summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-03-02net: enetc: force the RGMII speed and duplex instead of operating in inband modeVladimir Oltean2-10/+56
The ENETC port 0 MAC supports in-band status signaling coming from a PHY when operating in RGMII mode, and this feature is enabled by default. It has been reported that RGMII is broken in fixed-link, and that is not surprising considering the fact that no PHY is attached to the MAC in that case, but a switch. This brings us to the topic of the patch: the enetc driver should have not enabled the optional in-band status signaling for RGMII unconditionally, but should have forced the speed and duplex to what was resolved by phylink. Note that phylink does not accept the RGMII modes as valid for in-band signaling, and these operate a bit differently than 1000base-x and SGMII (notably there is no clause 37 state machine so no ACK required from the MAC, instead the PHY sends extra code words on RXD[3:0] whenever it is not transmitting something else, so it should be safe to leave a PHY with this option unconditionally enabled even if we ignore it). The spec talks about this here: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/RGMIIv1_5F00_3.pdf Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: enetc: don't disable VLAN filtering in IFF_PROMISC modeVladimir Oltean1-5/+0
Quoting from the blamed commit: In promiscuous mode, it is more intuitive that all traffic is received, including VLAN tagged traffic. It appears that it is necessary to set the flag in PSIPVMR for that to be the case, so VLAN promiscuous mode is also temporarily enabled. On exit from promiscuous mode, the setting made by ethtool is restored. Intuitive or not, there isn't any definition issued by a standards body which says that promiscuity has anything to do with VLAN filtering - it only has to do with accepting packets regardless of destination MAC address. In fact people are already trying to use this misunderstanding/bug of the enetc driver as a justification to transform promiscuity into something it never was about: accepting every packet (maybe that would be the "rx-all" netdev feature?): https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ This is relevant because there are use cases in the kernel (such as tc-flower rules with the protocol 802.1Q and a vlan_id key) which do not (yet) use the vlan_vid_add API to be compatible with VLAN-filtering NICs such as enetc, so for those, disabling rx-vlan-filter is currently the only right solution to make these setups work: https://lore.kernel.org/netdev/CA+h21hoxwRdhq4y+w8Kwgm74d4cA0xLeiHTrmT-VpSaM7obhkg@mail.gmail.com/ The blamed patch has unintentionally introduced one more way for this to work, which is to enable IFF_PROMISC, however this is non-portable because port promiscuity is not meant to disable VLAN filtering. Therefore, it could invite people to write broken scripts for enetc, and then wonder why they are broken when migrating to other drivers that don't handle promiscuity in the same way. Fixes: 7070eea5e95a ("enetc: permit configuration of rx-vlan-filter with ethtool") Cc: Markus Blöchl <Markus.Bloechl@ipetronik.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: enetc: fix incorrect TPID when receiving 802.1ad tagged packetsVladimir Oltean2-8/+29
When the enetc ports have rx-vlan-offload enabled, they report a TPID of ETH_P_8021Q regardless of what was actually in the packet. When rx-vlan-offload is disabled, packets have the proper TPID. Fix this inconsistency by finishing the TODO left in the code. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: enetc: take the MDIO lock only once per NAPI poll cycleVladimir Oltean2-22/+11
The workaround for the ENETC MDIO erratum caused a performance degradation of 82 Kpps (seen with IP forwarding of two 1Gbps streams of 64B packets). This is due to excessive locking and unlocking in the fast path, which can be avoided. By taking the MDIO read-side lock only once per NAPI poll cycle, we are able to regain 54 Kpps (65%) of the performance hit. The rest of the performance degradation comes from the TX data path, but unfortunately it doesn't look like we can optimize that away easily, even with netdev_xmit_more(), there just isn't any skb batching done, to help with taking the MDIO lock less often than once per packet. We need to change the register accessor type for enetc_get_tx_tstamp, because it now runs under the enetc_lock_mdio as per the new call path detailed below: enetc_msix -> napi_schedule -> enetc_poll -> enetc_lock_mdio -> enetc_clean_tx_ring -> enetc_get_tx_tstamp -> enetc_clean_rx_ring -> enetc_unlock_mdio Fixes: fd5736bf9f23 ("enetc: Workaround for MDIO register access issue") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: enetc: initialize RFS/RSS memories for unused ports tooVladimir Oltean3-9/+36
