summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26bnxt_en: Add missing DMA memory barriersMichael Chan1-0/+12
[ Upstream commit 828affc27ed43441bd1efdaf4e07e96dd43a0362 ] Each completion ring entry has a valid bit to indicate that the entry contains a valid completion event. The driver's main poll loop __bnxt_poll_work() has the proper dma_rmb() to make sure the valid bit of the next entry has been checked before proceeding further. But when we call bnxt_rx_pkt() to process the RX event, the RX completion event consists of two completion entries and only the first entry has been checked to be valid. We need the same barrier after checking the next completion entry. Add missing dma_rmb() barriers in bnxt_rx_pkt() and other similar locations. Fixes: 67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.") Reported-by: Lance Richardson <lance.richardson@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Lance Richardson <lance.richardson@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt_en: Disable aRFS if running on 212 firmwareMichael Chan1-0/+3
[ Upstream commit 976e52b718c3de9077fff8f3f674afb159c57fb1 ] 212 firmware broke aRFS, so disable it. Traffic may stop after ntuple filters are inserted and deleted by the 212 firmware. Fixes: ae10ae740ad2 ("bnxt_en: Add new hardware RFS mode.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: 6pack: fix slab-out-of-bounds in decode_dataPavel Skripkin1-0/+6
[ Upstream commit 19d1532a187669ce86d5a2696eb7275310070793 ] Syzbot reported slab-out-of bounds write in decode_data(). The problem was in missing validation checks. Syzbot's reproducer generated malicious input, which caused decode_data() to be called a lot in sixpack_decode(). Since rx_count_cooked is only 400 bytes and noone reported before, that 400 bytes is not enough, let's just check if input is malicious and complain about buffer overrun. Fail log: ================================================================== BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843 Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0 ... Workqueue: events_unbound flush_to_ldisc Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137 decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843 decode_data drivers/net/hamradio/6pack.c:965 [inline] sixpack_decode drivers/net/hamradio/6pack.c:968 [inline] Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: count Tx dropsJakub Kicinski1-0/+2
[ Upstream commit fb9f7190092d2bbd1f8f0b1cc252732cbe99a87e ] Drivers should count packets they are dropping. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: make sure xmit_more + errors does not miss doorbellsJakub Kicinski2-13/+27
[ Upstream commit e8d8c5d80f5e9d4586c68061b62c642752289095 ] skbs are freed on error and not put on the ring. We may, however, be in a situation where we're freeing the last skb of a batch, and there is a doorbell ring pending because of xmit_more() being true earlier. Make sure we ring the door bell in such situations. Since errors are rare don't pay attention to xmit_more() and just always flush the pending frames. The busy case should be safe to be left alone because it can only happen if start_xmit races with completions and they both enable the queue. In that case the kick can't be pending. Noticed while reading the code. Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: disable napi before canceling DIMJakub Kicinski1-2/+1
[ Upstream commit 01cca6b9330ac7460de44eeeb3a0607f8aae69ff ] napi schedules DIM, napi has to be disabled first, then DIM canceled. Noticed while reading the code. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: don't lock the tx queue from napi pollJakub Kicinski1-22/+32
[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ] We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26mt76: fix enum type mismatchArnd Bergmann4-4/+6
[ Upstream commit abf3d98dee7c4038152ce88833ddc2189f68cbd4 ] There is no 'NONE' version of 'enum mcu_cipher_type', and returning 'MT_CIPHER_NONE' causes a warning: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c: In function 'mt7921_mcu_get_cipher': drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:24: error: implicit conversion from 'enum mt76_cipher_type' to 'enum mcu_cipher_type' [-Werror=enum-conversion] 114 | return MT_CIPHER_NONE; | ^~~~~~~~~~~~~~ Add the missing MCU_CIPHER_NONE defintion that fits in here with the same value. Fixes: c368362c36d3 ("mt76: fix iv and CCMP header insertion") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721150745.1914829-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ] Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: usb: pegasus: Check the return value of get_geristers() and friends;Petko Manolov1-33/+75
[ Upstream commit 8a160e2e9aeb8318159b48701ad8a6e22274372d ] Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Reviewed-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26qede: fix crash in rmmod qede while automatic debug collectionPrabhakar Kushwaha2-0/+9
[ Upstream commit 1159e25c137422bdc48ee96e3fb014bd942092c6 ] A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: sja1105: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-1/+3
