summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21mt76: mt7921: introduce mt7921_dma_{enable,disable} utilitiesLorenzo Bianconi1-73/+35
Introduce mt7921_dma_enable and mt7921_dma_disable utilities routine in order for code reusing between mt7921_dma_reset and mt7921_dma_init. This is a preliminary patch to reset dma during device driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: introduce mt7921_wpdma_reset utility routineLorenzo Bianconi3-28/+47
Introduce mt7921_wpdma_reset routine to reset wpdma during chip reset or driver_own request. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move mt7921_dma_reset in dma.cLorenzo Bianconi3-68/+74
Move mt7921_dma_reset routine in dma.c and make mt7921_dma_prefetch static. Moreover add force parameter to mt7921_dma_reset signature. This is a preliminary patch to reset dma mt7921_mcu_drv_pmctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: Fix a dereference of pointer sta before it is null checkedColin Ian King1-1/+2
Currently the assignment of idx dereferences pointer sta before sta is null checked, leading to a potential null pointer dereference. Fix this by assigning idx when it is required after the null check on pointer sta. Addresses-Coverity: ("Dereference before null check") Fixes: a4a5a430b076 ("mt76: mt7615: fix TSF configuration") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: enable sw interruptsLorenzo Bianconi4-7/+25
Enable sw interrupts in order to wake the device from deep sleep receiving packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add awake and doze time accountingLorenzo Bianconi4-7/+55
Introduce awake and doze time accounting for runtime pm. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: remove MT76_STATE_PM in tx pathLorenzo Bianconi1-4/+2
since tx/rx path is now relying pm ref counting, get rid of MT76_STATE_PM check in the tx path Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: use waitqueue for runtime-pmLorenzo Bianconi6-9/+9
Simplify the code using a wait_queue_head_t instead of a completion to wait the chip is fully awake in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: do not run mt76_txq_schedule_all directlyLorenzo Bianconi2-4/+2
In order to not break runtime-pm, do run mt76_txq_schedule_all in mt7615_set_channel/mt7921_set_channel but rely on mt76_worker_schedule Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: rely on pm refcounting in mt7615_led_set_configLorenzo Bianconi1-1/+3
Rely on mt76_connac_pm_ref/mt76_connac_pm_unref utility routines in mt7615_led_set_config Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: alaways wake the device before scanningLorenzo Bianconi3-8/+8
move scanning check from mt76_connac_power_save_sched routine to mt7921_pm_power_save_work/mt7615_pm_power_save_work ones Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: get rid of useless MT76_STATE_PM in mt7921_mac_workLorenzo Bianconi1-5/+0
Remove useless MT76_STATE_PM check in mt7921_mac_work since mt7921_mutex_acquire will wake up the device if necessary Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: remove MT76_STATE_PM in mac_tx_freeLorenzo Bianconi2-10/+0
Get rid of MT76_STATE_PM chec in mt7615_mac_tx_free and mt7921_mac_tx_free since we already rely on mt76_connac_pm_unref in the NAPI callback. Remove mt76_connac_power_save_sched calls in mt7615_mac_tx_free and mt7921_mac_tx_free Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: check wake refcount in mcu_fw_pmctrlLorenzo Bianconi3-2/+14
In order to avoid synchronization races between tx and rx path, rely on mt76_connac_skip_fw_pmctrl putting the chip in sleep mode for mt7921 and mt7663 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: unschedule ps_work in mt76_connac_pm_wakeLorenzo Bianconi3-2/+1
In order to avoid synchronization issues between wake and ps works, cancel ps_work in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi2-6/+34
Introduce mt7615_poll_rx rx napi callback for mt7663. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi3-8/+37
Introduce mt7921_poll_rx rx napi callback for mt7921. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: dma: add the capability to define a custom rx napi poll routineLorenzo Bianconi8-12/+14
Add the capability to define a custom rx napi callback for each driver. This is a preliminary patch to properly support runtime-pm on rx side Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi5-18/+25
Introduce mt7615_tx_worker routine as mt76 tx worker callback for mt7663. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi3-14/+13
Introduce mt7921_tx_worker routine as mt76 tx worker callback for mt7921. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: introduce wake counter for fw_pmctrl synchronizationLorenzo Bianconi1-0/+31
Introduce wake counter and related spinlock in order to synchronize tx/rx path and fw_pmctrl request. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: fix a race between mt7615_mcu_drv_pmctrl and mt7615_mcu_fw_pmctrlLorenzo Bianconi2-6/+15
Introduce a mutex in order to avoid a race between mt7615_mcu_lp_drv_pmctrl and mt7615_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1f549009b5b2 ("mt76: mt7615: do not request {driver,fw}_own if already granted") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: fix a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrlLorenzo Bianconi3-10/+26
Introduce a mutex in order to avoid a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: remove leftover function declarationLorenzo Bianconi1-2/+0
Get rid of leftover mt7921_mcu_add_bss_info routine declaration Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: move mcu_update_arp_filter in mt76_connac moduleLorenzo Bianconi8-104/+58
Move mt76_connac_mcu_update_arp_filter in mt76_connac module since the code is shared between mt7615 and mt7921 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21net: ethernet: ravb: Fix release of refclkAdam Ford1-3/+4
The call to clk_disable_unprepare() can happen before priv is initialized. This means moving clk_disable_unprepare out of out_release into a new label. Fixes: 8ef7adc6beb2 ("net: ethernet: ravb: Enable optional refclk") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: phy: intel-xway: enable integrated led functionsMartin Schiller1-0/+21
The Intel xway phys offer the possibility to deactivate the integrated LED function and to control the LEDs manually. If this was set by the bootloader, it must be ensured that the integrated LED function is enabled for all LEDs when loading the driver. Before commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") the LEDs were enabled by a soft-reset of the PHY (using genphy_soft_reset). Initialize the XWAY_MDIO_LED with it's default value (which is applied during a soft reset) instead of adding back the soft reset. This brings back the default LED configuration while still preventing an excessive amount of soft resets. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: renesas: ravb: Fix a stuck issue when a lot of frames are receivedYoshihiro Shimoda1-23/+12
