summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-04-12mt76: mt7915: add missing capabilities for DBDCRyder Lee1-21/+29
This improves dbdc performance. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: check mcu returned values in mt7921_startLorenzo Bianconi1-5/+14
Properly check returned values from mcu utility routines in mt7921_start. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix the base of the dynamic remapSean Wang1-2/+2
We should change the base for the dynamic remap into another one, because the current base (0xe0000) have been the one used to operate the device ownership. Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix the base of PCIe interruptSean Wang2-3/+3
Should use 0x10000 as the base to operate PCIe interrupt according to the vendor reference driver. Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: get rid of mt7921_sta_rc_update routineLorenzo Bianconi1-9/+0
Since the rate selection is currently managed by the fw, get rid of empty mt7921_sta_rc_update routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_listLorenzo Bianconi1-5/+10
Since mt76_txq_send_burst routine can report a negative error code, check the returned value before incrementing the number of transmitted frames in mt76_txq_schedule_list routine. Return -EBUSY directly if the device is in reset or in power management. Fixes: 90fdc1717b186 ("mt76: use mac80211 txq scheduling") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: fix kernel warning adding monitor interfaceLorenzo Bianconi1-0/+1
Fix the following kernel warning adding a monitor interface in mt76_connac_mcu_uni_add_dev routine. [ 507.984882] ------------[ cut here ]------------ [ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0 [ 508.065461] Hardware name: MT7622_MT7531 RFB (DT) [ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.087367] sp : ffffffc013a33930 [ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0 [ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008 [ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610 [ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8 [ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8 [ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000 [ 508.122482] x17: 00000000ffffffff x16: 0000000000000000 [ 508.127785] x15: 0000000000000080 x14: ffffff801d704000 [ 508.133087] x13: 0000000000000040 x12: 0000000000000002 [ 508.138389] x11: 000000000000000c x10: 0000000000000000 [ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001 [ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000 [ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006 [ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000 [ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0 [ 508.170200] Call trace: [ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.184394] drv_add_interface+0x34/0x88 [mac80211] [ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211] [ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211] [ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211] [ 508.205372] __dev_open+0xcc/0x150 [ 508.208763] __dev_change_flags+0x134/0x198 [ 508.212937] dev_change_flags+0x20/0x60 [ 508.216764] devinet_ioctl+0x3e8/0x748 [ 508.220503] inet_ioctl+0x1e4/0x350 [ 508.223983] sock_do_ioctl+0x48/0x2a0 [ 508.227635] sock_ioctl+0x310/0x4f8 [ 508.231116] do_vfs_ioctl+0xa4/0xac0 [ 508.234681] ksys_ioctl+0x44/0x90 [ 508.237985] __arm64_sys_ioctl+0x1c/0x48 [ 508.241901] el0_svc_common.constprop.1+0x7c/0x100 [ 508.246681] el0_svc_handler+0x18/0x20 [ 508.250421] el0_svc+0x8/0x1c8 [ 508.253465] ---[ end trace c7b90fee13d72c39 ]--- [ 508.261278] ------------[ cut here ]------------ Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix mib stats counter reporting to mac80211Ryder Lee3-27/+24
In order to properly report MIB counters to mac80211, resets stats in mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters. Sum up MIB counters in mt7915_mac_update_mib_stats routine. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix mib stats counter reporting to mac80211Lorenzo Bianconi3-23/+19
In order to properly report MIB counters to mac80211, resets stats in mt7615_get_stats routine and hold mt76 mutex accessing MIB counters. Sum up MIB counters in mt7615_mac_update_mib_stats routine. Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: remove hdr->fw_ver checkRyder Lee1-2/+1
Only mt7615 uses v1 version. Also, some of released firmware doesn't have hdr->fw_ver. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix TSF configurationRyder Lee4-7/+28
The index of TSF counters should follow HWBSSID. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix stats register definitionsLorenzo Bianconi4-31/+31
Fix register definitions for mac80211 stats reporting. Move mib counter reset to mt7921_get_stats routine. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: remove unneeded semicolonJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1402:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix aggr len debugfs nodeLorenzo Bianconi1-1/+1
Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix aggr length histogramLorenzo Bianconi2-6/+5