[ Upstream commit 21b52fed928e96d2f75d2f6aa9eac7a4b0b55d22 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: lantiq: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-4/+10
[ Upstream commit 871a73a1c8f55da0a3db234e9dd816ea4fd546f2 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 58c59ef9e930 ("net: dsa: lantiq: Add Forwarding Database access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: lan9303: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-15/+19
[ Upstream commit ada2fee185d8145afb89056558bb59545b9dbdd0 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: ab335349b852 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: hellcreek: fix broken backpressure in .port_fdb_dumpVladimir Oltean1-2/+5
[ Upstream commit cd391280bf4693ceddca8f19042cff42f98c1a89 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Don't use phy_port_cnt in VLAN table lookupBen Hutchings1-4/+4
[ Upstream commit 411d466d94a6b16a20c8b552e403b7e8ce2397a2 ] The magic number 4 in VLAN table lookup was the number of entries we can read and write at once. Using phy_port_cnt here doesn't make sense and presumably broke VLAN filtering for 3-port switches. Change it back to 4. Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt ...") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Fix VLAN filteringBen Hutchings1-0/+11
[ Upstream commit 164844135a3f215d3018ee9d6875336beb942413 ] Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable hardware flag. That controls discarding of packets with a VID that has not been enabled for any port on the switch. Since it is a global flag, set the dsa_switch::vlan_filtering_is_global flag so that the DSA core understands this can't be controlled per port. When VLAN filtering is enabled, the switch should also discard packets with a VID that's not enabled on the ingress port. Set or clear each external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering() to make that happen. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Use software untagging on CPU portBen Hutchings1-1/+8
[ Upstream commit 9130c2d30c17846287b803a9803106318cbe5266 ] On the CPU port, we can support both tagged and untagged VLANs at the same time by doing any necessary untagging in software rather than hardware. To enable that, keep the CPU port's Remove Tag flag cleared and set the dsa_switch::untag_bridge_pvid flag. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Fix VLAN untagged flag change on deletionBen Hutchings1-3/+0
[ Upstream commit af01754f9e3c553a2ee63b4693c79a3956e230ab ] When a VLAN is deleted from a port, the flags in struct switchdev_obj_port_vlan are always 0. ksz8_port_vlan_del() copies the BRIDGE_VLAN_INFO_UNTAGGED flag to the port's Tag Removal flag, and therefore always clears it. In case there are multiple VLANs configured as untagged on this port - which seems useless, but is allowed - deleting one of them changes the remaining VLANs to be tagged. It's only ever necessary to change this flag when a VLAN is added to the port, so leave it unchanged in ksz8_port_vlan_del(). Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Reject unsupported VLAN configurationBen Hutchings2-1/+27
[ Upstream commit 8f4f58f88fe0d9bd591f21f53de7dbd42baeb3fa ] The switches supported by ksz8795 only have a per-port flag for Tag Removal. This means it is not possible to support both tagged and untagged VLANs on the same port. Reject attempts to add a VLAN that requires the flag to be changed, unless there are no VLANs currently configured. VID 0 is excluded from this check since it is untagged regardless of the state of the flag. On the CPU port we could support tagged and untagged VLANs at the same time. This will be enabled by a later patch. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: ksz8795: Fix PVID tag insertionBen Hutchings2-7/+23
[ Upstream commit ef3b02a1d79b691f9a354c4903cf1e6917e315f9 ] ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this: * Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist. * When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID. * When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: microchip: Fix ksz_read64()Ben Hutchings1-6/+2
[ Upstream commit c34f674c8875235725c3ef86147a627f165d23b4 ] ksz_read64() currently does some dubious byte-swapping on the two halves of a 64-bit register, and then only returns the high bits. Replace this with a straightforward expression. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Fix return value from tracer initializationAya Levin1-2/+9
[ Upstream commit bd37c2888ccaa5ceb9895718f6909b247cc372e0 ] Check return value of mlx5_fw_tracer_start(), set error path and fix return value of mlx5_fw_tracer_init() accordingly. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Synchronize correct IRQ when destroying CQShay Drory6-21/+23
[ Upstream commit 563476ae0c5e48a028cbfa38fa9d2fc0418eb88f ] The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: TC, Fix error handling memory leakChris Mi1-0/+1
[ Upstream commit 88bbd7b2369aca4598eb8f38c5f16be98c3bb5d4 ] Free the offload sample action on error. Fixes: f94d6389f6a8 ("net/mlx5e: TC, Add support to offload sample action") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Block switchdev mode while devlink traps are activeAya Levin1-3/+11
