summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-05-07bnx2: Add prefetches to rx path.Michael Chan2-3/+14
Add prefetches of the skb and the next rx descriptor to speed up rx path. Use prefetchw() for the skb [suggested by Eric Dumazet]. The rx descriptor is in skb->data which is mapped for streaming mode DMA. Eric Dumazet pointed out that we should not prefetch the data before dma_sync. So we prefetch only if dma_sync is no_op on the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07bnx2: Add GRO support.Michael Chan1-3/+3
And turn on NETIF_F_GRO by default [requested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07tehuti: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07sunhme: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07smc9194: Remove unnecessary memset of netdev private dataTobias Klauser1-3/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07ethoc: Remove unnecessary memset of napi member in netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set the napi member it to 0 explicitely. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07bcm63xx_enet: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07KS8695: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-073c523: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-073c507: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06net: emaclite: Use resource_sizeTobias Klauser1-2/+2
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: Reset 82577/82578 PHY before first PHY register readBruce Allan1-0/+10
Reset the PHY before first accessing it. Doing so, ensure that the PHY is in a known good state before we read/write PHY registers. This fixes a driver probe failure. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0Bruce Allan2-0/+22
During Sx->S0 transitions, the interconnect between the MAC and PHY on 82577/82578 can remain in SMBus mode instead of transitioning to the PCIe-like mode required during normal operation. Toggling the LANPHYPC Value bit essentially resets the interconnect forcing it to the correct mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bonding: make bonding support netpollWANG Cong1-1/+98
Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netpoll: add generic support for bridge and bonding devicesWANG Cong1-6/+9
This whole patchset is for adding netpoll support to bridge and bonding devices. I already tested it for bridge, bonding, bridge over bonding, and bonding over bridge. It looks fine now. To make bridge and bonding support netpoll, we need to adjust some netpoll generic code. This patch does the following things: 1) introduce two new priv_flags for struct net_device: IFF_IN_NETPOLL which identifies we are processing a netpoll; IFF_DISABLE_NETPOLL is used to disable netpoll support for a device at run-time; 2) introduce one new method for netdev_ops: ->ndo_netpoll_cleanup() is used to clean up netpoll when a device is removed. 3) introduce netpoll_poll_dev() which takes a struct net_device * parameter; export netpoll_send_skb() and netpoll_poll_dev() which will be used later; 4) hide a pointer to struct netpoll in struct netpoll_info, ditto. 5) introduce ->real_dev for struct netpoll. 6) introduce a new status NETDEV_BONDING_DESLAE, which is used to disable netconsole before releasing a slave, to avoid deadlocks. Cc: David Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbevf: Cache PF ack bit in interruptGreg Rose1-0/+16
When the PF acks a message from the VF the VF gets an interrupt. It must cache the ack bit so that polling SW will not miss the ack. Also avoid reading the message buffer on acks because that also will clear the ack bit. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Streamline MC filter setup for VFsGreg Rose1-2/+11
The driver was calling the set Rx mode function for every multicast filter set by the VF. When starting many VMs where each might have multiple VLAN interfaces this would result in the function being called hundreds or even thousands of times. This is unnecessary for the case of the imperfect filters used in the MTA and has been streamlined to be more efficient. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Remove unneeded register writes in VF VLAN setupGreg Rose1-11/+0
The driver is unnecessarily writing values to VLAN control registers. These writes already done elsewhere and are superfluous here. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller2-8/+51
2010-05-06igb: reduce cache misses on tx cleanupNick Nunley2-27/+22
This patch reduces the number of skb cache misses in the clean_tx_irq path, and results in an overall increase in tx packet throughput. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ks8851: companion eeprom access through ethtoolSebastien Jan1-0/+114
Accessing ks8851 companion eeprom permits modifying the ks8851 stored MAC address. Example how to change the MAC address using ethtool, to set the 01:23:45:67:89:AB MAC address: $ echo "0:AB8976452301" | xxd -r > mac.bin $ sudo ethtool -E eth0 magic 0x8870 offset 2 < mac.bin Signed-off-by: Sebastien Jan <s-jan@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ks8851: Low level functions for read/write to companion eepromSebastien Jan2-1/+241
Low-level functions provide 16bits words read and write capability to ks8851 companion eeprom. Signed-off-by: Sebastien Jan <s-jan@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ks8851: Add caching of CCR registerSebastien Jan1-0/+12
CCR register contains information on companion eeprom availability. Signed-off-by: Sebastien Jan <s-jan@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06forcedeth: Account for consumed budget in napi pollTom Herbert1-2/+3
Repeated calls to nv_rx_process in napi poll routine do not take portion of budget that has been consumed in previous calls. Fix by subtracting the number of packets processed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Remove some gratuitous blank lines.David Daney1-7/+0
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Try not to drop TX packets when stopping the queue.David Daney1-5/+11
Stop the queue when we add the packet that will fill it instead of dropping the packet Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Free TX skbufs in a timely manner.David Daney1-3/+2