Fix register definitions for 802.11 aggr length histogram estimation. Fixes: 474a9f21e2e2 ("mt76: mt7921: add debugfs support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix memory leak in mt7615_coredump_workLorenzo Bianconi1-2/+4
Similar to the issue fixed in mt7921_coredump_work, fix a possible memory leak in mt7615_coredump_work routine. Fixes: d2bf7959d9c0f ("mt76: mt7663: introduce coredump support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: add support for rx decapsulation offloadRyder Lee9-13/+127
For AP and Client mode, the hardware can pass received packets as 802.3 frames that can be passed to the network stack as-is. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: add rx checksum offload supportRyder Lee2-0/+5
Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated the IP and TCP/UDP checksum Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: enable hw rx-amsdu de-aggregationRyder Lee4-3/+19
Enable hw rx-amsdu de-aggregation support. This is a preliminary patch to enable rx checksum offload. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: use threaded NAPIFelix Fietkau7-7/+10
With threaded NAPI, the rx handler function is no longer bound to the CPU that fired the interrupt, which significantly helps to spread the workload over multiple CPUs, especially when multiple devices are using threaded NAPI at the same time. Exclude the tx handler from threaded NAPI by using a separate dummy netdev. The work is small and short-lived enough that it makes more sense to run it in softirq instead of creating a dedicated thread Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: update sched_scan cmd usageSean Wang4-10/+21
Update sched_scan command usage according to the current firmware submitted into linux-firmware.git. Fixes: 80fc1e37c0eb ("mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scan") Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: add flush operationSean Wang1-0/+10
add flush operation to make sure cfg80211_mlme_deauth is able to flush the deauthtication frame into air immediately. Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fixup rx bitrate statisticsSean Wang2-79/+86
Since the related rx bitrate fields have been moved to group3 in Rxv, fix rx bitrate statistics in mt7921_mac_fill_rx routine. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bssSean Wang1-0/+2
Use proper value for ht40 mode configuration in mt76_connac_mcu_uni_add_bss routine and not ht20 one Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library") Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: switch to new api for hardware beacon filterSean Wang2-17/+40
Current firmware only supports new api for enabling hardware beacon filter. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Beacon filter cmd have to rely on the associatied access point's beacon interval and DTIM information. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix memory leak in mt7921_coredump_workSean Wang1-2/+4
Fix possible memory leak in mt7921_coredump_work. Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix suspend/resume sequenceSean Wang1-7/+7
Any pcie access should happen in pci D0 state and we should give ownership back to the device at the end of the suspend procedure. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open codedRyder Lee5-11/+11
Use PCI standard defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_reqLorenzo Bianconi1-0/+12
As done for mt76_connac_mcu_alloc_wtbl_req, even if this is not a real bug since mt7915_mcu_alloc_wtbl_req routine can fails just if nskb is NULL, always check return value from mt7915_mcu_alloc_wtbl_req in order to avoid possible future mistake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_reqLorenzo Bianconi2-0/+6
Even if this is not a real bug since mt76_connac_mcu_alloc_wtbl_req routine can fails just if nskb is NULL , always check return value from mt76_connac_mcu_alloc_wtbl_req in order to avoid possible future mistake. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt76x0: disable GTK offloadingDavid Bauer1-0/+4
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE), only the first one to be created will transmit properly encrypteded frames. All subsequently created VAPs will sent out frames with the payload left unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially disclosing information to a third party. Disable GTK offloading and encrypt these frames in software to circumvent this issue. THis only seems to be necessary on MT7610 chips, as MT7612 is not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: always use WTBL_MAX_SIZE for tlv allocationRyder Lee5-32/+2
Simplify WTBL defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: removed unused definitions in mcu.hLorenzo Bianconi1-23/+0
Get rid of the following definitions in mt7921/mcu.h since they are not actually used: - MT7921_WTBL_UPDATE_MAX_SIZE - MT7921_STA_UPDATE_MAX_SIZE - MT7921_WTBL_UPDATE_BA_SIZE Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: remove unnecessary variableNigel Christian1-2/+1
In mt7921_pm_set() the variable "ret" is initialized to zero and then returned. Remove it and return zero. Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7921: enable random mac addr during scanningLorenzo Bianconi1-0/+1