Michael reports that since linux-next-20210211, the AER messages for ECC errors have started reappearing, and this time they can be reliably reproduced with the first ping on one of his LS1028A boards. $ ping 1[ 33.258069] pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 72.16.0.1 PING [ 33.267050] pcieport 0000:00:1f.0: AER: can't find device of ID0000 172.16.0.1 (172.16.0.1): 56 data bytes 64 bytes from 172.16.0.1: seq=0 ttl=64 time=17.124 ms 64 bytes from 172.16.0.1: seq=1 ttl=64 time=0.273 ms $ devmem 0x1f8010e10 32 0xC0000006 It isn't clear why this is necessary, but it seems that for the errors to go away, we must clear the entire RFS and RSS memory, not just for the ports in use. Sadly the code is structured in such a way that we can't have unified logic for the used and unused ports. For the minimal initialization of an unused port, we need just to enable and ioremap the PF memory space, and a control buffer descriptor ring. Unused ports must then free the CBDR because the driver will exit, but used ports can not pick up from where that code path left, since the CBDR API does not reinitialize a ring when setting it up, so its producer and consumer indices are out of sync between the software and hardware state. So a separate enetc_init_unused_port function was created, and it gets called right after the PF memory space is enabled. Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories") Reported-by: Michael Walle <michael@walle.cc> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: enetc: don't overwrite the RSS indirection table when initializingVladimir Oltean4-8/+18
After the blamed patch, all RX traffic gets hashed to CPU 0 because the hashing indirection table set up in: enetc_pf_probe -> enetc_alloc_si_resources -> enetc_configure_si -> enetc_setup_default_rss_table is overwritten later in: enetc_pf_probe -> enetc_init_port_rss_memory which zero-initializes the entire port RSS table in order to avoid ECC errors. The trouble really is that enetc_init_port_rss_memory really neads enetc_alloc_si_resources to be called, because it depends upon enetc_alloc_cbdr and enetc_setup_cbdr. But that whole enetc_configure_si thing could have been better thought out, it has nothing to do in a function called "alloc_si_resources", especially since its counterpart, "free_si_resources", does nothing to unwind the configuration of the SI. The point is, we need to pull out enetc_configure_si out of enetc_alloc_resources, and move it after enetc_init_port_rss_memory. This allows us to set up the default RSS indirection table after initializing the memory. Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories") Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02sh_eth: fix TRSCER mask for R7S9210Sergey Shtylyov1-0/+2
According to the RZ/A2M Group User's Manual: Hardware, Rev. 2.00, the TRSCER register has bit 9 reserved, hence we can't use the driver's default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data:: trscer_err_mask for R7S9210. Fixes: 6e0bb04d0e4f ("sh_eth: Add R7S9210 support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02sh_eth: fix TRSCER mask for R7S72100Sergey Shtylyov1-0/+2
According to the RZ/A1H Group, RZ/A1M Group User's Manual: Hardware, Rev. 4.00, the TRSCER register has bit 9 reserved, hence we can't use the driver's default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data::trscer_err_mask for R7S72100. Fixes: db893473d313 ("sh_eth: Add support for r7s72100") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02sh_eth: fix TRSCER mask for SH771xSergey Shtylyov1-0/+3
According to the SH7710, SH7712, SH7713 Group User's Manual: Hardware, Rev. 3.00, the TRSCER register actually has only bit 7 valid (and named differently), with all the other bits reserved. Apparently, this was not the case with some early revisions of the manual as we have the other bits declared (and set) in the original driver. Follow the suit and add the explicit sh_eth_cpu_data::trscer_err_mask initializer for SH771x... Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: phy: fix save wrong speed and duplex problem if autoneg is onGuangbin Huang1-2/+4
If phy uses generic driver and autoneg is on, enter command "ethtool -s eth0 speed 50" will not change phy speed actually, but command "ethtool eth0" shows speed is 50Mb/s because phydev->speed has been set to 50 and no update later. And duplex setting has same problem too. However, if autoneg is on, phy only changes speed and duplex according to phydev->advertising, but not phydev->speed and phydev->duplex. So in this case, phydev->speed and phydev->duplex don't need to be set in function phy_ethtool_ksettings_set() if autoneg is on. Fixes: 51e2a3846eab ("PHY: Avoid unnecessary aneg restarts") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02xen-netback: use local var in xenvif_tx_check_gop() instead of re-calculatingJan Beulich1-2/+2
