summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-06-01ath9k: Further fix for mesh beaconingFabrice Deyber1-12/+3
This fix ensure the timers to be set at beacon interval boundaries. Without this change timers can be set improperly resulting in the absence of beacons. Signed-off-by: Fabrice Deyber <fabricedeyber@agilemesh.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: wake up chip before initializing PAPRD tableMohammed Shafi Shajakhan1-3/+4
In PAPRD table initialization path we do some register read, so make sure the chip is awake during that. Currently PAPRD is disabled. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtlwifi: rtl8192se: Synchronize IRQ after disabling itLarry Finger1-0/+1
As suggested by Mike McCormack <mikem@ring3k.org> for rtl8192ce, make sure any IRQ handlers running on other CPUs complete. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtlwifi: rtl8192se: Use write barrier when assigning ownershipLarry Finger1-0/+4
As noted by Mike McCormack <mikem@ring3k.org> for rtl8192ce, make sure all updates to a descriptor are flushed to memory before assigning ownship to hardware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01mwifiex: remove support for old chipsets W0/W1Amitkumar Karwar4-32/+7
For SD8787 A0/A1 chipsets we use the default firmware image file 'mrvl/sd8787_uapsta.bin'. So the chip rev id variable is removed. The global variable fw_name is moved to adapter structure so that we can support a different interface, such as PCIe, in future. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43legacy: Fix warnings from gcc 4.6.0Larry Finger3-16/+4
gcc 4.6.0 warnings for b43legacy: CC [M] drivers/net/wireless/b43legacy/main.o drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_request_firmware’: drivers/net/wireless/b43legacy/main.c:1567:6: warning: variable ‘tmshigh’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2637:6: warning: variable ‘antenna_rx’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_bss_info_changed’: drivers/net/wireless/b43legacy/main.c:2778:24: warning: variable ‘phy’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/xmit.c: In function ‘generate_txhdr_fw3’: drivers/net/wireless/b43legacy/xmit.c:324:7: warning: variable ‘rts_rate_ofdm’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/b43legacy/dma.o drivers/net/wireless/b43legacy/dma.c: In function ‘free_all_descbuffers’: drivers/net/wireless/b43legacy/dma.c:820:36: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/dma.c: In function ‘b43legacy_dma_tx’: drivers/net/wireless/b43legacy/dma.c:1377:28: warning: variable ‘info’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/dma.c:1374:24: warning: variable ‘hdr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43legacy/dma.c: In function ‘b43legacy_dma_handle_txstatus’: drivers/net/wireless/b43legacy/dma.c:1438:36: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtl8192se: Fix warnings from gcc 4.6.0Larry Finger5-19/+5
gcc 4.6.0 warnings for rtl8192se: CC [M] drivers/net/wireless/rtlwifi/rtl8192se/dm.o drivers/net/wireless/rtlwifi/rtl8192se/dm.c: In function ‘_rtl92s_dm_refresh_rateadaptive_mask’: drivers/net/wireless/rtlwifi/rtl8192se/dm.c:225:5: warning: variable ‘rssi_level’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192se/fw.o drivers/net/wireless/rtlwifi/rtl8192se/fw.c: In function ‘rtl92s_download_fw’: drivers/net/wireless/rtlwifi/rtl8192se/fw.c:361:6: warning: variable ‘file_length’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192se/hw.o drivers/net/wireless/rtlwifi/rtl8192se/hw.c: In function ‘_rtl92se_hw_configure’: drivers/net/wireless/rtlwifi/rtl8192se/hw.c:887:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8192se/hw.c: In function ‘_rtl92se_set_media_status’: drivers/net/wireless/rtlwifi/rtl8192se/hw.c:1125:20: warning: variable ‘ledaction’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8192se/hw.c: In function ‘rtl92se_gpio_radio_on_off_checking’: drivers/net/wireless/rtlwifi/rtl8192se/hw.c:2274:32: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192se/phy.o drivers/net/wireless/rtlwifi/rtl8192se/phy.c: In function ‘rtl92s_phy_set_bw_mode’: drivers/net/wireless/rtlwifi/rtl8192se/phy.c:266:5: warning: variable ‘reg_prsr_rsc’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192se/trx.o drivers/net/wireless/rtlwifi/rtl8192se/trx.c: In function ‘_rtl92se_translate_rx_signal_stuff’: drivers/net/wireless/rtlwifi/rtl8192se/trx.c:584:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtl8192cu: Fix warnings from gcc 4.6.0Larry Finger1-2/+0
gcc 4.6.0 warnings for rtl8192cu: CC [M] drivers/net/wireless/rtlwifi/rtl8192cu/mac.o drivers/net/wireless/rtlwifi/rtl8192cu/mac.c: In function ‘rtl92c_translate_rx_signal_stuff’: drivers/net/wireless/rtlwifi/rtl8192cu/mac.c:1116:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtl8192ce: Fix warnings from gcc 4.6.0Larry Finger3-10/+2