Notify mac80211 mt7921 devices support random mac address during hw frequency scanning Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: support loading EEPROM for MT7613BESander Vanheule1-0/+1
EEPROM blobs for MT7613BE radios start with (little endian) 0x7663, which is also the PCI device ID for this device. The EEPROM is required for the radio to work at useful power levels, otherwise only the lowest power level is available. Suggested-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: fix tx skb dma unmapFelix Fietkau1-1/+1
The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: fix tx skb dma unmapFelix Fietkau1-1/+1
The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7615: fix key set/delete issuesFelix Fietkau3-51/+65
There were multiple issues in the current key set/remove code: - deleting a key with the previous key index deletes the current key - BIP key would only be uploaded correctly initially and corrupted on rekey Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: add support for rx decapsulation offloadFelix Fietkau6-11/+92
For AP and Client mode, the hardware can pass received packets as 802.3 frames that can be passed to the network stack as-is. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: add rx checksum offload supportFelix Fietkau2-0/+6
Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated the IP and TCP/UDP checksum Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: mt7915: enable hw rx-amsdu de-aggregationLorenzo Bianconi5-4/+76
Enable hw rx-amsdu de-aggregation support available in 7915 devices. This is a preliminary patch to enable rx checksum offload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11mt76: add support for 802.3 rx framesFelix Fietkau8-18/+32
Do not try to access the header when receiving them Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-11iwlegacy: avoid -Wempty-body warningArnd Bergmann3-5/+1
There are a couple of warnings in this driver when building with W=1: drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_power_set_mode': drivers/net/wireless/intel/iwlegacy/common.c:1195:60: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 1195 | il->chain_noise_data.state); | ^ drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_do_scan_abort': drivers/net/wireless/intel/iwlegacy/common.c:1343:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] Change the empty debug macros to no_printk(), which avoids the warnings and adds useful format string checks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210322104343.948660-3-arnd@kernel.org
2021-04-11mt7601u: enable TDLS supportLorenzo Bianconi1-0/+1
Notify mac80211 the mt7601u chipset support 802.11 TDLS. The feature has been tested with a mt7610u peer. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/8f9fd662cdbbb70ba896f1bea80e696b15011d3f.1614536496.git.lorenzo@kernel.org
2021-04-11mt7601u: fix always true expressionColin Ian King1-1/+1
Currently the expression ~nic_conf1 is always true because nic_conf1 is a u16 and according to 6.5.3.3 of the C standard the ~ operator promotes the u16 to an integer before flipping all the bits. Thus the top 16 bits of the integer result are all set so the expression is always true. If the intention was to flip all the bits of nic_conf1 then casting the integer result back to a u16 is a suitabel fix. Interestingly static analyzers seem to thing a bitwise ! should be used instead of ~ for this scenario, so I think the original intent of the expression may need some extra consideration. Addresses-Coverity: ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
2021-04-11rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()Dan Carpenter1-1/+1
The sscanf() function returns the number of matches (0 or 1 in this case). It doesn't return error codes. We should return -EINVAL if the string is invalid Fixes: c376c1fc87b7 ("rtw88: add h2c command in debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YE8nmatMDBDDWkjq@mwanda
2021-04-11rtw88: coex: fix A2DP stutters while WL busy + WL scanChing-Te Ku2-4/+6
While WL scan, WL is more high priority than BT. The packets from AP will be a big interference to A2DP. It will lead to A2DP stutters. Stop answering CTS to AP to decrease AP's packets Tx while WL scan + WL busy. Enable BT AFH feature to make BT leave away from WL channel. Desired BT firmware BT-COEX version: 0x1c Desired WL firmware version: 9.9.x Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-8-pkshih@realtek.com
2021-04-11rtw88: 8822c: add LC calibration for RTL8822CPo-Hao Huang5-2/+47
Fix power tracking issue by replacing unnecessary IQ calibration with LC calibration. When thermal difference exceeds limitation, let RF circuit adjsut its characteristic to fit in current environment. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-6-pkshih@realtek.com
2021-04-11rtw88: 8822c: update tx power limit table to RF v40.1Zong-Zhe Yang1-343/+343
update tx power limits to RF v40 and apply fix on FCC's channel 12 and 13, so change the patch level to 1. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-5-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 19:51:47 +0300