summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-04-14r8169: add support for pause ethtool opsHeiner Kallweit1-0/+28
This adds support for the [g|s]et_pauseparam ethtool ops. It considers that the chip doesn't support pause frame use in jumbo mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Merge branch '10GbE' of ↵David S. Miller4-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2021-04-13 This series contains updates to ixgbe and ixgbevf driver. Jostar Yang adds support for BCM54616s PHY for ixgbe. Chen Lin removes an unused function pointer for ixgbe and ixgbevf. Bhaskar Chowdhury fixes a typo in ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: stmmac: Add support for external trigger timestampingTan Tee Min7-1/+99
The Synopsis MAC controller supports auxiliary snapshot feature that allows user to store a snapshot of the system time based on an external event. This patch add supports to the above mentioned feature. Users will be able to triggered capturing the time snapshot from user-space using application such as testptp or any other applications that uses the PTP_EXTTS_REQUEST ioctl request. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Tan Tee Min <tee.min.tan@intel.com> Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: swap 1G/10G modes on autonegIvan Bornyakov1-28/+89
Setting 10G without autonegotiation is invalid according to phy_ethtool_ksettings_set(). Thus, we need to set it during autonegotiation. If 1G autonegotiation can't complete for quite a time, but there is signal in line, switch line interface type to 10GBase-R, if supported, in hope for link to be established. And vice versa. If 10GBase-R link can't be established for quite a time, and autonegotiation is enabled, and there is signal in line, switch line interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if supported. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: move read_status after config_anegIvan Bornyakov1-98/+98
No functional changes, just move read link status routines below autonegotiation configuration to make future functional changes more distinct. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: check that link is operationalIvan Bornyakov1-0/+43
Some SFP modules uses RX_LOS for link indication. In such cases link will be always up, even without cable connected. RX_LOS changes will trigger link_up()/link_down() upstream operations. Thus, check that SFP link is operational before actual read link status. If there is no SFP cage connected to the tranciever, check only PMD Recieve Signal Detect register. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net/mlx5e: Fix RQ creation flow for queues which doesn't support XDPAya Levin1-2/+3
Allow to create an RQ which is not registered as an XDP RQ. For example: the trap-RQ doesn't register as an XDP RQ. Fixes: 869c5f926247 ("net/mlx5e: Generalize open RQ") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Replace spaces with tab at the start of a lineWenpeng Liang1-1/+1
There should be no spaces at the start of the line. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Remove return statement exist at the end of void functionWenpeng Liang3-4/+0
void function return statements are not generally useful. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Add a blank line after declarationsWenpeng Liang2-2/+3
There should be a blank lines after declarations. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Fix bit-wise and with zeroColin Ian King1-1/+1
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended to be a bit-flag. Fix this by using the == operator as was originally intended. Addresses-Coverity: ("Logically dead code") Fixes: 7dfee4b1d79e ("net/mlx5: IPsec, Refactor SA handle creation and destruction") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Alloc cmd buffer with kvzalloc() instead of kzalloc()Roi Dayan2-5/+5
The cmd size is 8K so use kvzalloc(). Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Use variably sized data structures for different actionsJianbo Liu4-159/+199
mlx5dr_action is a generally used data structure, and there is an union for different types of actions in it. The size of mlx5dr_action is about 72 bytes, but for those actions with fewer fields, most of the allocated memory is wasted. Remove this union, and mlx5dr_action becomes a generic action header. Then actions are dynamically allocated with needed memory, the data for each action is stored right after the header. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Reuse stored hardware function idParav Pandit1-3/+2
SF's hardware function id is already stored in mlx5_sf. Reuse it, instead of querying the hw table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Use device pointer directlyParav Pandit1-8/+8
At many places in the code, device pointer is directly available. Make use of it, instead of accessing it from the table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Initialize eswitch acls ns when eswitch is enabledParav Pandit3-55/+93