gcc 4.6.0 warnings for rtl8192ce: CC [M] drivers/net/wireless/rtlwifi/rtl8192ce/hw.o drivers/net/wireless/rtlwifi/rtl8192ce/hw.c: In function ‘_rtl92ce_hw_configure’: drivers/net/wireless/rtlwifi/rtl8192ce/hw.c:766:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8192ce/hw.c: In function ‘rtl92ce_gpio_radio_on_off_checking’: drivers/net/wireless/rtlwifi/rtl8192ce/hw.c:1972:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192ce/phy.o drivers/net/wireless/rtlwifi/rtl8192ce/phy.c: In function ‘rtl92c_phy_config_rf_with_headerfile’: drivers/net/wireless/rtlwifi/rtl8192ce/phy.c:284:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192ce/trx.o drivers/net/wireless/rtlwifi/rtl8192ce/trx.c: In function ‘_rtl92ce_translate_rx_signal_stuff’: drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:595:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtl8192c-common: Fix warnings from gcc 4.6.0Larry Finger2-11/+3
gcc 4.6.0 warnings for rtl8192c-common: CC [M] drivers/net/wireless/rtlwifi/rtl8192c/fw_common.o drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c: In function ‘_rtl92c_cmd_send_packet’: drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:549:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/rtl8192c/phy_common.o drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c: In function ‘_rtl92c_phy_iq_calibrate’: drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:1256:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c: In function ‘rtl92c_phy_iq_calibrate’: drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:1766:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:1765:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rtlwifi: Fix warnings from gcc 4.6.0Larry Finger4-29/+2
gcc 4.6.0 warnings for rtlwifi: CC [M] drivers/net/wireless/rtlwifi/base.o drivers/net/wireless/rtlwifi/base.c: In function ‘rtl_tx_agg_stop’: drivers/net/wireless/rtlwifi/base.c:891:23: warning: variable ‘tid_data’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/base.c: In function ‘rtl_tx_agg_oper’: drivers/net/wireless/rtlwifi/base.c:921:23: warning: variable ‘tid_data’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/efuse.o drivers/net/wireless/rtlwifi/efuse.c: In function ‘efuse_pg_packet_write’: drivers/net/wireless/rtlwifi/efuse.c:928:24: warning: variable ‘dataempty’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/efuse.c: In function ‘efuse_get_current_size’: drivers/net/wireless/rtlwifi/efuse.c:1179:5: warning: variable ‘hoffset’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/ps.o drivers/net/wireless/rtlwifi/ps.c: In function ‘rtl_ps_set_rf_state’: drivers/net/wireless/rtlwifi/ps.c:85:19: warning: variable ‘rtstate’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/regd.o drivers/net/wireless/rtlwifi/regd.c: In function ‘_rtl_dump_channel_map’: drivers/net/wireless/rtlwifi/regd.c:310:28: warning: variable ‘ch’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/rtlwifi/usb.o drivers/net/wireless/rtlwifi/usb.c: In function ‘_rtl_usb_transmit’: drivers/net/wireless/rtlwifi/usb.c:826:21: warning: variable ‘urb_list’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/usb.c:825:23: warning: variable ‘skb_list’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: Fix warnings from gcc 4.6.0Larry Finger2-6/+4
gcc 4.6.0 warnings for b43: CC [M] drivers/net/wireless/b43/lo.o drivers/net/wireless/b43/lo.c: In function ‘lo_measure_gain_values’: drivers/net/wireless/b43/lo.c:304:7: warning: variable ‘trsw_rx’ set but not used [-Wunused-but-set-variable] CC [M] drivers/net/wireless/b43/dma.o drivers/net/wireless/b43/dma.c: In function ‘free_all_descbuffers’: drivers/net/wireless/b43/dma.c:760:30: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/b43/dma.c: In function ‘b43_dma_handle_txstatus’: drivers/net/wireless/b43/dma.c:1391:30: warning: variable ‘desc’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: Handle IBSS status changes in BSS_CHANGED_IBSSRajkumar Manoharan1-41/+44
Configure ibss node's bss_changes under BSS_CHANGED_IBSS. And also start/stop ani timer only if the station join/leave the group. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: Remove ATH9K_BEACON_PERIOD maskRajkumar Manoharan4-11/+10
Earlier beacon_interval is used to hold interval value and some flags (ATH9K_BEACON_ENA &ATH9K_BEACON_PERIOD). So to extract interval ATH9K_BEACON_PERIOD is used. Those flags were completely removed. So masking beacon_interval is not required. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: add helpers for checking host typeRafał Miłecki2-6/+17
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: use new pointers path to access ssb_device in SSB specific placesRafał Miłecki1-11/+17
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: SDIO: use new pointers path to access ssb_deviceRafał Miłecki1-2/+2