[ Upstream commit c85a6b8feb16c0cdbbc8d9f581c7861c4a9ac351 ] Since switchdev mode can't support devlink traps, verify there are no active devlink traps before moving eswitch to switchdev mode. If there are active traps, prevent the switchdev mode configuration. Fixes: eb3862a0525d ("net/mlx5e: Enable traps according to link state") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: Destroy page pool after XDP SQ to fix use-after-freeMaxim Mikityanskiy1-10/+10
[ Upstream commit 8ba3e4c85825c8801a2c298dcadac650a40d7137 ] mlx5e_close_xdpsq does the cleanup: it calls mlx5e_free_xdpsq_descs to free the outstanding descriptors, which relies on mlx5e_page_release_dynamic and page_pool_release_page. However, page_pool_destroy is already called by this point, because mlx5e_close_rq runs before mlx5e_close_xdpsq. This commit fixes the use-after-free by swapping mlx5e_close_xdpsq and mlx5e_close_rq. The commit cited below started calling page_pool_destroy directly from the driver. Previously, the page pool was destroyed under a call_rcu from xdp_rxq_info_unreg_mem_model, which would defer the deallocation until after the XDPSQ is cleaned up. Fixes: 1da4bbeffe41 ("net: core: page_pool: add user refcnt and reintroduce page_pool_destroy") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: Avoid creating tunnel headers for local routeRoi Dayan1-0/+5
[ Upstream commit c623c95afa56bf4bf64e4f58742dc94616ef83db ] It could be local and remote are on the same machine and the route result will be a local route which will result in creating encap id with src/dst mac address of 0. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: DR, Add fail on error check on decapAlex Vesker1-0/+2
[ Upstream commit d3875924dae632d5edd908d285fffc5f07c835a3 ] While processing encapsulated packet on RX, one of the fields that is checked is the inner packet length. If the length as specified in the header doesn't match the actual inner packet length, the packet is invalid and should be dropped. However, such packet caused the NIC to hang. This patch turns on a 'fail_on_error' HW bit which allows HW to drop such an invalid packet while processing RX packet and trying to decap it. Fixes: ad17dc8cf910 ("net/mlx5: DR, Move STEv0 action apply logic") Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Don't skip subfunction cleanup in case of error in module initLeon Romanovsky2-8/+9
[ Upstream commit c633e799641cf13960bd83189b4d5b1b2adb0d4e ] Clean SF resources if mlx5 eth failed to initialize. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18bareudp: Fix invalid read beyond skb's linear dataGuillaume Nault1-5/+11
[ Upstream commit 143a8526ab5fd4f8a0c4fe2a9cb28c181dc5a95f ] Data beyond the UDP header might not be part of the skb's linear data. Use skb_copy_bits() instead of direct access to skb->data+X, so that we read the correct bytes even on a fragmented skb. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/7741c46545c6ef02e70c80a9b32814b22d9616b3.1628264975.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18iavf: Set RSS LUT and key in reset handle pathMd Fahad Iqbal Polash1-5/+8
[ Upstream commit a7550f8b1c9712894f9e98d6caf5f49451ebd058 ] iavf driver should set RSS LUT and key unconditionally in reset path. Currently, the driver does not do that. This patch fixes this issue. Fixes: 2c86ac3c7079 ("i40evf: create a generic config RSS function") Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ice: don't remove netdev->dev_addr from uc sync listBrett Creeley1-8/+15
[ Upstream commit 3ba7f53f8bf1fb862e36c7f74434ac3aceb60158 ] In some circumstances, such as with bridging, it's possible that the stack will add the device's own MAC address to its unicast address list. If, later, the stack deletes this address, the driver will receive a request to remove this address. The driver stores its current MAC address as part of the VSI MAC filter list instead of separately. So, this causes a problem when the device's MAC address is deleted unexpectedly, which results in traffic failure in some cases. The following configuration steps will reproduce the previously mentioned problem: > ip link set eth0 up > ip link add dev br0 type bridge > ip link set br0 up > ip addr flush dev eth0 > ip link set eth0 master br0 > echo 1 > /sys/class/net/br0/bridge/vlan_filtering > modprobe -r veth > modprobe -r bridge > ip addr add 192.168.1.100/24 dev eth0 The following ping command fails due to the netdev->dev_addr being deleted when removing the bridge module. > ping <link partner> Fix this by making sure to not delete the netdev->dev_addr during MAC address sync. After fixing this issue it was noticed that the netdev_warn() in .set_mac was overly verbose, so make it at netdev_dbg(). Also, there is a possibility of a race condition between .set_mac and .set_rx_mode. Fix this by calling netif_addr_lock_bh() and netif_addr_unlock_bh() on the device's netdev when the netdev->dev_addr is going to be updated in .set_mac. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Liang Li <liali@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ice: Stop processing VF messages during teardownAnirudh Venkataramanan2-0/+8
