summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16r8152: move calling delay_autosuspend functionhayeswang1-7/+5
Move calling delay_autosuspend() in rtl8152_runtime_suspend(). Calling delay_autosuspend() as late as possible. The original flows are 1. check if the driver/device is busy now. 2. set wake events. 3. enter runtime suspend. If the wake event occurs between (1) and (2), the device may miss it. Besides, to avoid the runtime resume occurs after runtime suspend immediately, move the checking to the end of rtl8152_runtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: split rtl8152_resume functionhayeswang1-38/+61
Split rtl8152_resume() into rtl8152_runtime_resume() and rtl8152_system_resume(). Besides, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Refactor mlx4_en_free_tx_descTariq Toukan1-29/+16
Some code re-ordering, functionally equivalent. - The !tx_info->inl check is evaluated anyway in both flows (common case/end case). Run it first, this might finish the flows earlier. - dma_unmap calls are identical in both flows, get it out of the if block into the common area. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Replace TXBB_SIZE multiplications with shift operationsTariq Toukan2-13/+16
Define LOG_TXBB_SIZE, log of TXBB_SIZE, and use it with a shift operation instead of a multiplication with TXBB_SIZE. Operations are equivalent as TXBB_SIZE is a power of two. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Increase default TX ring sizeTariq Toukan1-1/+1
Increase the default TX ring size (from 512 to 1024) to match the RX ring size. This gives the XDP TX ring a better chance to keep up with the rate of its RX ring in case of a high load of XDP_TX actions. Tested: Ethtool counter rx_xdp_tx_full used to increase, after applying this patch it stopped. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Poll XDP TX completion queue in RX NAPITariq Toukan5-16/+51
Instead of having their own NAPIs, XDP TX completion queues get polled within the corresponding RX NAPI. This prevents any possible race on TX ring prod/cons indices, between the context that issues the transmits (RX NAPI) and the context that handles the completions (was previously done in a separate NAPI). This also improves performance, as it decreases the number of NAPIs running on a CPU, saving the overhead of syncing and switching between the contexts. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 12.0 Mpps | 13.8 Mpps | 15% | IPv6 | 12.0 Mpps | 13.8 Mpps | 15% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Improve XDP xmit functionTariq Toukan3-43/+21
Several performance improvements in XDP TX datapath, including: - Ring a single doorbell for XDP TX ring per NAPI budget, instead of doing it per a lower threshold (was 8). This includes removing the flow of immediate doorbell ringing in case of a full TX ring. - Compiler branch predictor hints. - Calculate values in compile time rather than in runtime. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.3 Mpps | 12.0 Mpps | 17% | IPv6 | 10.3 Mpps | 12.0 Mpps | 17% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Improve stack xmit functionTariq Toukan1-64/+87
Several small code and performance improvements in stack TX datapath, including: - Compiler branch predictor hints. - Minimize variables scope. - Move tx_info non-inline flow handling to a separate function. - Calculate data_offset in compile time rather than in runtime (for !lso_header_size branch). - Avoid trinary-operator ("?") when value can be preset in a matching branch. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Improve transmit CQ pollingTariq Toukan1-6/+7
Several small performance improvements in TX CQ polling, including: - Compiler branch predictor hints. - Minimize variables scope. - More proper check of cq type. - Use boolean instead of int for a binary indication. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Packet-rate tests for both regular stack and XDP use cases: No noticeable gain, no degradation. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Improve receive data-pathTariq Toukan1-34/+39
Several small performance improvements in RX datapath, including: - Compiler branch predictor hints. - Replace a multiplication with a shift operation. - Minimize variables scope. - Write-prefetch for packet header. - Avoid trinary-operator ("?") when value can be preset in a matching branch. - Save a branch by updating RX ring doorbell within mlx4_en_refill_rx_buffers(), which now returns void. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON (enable by ethtool -L <interface> rx 1). XDP_DROP packet rate: Same (28.1 Mpps), lower CPU utilization (from ~100% to ~92%). Drop packets in TC: ------------------------------------- | Before | After | Gain | IPv4 | 4.14 Mpps | 4.18 Mpps | 1% | ------------------------------------- XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.1 Mpps | 10.3 Mpps | 2% | IPv6 | 10.1 Mpps | 10.3 Mpps | 2% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Optimized single ring steeringSaeed Mahameed5-22/+50
Avoid touching RX QP RSS context when loading with only one RX ring, to allow optimized A0 RX steering. Enable by: - loading mlx4_core with module param: log_num_mgm_entry_size = -6. - then: ethtool -L <interface> rx 1 Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_DROP packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 20.5 Mpps | 28.1 Mpps | 37% | IPv6 | 18.4 Mpps | 28.1 Mpps | 53% | ------------------------------------- Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16net/mlx4_en: Remove unused argument in TX datapath functionTariq Toukan2-9/+7
Remove owner argument, as it is obsolete and unused. This also saves the overhead of calculating its value in data-path. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: add byte_enable for ocp_read_word functionhayeswang1-1/+3