SDIO code is SSB specific, we can safely just use "sdev" Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: LP-PHY: use new pointers path to access ssb_deviceRafał Miłecki1-5/+10
LP-PHY code is SSB specific, add check for bus type. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: mark few functions as staticMohammed Shafi Shajakhan2-6/+3
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: make ath9k_setpower function as staticMohammed Shafi Shajakhan2-2/+1
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k_hw: remove ath9k_hw_get_desc_linkFelix Fietkau4-20/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: unify edma and non-edma tx code, improve tx fifo handlingFelix Fietkau4-206/+138
EDMA based chips (AR9380+) have 8 Tx FIFO slots, which are used to fix the tx queue start/stop race conditions which have to be worked around for earlier chips by keeping the last descriptor in the queue. The current code stores all frames that do not fit onto the 8 FIFO slots in a separate list. Whenever a FIFO slot is freed up, the next frame (or A-MPDU) from the pending queue gets moved to that slot. This process is not only inefficient, but also unnecessary. The code can be improved visibly by keeping the pending queue fully linked, and moving the contents of the entire queue to a FIFO slot as it becomes available. This patch makes the necessary changes for that and also merges some code that was duplicated for EDMA vs non-EDMA. It changes txq->axq_link to point to the last descriptor instead of the link pointer, so that ath9k_hw_set_desc_link can be used, which works on all chips. With this patch, a small performance increase for non-aggregated traffic was observed on AR9380 based embedded hardware. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: remove redundant if checkMohammed Shafi Shajakhan1-17/+12
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01mac80211_hwsim driver support userspace frame tx/rxJavier Lopez2-15/+580
This patch adds to mac80211_hwsim the capability to send traffic via userspace. Frame exchange between kernel and user spaces is done through generic netlink communication protocol. A new generic netlink family MAC80211_HWSIM is proposed, this family contains three basic commands HWSIM_CMD_REGISTER, which is the command used to register a new traffic listener, HWSIM_CMD_FRAME, to exchange the frames from kernel to user and vice-versa, and HWSIM_CMD_TX_INFO_FRAME which returns from user all the information about retransmissions, rates, rx signal, and so on. How it works: Once the driver is loaded the MAC80211_HWSIM family will be registered. In the absence of userspace daemon, the driver itselfs implements a perfect wireless medium as it did in the past. When a daemon sends a HWSIM_CMD_REGISTER command, the module stores the application PID, and from this moment all frames will be sent to the registered daemon. The user space application will be in charge of process/forward all frames broadcast by any mac80211_hwsim radio. If the user application is stopped, the kernel module will detect the release of the socket and it will switch back to in-kernel perfect channel simulation. The userspace daemon must be waiting for incoming HWSIM_CMD_FRAME commands sent from kernel, for each HWSIM_CMD_FRAME command the application will try to broadcast this frame to all mac80211_hwsim radios, however the application may decide to forward/drop this frame. In the case of forwarding the frame, a new HWSIM_CMD_FRAME command will be created, all necessary attributes will be populated and the frame will be sent back to the kernel. Also after the frame broadcast phase, a HWSIM_CMD_TX_INFO_FRAME command will be sent from userspace to kernel, this command contains all the information regarding the transmission, such as number of tries, rates, ack signal, etc. You can find the actual implementation of wireless mediumd daemon (wmediumd) at: * Last version tarball: https://github.com/jlopex/cozybit/tarball/master * Or visiting my github tree: https://github.com/jlopex/cozybit/tree Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Enabled rt35xx device support by default.Gertjan van Wingerde1-7/+2
Now that support for these devices has been added we can enable them by default and remove the Kconfig not on support for these devices to be non-functional. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Move rt2800_txdone and rt2800_txdone_entry_check to rt2800usb.Gertjan van Wingerde3-84/+82
These two functions are only used by rt2800usb so they don't have to be in rt2800lib. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Interface sequence lock doesn't have to disable interrupts.Gertjan van Wingerde1-3/+2
This lock is only used in the TX path and thus in process context. Therefore we can use a much lighter spinlock variant. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Add support for RT3572/RT3592/RT3592+Bluetooth combo cardGertjan van Wingerde3-7/+295
