summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-07-31net: Use skb_frag_off accessorsJonathan Lemon23-42/+42
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Add PCI IDs for 57500 series NPAR devices.Michael Chan1-0/+12
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Support all variants of the 5750X chip family.Michael Chan1-2/+6
Define the 57508, 57504, and 57502 chip IDs that are all part of the BNXT_CHIP_P5 family of chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.Michael Chan2-53/+67
With the new TPA feature in the 57500 chips, we need to discover the feature first before setting up the netdev features. Refactor the the firmware probe and init logic more cleanly into 2 functions and and make these calls before setting up the netdev features. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Support TPA counters on 57500 chips.Michael Chan1-10/+31
Support the new expanded TPA v2 counters on 57500 B0 chips for ethtool -S. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Allocate the larger per-ring statistics block for 57500 chips.Michael Chan2-2/+9
The new TPA implemantation has additional TPA counters that extend the per-ring statistics block. Allocate the proper size accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Refactor ethtool ring statistics logic.Michael Chan1-50/+70
The current code assumes that the per ring statistics counters are fixed. In newer chips that support a newer version of TPA, the TPA counters are also changed. Refactor the code by defining these counter names in arrays so that it is easy to add a new array for a new set of counters supported by the newer chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Add hardware GRO setup function for 57500 chips.Michael Chan1-1/+32
Add a more optimized hardware GRO function to setup the SKB on 57500 chips. Some workaround code is no longer needed on 57500 chips and the pseudo checksum is also calculated in hardware, so no need to do the software pseudo checksum in the driver. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Add TPA ID mapping logic for 57500 chips.Michael Chan2-2/+53
The new TPA feature on 57500 supports a larger number of concurrent TPAs (up to 1024) divided among the functions. We need to add some logic to map the hardware TPA ID to a software index that keeps track of each TPA in progress. A 1:1 direct mapping without translation would be too wasteful as we would have to allocate 1024 TPA structures for each RX ring on each PCI function. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Add fast path logic for TPA on 57500 chips.Michael Chan1-25/+75
With all the previous refactoring, the TPA fast path can now be modified slightly to support TPA on the new chips. The main difference is that the agg completions are retrieved differently using the bnxt_get_tpa_agg_p5() function on the new chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Set TPA GRO mode flags on 57500 chips properly.Michael Chan1-3/+5
On 57500 chips, hardware GRO mode cannot be determined from the TPA end, so we need to check bp->flags to determine if we are in hardware GRO mode or not. Modify bnxt_set_features so that the TPA flags in bp->flags don't change until the device is closed. This will ensure that the fast path can safely rely on bp->flags to determine the TPA mode. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Refactor tunneled hardware GRO logic.Michael Chan1-41/+28
The 2 GRO functions to set up the hardware GRO SKB fields for 2 different hardware chips have practically identical logic for tunneled packets. Refactor the logic into a separate bnxt_gro_tunnel() function that can be used by both functions. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Handle standalone RX_AGG completions.Michael Chan1-2/+18
On the new 57500 chips, these new RX_AGG completions are not coalesced at the TPA_END completion. Handle these by storing them in the array in the bnxt_tpa_info struct, as they are seen when processing the CMPL ring. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.Michael Chan2-6/+41
Add an aggregation array to bnxt_tpa_info struct to keep track of the aggregation completions. The aggregation completions are not completed at the TPA_END completion on 57500 chips so we need to keep track of them. The array is only allocated on the new chips when required. An agg_count field is also added to keep track of the number of these completions. The maximum concurrent TPA is now discovered from firmware instead of the hardcoded 64. Add a new bp->max_tpa to keep track of maximum configured TPA. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Refactor TPA logic.Michael Chan1-48/+69
Refactor the TPA logic slightly, so that the code can be more easily extended to support TPA on the new 57500 chips. In particular, the logic to get the next aggregation completion is refactored into a new function bnxt_get_agg() so that this operation is made more generalized. This operation will be different on the new chip in TPA mode. The logic to recycle the aggregation buffers has a new start index parameter added for the same purpose. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Add TPA structure definitions for BCM57500 chips.Michael Chan1-0/+67