Add byte_enable for ocp_read_word() to replace reading 4 bytes data with reading the desired 2 bytes data. This is used to avoid the issue which is described in commit b4d99def0938 ("r8152: remove sram_read"). The original method always reads 4 bytes data, and it may have problem when reading the PHY registers. The new method is supported since RTL8153B, but it doesn't influence the previous chips. The bits of the byte_enable for the previous chips are the reserved bits, and the hw would ignore them. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support RTL8153Bhayeswang1-15/+658
This patch supports two new chips for RTL8153B. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support new chip 8050hayeswang1-0/+10
The settings of the new chip are the same with RTL8152, except that its product ID is 0x8050. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Exit polling routine correctly during adapter resetThomas Falcon1-3/+6
This patch fixes a bug where, in the case of a device reset, the polling routine will never complete, causing napi_disable to sleep indefinitely when attempting to close the device. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Remove VNIC_CLOSING check from pending_scrqThomas Falcon1-2/+1
Fix a kernel panic resulting from data access of a NULL pointer during device close. The pending_scrq routine is meant to determine whether there is a valid sub-CRQ message awaiting processing. When the device is closing, however, there is a possibility that NULL messages can be processed because pending_scrq will always return 1 even if there no valid message in the queue. It's not clear what this closing state check was originally meant to accomplish, so just remove it. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Sanitize entire SCRQ buffer on resetThomas Falcon1-1/+1
Fixup a typo so that the entire SCRQ buffer is cleaned. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Ensure that TX queues are disabled in __ibmvnic_closeThomas Falcon1-1/+7
Use netif_tx_disable to guarantee that TX queues are disabled when __ibmvnic_close is called by the device reset routine. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Activate disabled RX buffer pools on resetThomas Falcon1-0/+1
RX buffer pools are disabled while awaiting a device reset if firmware indicates that the resource is closed. This patch fixes a bug where pools were not being subsequently enabled after the device reset, causing the device to become inoperable. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15sunvnet: restrict advertized checksum offloads to just IPShannon Nelson2-2/+2
As much as we'd like to play well with others, we really aren't handling the checksums on non-IP protocol packets very well. This is easily seen when trying to do TCP over ipv6 - the checksums are garbage. Here we restrict the checksum feature flag to just IP traffic so that we aren't given work we can't yet do. Orabug: 26175391, 26259755 Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: s2io: remove useless variable in fill_rx_buffersGustavo A. R. Silva1-5/+0
Remove useless variable rxd_index and code related. Addresses-Coverity-ID: 1397691 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Prio and Tag macrosVivien Didelot2-19/+32
Prefix and document the remaining Global IP and IEEE Priority and Core Tag Type registers and give them a clear 16-bit register representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Stats macrosVivien Didelot3-30/+41
Prefix and document the Global Stats Operation and Counter registers and give them a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Monitor Control macrosVivien Didelot2-43/+60
Prefix and document the Global Monitor Control Register macros (which became the Global Monitor & MGMT Control Register with 88E6390) and give a clear 16-bit registers representation. Use __bf_shf to get the shift value at compile time instead of adding new defined macros for it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Control macrosVivien Didelot3-46/+50
Prefix and document the Global Control and Control 2 registers macros and give a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global VTU macrosVivien Didelot4-68/+90
Prefix and document the Global VTU registers macros and give a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global ATU macrosVivien Didelot3-68/+85
Prefix and document the Global ATU Registers macros and give clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Switch MAC macrosVivien Didelot3-22/+37
Prefix and document the Global Switch MAC Address Register macros and give clear 16-bit register representation. At the same time, move mv88e6xxx_g1_set_switch_mac in global1.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Status macrosVivien Didelot4-31/+33
Prefix and document the Global Status Register macros and give clear 16-bit register representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller76-308/+537
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15i40e: Fix a sleep-in-atomic bugJia-Ju Bai1-0/+2
The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14liquidio: fix VF driver off-by-one bug when setting ethtool -C ethX rx-framesWeilin Chang1-1/+1
Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net/mlxfw: fix a NULL dereferenceDan Carpenter1-0/+1
If we hit this error path we end up returning ERR_PTR(0) which is NULL. The caller is not expecting that so it results in a NULL dereference. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14qed: Fix an off by one bugDan Carpenter1-1/+1
The p_l2_info->pp_qid_usage[] array has "p_l2_info->queues" elements so the > here should be a >= or we write beyond the end of the array. Fixes: bbe3f233ec5e ("qed: Assign a unique per-queue index to queue-cid") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14mlxsw: spectrum: Add support for access cable info via ethtoolArkadi Sharshevsky1-0/+131
