summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-05-06can: m_can: m_can_tx_work_queue(): fix tx_skb race conditionMarc Kleine-Budde1-1/+2
The m_can_start_xmit() function checks if the cdev->tx_skb is NULL and returns with NETDEV_TX_BUSY in case tx_sbk is not NULL. There is a race condition in the m_can_tx_work_queue(), where first the skb is send to the driver and then the case tx_sbk is set to NULL. A TX complete IRQ might come in between and wake the queue, which results in tx_skb not being cleared yet. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Tested-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251x: fix resume from sleep before interface was brought upFrieder Schrempf1-17/+18
Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required") Link: https://lore.kernel.org/r/17d5d714-b468-482f-f37a-482e3d6df84e@kontron.de Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [mkl: fix error handling in mcp251x_stop()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error ↵Marc Kleine-Budde1-1/+3
path This patch adds the missing can_rx_offload_del(), that must be called if mcp251xfd_register() fails. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Link: https://lore.kernel.org/r/20210504091838.1109047-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probeDan Carpenter1-2/+2
When we converted this code to use dev_err_probe() we accidentally removed a return. It means that if devm_clk_get() it will lead to an Oops when we call clk_get_rate() on the next line. Fixes: cf8ee6de2543 ("can: mcp251xfd: mcp251xfd_probe(): use dev_err_probe() to simplify error handling") Link: https://lore.kernel.org/r/YJANZf13Qxd5Mhr1@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-3/+7
Pull virtio updates from Michael Tsirkin: "A bunch of new drivers including vdpa support for block and virtio-vdpa. Beginning of vq kick (aka doorbell) mapping support. Misc fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits) virtio_pci_modern: correct sparse tags for notify virtio_pci_modern: __force cast the notify mapping vDPA/ifcvf: get_config_size should return dev specific config size vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA vDPA/ifcvf: deduce VIRTIO device ID when probe vdpa_sim_blk: add support for vdpa management tool vdpa_sim_blk: handle VIRTIO_BLK_T_GET_ID vdpa_sim_blk: implement ramdisk behaviour vdpa: add vdpa simulator for block device vhost/vdpa: Remove the restriction that only supports virtio-net devices vhost/vdpa: use get_config_size callback in vhost_vdpa_config_validate() vdpa: add get_config_size callback in vdpa_config_ops vdpa_sim: cleanup kiovs in vdpasim_free() vringh: add vringh_kiov_length() helper vringh: implement vringh_kiov_advance() vringh: explain more about cleaning riov and wiov vringh: reset kiov 'consumed' field in __vringh_iov() vringh: add 'iotlb_lock' to synchronize iotlb accesses vdpa_sim: use iova module to allocate IOVA addresses vDPA/ifcvf: deduce VIRTIO device ID from pdev ids ...
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds8-23/+8
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-05Merge tag 'thermal-v5.13-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Remove duplicate error message for the amlogic driver (Tang Bin) - Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury) - Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund) - Remove duplicate include in ti-bandgap (Zhang Yunkai) - Assign error code in the error path in the function thermal_of_populate_bind_params() (Jia-Ju Bai) - Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian King) - Use the device name instead of auto-numbering for a better identification of the cooling device (Daniel Lezcano) - Improve a bit the division accuracy in the power allocator governor (Jeson Gao) - Enable the missing third sensor on msm8976 (Konrad Dybcio) - Add QCom tsens driver co-maintainer (Thara Gopinath) - Fix memory leak and use after free errors in the core code (Daniel Lezcano) - Add the MDM9607 compatible bindings (Konrad Dybcio) - Fix trivial spello in the copyright name for Hisilicon (Hao Fang) - Fix negative index array access when converting the frequency to power in the energy model (Brian-sy Yang) - Add support for Gen2 new PMIC support for Qcom SPMI (David Collins) - Update maintainer file for CPU cooling device section (Lukasz Luba) - Fix missing put_device on error in the Qcom tsens driver (Guangqing Zhu) - Add compatible DT binding for sm8350 (Robert Foss) - Add support for the MDM9607's tsens driver (Konrad Dybcio) - Remove duplicate error messages in thermal_mmio and the bcm2835 driver (Ruiqi Gong) - Add the Thermal Temperature Cooling driver (Zhang Rui) - Remove duplicate error messages in the Hisilicon sensor driver (Ye Bin) - Use the devm_platform_ioremap_resource_byname() function instead of a couple of corresponding calls (dingsenjie) - Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei) - Add missing property in the DT thermal sensor binding (Rafał Miłecki) - Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe) - Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki) - Replace the thermal_notify_framework() call by a call to the thermal_zone_device_update() function. Remove the function as well as the corresponding documentation (Thara Gopinath) - Add support for the ipq8064-tsens sensor along with a set of cleanups and code preparation (Ansuel Smith) - Add a lockless __thermal_cdev_update() function to improve the locking scheme in the core code and governors (Lukasz Luba) - Fix multiple cooling device notification changes (Lukasz Luba) - Remove unneeded variable initialization (Colin Ian King) * tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits) thermal/drivers/mtk_thermal: Remove redundant initializations of several variables thermal/core/power allocator: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Lock the thermal zone while looping over instances thermal/core/power_allocator: Update once cooling devices when temp is low thermal/core/power_allocator: Maintain the device statistics from going stale thermal/core: Create a helper __thermal_cdev_update() without a lock dt-bindings: thermal: tsens: Document ipq8064 bindings thermal/drivers/tsens: Add support for ipq8064-tsens thermal/drivers/tsens: Drop unused define for msm8960 thermal/drivers/tsens: Replace custom 8960 apis with generic apis thermal/drivers/tsens: Fix bug in sensor enable for msm8960 thermal/drivers/tsens: Use init_common for msm8960 thermal/drivers/tsens: Add VER_0 tsens version thermal/drivers/tsens: Convert msm8960 to reg_field thermal/drivers/tsens: Don't hardcode sensor slope Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation thermal/core: Remove thermal_notify_framework iwlwifi: mvm: tt: Replace thermal_notify_framework dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema ...