The new chips have a slightly modified TPA interface for LRO/GRO_HW. Modify the TPA structures so that the same structures can also be used on the new chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30bnxt_en: Update firmware interface spec. to 1.10.0.89.Michael Chan2-16/+108
Among the changes are new CoS discard counters and new ctx_hw_stats_ext struct for the latest 5750X B0 chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: dsa: mv88e6xxx: avoid some redundant vtu load/purge operationsRasmus Villemoes1-1/+3
We have an ERPS (Ethernet Ring Protection Switching) setup involving mv88e6250 switches which we're in the process of switching to a BSP based on the mainline driver. Breaking any link in the ring works as expected, with the ring reconfiguring itself quickly and traffic continuing with almost no noticable drops. However, when plugging back the cable, we see 5+ second stalls. This has been tracked down to the userspace application in charge of the protocol missing a few CCM messages on the good link (the one that was not unplugged), causing it to broadcast a "signal fail". That message eventually reaches its link partner, which responds by blocking the port. Meanwhile, the first node has continued to block the port with the just plugged-in cable, breaking the network. And the reason for those missing CCM messages has in turn been tracked down to the VTU apparently being too busy servicing load/purge operations that the normal lookups are delayed. Initial state, the link between C and D is blocked in software. _____________________ / \ | | A ----- B ----- C *---- D Unplug the cable between C and D. _____________________ / \ | | A ----- B ----- C * * D Reestablish the link between C and D. _____________________ / \ | | A ----- B ----- C *---- D Somehow, enough VTU/ATU operations happen inside C that prevents the application from receving the CCM messages from B in a timely manner, so a Signal Fail message is sent by C. When B receives that, it responds by blocking its port. _____________________ / \ | | A ----- B *---* C *---- D Very shortly after this, the signal fail condition clears on the BC link (some CCM messages finally make it through), so C unblocks the port. However, a guard timer inside B prevents it from removing the blocking before 5 seconds have elapsed. It is not unlikely that our userspace ERPS implementation could be smarter and/or is simply buggy. However, this patch fixes the symptoms we see, and is a small optimization that should not break anything (knock wood). The idea is simply to avoid doing an VTU load of an entry identical to the one already present. To do that, we need to know whether mv88e6xxx_vtu_get() actually found an existing entry, or has just prepared a struct mv88e6xxx_vtu_entry for us to load. To that end, let vlan->valid be an output parameter. The other two callers of mv88e6xxx_vtu_get() are not affected by this patch since they pass new=false. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29r8169: make use of xmit_moreHeiner Kallweit1-5/+12
There was a previous attempt to use xmit_more, but the change had to be reverted because under load sometimes a transmit timeout occurred [0]. Maybe this was caused by a missing memory barrier, the new attempt keeps the memory barrier before the call to netif_stop_queue like it is used by the driver as of today. The new attempt also changes the order of some calls as suggested by Eric. [0] https://lkml.org/lkml/2019/2/10/39 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: ag71xx: use resource_size for the ioremap sizeDing Xiang1-1/+1
use resource_size to calcuate ioremap size and make the code simpler. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: use dev_info() instead of pr_info()Huazhong Tan2-2/+5
dev_info() is more appropriate for printing messages when driver initialization done, so switch to dev_info(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: Add support for using order 1 pages with a 4K bufferYunsheng Lin2-8/+17
Hardware supports 0.5K, 1K, 2K, 4K RX buffer size, the RX buffer can not be reused because the hns3_page_order return 0 when page size and RX buffer size are both 4096. So this patch changes the hns3_page_order to return 1 when RX buffer is greater than half of the page size and page size is less the 8192, and dev_alloc_pages has already been used to allocate the compound page for RX buffer. This patch also changes hnae3_* to hns3_* for page order and RX buffer size calculation because they are used in hns3 module. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: add interrupt affinity support for misc interruptYunsheng Lin2-4/+53
The misc interrupt is used to schedule the reset and mailbox subtask, and service_task delayed_work is used to do periodic management work each second. This patch sets the above three subtask's affinity using the misc interrupt' affinity. Also this patch setups a affinity notify for misc interrupt to allow user to change the above three subtask's affinity. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: make hclge_service use delayed workqueueYunsheng Lin2-34/+21
