. SPI based m_can controllers) was converted to the rx-offload infrastructure. However, the error handling for can_rx_offload_queue_sorted() was forgotten. can_rx_offload_queue_sorted() will return with an error if the internal queue is full. This patch adds the missing error handling, by increasing the rx_fifo_errors. Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Link: https://lore.kernel.org/r/20210401084515.1455013-1-mkl@pengutronix.de Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503583 ("Error handling issues") Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: skb: alloc_can{,fd}_skb(): set "cf" to NULL if skb allocation failsMarc Kleine-Budde1-2/+8
The handling of CAN bus errors typically consist of allocating a CAN error SKB using alloc_can_err_skb() followed by stats handling and filling the error details in the newly allocated CAN error SKB. Even if the allocation of the SKB fails the stats handling should not be skipped. The common pattern in CAN drivers is to allocate the skb and work on the struct can_frame pointer "cf", if it has been assigned by alloc_can_err_skb(). | skb = alloc_can_err_skb(priv->ndev, &cf); | | /* RX errors */ | if (bdiag1 & (MCP251XFD_REG_BDIAG1_DCRCERR | | MCP251XFD_REG_BDIAG1_NCRCERR)) { | netdev_dbg(priv->ndev, "CRC error\n"); | | stats->rx_errors++; | if (cf) | cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ; | } In case of an OOM alloc_can_err_skb() returns NULL, but doesn't set "cf" to NULL as well. For the above pattern to work the "cf" has to be initialized to NULL, which is easily forgotten. To solve this kind of problems, set "cf" to NULL if alloc_can_err_skb() returns NULL. Link: https://lore.kernel.org/r/20210402102245.1512583-1-mkl@pengutronix.de Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07net/mlx5e: TC, Add support to offload sample actionChris Mi5-2/+328
The following diagram illustrates the hardware model for tc sample action: +---------------------+ + original flow table + +---------------------+ + original match + +---------------------+ | v +------------------------------------------------+ + Flow Sampler Object + +------------------------------------------------+ + sample ratio + +------------------------------------------------+ + sample table id | default table id + +------------------------------------------------+ | | v v +-----------------------------+ +----------------------------------------+ + sample table + + default table per <vport, chain, prio> + +-----------------------------+ +----------------------------------------+ + forward to management vport + + original match + +-----------------------------+ +----------------------------------------+ + other actions + +----------------------------------------+ The sample action is translated to a goto flow table object destination which samples packets according to the provided sample ratio. Sampled packets are duplicated. One copy is processed by a termination table, named the sample table, which sends the packet to the eswitch manager port (that will be processed by software). The second copy is processed by the default table which executes the subsequent actions. The default table is created per <vport, chain, prio> tuple as rules with different prios and chains may overlap. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-07net/mlx5e: TC, Handle sampled packetsChris Mi4-3/+35
Mark the sampled packets with a sample restore object. Send sampled packets using the psample api. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-07net/mlx5e: TC, Refactor tc update skb functionChris Mi1-26/+33
As a pre-step to process sampled packet in this function. Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-07net/mlx5e: TC, Add sampler restore handle APIChris Mi1-0/+108
Use common object pool to create an object ID to map sample parameters. Allocate a modify header action to write the object ID to reg_c0 lower 16 bits. Create a restore rule to pass the object ID to software. So software can identify sampled packets via the object ID and send it to userspace. Aggregate the modify header action, restore rule and object ID to a sample restore handle. Re-use identical sample restore handle for the same object ID. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-07net/mlx5e: TC, Add sampler object APIChris Mi1-0/+131
In order to offload sample action, HW introduces sampler object. The sampler object samples packets according to the provided sample ratio. Sampled packets are duplicated. One copy is processed by a termination table, named the sample table, which sends the packet up to software. The second copy is processed by the default table. Instantiate sampler object. Re-use identical sampler object for the same sample ratio, sample table and default table as a prestep for offloading tc sample actions. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 23:14:37 +0300