Currently eswitch flow steering (FS) namespace of vport's ingress and egress ACL are enabled when FS layer is initialized. This is done even when eswitch is diabled. This demands that total eswitch ports to be known to FS layer without eswitch in use. Given the FS core is not dependent on eswitch, make namespace init and cleanup routines as helper routines to be invoked only when eswitch is needed. With this change, ingress and egress ACL namespaces are created only when eswitch legacy/offloads mode is enabled. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Move legacy code to a individual fileParav Pandit5-507/+539
Currently eswitch offers two modes. Legacy and offloads. Offloads code is already in its own file eswitch_offloads.c However eswitch.c contains the eswitch legacy code and common infrastructure code. To enable future extensions and to better manage generic common eswitch infrastructure code, move the legacy code to its own legacy.c file. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Convert a macro to a helper routineParav Pandit2-17/+20
Convert ESW_ALLOWED macro to a helper routine so that it can be used in other eswitch files. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch Make cleanup sequence mirror of initParav Pandit1-2/+1
Make cleanup sequence mirror of init sequence for cleaning up reps and freeing vports. Also when reps initialization fails, there is no need to perform reps cleanup. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Make vport number u16Parav Pandit2-2/+3
Vport number is 16-bit field in hardware. Make it u16. Move location of vport in the structure so that it reduces a hole in the structure. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Skip querying SF enabled bitsParav Pandit1-6/+0
With vhca events, SF state is queried through the VHCA events. Device no longer expects SF bitmap in the query eswitch functions command. Hence, remove it to simplify the code. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, let user to enable disable metadataParav Pandit4-7/+88
Currently each packet inserted in eswitch is tagged with a internal metadata to indicate source vport. Metadata tagging is not always needed. Metadata insertion is needed for multi-port RoCE, failover between representors and stacked devices. In many other cases, metadata enablement is not needed. Metadata insertion slows down the packet processing rate of the E-switch when it is in switchdev mode. Below table show performance gain with metadata disabled for VXLAN offload rules in both SMFS and DMFS steering mode on ConnectX-5 device. ---------------------------------------------- | steering | metadata | pkt size | rx pps | | mode | | | (million) | ---------------------------------------------- | smfs | disabled | 128Bytes | 42 | ---------------------------------------------- | smfs | enabled | 128Bytes | 36 | ---------------------------------------------- | dmfs | disabled | 128Bytes | 42 | ---------------------------------------------- | dmfs | enabled | 128Bytes | 36 | ---------------------------------------------- Hence, allow user to disable metadata using driver specific devlink parameter. Metadata setting of the eswitch is applicable only for the switchdev mode. Example to show and disable metadata before changing eswitch mode: $ devlink dev param show pci/0000:06:00.0 name esw_port_metadata pci/0000:06:00.0: name esw_port_metadata type driver-specific values: cmode runtime value true $ devlink dev param set pci/0000:06:00.0 \ name esw_port_metadata value false cmode runtime $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- changelog: v1->v2: - added performance numbers in commit log - updated commit log and documentation for switchdev mode - added explicit note on when user can disable metadata in documentation
2021-04-14iwlwifi: dbg: disable ini debug in 9000 family and belowMukesh Sisodiya1-2/+3
Yoyo based debug is not applicable to old devices. As init debug is enabled by default in the driver, it needs to be disabled to work the old debug mechanism in old devices. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Fixes: b0d8d2c27007 ("iwlwifi: yoyo: enable yoyo by default") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: Change ma product string nameMatti Gottlieb3-5/+5
Change ma product string name to the correct name, and to reflect the CRF and not the CNV. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: fw: print out trigger delay when collecting dataJohannes Berg1-1/+3
It can be confusing to see "Collecting data: ..." followed by that not actually happening immediately so print out the delay in that message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.5bd095dc579a.Id1f3b746ac61497951638ba7ce70fc4b63dd87d1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: trans/pcie: defer transport initialisationJohannes Berg3-39/+57