(based on an earlier patch submitted by Shiang) Add support for RT3572/RT3592/RT3592+Bluetooth combo card Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Don't disable G0 PA_PE bit in case of BT coexistence.Gertjan van Wingerde1-1/+5
(split off from the earlier RT35xx patch submitted by Shiang) Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Enable PA_PE bits in TX_PIN_CFG according to active band.Gertjan van Wingerde1-2/+4
(split off from the earlier RT35xx patch submitted by Shiang) There's no point in enabling the PA_PE bits for the bands that we are not active on. Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract bus and core operationsRafał Miłecki5-16/+77
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract board infoRafał Miłecki9-57/+54
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract chip infoRafał Miłecki6-25/+28
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract device structs and irqRafał Miłecki6-22/+30
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract SPROMRafał Miłecki12-99/+107
SPROM is another frequently used struct. We decided to share SPROM struct between ssb na bcma as long as we will not need any hacks. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract 80211 core infoRafał Miłecki7-25/+31
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: bus: abstract R/W operationsRafał Miłecki3-6/+53
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: add bus device abstraction layerRafał Miłecki5-14/+74
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: rename ssb_device variable in ssb specific functionsRafał Miłecki1-14/+15
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27Merge ↵John W. Linville12-24/+61
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-27ath9k: Fix AR9287 calibrationAdrian Chadd1-1/+1
The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27wireless: Default to 'n' for 2 new added devices in Kconfig.Tao Ma2-2/+0
We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27iwl4965: fix 5GHz operationStanislaw Gruszka1-2/+2
rx_status.band is used uninitialized, what disallow to work on 5GHz . Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: set 40 Mhz rate only if hw is configured in ht40Rajkumar Manoharan1-1/+2
Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k_hw: disable phy restart on baseband panic caused by RXSMRajkumar Manoharan3-1/+28
While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: Reset chip on baseband hangRajkumar Manoharan1-1/+3
Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26b43: N-PHY: initialize last var in calibration functionRafał Miłecki1-1/+1
Reported-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26rtlwifi: Use order 2 RX buffer allocation only if necessaryLarry Finger1-0/+7
Although a previous fix handles the kernel panics that result from failure to allocate a new RX buffer, memory fragmentation can be reduced if the amsdu_8k capability is disabled as new buffers need only be of O(0), not O(2). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26rtlwifi: Fix kernel panic resulting from RX buffer allocation failureLarry Finger1-13/+15
To handle amsdu_8k capability, the PCI routine of this driver must allocate receive buffers of order 2. Under heavy load, this causes fragmentation of memory. The present code releases the current buffer before checking to see if a new one is availble. Recovery from allocation failures is not possible, which results in kernel panics. The fix is to reorder the code to check that a new buffer can be allocated before the old one is released. If not possible, the received frame is dropped and the old one is reused. Without this change, it is impossible to transfer a 2 GB file without a kernel panic. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.{37,38,39}] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26mwifiex: correct event header lengthYogesh Ashok Powar1-2/+2
While decoding received event packet from firmware, 4 bytes of interface header are already removed unconditionally. So for handling event only 4 more bytes needs to be pulled. This is achieved by changing event header length to 4. Almost all the events, except BA stream related and AMSDU aggregation control events, do not have the payload in their event skb. Such events handling depends only on the event ID. This event ID is the first four bytes of the event skb, which is copied to a separate variable before pulling the skb header. Hence event handling worked only for those events that didn't have payload in event skb. This patch fixes the broken event path of the events with payload in their event skb without harming existing working event path for the events without payload. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 13:34:39 +0300