summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-25mlx4: Fix missing error code in mlx4_load_one()Jiapeng Chong1-0/+1
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25net: phy: broadcom: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the ↵Kevin Lo1-1/+1
BCM54811 PHY Restore PHY_ID_BCM54811 accidently removed by commit 5d4358ede8eb. Fixes: 5d4358ede8eb ("net: phy: broadcom: Allow BCM54210E to configure APD") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25can: flexcan: update Kconfig to enable coldfireAngelo Dureghello1-1/+2
Update flexcan to support coldfire architecture. Any new platform should use OF, but coldfire architecture is actually not supporting devicetrees. Link: https://lore.kernel.org/r/20210702094841.327679-4-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: flexcan: add mcf5441x supportAngelo Dureghello1-20/+104
Add flexcan support for NXP ColdFire mcf5441x family. This flexcan module is quite similar to imx6 flexcan module, but with some exceptions: - 3 separate interrupt sources, MB, BOFF and ERR, - implements 16 mb only, - m68k architecture is not supporting devicetrees, so a platform data check/case has been added, - ColdFire is m68k, so big-endian cpu, with a little-endian flexcan module. Link: https://lore.kernel.org/r/20210702094841.327679-5-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to ↵Vincent Mailhol2-4/+2
increase readability The es581_tx_can_msg() does below cast: | tx_can_msg = (struct es581_4_tx_can_msg *) | &es581_4_urb_cmd->bulk_tx_can_msg.tx_can_msg_buf[msg_len - 1]; The -1 offset is to skip the first member of struct es581_4_tx_can_msg. However, es581_4_urb_cmd already has a raw_msg field which can be used instead without the use of an offset calculation. The function es58x_fd_tx_can_msg() is also modified to mirror es581_tx_can_msg(). Link: https://lore.kernel.org/r/20210628155420.1176217-7-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use sizeof and sizeof_field macros instead of constant valuesVincent Mailhol2-2/+2
Replace two constant values by a call to sizeof{,_field} on the relevant field to make the logic easier to understand. Link: https://lore.kernel.org/r/20210628155420.1176217-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: add es58x_free_netdevs() to factorize codeVincent Mailhol1-22/+24
Both es58x_probe() and es58x_disconnect() use a similar code snippet to release the netdev resources. Factorize it in an helper function named es58x_free_netdevs(). Link: https://lore.kernel.org/r/20210628155420.1176217-5-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use devm_kzalloc() to allocate device resourcesVincent Mailhol1-6/+3
Replace kzalloc() with devm_kzalloc(). By doing this, we do not need to care anymore about having to call kfree(). This result in a simpler and more easy to read code. Link: https://lore.kernel.org/r/20210628155420.1176217-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: use error pointer during device probingVincent Mailhol1-13/+10
Make es58x_init_es58x_dev return a pointer to the allocated structure instead of returning an integer. Errors are handled through the helper function ERR_PTR and IS_ERR. This slightly simplifies the code. Link: https://lore.kernel.org/r/20210628155420.1176217-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: etas_es58x: fix three typos in author name and documentationVincent Mailhol3-10/+10
Change the author name from "lastname firstname" to "firstname lastname". Fix a typo in a variable name in the documentation of struct es58x_parameters::fifo_mask. Fix a typo in the title of the datasheet (E701 -> E70) and re-indent the comments. Link: https://lore.kernel.org/r/20210628155420.1176217-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changesStephane Grosjean1-123/+43
This patch updates old code by using the can_change_state() function published since by the socket-can module. In particular, this new code better manages the change of bus state by also using the value of the error counters that the driver now systematically asks for when initializing the channel. Link: https://lore.kernel.org/r/20210715142842.35793-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_encode_msg(): add informationStephane Grosjean1-2/+4
This patch adds information by replacing a hard-coded values with its symbol and a adding comment. Link: https://lore.kernel.org/r/20210625130931.27438-5-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: PCAN-USB: add support of loopback and one-shot modeStephane Grosjean1-4/+49
The CAN - USB PCAN-USB interface is able to generate one-shot frames as well as loopback frames that it transmits starting from version 4.1 of its firmware. This patch adds support for the one-shot and loopback functionality to the driver, that can be activated if the embedded firmware allows it. If the driver detects that the PCAN-USB device runs an old firmware (< 4.1) it prints a message suggesting to contact <support@peak-system.com> for a possible firmware update. Link: https://lore.kernel.org/r/20210625130931.27438-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_usb: pcan_usb_get_device_id(): read value only in case of successStephane Grosjean1-1/+2
In case of error, reading value from response argument is useless. Link: https://lore.kernel.org/r/20210625130931.27438-2-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: Add name and FW version of the card in kernel bufferStephane Grosjean1-11/+53