In a few PCIe devices we may have to swap out the configuration after we allocate/initialise some parts of the device because we only know the correct one after reading some registers. This causes some things such as the byte-count table allocations to be incorrect, since the configuration is swapped for one with a bigger queue size. Fix this by initialising most of the transport much later, only after the configuration has finally been determined. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: bump FW API to 63 for AX devicesLuca Coelho1-1/+1
Start supporting API version 63 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.a588a9dacd98.Ie4f96b8988c2cbd5f096ee64d0eb0f4829d55aee@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't WARN if we can't remove a time eventEmmanuel Grumbach1-2/+2
It is not very useful to WARN if we can't send a host command The firmware is likely in a bad situation and the fact that we didn't send the host command has an impact on the firmware only, not on the driver. The driver could clean up all its state. Don't WARN in this case, but just leave a smaller note. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.0324abc169c8.I4f9b769bc38d68f8ed43f77d2cd75e8f1993e964@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't disconnect immediately if we don't hear beacons after CSAEmmanuel Grumbach1-1/+12
When we switch channel, we may miss a few beacons on the new channel. Don't disconnect if the time event for the switch ends before we hear the beacons. Note that this is relevant only for old devices that still use the TIME_EVENT firmware API for channel switch. The check that we hear a beacon before the time event ends was meant to be used for the association time event and not for the channel switch time event. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.3d710091a0bd.I37a161ffdfb099a10080fbdc3b70a4deb76952e2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: rs-fw: don't support stbc for HE 160Mordechay Goodstein1-12/+8
Our HE doesn't support it so never set HE 160 stbc Fixes: 3e467b8e4cf4 ("iwlwifi: rs-fw: enable STBC in he correctly") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.550fd1903eb7.I8ddbc2f87044a5ef78d916c9c59be797811a1b7f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: warn on SKB free w/o op-modeJohannes Berg1-1/+3
If this ever happens, and it looks like some code in PCIe is a bit broken and might lead to this, we want to know without crashing, so add a WARN_ON_ONCE(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.a18b7443dc55.Ia29836738acf14a55af5504aba90c6fea9fff785@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: add support for version 3 of LARI_CONFIG_CHANGE command.Miri Korenblit3-16/+29
Add support for version 3 of the LARI_CONFIG_CHANGE command. This is needed to support FW API change which is needed to support 11ax enablement in Russia. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.7e68856c8a95.I83acdbe39b63c363cabc04ad42d1d0b9ce98901c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: add ISR debug info for msix debugMordechay Goodstein2-5/+16
The debug prints help in case we get timeout on waiting for hw. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.306e2e56d3e8.I72e2977abbb1fddf23b8476bedf6a183fe969ff5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: merge napi_poll_msix functionsMordechay Goodstein1-33/+10
The only difference between iwl_pcie_napi_poll_msix_shared() and iwl_pcie_napi_poll_msix() is when we have a shared queue and nothing in the rx queue. This case doesn't affect CPU performance, so we can merge the two functions. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9d1b61ef53a5.I60b33d5379cf7c12f1de30fc3fd4cefc38220141@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't lock mutex in RCU critical sectionJohannes Berg1-6/+4
We cannot lock a mutex while we're in an RCU critical section. At the same time, we're accessing data structures that are protected by the mvm->mutex anyway, so just move the entire locking here to use only that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.4d27bd36e10e.I1fd8e8fe442c41a5deaa560452b598ed7a60ada5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: remove PS from lower rates.Mordechay Goodstein1-4/+2
Power save (PS) should only be enabled when we reach the max phy rate. Before we reach it (MCS_9) for VHT, we should keep trying to improve the throughput. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.2a2fb9f9c25e.I7c7bbcfbdc1d35d2c3338778fb397dd5b08ea0e8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: umac error table mismatchRoee Goldfiner3-6/+8
umac_error_table In TLV address was read using mask on MSB but on the same table in alive message it was without which caused mismatch in devices with different memory region MSB Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: queue: avoid memory leak in reset flowMordechay Goodstein3-28/+9