shinfo already holds the result of skb_shinfo(skb) at this point - no need to re-invoke the construct even twice. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01net: phy: ti: take into account all possible interrupt sourcesIoana Ciornei2-9/+11
The previous implementation of .handle_interrupt() did not take into account the fact that all the interrupt status registers should be acknowledged since multiple interrupt sources could be asserted. Fix this by reading all the status registers before exiting with IRQ_NONE or triggering the PHY state machine. Fixes: 1d1ae3c6ca3f ("net: phy: ti: implement generic .handle_interrupt() callback") Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210226153020.867852-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-01can: tcan4x5x: tcan4x5x_init(): fix initialization - clear MRAM before ↵Torin Cooper-Bennun1-3/+3
entering Normal Mode This patch prevents a potentially destructive race condition. The device is fully operational on the bus after entering Normal Mode, so zeroing the MRAM after entering this mode may lead to loss of information, e.g. new received messages. This patch fixes the problem by first initializing the MRAM, then bringing the device into Normale Mode. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Link: https://lore.kernel.org/r/20210226163440.313628-1-torin@maxiluxsystems.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: mcp251xfd: revert "can: mcp251xfd: add BQL support"Marc Kleine-Budde1-17/+4
In the following 4 patches | 99842c9685ab can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length | 9420e1d495e2 can: dev: can_get_echo_skb(): extend to return can frame length | 1dcb6e57db83 can: dev: can_put_echo_skb(): extend to handle frame_len | f0ef72febc9a can: dev: extend struct can_skb_priv to hold CAN frame length the CAN echo SKB support was extended to hold the CAN frame length (which is the length of the CAN frame on the wire). It is meant as a helper for BQL support, to avoid the re-calculation of the frame length before sending it and on TX-completion. However if the CAN frame is send without the request to be looped back the SKB is discarded in can_put_echo_skb() and the subsequent can_get_echo_skb() and can_rx_offload_get_echo_skb() return 0 for the CAN frame length. This results in BQL stalling the TX queue after a few packages. Until the BQL helpers can_get_echo_skb() and can_rx_offload_get_echo_skb() are fixed, revert the BQL support for the mcp251xfd driver. This reverts commit 4162e18e949ba520d5116ac0323500355479a00e. Fixes: 4162e18e949b ("can: mcp251xfd: add BQL support") Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Link: https://lore.kernel.org/r/20210228083347.28580-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: invoke flexcan_chip_freeze() to enter freeze modeJoakim Zhang1-5/+7
Invoke flexcan_chip_freeze() to enter freeze mode, since need poll freeze mode acknowledge. Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-4-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: enable RX FIFO after FRZ/HALT validJoakim Zhang1-3/+7
RX FIFO enable failed could happen when do system reboot stress test: [ 0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator [ 0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.314640] flexcan 5a8d0000.can: registering netdev failed [ 0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator [ 0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.331360] flexcan 5a8e0000.can: registering netdev failed [ 0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator [ 0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.348117] flexcan 5a8f0000.can: registering netdev failed RX FIFO should be enabled after the FRZ/HALT are valid. But the current code enable RX FIFO and FRZ/HALT at the same time. Fixes: e955cead03117 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-3-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-01can: flexcan: assert FRZ bit in flexcan_chip_freeze()Joakim Zhang1-1/+1
Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although the reset value is 1b'1. This is a prepare patch, later patch will invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze mode acknowledge. Fixes: b1aa1c7a2165b ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze") Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-02-28net: hns3: fix bug when calculating the TCAM table infoJian Shen1-2/+2