Use delayed work instead of using timers to trigger the hclge_serive. Simplify the code with one less middle function and in order to support misc irq affinity. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: add debug messages to identify eth down causeYonglong Liu3-0/+48
Some times just see the eth interface have been down/up via dmesg, but can not know why the eth down. So adds some debug messages to identify the cause for this. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: modify firmware version display formatYufeng Mo4-4/+40
This patch modifies firmware version display format in hclge(vf)_cmd_init() and hns3_get_drvinfo(). Also, adds some optimizations for firmware version display format. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: change GFP flag during lock periodYufeng Mo1-1/+1
When allocating memory, the GFP_KERNEL cannot be used during the spin_lock period. This is because it may cause scheduling when holding spin_lock. This patch changes GFP flag to GFP_ATOMIC in this case. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: lipeng 00277521 <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: remove upgrade reset level when reset failHuazhong Tan1-20/+8
Currently, hclge_reset_err_handle() will assert a global reset when the failing count is smaller than MAX_RESET_FAIL_CNT, which will affect other running functions. So this patch removes this upgrading, and uses re-scheduling reset task to do it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: add a check for get_reset_levelGuangbin Huang1-1/+1
For some cases, ops->get_reset_level may not be implemented, so we should check whether it is NULL before calling get_reset_level. Signed-off-by: Guangbin Huang <huangguangbin@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hns3: add reset checking before set channelsJian Shen1-0/+3
hns3_set_channels() should check the resetting status firstly, since the device will reinitialize when resetting. If the reset has not completed, the hns3_set_channels() may access invalid memory. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28mlxsw: spectrum_flower: Forbid to offload match on reserved TCP flags bitsJiri Pirko1-0/+6
Matching on reserved TCP flags bits is only supported using custom parser. Since the usecase for that is not known now, just forbid to offload rules that match on these bits. Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28mlxsw: spectrum_acl: Track rules that forbid egress block bindJiri Pirko4-7/+30
Some matches and actions are not supported on egress. Track such rules and forbid a bind of block which contains them to egress. With this patch, the kernel tells the user he cannot do that: $ tc qdisc add dev ens16np1 ingress_block 22 clsact $ tc filter add block 22 protocol 802.1q pref 2 handle 101 flower vlan_id 100 skip_sw action pass $ tc qdisc add dev ens16np2 egress_block 22 clsact Error: mlxsw_spectrum: Block cannot be bound to egress because it contains unsupported rules. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28mlxsw: spectrum_flower: Forbid to offload mirred redirect on egressJiri Pirko1-0/+5
Spectrum ASIC does not support redirection on egress, so refuse to insert such flows: $ tc qdisc add dev ens16np1 clsact $ tc filter add dev ens16np1 egress protocol all pref 1 handle 101 flower skip_sw action mirred egress redirect dev ens16np2 Error: mlxsw_spectrum: Redirect action is not supported on egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28r8169: enable HW csum and TSOHeiner Kallweit1-5/+11
Enable HW csum and TSO per default except on known buggy chip versions. Realtek confirmed that RTL8168evl has a HW issue with TSO. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28r8169: remove r8169_csum_workaroundHeiner Kallweit1-37/+2
The loop in r8169_csum_workaround is called only if in msdn_giant_send_check a copy of the skb header needs to be made and we don't have enough memory. Let's simply drop the packet in that case so that we can remove r8169_csum_workaround. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28r8169: implement callback ndo_features_checkHeiner Kallweit1-24/+36
Implement callback ndo_features_check and move all feature checks there. This will allow us to get rid of r8169_csum_workaround() completely in a subsequent step. Like in the vendor driver disable HW csum for short packets on RTL8168b. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28r8169: set GSO size and segment limitsHeiner Kallweit1-1/+12
Set GSO max size and max segment number as in the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28r8169: align setting PME with vendor driverHeiner Kallweit1-2/+6
Align setting PME with the vendor driver. PMEnable is writable on RTL8169 only, on later chip versions it's read-only. PME_SIGNAL is used on chip versions from RTL8168evl with the exception of the RTL8168f family. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28mlx4/en_netdev: allow offloading VXLAN over VLANDavide Caratti1-26/+17