In case the device is stopped any usage of hw queues needs to be reallocated in fw due to fw reset after device stop, so all driver internal queue should also be freed, and if we don't free the next usage would leak the old memory and get in recover flows "iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning. Also warn about trying to reuse an internal allocated queue. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: don't warn if we can't wait for empty tx queuesEmmanuel Grumbach1-2/+3
If the firmware is dead, the Tx queues won't drain, but leaving a print in the log is enough, no need to WARN. If the firmware is dead, we must already have printed enough information in the log anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9a438b2320a9.I4aa897178df82acefd80173d76dd6849ad1bcdc1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: remove remaining software checksum codeJohannes Berg2-16/+6
After the removal of the software checksum code for the A-MSDU path that we had for testing, the csum_skb variable stuck around. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.280f268ae679.Iad455b6c91e427c9f74963bbd3eb0ce743aaac53@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: remove TCM eventsEmmanuel Grumbach2-17/+2
Nobody uses that in the user space. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.b6560a5de0cd.I5dac9c60faed7f48b06d352aa2d65bcf8142c2dc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: Use IWL_INFO in fw_reset_handshake()Ravi Darsi1-2/+2
Debug message "firmware didn't ACK the reset - continue anyway\n" in fw_reset_handshake() is classified as error, however this is not an error as it is ignored. So, change it to info message for proper classification of debug messages. Signed-off-by: Ravi Darsi <ravi.darsi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: refactor ACPI DSM evaluation functionHarish Mitty3-83/+55
Instead of implementing the DSM evaluation function in the MVM code, refactor it so it can be generalized and part of the common ACPI implementation. Signed-off-by: Harish Mitty <harish.mitty@intel.com> [reworded subject and commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.a24af3551aac.I8e6bd5eb05f853b6331fa4823750f7ba8ffe46e6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: support BIOS enable/disable for 11ax in UkraineMiri Korenblit4-0/+45
Read the new BIOS DSM and Pass to FW if to disable\enable 11ax for Ukraine according to the BIOS key. this is needed to enable OEMs to control enable/disable 11ax in Ukraine Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.055654e7707e.If7eaf9839cd5d59729a235df07e31668b408e740@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: move iwl_configure_rxq to be used by other op_modesMordechay Goodstein3-58/+63
All the op_modes need to send this command as well. Instead of duplicating the code from mvm, put the code in a common place. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.deb71fce883a.I5eef009512f180e5974f3f491ff56c763cdcc878@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add new so-gf deviceybaruch1-1/+8
add new so-gf device to the driver. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d6b0c1f85a7e.I2098ca066607edc48336021ea2e5afdbf8196acf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: enable PPAG in ChinaMiri Korenblit4-46/+65
Add support for ppag in China by reading revision 2 of the ppag table from ACPI, and passing the data to the FW. This is needed to enable OEMs to control ppag enablement in China. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.69af388d0dce.I8cfddf9e6837bf394b00390181b4b774ded19acd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: Add support for 6GHz passive scanIlan Peer7-0/+148
When doing scan while 6GHz channels are not enabled, the 6GHz band is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands (that will allow discovery of geographic location etc. that would allow enabling the 6GHz channels) but there are non collocated APs on 6GHz PSC channels these would never be discovered. To overcome this, FW added support for performing passive UHB scan in case no APs were discovered during scan on the 2GHz and 5GHz channels. Add support for enabling such scan when the following conditions are met: - 6GHz channels are supported but not enabled by regulatory. - Station interface is not associated or less than a defined time interval passed from the last resume or HW reset flows. - At least 4 channels are included in the scan request - The scan request includes the widlcard SSID. - At least 50 minutes passed from the last 6GHz passive scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add ax201 killer deviceybaruch3-0/+8
add new killer devices configurations. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiationAvraham Stern1-0/+9
When associated to the resonder with PMF, request to protect the NDP ranging negotiation with PMF. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.e7982c72e12b.Ib6db362d01a31132c638e194d49476cd8e3ff430@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 10:43:37 +0300