The function hclge_fd_convert_tuple() is used to convert tuples and tuples mask to TCAM x and y. But it misuses the source mac as source mac mask when convert INNER_SRC_MAC, which may cause the flow director rule works unexpectedly. So fix it. Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: hns3: fix query vlan mask value error for flow directorJian Shen1-2/+1
Currently, the driver returns VLAN_VID_MASK for vlan mask field, when get flow director rule information for rule doesn't use vlan. It may cause the vlan mask value display as 0xf000 in this case, like below: estuary:/$ ethtool -u eth1 50 RX rings available Total 1 rules Filter: 2 Rule Type: TCP over IPv4 Src IP addr: 0.0.0.0 mask: 255.255.255.255 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff VLAN EtherType: 0x0 mask: 0xffff VLAN: 0x0 mask: 0xf000 User-defined: 0x1234 mask: 0x0 Action: Direct to queue 3 Fix it by return 0. Fixes: 05c2314fe6a8 ("net: hns3: Add support for rule query of flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: hns3: fix error mask definition of flow directorJian Shen1-3/+3
Currently, some bit filed definitions of flow director TCAM configuration command are incorrect. Since the wrong MSB is always 0, and these fields are assgined in order, so it still works. Fix it by redefine them. Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-28net: broadcom: bcm4908_enet: enable RX after processing packetsRafał Miłecki1-0/+3
When receiving a lot of packets hardware may run out of free descriptiors and stop RX ring. Enable it every time after handling received packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27bnxt_en: reliably allocate IRQ table on reset to avoid crashEdwin Peer1-2/+12
The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27bnxt_en: Fix race between firmware reset and driver remove.Vasundhara Volam1-0/+3
The driver's error recovery reset sequence can take many seconds to complete and only the critical sections are protected by rtnl_lock. A recent change has introduced a regression in this sequence. bnxt_remove_one() may be called while the recovery is in progress. Normally, unregister_netdev() would cause bnxt_close_nic() to be called and this would cause the error recovery to safely abort with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic(). Recently, we added bnxt_reinit_after_abort() to allow the user to reopen the device after an aborted recovery. This causes the regression in the scenario described above because we would attempt to re-open even after the netdev has been unregistered. Fix it by checking the netdev reg_state in bnxt_reinit_after_abort() and abort if it is unregistered. Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27mlxsw: spectrum_router: Ignore routes using a deleted nexthop objectIdo Schimmel1-0/+7
Routes are currently processed from a workqueue whereas nexthop objects are processed in system call context. This can result in the driver not finding a suitable nexthop group for a route and issuing a warning [1]. Fix this by ignoring such routes earlier in the process. The subsequent deletion notification will be ignored as well. [1] WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] [...] CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16 Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018 Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] Fixes: cdd6cfc54c64 ("mlxsw: spectrum_router: Allow programming routes with nexthop objects") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Alex Veber <alexve@nvidia.com> Tested-by: Alex Veber <alexve@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27mlxsw: spectrum_ethtool: Add an external speed to PTYS registerDanielle Ratson3-1/+8
Currently, only external bits are added to the PTYS register, whereas there is one external bit that is wrongly marked as internal, and so was recently removed from the register. Add that bit to the PTYS register again, as this bit is no longer internal. Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer being supported, causing a regression on some setups. Fixes: 5bf01b571cf4 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reported-by: Eddie Shklaer <eddies@nvidia.com> Tested-by: Eddie Shklaer <eddies@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: fec: ptp: avoid register access when ipg clock is disabledHeiko Thiery1-0/+7
When accessing the timecounter register on an i.MX8MQ the kernel hangs. This is only the case when the interface is down. This can be reproduced by reading with 'phc_ctrl eth0 get'. Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900 the igp clock is disabled when the interface is down and leads to a system hang. So we check if the ptp clock status before reading the timecounter register. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: phy: make mdio_bus_phy_suspend/resume as __maybe_unusedArnd Bergmann1-4/+2