We also reduce the high water mark to 1 so skbufs are not stranded for long periods of time. Since we are cleaning after each packet, no need to do it in the transmit path. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Fix race manipulating irq bits.David Daney1-2/+1
Don't re-read the interrupt status register, clear the exact bits we will be testing. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Fix race condition freeing TX buffers.David Daney1-2/+9
Under heavy load the TX cleanup tasklet and xmit threads would race and try to free too many buffers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netdev: octeon_mgmt: Use proper MAC addresses.David Daney1-10/+5
The original implementation incorrectly uses netdev->dev_addrs. Use netdev->uc instead. Also use netdev_for_each_uc_addr to iterate over the addresses. Fix comment. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Add support for VF MAC and VLAN configurationGreg Rose5-4/+118
Add support for the "ip link set" and "ip link show" commands that allow configuration of the virtual functions' MAC and port VLAN via user space command line. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Add boolean parameter to ixgbe_set_vmolrGreg Rose3-6/+9
Add a boolean parameter to ixgbe-set_vmolr so that the caller can specify whether the pool should accept untagged packets. Required for a follow on patch to enable administrative configuration of port VLAN for virtual functions. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000/e1000e: implement a simple interrupt moderationJesse Brandeburg6-10/+57
Back before e1000-7.3.20, the e1000 driver had a simple algorithm that managed interrupt moderation. The driver was updated in 7.3.20 to have the new "adaptive" interrupt moderation but we have customer requests to redeploy the old way as an option. This patch adds the old functionality back. The new functionality can be enabled via module parameter or at runtime via ethtool. Module parameter: (InterruptThrottleRate=4) to use this new moderation method. Ethtool method: ethtool -C ethX rx-usecs 4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: increase rx fifo size to 36K on 82574 and 82583Alexander Duyck1-2/+2
This change increases the RX fifo size to 36K for standard frames and decreases the TX fifo size to 4K. The reason for this change is that on slower systems the RX is much more likely to backfill and need space than the TX is. As long as the TX fifo is twice the size of the MTU we should have more than enough TX fifo. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: Save irq into netdev structureTom Herbert1-0/+2
Set net->devirq to pdev->irq. This should be consistent with other drivers. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: Remove unnessary log messageTom Herbert1-1/+0
Remove e_info message printed whenever TSO is enabled or disabled. This is not very useful and just clutters dmesg. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: reduce writes of RX producer ptrTom Herbert1-34/+23
Reduce number of writes to RX producer pointer. When alloc'ing RX buffers, only write the RX producer pointer once every E1000_RX_BUFFER_WRITE (16) buffers created. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: save skb counts in TX to avoid cache missesTom Herbert2-9/+11
In e1000_tx_map, precompute number of segements and bytecounts which are derived from fields in skb; these are stored in buffer_info. When cleaning tx in e1000_clean_tx_irq use the values in the associated buffer_info for statistics counting, this eliminates cache misses on skb fields. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bnx2x: Fix check to get RX hashTom Herbert1-1/+1
Flag used in check to get rxhash out of the descriptor is incorrect one. Fix to use the proper features flag. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06Merge branch 'for-davem' of ↵David S. Miller113-1172/+4339
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-05-06Merge branch 'master' of ↵John W. Linville113-1172/+4339
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
2010-05-05rtl8187: use SET_IEEE80211_PERM_ADDRJohn W. Linville1-4/+6
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
2010-05-05pppoe: remove unnecessary checks in pppoe_flush_devJiri Pirko1-6/+0
pernet memory is guaranteed to exist when notifiers are called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-04rtl8180: use SET_IEEE80211_PERM_ADDRJohn W. Linville1-4/+6
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Register frame length in TX entry descriptor instead of L2PAD.Gertjan van Wingerde9-15/+14
And use it consistently in the chipset drivers. Preparation for further clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Fix HT40+/HT40- setting in rt2800.Gertjan van Wingerde2-4/+4
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Enable RT30xx by default.Gertjan van Wingerde1-2/+2
Now that RT30xx support is at the same level as RT28xx support we can enable these devices by default. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Remove rt2x00pci.h include from rt2800lib.Gertjan van Wingerde1-3/+0
PCI specific code has been remove quite some time ago. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04iwlwifi: recalculate average tpt if not currentReinette Chatre1-4/+6
We currently have this check as a BUG_ON, which is being hit by people. Previously it was an error with a recalculation if not current, return that code. The BUG_ON was introduced by: commit 3110bef78cb4282c58245bc8fd6d95d9ccb19749 Author: Guy Cohen <guy.cohen@intel.com> Date: Tue Sep 9 10:54:54 2008 +0800 iwlwifi: Added support for 3 antennas ... the portion adding the BUG_ON is reverted since we are encountering the error and BUG_ON was created with assumption that error is not encountered. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04forcedeth: Kill NAPI config options.David S. Miller2-207/+1
All distributions enable it, therefore no significant body of users are even testing the driver with it disabled. And making NAPI configurable is heavily discouraged anyways. I left the MSI-X interrupt enabling thing in an "#if 0" block so hopefully someone can debug that and it can get re-enabled. Probably it was just one of the NVIDIA chipset MSI erratas that we work handle these days in the PCI quirks (see drivers/pci/quirks.c and stuff like nvenet_msi_disable()). Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 00:49:34 +0300