2021-05-05net:CXGB4: fix leak if sk_buff is not usedÍñigo Huguet1-7/+9
An sk_buff is allocated to send a flow control message, but it's not sent in all cases: in case the state is not appropiate to send it or if it can't be enqueued. In the first of these 2 cases, the sk_buff was discarded but not freed, producing a memory leak. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-05Fix spelling error from "eleminate" to "eliminate"Sean Gloumeau1-1/+1
Spelling error "eleminate" amended to "eliminate". Signed-off-by: Sean Gloumeau <sajgloumeau@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-04net: stmmac: Clear receive all(RA) bit when promiscuous mode is offRamesh Babu B1-0/+1
In promiscuous mode Receive All bit is set in GMAC packet filter register, but outside promiscuous mode Receive All bit is not cleared, which resulted in all network packets are received when toggle (ON/OFF) the promiscuous mode. Fixes: e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable") Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-04Merge branch 'pci/vpd'Bjorn Helgaas7-9/+8
- Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) * pci/vpd: PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() PCI/VPD: Remove sysfs accessor size checking dead code PCI/VPD: Remove obsolete Broadcom NIC quirk
2021-05-03Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"Xie He1-3/+2
This reverts commit 1b479fb80160 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"). 1. This commit is incorrect. "__skb_pad" will NOT free the skb on failure when its "free_on_error" parameter is "false". 2. This commit claims to fix my commit. But it didn't CC me?? Fixes: 1b479fb80160 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit") Cc: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03ethernet:enic: Fix a use after free bug in enic_hard_start_xmitLv Yunlong1-2/+5
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside enic_queue_wq_skb, if some error happens, the skb will be freed by dev_kfree_skb(skb). But the freed skb is still used in skb_tx_timestamp(skb). My patch makes enic_queue_wq_skb() return error and goto spin_unlock() incase of error. The solution is provided by Govind. See https://lkml.org/lkml/2021/4/30/961. Fixes: fb7516d42478e ("enic: add sw timestamp support") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Acked-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03virtio-net: don't allocate control_buf if not supportedMax Gurtovoy1-3/+7
Not all virtio_net devices support the ctrl queue feature. Thus, there is no need to allocate unused resources. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20210502093319.61313-1-mgurtovoy@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-6/+4
Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...