When CONFIG_PM_SLEEP is disabled, the compiler warns about unused functions: drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function] static int mdio_bus_phy_suspend(struct device *dev) drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function] static int mdio_bus_phy_resume(struct device *dev) The logic is intentional, so just mark these two as __maybe_unused and remove the incorrect #ifdef. Fixes: 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: dsa: mt7530: don't build GPIO support if !GPIOLIBDENG Qingfang1-0/+4
The new GPIO support may be optional at runtime, but it requires building against gpiolib: ERROR: modpost: "gpiochip_get_data" [drivers/net/dsa/mt7530.ko] undefined! ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/net/dsa/mt7530.ko] undefined! Add #ifdef to exclude GPIO support if GPIOLIB is not enabled. Fixes: 429a0edeefd8 ("net: dsa: mt7530: MT7530 optional GPIO support") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: DENG Qingfang <dqfext@gmail.com> Link: https://lore.kernel.org/r/20210226063226.8474-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: mscc: ocelot: select NET_DEVLINKArnd Bergmann1-0/+1
Without this option, the driver fails to link: ld.lld: error: undefined symbol: devlink_sb_register >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a >>> referenced by ocelot_devlink.c >>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a Fixes: f59fd9cab730 ("net: mscc: ocelot: configure watermarks using devlink-sb") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210225143910.3964364-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: stmmac: re-init rx buffers when mac resume backJoakim Zhang1-1/+83
During suspend/resume stress test, we found descriptor write back by DMA could exhibit unusual behavior, e.g.: 003 [0xc4310030]: 0x0 0x40 0x0 0xb5010040 We can see that desc3 write back is 0xb5010040, it is still ownd by DMA, so application would not recycle this buffer. It will trigger fatal bus error when DMA try to use this descriptor again. To fix this issue, we should re-init all rx buffers when mac resume back. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: stmmac: fix wrongly set buffer2 valid when sph unsupportJoakim Zhang4-6/+15
In current driver, buffer2 available only when hardware supports split header. Wrongly set buffer2 valid in stmmac_rx_refill when refill buffer address. You can see that desc3 is 0x81000000 after initialization, but turn out to be 0x83000000 after refill. Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: stmmac: fix dma physical address of descriptor when display ringJoakim Zhang5-34/+94
Driver uses dma_alloc_coherent to allocate dma memory for descriptors, dma_alloc_coherent will return both the virtual address and physical address. AFAIK, virt_to_phys could not convert virtual address to physical address, for which memory is allocated by dma_alloc_coherent. dwmac4_display_ring() function is broken for various descriptor, it only support normal descriptor(struct dma_desc) now, this patch also extends to support all descriptor types. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: stmmac: fix watchdog timeout during suspend/resume stress testJoakim Zhang1-0/+2
stmmac_xmit() call stmmac_tx_timer_arm() at the end to modify tx timer to do the transmission cleanup work. Imagine such a situation, stmmac enters suspend immediately after tx timer modified, it's expire callback stmmac_tx_clean() would not be invoked. This could affect BQL, since netdev_tx_sent_queue() has been called, but netdev_tx_completed_queue() have not been involved, as a result, dql_avail(&dev_queue->dql) finally always return a negative value. __dev_queue_xmit->__dev_xmit_skb->qdisc_run->__qdisc_run->qdisc_restart->dequeue_skb: if ((q->flags & TCQ_F_ONETXQUEUE) && netif_xmit_frozen_or_stopped(txq)) // __QUEUE_STATE_STACK_XOFF is set Net core will stop transmitting any more. Finillay, net watchdong would timeout. To fix this issue, we should call netdev_tx_reset_queue() in stmmac_resume(). Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27net: stmmac: stop each tx channel independentlyJoakim Zhang1-4/+0
If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users may only want to stop specific tx channel. Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27Merge tag 'wireless-drivers-2021-02-26' of ↵Jakub Kicinski10-29/+37