When a lot of frames were received in the short term, the driver caused a stuck of receiving until a new frame was received. For example, the following command from other device could cause this issue. $ sudo ping -f -l 1000 -c 1000 <this driver's ipaddress> The previous code always cleared the interrupt flag of RX but checks the interrupt flags in ravb_poll(). So, ravb_poll() could not call ravb_rx() in the next time until a new RX frame was received if ravb_rx() returned true. To fix the issue, always calls ravb_rx() regardless the interrupt flags condition. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: stmmac: fix TSO and TBS feature enabling during driver openOng Boon Leong1-3/+9
TSO and TBS cannot co-exist and current implementation requires two fixes: 1) stmmac_open() does not need to call stmmac_enable_tbs() because the MAC is reset in stmmac_init_dma_engine() anyway. 2) Inside stmmac_hw_setup(), we should call stmmac_enable_tso() for TX Q that is _not_ configured for TBS. Fixes: 579a25a854d4 ("net: stmmac: Initial support for TBS") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21stmmac: intel: set TSO/TBS TX Queues default settingsOng Boon Leong1-0/+3
TSO and TBS cannot coexist, for now we set Intel mGbE controller to use below TX Queue mapping: TxQ0 uses TSO and the rest of TXQs supports TBS. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21stmmac: intel: unlock on error path in intel_crosststamp()Dan Carpenter1-0/+1
We recently added some new locking to this function but one error path was overlooked. We need to drop the lock before returning. Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21nfp: devlink: initialize the devlink port attribute "lanes"Yinjun Zhang1-0/+1
The number of lanes of devlink port should be correctly initialized when registering the port, so that the input check when running "devlink port split <port> count <N>" can pass. Fixes: a21cf0a8330b ("devlink: Add a new devlink port lanes attribute and pass to netlink") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: dsa: mv88e6xxx: Export cross-chip PVT as devlink regionTobias Waldekranz4-0/+78
Export the raw PVT data in a devlink region so that it can be inspected from userspace and compared to the current bridge configuration. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region sizeTobias Waldekranz1-1/+1
In the unlikely event of the VTU being loaded to the brim with 4k entries, the last one was placed in the buffer, but the size reported to devlink was off-by-one. Make sure that the final entry is available to the caller. Fixes: ca4d632aef03 ("net: dsa: mv88e6xxx: Export VTU as devlink region") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: dsa: mv88e6xxx: Correct spelling of define "ADRR" -> "ADDR"Tobias Waldekranz2-2/+2
Because ADRR is not a thing. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21octeontx2-af: Add mailbox for CPT statsSrujana Challa2-0/+160
Adds a new mailbox to get CPT stats, includes performance counters, CPT engines status and RXC status. Signed-off-by: Narayana Prasad Raju Atherya <pathreya@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21octeontx2-af: cn10k: Add mailbox to configure reassembly timeoutSrujana Challa2-7/+75
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. This patch adds a new mailbox to configure reassembly age or threshold. Signed-off-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21octeontx2-af: cn10k: Mailbox changes for CN10K CPTSrujana Challa2-1/+31
Adds changes to existing CPT mailbox messages to support CN10K CPT block. This patch also adds new register defines for CN10K CPT. Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com> Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21Merge tag 'wireless-drivers-2021-04-21' of ↵David S. Miller1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 As there was -rc8 release, one more important fix for v5.12. iwlwifi * fix spinlock warning in gen2 devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21mt76: mt7921: do not use 0 as NULL pointerLorenzo Bianconi1-1/+1
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1425:70: warning: Using plain integer as NULL pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: directly read per-rate tx power from registersShayne Chen2-22/+51
Since driver no longer handler per-rate tx power setting, we need to read the power values directly from registers. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen8-251/+99
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for DT rate power limitsShayne Chen1-6/+38
Enable to limit per-rate max txpower from DT. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: abort uncompleted scan by wifi resetSean Wang1-0/+8
Scan abort should be required for the uncompleted hardware scan interrupted by wifi reset. Otherwise, it is possible that the scan request after wifi reset gets error code -EBUSY from mac80211 and then blocks the reconnectting to the access point. Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add wifisys reset support in debugfsSean Wang1-8/+17
Introduce chip_reset knob in mt7921 debugfs to export a way to users able to trigger wifi reset, and group the similar operations previously defined in chip_config in the same knob. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutexLorenzo Bianconi1-1/+4
Wake the chip before configuring the mcu log level Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: improve mcu error loggingLorenzo Bianconi5-10/+8
Dump mcu command code in hex and related prefix to help debugging Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move hw configuration in mt7921_register_deviceLorenzo Bianconi2-13/+6
Get rid of init work since firmware loading is already performed in mt7921_init_hardware Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee9-10/+199
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: load ROM patch before checking patch semaphore statusFelix Fietkau1-14/+16
For MT7663, the availability of the patch files is used to detect, which corresponding firmware is going to be used (AP firmware or STA offload firmware). If the ROM patch was already applied, it could attempt to load the wrong firmware (without considering the alternative). Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 17:12:14 +0300