2021-05-01net: stmmac: Remove duplicate declaration of stmmac_privWan Jiabing1-1/+0
In commit f4da56529da60 ("net: stmmac: Add support for external trigger timestamping"), struct stmmac_priv was declared at line 507 which caused duplicate struct declarations. Remove later duplicate declaration here. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: phy: marvell: enable downshift by defaultMaxim Kochetkov1-12/+50
A number of PHYs support the PHY tunable to set and get downshift. However, only 88E1116R enables downshift by default. Extend this default enabled to all the PHYs that support the downshift tunable. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: atheros: nic-devel@qualcomm.com is deadJohannes Berg2-2/+2
Remove it from the MODULE_AUTHOR statements referencing it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: hns3: disable phy loopback setting in hclge_mac_start_phyYufeng Mo1-0/+2
If selftest and reset are performed at the same time, the phy loopback setting may be still in enable state after the reset, and device cannot link up. So fix this issue by disabling phy loopback before phy_start(). Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: hns3: clear unnecessary reset request in hclge_reset_rebuildYufeng Mo1-0/+6
HW error and global reset are reported through MSIX interrupts. The same error may be reported to different functions at the same time. When global reset begins, the pending reset request set by this error is unnecessary. So clear the pending reset request after the reset is complete to avoid the repeated reset. Fixes: f6162d44126c ("net: hns3: add handling of hw errors reported through MSIX") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: hns3: use netif_tx_disable to stop the transmit queuePeng Li1-1/+1
Currently, netif_tx_stop_all_queues() is used to ensure that the xmit is not running, but for the concurrent case it will not take effect, since netif_tx_stop_all_queues() just sets a flag without locking to indicate that the xmit queue(s) should not be run. So use netif_tx_disable() to replace netif_tx_stop_all_queues(), it takes the xmit queue lock while marking the queue stopped. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: hns3: fix for vxlan gpe tx checksum bugHao Chen1-2/+3
When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet, which has a dest port as the IANA assigned, the hardware is expected to do the checksum offload, but the hardware whose version is below V3 will not do the checksum offload when udp dest port is 4790. So fixes it by doing the checksum in software for this case. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: stmmac: cleared __FPE_REMOVING bit in stmmac_fpe_start_wq()Mohammad Athari Bin Ismail1-0/+1
An issue found when network interface is down and up again, FPE handshake fails to trigger. This is due to __FPE_REMOVING bit remains being set in stmmac_fpe_stop_wq() but not cleared in stmmac_fpe_start_wq(). This cause FPE workqueue task, stmmac_fpe_lp_task() not able to be executed. To fix this, add clearing __FPE_REMOVING bit in stmmac_fpe_start_wq(). Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30PCI/VPD: Remove pci_vpd_find_tag() 'offset' argumentHeiner Kallweit7-9/+8
All callers pass 0 as offset. Therefore remove the parameter and use a fixed offset 0 in pci_vpd_find_tag(). Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30net: dsa: ksz: ksz8863_smi_probe: set proper return value for ksz_switch_alloc()Oleksij Rempel1-1/+1
ksz_switch_alloc() will return NULL only if allocation is failed. So, the proper return value is -ENOMEM. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: dsa: ksz: ksz8795_spi_probe: fix possible NULL pointer dereferenceOleksij Rempel1-0/+3
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory Fixes: cc13e52c3a89 ("net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: dsa: ksz: ksz8863_smi_probe: fix possible NULL pointer dereferenceOleksij Rempel1-0/+3
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30bnx2x: Remove redundant assignment to errYang Li1-1/+0
Variable 'err' is set to -EIO but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: macb: Remove redundant assignment to queueJiapeng Chong1-2/+2
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()Jian Shen1-0/+5
In some cases, the device is not initialized because reset failed. If another task calls hns3_reset_notify_up_enet() before reset retry, it will cause an error since uninitialized pointer access. So add check for HNS3_NIC_STATE_INITED before calling hns3_nic_net_open() in hns3_reset_notify_up_enet(). Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: hns3: initialize the message content in hclge_get_link_mode()Yufeng Mo1-1/+1
The message sent to VF should be initialized, otherwise random value of some contents may cause improper processing by the target. So add a initialization to message in hclge_get_link_mode(). Fixes: 9194d18b0577 ("net: hns3: fix the problem that the supported port is empty") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30net: hns3: fix incorrect configuration for igu_egu_hw_errYufeng Mo2-2/+4
According to the UM, the type and enable status of igu_egu_hw_err should be configured separately. Currently, the type field is incorrect when disable this error. So fix it by configuring these two fields separately. Fixes: bf1faf9415dd ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1060-19116/+83154
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-29net: selftest: fix build issue if INET is disabledOleksij Rempel2-2/+2
In case ethernet driver is enabled and INET is disabled, selftest will fail to build. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: tun: Remove redundant assignment to retYang Li1-1/+0
Variable 'ret' is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: drivers/net/tun.c:3008:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619603852-114996-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: phy: marvell: add downshift support for M88E1240Maxim Kochetkov1-0/+2
Add downshift support for 88E1240, it uses the same downshift configuration registers as 88E1011. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20210428095356.621536-1-fido_max@inbox.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255Colin Ian King1-1/+1
Currently the for-loop in ksz8_port_init_cnt is causing a static analysis infinite loop warning with the comparison of mib->cnt_ptr < dev->reg_mib_cnt. This occurs because mib->cnt_ptr is a u8 and dev->reg_mib_cnt is an int and the analyzer determines that mib->cnt_ptr potentially can wrap around to zero if the value in dev->reg_mib_cnt is > 255. However, this value is never this large, it is always less than 256 so make reg_mib_cnt a u8. Addresses-Coverity: ("Infinite loop") Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428120010.337959-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-28Merge tag 'locking-core-2021-04-28' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - rtmutex cleanup & spring cleaning pass that removes ~400 lines of code - Futex simplifications & cleanups - Add debugging to the CSD code, to help track down a tenacious race (or hw problem) - Add lockdep_assert_not_held(), to allow code to require a lock to not be held, and propagate this into the ath10k driver - Misc LKMM documentation updates - Misc KCSAN updates: cleanups & documentation updates - Misc fixes and cleanups - Fix locktorture bugs with ww_mutexes * tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) kcsan: Fix printk format string static_call: Relax static_call_update() function argument type static_call: Fix unused variable warn w/o MODULE locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock() locking/rtmutex: Restrict the trylock WARN_ON() to debug locking/rtmutex: Fix misleading comment in rt_mutex_postunlock() locking/rtmutex: Consolidate the fast/slowpath invocation locking/rtmutex: Make text section and inlining consistent locking/rtmutex: Move debug functions as inlines into common header locking/rtmutex: Decrapify __rt_mutex_init() locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs locking/rtmutex: Inline chainwalk depth check locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c locking/rtmutex: Remove empty and unused debug stubs locking/rtmutex: Consolidate rt_mutex_init() locking/rtmutex: Remove output from deadlock detector locking/rtmutex: Remove rtmutex deadlock tester leftovers locking/rtmutex: Remove rt_mutex_timed_lock() MAINTAINERS: Add myself as futex reviewer locking/mutex: Remove repeated declaration ...