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 First set of fixes for v5.12. One iwlwifi kernel crash fix and smaller fixes to multiple drivers. ath9k * fix Spatial Multiplexing Power Save (SMPS) handling to improve thoughtput mt76 * error handling fixes * memory leax fixes iwlwifi * don't crash during debug collection on DVM devices MAINTAINERS * email address update ath11k * fix GCC warning about DMA address debug messages * fix regression which broke QCA6390 AP mode * tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: mt76: mt7915: fix unused 'mode' variable mt76: dma: do not report truncated frames to mac80211 mt76: mt7921: remove incorrect error handling iwlwifi: pcie: fix iwl_so_trans_cfg link error when CONFIG_IWLMVM is disabled ath11k: fix AP mode for QCA6390 ath11k: qmi: use %pad to format dma_addr_t MAINTAINERS: update for mwifiex driver maintainers iwlwifi: avoid crash on unsupported debug collection mt76: mt7915: only modify tx buffer list after allocating tx token id mt76: fix tx skb error handling in mt76_dma_tx_queue_skb ath9k: fix transmitting to stations in dynamic SMPS mode ==================== Link: https://lore.kernel.org/r/20210226164411.CDD03C433CA@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26mt76: mt7915: fix unused 'mode' variableArnd Bergmann1-2/+2
clang points out a possible corner case in the mt7915_tm_set_tx_cont() function if called with invalid arguments: drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here rateval = mode << 6 | rate_idx; ^~~~ drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning u8 rate_idx = td->tx_rate_idx, mode; ^ Change it to return an error instead of continuing with invalid data here. Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2021-02-26mt76: dma: do not report truncated frames to mac80211Lorenzo Bianconi1-4/+7
Commit b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet") fixes a possible OOB access but it introduces a memory leak since the pending frame is not released to page_frag_cache if the frag array of skb_shared_info is full. Commit 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes the issue but does not free the truncated skb that is forwarded to mac80211 layer. Fix the leftover issue discarding even truncated skbs. Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org
2021-02-26mt76: mt7921: remove incorrect error handlingArnd Bergmann1-3/+1
Clang points out a mistake in the error handling in mt7921_mcu_tx_rate_report(), which tries to dereference a pointer that cannot be initialized because of the error that is being handled: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:409:3: warning: variable 'stats' is uninitialized when used here [-Wuninitialized] stats->tx_rate = rate; ^~~~~ drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:401:32: note: initialize the variable 'stats' to silence this warning struct mt7921_sta_stats *stats; ^ Just remove the obviously incorrect line. Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225145953.404859-2-arnd@kernel.org
2021-02-26iwlwifi: pcie: fix iwl_so_trans_cfg link error when CONFIG_IWLMVM is disabledKalle Valo1-1/+2
Randy reported an error on his randconfig builds: ERROR: modpost: "iwl_so_trans_cfg" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined! The problem was that when CONFIG_IWLMVM was disabled we were still accessing iwl_so_trans_cfg. Fix it by moving IS_ENABLED() check before the access. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 930be4e76f26 ("iwlwifi: add support for SnJ with Jf devices") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Luca Coelho <luciano.coelho@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614236661-20274-1-git-send-email-kvalo@codeaurora.org
2021-02-25Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+1
Pull virtio updates from Michael Tsirkin: - new vdpa features to allow creation and deletion of new devices - virtio-blk support per-device queue depth - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits) virtio-input: add multi-touch support virtio_mmio: fix one typo vdpa/mlx5: fix param validation in mlx5_vdpa_get_config() virtio_net: Fix fall-through warnings for Clang virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT. virtio-blk: support per-device queue depth virtio_vdpa: don't warn when fail to disable vq virtio-pci: introduce modern device module virito-pci-modern: rename map_capability() to vp_modern_map_capability() virtio-pci-modern: introduce helper to get notification offset virtio-pci-modern: introduce helper for getting queue nums virtio-pci-modern: introduce helper for setting/geting queue size virtio-pci-modern: introduce helper to set/get queue_enable virtio-pci-modern: introduce vp_modern_queue_address() virtio-pci-modern: introduce vp_modern_set_queue_vector() virtio-pci-modern: introduce vp_modern_generation() virtio-pci-modern: introduce helpers for setting and getting features virtio-pci-modern: introduce helpers for setting and getting status virtio-pci-modern: introduce helper to set config vector virtio-pci-modern: introduce vp_modern_remove() ...