Add support for access cable info via ethtool. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14mlxsw: reg: Add MCIA register for cable info accessArkadi Sharshevsky1-0/+76
The MCIA register is used to access the SFP+ and QSFP connector's EPROM. It will be used to query the cable info. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14macvlan: propagate the mac address change status for lowerdevZhang Shengju1-4/+2
The macvlan dev should propagate the return value of mac address change for lower device in the passthru mode, instead of always return 0. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14ixgbe: pci_set_drvdata must be called before register_netdevJeff Mahoney1-1/+1
We call pci_set_drvdata immediately after calling register_netdev, which leaves a window where tasks writing to the sriov_numvfs sysfs attribute can sneak in and crash the kernel. register_netdev cleans up after itself so placing pci_set_drvdata immediately before it should preserve the intent of commit 0fb6a55cc31f ("ixgbe: fix crash on rmmod after probe fail"). Fixes: 0fb6a55cc31f ("ixgbe: fix crash on rmmod after probe fail") Signed-off-by: Jeff Mahoney <jeffm@suse.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: Resolve cppcheck format string warningTony Nguyen1-1/+1
cppcheck warns that the format string is incorrect in the function ixgbe_get_strings(). Since the value cannot be negative, change the variable to unsigned which matches the format specifier. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: fix writes to PFQDEEmil Tantilov1-1/+1
ixgbe_write_qde() was ignoring the qde parameter which resulted in PFQDE.HIDE_VLAN not being set for X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbevf: Bump version numberTony Nguyen1-1/+1
Update ixgbevf version number. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: Bump version numberTony Nguyen1-1/+1
Update ixgbe version number. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: check for Tx timestamp timeouts during watchdogJacob Keller3-0/+29
The ixgbe driver has logic to handle only one Tx timestamp at a time, using a state bit lock to avoid multiple requests at once. It may be possible, if incredibly unlikely, that a Tx timestamp event is requested but never completes. Since we use an interrupt scheme to determine when the Tx timestamp occurred we would never clear the state bit in this case. Add an ixgbe_ptp_tx_hang() function similar to the already existing ixgbe_ptp_rx_hang() function. This function runs in the watchdog routine and makes sure we eventually recover from this case instead of permanently disabling Tx timestamps. Note: there is no currently known way to cause this without hacking the driver code to force it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: add statistic indicating number of skipped Tx timestampsJacob Keller3-10/+17
The ixgbe driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: avoid permanent lock of *_PTP_TX_IN_PROGRESSJacob Keller1-5/+15
The ixgbe driver uses a state bit lock to avoid handling more than one Tx timestamp request at once. This is required because hardware is limited to a single set of registers for Tx timestamps. The state bit lock is not properly cleaned up during ixgbe_xmit_frame_ring() if the transmit fails such as due to DMA or TSO failure. In some hardware this results in blocking timestamps until the service task times out. In other hardware this results in a permanent lock of the timestamp bit because we never receive an interrupt indicating the timestamp occurred, since indeed the packet was never transmitted. Fix this by checking for DMA and TSO errors in ixgbe_xmit_frame_ring() and properly cleaning up after ourselves when these occur. Reported-by: Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: fix race condition with PTP_TX_IN_PROGRESS bitsJacob Keller1-3/+12
Hardware related to the ixgbe driver is limited to handling a single Tx timestamp request at a time. Thus, the driver ignores requests for Tx timestamp while waiting for the current request to finish. It uses a state bit lock which enforces that only one timestamp request is honored at a time. Unfortunately this suffers from a simple race condition. The bit lock is not cleared until after skb_tstamp_tx() is called notifying applications of a new Tx timestamp. Even a well behaved application sending only one packet at a time and waiting for a response can wake up and send a new packet before the bit lock is cleared. This results in needlessly dropping some Tx timestamp requests. We can fix this by unlocking the state bit as soon as we read the Timestamp register, as this is the first point at which it is safe to unlock. To avoid issues with the skb pointer, we'll use a copy of the pointer and set the global variable in the driver structure to NULL first. This ensures that the next timestamp request does not modify our local copy of the skb pointer. This ensures that well behaved applications do not accidentally race with the unlock bit. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli2-4/+4
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13cxgb4: handle serial flash interruptGanesh Goudar1-1/+1
If SF bit is not cleared in PL_INT_CAUSE, subsequent non-data interrupts are not raised. Enable SF bit in Global Interrupt Mask and handle it as non-fatal and hence eventually clear it. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13fjes: remove duplicate set of flag IFF_BROADCASTZhang Shengju1-1/+0
Remove unnecessary setting of flag IFF_BROADCAST, since ether_setup already does this. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 11:36:00 +0300