ConnectX-3 Pro can offload transmission of VLAN packets with VXLAN inside: enable tunnel offloads in dev->vlan_features, like it's done with other NIC drivers (e.g. be2net and ixgbe). It's no more necessary to change dev->hw_enc_features when VXLAN are added or removed, since .ndo_features_check() already checks for VXLAN packet where the UDP destination port matches the configured value. Just set dev->hw_enc_features when the NIC is initialized, so that overlying VLAN can correctly inherit the tunnel offload capabilities. Changes since v1: - avoid flipping hw_enc_features, instead of calling netdev notifiers, thanks to Saeed Mahameed - squash two patches into a single one CC: Paolo Abeni <pabeni@redhat.com> CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-28drivers: net: xgene: Move status variable declaration into CONFIG_ACPI blockNathan Chancellor3-3/+6
When CONFIG_ACPI is unset (arm allyesconfig), status is unused. drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:383:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ drivers/net/ethernet/apm/xgene/xgene_enet_sgmac.c:440:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:697:14: warning: unused variable 'status' [-Wunused-variable] acpi_status status; ^ Move the declaration into the CONFIG_ACPI block so that there are no compiler warnings. Fixes: 570d785ba46b ("drivers: net: xgene: Remove acpi_has_method() calls") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27net: stmmac: Do not request stmmaceth clockThierry Reding1-6/+8
The stmmaceth clock is specified by the slave_bus and apb_pclk clocks in the device tree bindings for snps,dwc-qos-ethernet-4.10 compatible nodes of this IP. The subdrivers for these bindings will be requesting the stmmac clock correctly at a later point, so there is no need to request it here and cause an error message to be printed to the kernel log. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27net: stmmac: Make MDIO bus reset optionalThierry Reding4-2/+14
The Tegra EQOS driver already resets the MDIO bus at probe time via the reset GPIO specified in the phy-reset-gpios device tree property. There is no need to reset the bus again later on. This avoids the need to query the device tree for the snps,reset GPIO, which is not part of the Tegra EQOS device tree bindings. This quiesces an error message from the generic bus reset code if it doesn't find the snps,reset related delays. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27sis900: add support for ethtool's EEPROM dumpSergej Benilov1-0/+68
Implement ethtool's EEPROM dump command (ethtool -e|--eeprom-dump). Thx to Andrew Lunn for comments. Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26net: mvneta: use devm_platform_ioremap_resource() to simplify codeJisheng Zhang1-3/+1
devm_platform_ioremap_resource() wraps platform_get_resource() and devm_ioremap_resource() in a single helper, let's use that helper to simplify the code. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25mlxsw: spectrum_router: Increase scale of IPv6 nexthop groupsIdo Schimmel1-2/+2
Unlike IPv4, the kernel does not consolidate IPv6 nexthop groups. To avoid exhausting the device's adjacency table - where nexthops are stored - the driver does this consolidation instead. Each nexthop group is hashed by XOR-ing the interface indexes of all the member nexthop devices. However, the ifindex itself is not hashed, which can result in identical keys used for different groups and finally an -EBUSY error from rhashtable due to too long objects list. Improve the situation by hashing the ifindex itself. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25mlxsw: spectrum: Expose KVD size for Spectrum-2Amit Cohen1-1/+21
Unlike Spectrum-1, the KVD (Key-value database) of Spectrum-2 is not partitioned, so only expose the entire KVD size. This enables users to query the total size of the KVD. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25net: sfc: falcon: convert to i2c_new_dummy_deviceWolfram Sang1-7/+7
Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25mlx4: avoid large stack usage in mlx4_init_hca()Arnd Bergmann1-27/+39
The mlx4_dev_cap and mlx4_init_hca_param are really too large to be put on the kernel stack, as shown by this clang warning: drivers/net/ethernet/mellanox/mlx4/main.c:3304:12: error: stack frame size of 1088 bytes in function 'mlx4_load_one' [-Werror,-Wframe-larger-than=] With gcc, the problem is the same, but it does not warn because it does not inline this function, and therefore stays just below the warning limit, while clang is just above it. Use kzalloc for dynamic allocation instead of putting them on stack. This gets the combined stack frame down to 424 bytes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25qed: reduce maximum stack frame sizeArnd Bergmann1-19/+15
clang warns about an overly large stack frame in one function when it decides to inline all __qed_get_vport_*() functions into __qed_get_vport_stats(): drivers/net/ethernet/qlogic/qed/qed_l2.c:1889:13: error: stack frame size of 1128 bytes in function '_qed_get_vport_stats' [-Werror,-Wframe-larger-than=] Use a noinline_for_stack annotation to prevent clang from inlining these, which keeps the maximum stack usage at around half of that in the worst case, similar to what we get with gcc. Fixes: 86622ee75312 ("qed: Move statistics to L2 code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25r8169: improve rtl_set_rx_modeHeiner Kallweit1-30/+22
This patch improves and simplifies rtl_set_rx_mode a little. No functional change intended. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 11:52:38 +0300