[ Upstream commit c503e63200c679e362afca7aca9d3dc63a0f45ed ] When VFs are setup and torn down in quick succession, it is possible that a VF is torn down by the PF while the VF's virtchnl requests are still in the PF's mailbox ring. Processing the VF's virtchnl request when the VF itself doesn't exist results in undefined behavior. Fix this by adding a check to stop processing virtchnl requests when VF teardown is in progress. Fixes: ddf30f7ff840 ("ice: Add handler to configure SR-IOV") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ice: Prevent probing virtual functionsAnirudh Venkataramanan1-0/+5
[ Upstream commit 50ac7479846053ca8054be833c1594e64de496bb ] The userspace utility "driverctl" can be used to change/override the system's default driver choices. This is useful in some situations (buggy driver, old driver missing a device ID, trying a workaround, etc.) where the user needs to load a different driver. However, this is also prone to user error, where a driver is mapped to a device it's not designed to drive. For example, if the ice driver is mapped to driver iavf devices, the ice driver crashes. Add a check to return an error if the ice driver is being used to probe a virtual function. Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ppp: Fix generating ifname when empty IFLA_IFNAME is specifiedPali Rohár1-1/+1
[ Upstream commit 2459dcb96bcba94c08d6861f8a050185ff301672 ] IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be larger than length of string which contains. Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME was not specified at all or userspace passed empty nul-term string. It is expected that if userspace does not specify ifname for new ppp netdev then kernel generates one in format "ppp<id>" where id matches to the ppp unit id which can be later obtained by PPPIOCGUNIT ioctl. And it works in this way if IFLA_IFNAME is not specified at all. But it does not work when IFLA_IFNAME is specified with empty string. So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function and correctly generates ifname based on ppp unit identifier if userspace did not provided preferred ifname. Without this patch when IFLA_IFNAME was specified with empty string then kernel created a new ppp interface in format "ppp<id>" but id did not match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some number generated by __rtnl_newlink() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: bb8082f69138 ("ppp: build ifname using unit identifier for rtnl based devices") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: phy: micrel: Fix link detection on ksz87xx switch"Ben Hutchings1-2/+0
[ Upstream commit 2383cb9497d113360137a2be308b390faa80632d ] Commit a5e63c7d38d5 "net: phy: micrel: Fix detection of ksz87xx switch" broke link detection on the external ports of the KSZ8795. The previously unused phy_driver structure for these devices specifies config_aneg and read_status functions that appear to be designed for a fixed link and do not work with the embedded PHYs in the KSZ8795. Delete the use of these functions in favour of the generic PHY implementations which were used previously. Fixes: a5e63c7d38d5 ("net: phy: micrel: Fix detection of ksz87xx switch") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: qca: ar9331: make proper initial port defaultsOleksij Rempel1-1/+72
[ Upstream commit 47fac45600aafc5939d9620055c3c46f7135d316 ] Make sure that all external port are actually isolated from each other, so no packets are leaked. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: mvvp2: fix short frame size on s390John Hubbard1-1/+1
[ Upstream commit 704e624f7b3e8a4fc1ce43fb564746d1d07b20c0 ] On s390, the following build warning occurs: drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551584' to '-32' [-Woverflow] 844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE) This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is already 64-byte aligned) on some architectures, actually gets ALIGN'd up to 512 bytes in the s390 case. So then, when this is invoked: MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE) ...that turns into: 704 - 224 - 512 == -32 ...which is not a good frame size to end up with! The warning above is a bit lucky: it notices a signed/unsigned bad behavior here, which leads to the real problem of a frame that is too short for its contents. Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is just exactly big enough. (The other values can't readily be changed without causing a lot of other problems.) Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Cc: Sven Auhagen <sven.auhagen@voleatech.de> Cc: Matteo Croce <mcroce@microsoft.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: dsa: mt7530: add the missing RxUnicast MIB counterDENG Qingfang1-0/+1
[ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ] Add the missing RxUnicast counter. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ieee802154: hwsim: fix GPF in hwsim_new_edge_nlDongliang Mu1-1/+1