2021-04-28sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queuesIgnat Korchagin1-0/+2
efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues") Cc: <stable@vger.kernel.org> # 5.12.x Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: Add Microchip KSZ8863 SMI based driver supportMichael Grzeschik3-1/+223
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the Microchip SMI Interface. They are supported using the MDIO-Bitbang Interface. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: phy: Add support for microchip SMI0 MDIO busAndrew Lunn2-2/+14
SMI0 is a mangled version of MDIO. The main low level difference is the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The read/write information is instead encoded in the PHY address. Extend the bit-bang code to allow the op code to be overridden, but default to normal C22 values. Add an extra compatible to the mdio-gpio driver, and when this compatible is present, set the op codes to 0. A higher level driver, sitting on top of the basic MDIO bus driver can then implement the rest of the microchip SMI0 odderties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: Add Microchip KSZ8863 SPI based driver supportMichael Grzeschik1-12/+32
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the SPI Interface. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: add support for ksz88xx chipsOleksij Rempel3-71/+281
We add support for the ksz8863 and ksz8873 chips which are using the same register patterns but other offsets as the ksz8795. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: move register offsets and shifts to separate ↵Michael Grzeschik3-160/+281
struct In order to get this driver used with other switches the functions need to use different offsets and register shifts. This patch changes the direct use of the register defines to register description structures, which can be set depending on the chips register layout. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: move cpu_select_interface to extra functionMichael Grzeschik1-42/+50
This patch moves the cpu interface selection code to a individual function specific for ksz8795. It will make it simpler to customize the code path for different switches supported by this driver. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: microchip: ksz8795: change drivers prefix to be genericMichael Grzeschik3-117/+111
The driver can be used on other chips of this type. To reflect this we rename the drivers prefix from ksz8795 to ksz8. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: mscc: ocelot: support PTP Sync one-step timestampingYangbo Lu2-4/+57
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp configuration, the PTP Sync one-step timestamping had never been supported. This patch is to truely support it. - ocelot_port_txtstamp_request() This function handles tx timestamp request by storing ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd, and additionally for two-step timestamp storing ts_id in OCELOT_SKB_CB(clone)->ptp_cmd. - ocelot_ptp_rew_op() During xmit, this function is called to get rew_op (rewriter option) by checking skb->cb for tx timestamp request, and configure to transmitting. Non-onestep-Sync packet with one-step timestamp request falls back to use two-step timestamp. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: mscc: ocelot: convert to ocelot_port_txtstamp_request()Yangbo Lu3-22/+35
Convert to a common ocelot_port_txtstamp_request() for TX timestamp request handling. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: free skb->cb usage in core driverYangbo Lu5-8/+8
Free skb->cb usage in core driver and let device drivers decide to use or not. The reason having a DSA_SKB_CB(skb)->clone was because dsa_skb_tx_timestamp() which may set the clone pointer was called before p->xmit() which would use the clone if any, and the device driver has no way to initialize the clone pointer. This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning of dsa_slave_xmit(). Some new features in the future, like one-step timestamp may need more bytes of skb->cb to use in dsa_skb_tx_timestamp(), and p->xmit(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: dsa: no longer clone skb in core driverYangbo Lu7-36/+54
It was a waste to clone skb directly in dsa_skb_tx_timestamp(). For one-step timestamping, a clone was not needed. For any failure of port_txtstamp (this may usually happen), the skb clone had to be freed. So this patch moves skb cloning for tx timestamp out of dsa core, and let drivers clone skb in port_txtstamp if they really need. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 15:07:57 +0300