2021-02-25Merge tag 'net-5.12-rc1' of ↵Linus Torvalds45-263/+489
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Rather small batch this time. Current release - regressions: - bcm63xx_enet: fix sporadic kernel panic due to queue length mis-accounting Current release - new code bugs: - bcm4908_enet: fix RX path possible mem leak - bcm4908_enet: fix NAPI poll returned value - stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe() - sched: cls_flower: validate ct_state for invalid and reply flags Previous releases - regressions: - net: introduce CAN specific pointer in the struct net_device to prevent mis-interpreting memory - phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 - psample: fix netlink skb length with tunnel info Previous releases - always broken: - icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending - wireguard: device: do not generate ICMP for non-IP packets - mptcp: provide subflow aware release function to avoid a mem leak - hsr: add support for EntryForgetTime - r8169: fix jumbo packet handling on RTL8168e - octeontx2-af: fix an off by one in rvu_dbg_qsize_write() - i40e: fix flow for IPv6 next header (extension header) - phy: icplus: call phy_restore_page() when phy_select_page() fails - dpaa_eth: fix the access method for the dpaa_napi_portal" * tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) r8169: fix jumbo packet handling on RTL8168e net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 net: psample: Fix netlink skb length with tunnel info net: broadcom: bcm4908_enet: fix NAPI poll returned value net: broadcom: bcm4908_enet: fix RX path possible mem leak net: hsr: add support for EntryForgetTime net: dsa: sja1105: Remove unneeded cast in sja1105_crc32() ibmvnic: fix a race between open and reset net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe() net: introduce CAN specific pointer in the struct net_device net: usb: qmi_wwan: support ZTE P685M modem wireguard: kconfig: use arm chacha even with no neon wireguard: queueing: get rid of per-peer ring buffers wireguard: device: do not generate ICMP for non-IP packets wireguard: peer: put frequently used members above cache lines wireguard: selftests: test multiple parallel streams wireguard: socket: remove bogus __be32 annotation wireguard: avoid double unlikely() notation when using IS_ERR() net: qrtr: Fix memory leak in qrtr_tun_open vxlan: move debug check after netdev unregister ...
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-25Merge tag 'pci-v5.12-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Remove unnecessary locking around _OSC (Bjorn Helgaas) - Clarify message about _OSC failure (Bjorn Helgaas) - Remove notification of PCIe bandwidth changes (Bjorn Helgaas) - Tidy checking of syscall user config accessors (Heiner Kallweit) Resource management: - Decline to resize resources if boot config must be preserved (Ard Biesheuvel) - Fix pci_register_io_range() memory leak (Geert Uytterhoeven) Error handling (Keith Busch): - Clear error status from the correct device - Retain error recovery status so drivers can use it after reset - Log the type of Port (Root or Switch Downstream) that we reset - Always request a reset for Downstream Ports in frozen state Endpoint framework and NTB (Kishon Vijay Abraham I): - Make *_get_first_free_bar() take into account 64 bit BAR - Add helper API to get the 'next' unreserved BAR - Make *_free_bar() return error codes on failure - Remove unused pci_epf_match_device() - Add support to associate secondary EPC with EPF - Add support in configfs to associate two EPCs with EPF - Add pci_epc_ops to map MSI IRQ - Add pci_epf_ops to expose function-specific attrs - Allow user to create sub-directory of 'EPF Device' directory - Implement ->msi_map_irq() ops for cadence - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence - Add EP function driver to provide NTB functionality - Add support for EPF PCI Non-Transparent Bridge - Add specification for PCI NTB function device - Add PCI endpoint NTB function user guide - Add configfs binding documentation for pci-ntb endpoint function Broadcom STB PCIe controller driver: - Add support for BCM4908 and external PERST# signal controller (Rafał Miłecki) Cadence PCIe controller driver: - Retrain Link to work around Gen2 training defect (Nadeem Athani) - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński) Freescale Layerscape PCIe controller driver: - Add LX2160A rev2 EP mode support (Hou Zhiqiang) - Convert to builtin_platform_driver() (Michael Walle) MediaTek PCIe controller driver: - Fix OF node reference leak (Krzysztof Wilczyński) Microchip PolarFlare PCIe controller driver: - Add Microchip PolarFire PCIe controller driver (Daire McNamara) Qualcomm PCIe controller driver: - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith) - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Drop PCIE_RCAR config option (Lad Prabhakar) - Always allocate MSI addresses in 32bit space (Marek Vasut) Rockchip PCIe controller driver: - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai) - Make 'ep-gpios' DT property optional (Chen-Yu Tsai) Synopsys DesignWare PCIe controller driver: - Work around ECRC configuration hardware defect (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Change size to u64 for EP outbound iATU (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Make dw_pcie ops optional (Jisheng Zhang) - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang) Xilinx Versal CPM PCIe controller driver: - Fix OF node reference leak (Pan Bian) Miscellaneous: - Remove tango host controller driver (Arnd Bergmann) - Remove IRQ handler & data together (altera-msi, brcmstb, dwc) (Martin Kaiser) - Fix xgene-msi race in installing chained IRQ handler (Martin Kaiser) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Fix pci-bridge-emul array overruns (Russell King) - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)" * tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits) PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250 PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings PCI: dwc: Work around ECRC configuration issue PCI/portdrv: Report reset for frozen channel PCI/AER: Specify the type of Port that was reset PCI/ERR: Retain status from error notification PCI/AER: Clear AER status from Root Port when resetting Downstream Port PCI/ERR: Clear status of the reporting device dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional Documentation: PCI: Add PCI endpoint NTB function user guide ...