[ Upstream commit 889d0e7dc68314a273627d89cbb60c09e1cc1c25 ] Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE must be present to fix GPF. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210707155633.1486603-1-mudongliangabcd@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ieee802154: hwsim: fix GPF in hwsim_set_edge_lqiDongliang Mu1-2/+2
[ Upstream commit e9faf53c5a5d01f6f2a09ae28ec63a3bbd6f64fd ] Both MAC802154_HWSIM_ATTR_RADIO_ID and MAC802154_HWSIM_ATTR_RADIO_EDGE, MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID and MAC802154_HWSIM_EDGE_ATTR_LQI must be present to fix GPF. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210705131321.217111-1-mudongliangabcd@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-casesGrygorii Strashko2-3/+8
commit acc68b8d2a1196c4db806947606f162dbeed2274 upstream. The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net: ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW packed drop issue when packets are sent from Host to the port with PVID and un-tagging enabled. Unfortunately this breaks some other non-switch specific use-cases, like: - [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the packet - [2] Some industrial protocols, which expects min TX packet size 60Bytes (excluding FCS). Fix it by configuring min TX packet size depending on driver mode - 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode - 64Bytes (VLAN_ETH_ZLEN) for switch mode and update it during driver mode change and annotate with READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing. [1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/ [2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669 Cc: stable@vger.kernel.org Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Reported-by: Ben Hutchings <ben.hutchings@essensium.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18net: wwan: mhi_wwan_ctrl: Fix possible deadlockLoic Poulain1-6/+6
commit 34737e1320db6d51f0d140d5c684b9eb32f0da76 upstream. Lockdep detected possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mhiwwan->rx_lock); local_irq_disable(); lock(&mhi_cntrl->pm_lock); lock(&mhiwwan->rx_lock); <Interrupt> lock(&mhi_cntrl->pm_lock); *** DEADLOCK *** To prevent this we need to disable the soft-interrupts when taking the rx_lock. Cc: stable@vger.kernel.org Fixes: fa588eba632d ("net: Add Qcom WWAN control driver") Reported-by: Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15ppp: Fix generating ppp unit id when ifname is not specifiedPali Rohár1-4/+15
commit 3125f26c514826077f2a4490b75e9b1c7a644c42 upstream. When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has to choose interface name as this ioctl API does not support specifying it. Kernel in this case register new interface with name "ppp<id>" where <id> is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This applies also in the case when registering new ppp interface via rtnl without supplying IFLA_IFNAME. PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel assign to ppp interface, in case this ppp id is not already used by other ppp interface. In case user does not specify ppp unit id then kernel choose the first free ppp unit id. This applies also for case when creating ppp interface via rtnl method as it does not provide a way for specifying own ppp unit id. If some network interface (does not have to be ppp) has name "ppp<id>" with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails. And registering new ppp interface is not possible anymore, until interface which holds conflicting name is renamed. Or when using rtnl method with custom interface name in IFLA_IFNAME. As list of allocated / used ppp unit ids is not possible to retrieve from kernel to userspace, userspace has no idea what happens nor which interface is doing this conflict. So change the algorithm how ppp unit id is generated. And choose the first number which is not neither used as ppp unit id nor in some network interface with pattern "ppp<id>". This issue can be simply reproduced by following pppd call when there is no ppp interface registered and also no interface with name pattern "ppp<id>": pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty" Or by creating the one ppp interface (which gets assigned ppp unit id 0), renaming it to "ppp1" and then trying to create a new ppp interface (which will always fails as next free ppp unit id is 1, but network interface with name "ppp1" exists). This patch fixes above described issue by generating new and new ppp unit id until some non-conflicting id with network interfaces is generated. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ↵Letu Ren1-3/+3
ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: qede: Fix end of loop tests for list_for_each_entryHarshvardhan Jha1-2/+2
[ Upstream commit 795e3d2ea68e489ee7039ac29e98bfea0e34a96c ] The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12virt_wifi: fix error on connectMatteo Croce1-20/+32
[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
[ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ] Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
[ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ] Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 16:17:15 +0300