2021-02-25r8169: fix jumbo packet handling on RTL8168eHeiner Kallweit1-2/+2
Josef reported [0] that using jumbo packets fails on RTL8168e. Aligning the values for register MaxTxPacketSize with the vendor driver fixes the problem. [0] https://bugzilla.kernel.org/show_bug.cgi?id=211827 Fixes: d58d46b5d851 ("r8169: jumbo fixes.") Reported-by: Josef Oškera <joskera@redhat.com> Tested-by: Josef Oškera <joskera@redhat.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b15ddef7-0d50-4320-18f4-6a3f86fbfd3e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081Christian Melki1-0/+1
Following a similar reinstate for the KSZ9031. Older kernels would use the genphy_soft_reset if the PHY did not implement a .soft_reset. Bluntly removing that default may expose a lot of situations where various PHYs/board implementations won't recover on various changes. Like with this implementation during a 4.9.x to 5.4.x LTS transition. I think it's a good thing to remove unwanted soft resets but wonder if it did open a can of worms? Atleast this fixes one iMX6 FEC/RMII/8081 combo. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Christian Melki <christian.melki@t2data.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: broadcom: bcm4908_enet: fix NAPI poll returned valueRafał Miłecki1-0/+2
Missing increment was resulting in poll function always returning 0 instead of amount of processed packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: broadcom: bcm4908_enet: fix RX path possible mem leakRafał Miłecki1-0/+1
After filling RX ring slot with new skb it's required to free old skb. Immediately on error or later in the net subsystem. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()Geert Uytterhoeven1-1/+1
sja1105_unpack() takes a "const void *buf" as its first parameter, so there is no need to cast away the "const" of the "buf" variable before calling it. Drop the cast, as it prevents the compiler performing some checks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210223112003.2223332-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25ibmvnic: fix a race between open and resetSukadev Bhattiprolu1-8/+55
__ibmvnic_reset() currently reads the adapter->state before getting the rtnl and saves that state as the "target state" for the reset. If this read occurs when adapter is in PROBED state, the target state would be PROBED. Just after the target state is saved, and before the actual reset process is started (i.e before rtnl is acquired) if we get an ibmvnic_open() call we would move the adapter to OPEN state. But when the reset is processed (after ibmvnic_open()) drops the rtnl), it will leave the adapter in PROBED state even though we already moved it to OPEN. To fix this, use the RTNL to improve serialization when reading/updating the adapter state. i.e determine the target state of a reset only after getting the RTNL. And if a reset is in progress during an open, simply set the target state of the adapter and let the reset code finish the open (like we currently do if failover is pending). One twist to this serialization is if the adapter state changes when we drop the RTNL to update the link state. Account for this by checking if there was an intervening open and update the target state for the reset accordingly (see new comments in the code). Note that only the reset functions and ibmvnic_open() can set the adapter to OPEN state and this must happen under rtnl. Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20210224050229.1155468-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20210223104803.4047281-1-weiyongjun1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 01:35:18 +0300