This patch adds name and (possibly) firmware version information to the kernel about the detected PEAK-System CAN - PCI/PCIe interface card. Link: https://lore.kernel.org/r/20210607151720.13571-1-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> [mkl: reformated struct pci_device_id peak_pci_tbl] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: fix checkpatch warningsMarc Kleine-Budde1-2/+4
This patch cleans several checkpatch warnings in the peak_pci driver. Cc: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20210616102811.2449426-0-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: peak_pci: convert comments to network style commentsMarc Kleine-Budde1-35/+14
This patch converts all comments to network subsystem style comments. Cc: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20210616102811.2449426-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the comments style issuePeng Li1-28/+14
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Link: https://lore.kernel.org/r/1624096589-13452-9-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: remove redundant spacePeng Li1-1/+1
According to the chackpatch.pl, no space before tabs. Link: https://lore.kernel.org/r/1624096589-13452-8-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: add braces {} to all arms of the statementPeng Li1-7/+7
Braces {} should be used on all arms of this statement. Link: https://lore.kernel.org/r/1624096589-13452-7-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the alignment issuePeng Li1-11/+13
Alignment should match open parenthesis. Link: https://lore.kernel.org/r/1624096589-13452-6-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: use BIT macroPeng Li1-13/+13
This patch uses the BIT macro for setting individual bits, to fix the following checkpatch.pl issue: CHECK: Prefer using the BIT macro. Link: https://lore.kernel.org/r/1624096589-13452-5-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: fix the code style issue about macroPeng Li1-8/+8
Macros with complex values should be enclosed in parentheses Link: https://lore.kernel.org/r/1624096589-13452-4-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: add blank line after declarationsPeng Li1-0/+3
This patch fixes the checkpatch error about missing a blank line after declarations. Link: https://lore.kernel.org/r/1624096589-13452-3-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25net: at91_can: remove redundant blank linesPeng Li1-2/+0
This patch removes some redundant blank lines. Link: https://lore.kernel.org/r/1624096589-13452-2-git-send-email-huangguangbin2@huawei.com Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: at91_can: use DEVICE_ATTR_RW() helper macroZhen Lei1-5/+5
Use DEVICE_ATTR_RW() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603100233.11877-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: janz-ican3: use DEVICE_ATTR_RO/RW() helper macroZhen Lei1-12/+11
Use DEVICE_ATTR_RO/RW() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603111739.11983-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: esd_usb2: use DEVICE_ATTR_RO() helper macroZhen Lei1-6/+6
Use DEVICE_ATTR_RO() helper macro instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210603110902.11930-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: mcp251xfd_open(): request IRQ as sharedMarc Kleine-Budde1-2/+2
The driver's IRQ handler supports shared IRQs, so request a shared IRQ handler. Link: https://lore.kernel.org/r/20210724205212.737328-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: Fix header block to clarify independence from OFAndy Shevchenko1-2/+2
The driver is neither dependent on OF, nor it requires any OF headers. Fix header block to clarify independence from OF. Link: https://lore.kernel.org/r/http://lore.kernel.org/r/20210531084444.1785397-2-mkl@pengutronix.de Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from propertyAndy Shevchenko1-3/+11
In some configurations, mainly ACPI-based, the clock frequency of the device is supplied by very well established 'clock-frequency' property. Hence, try to get it from the property at last if no other providers are available. Link: https://lore.kernel.org/r/20210531084444.1785397-1-mkl@pengutronix.de Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: remove support for custom bit timingMarc Kleine-Budde2-21/+6
Since commit aee2b3ccc8a6 ("can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver") there is no use of the device specific bit timing parameters (m_can_classdev::bit_timing and struct m_can_classdev::data_timing). This patch removes the support for custom bit timing from the driver, as the common bit timing works for all known IP core implementations. Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Link: https://lore.kernel.org/r/20210616102811.2449426-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: use devm_platform_ioremap_resource_bynameYang Yingliang1-2/+1
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Link: https://lore.kernel.org/r/20210603073441.2983497-1-yangyingliang@huawei.com Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: m_can: Add support for transceiver as phyFaiz Abbas3-1/+25
Add support for implementing transceiver node as phy. The max_bitrate is obtained by getting a phy attribute. Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.de Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: netlink: remove redundant check in can_validate()Vincent Mailhol1-1/+1
can_validate() does a first check: | if (is_can_fd) { | if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING]) | return -EOPNOTSUPP; | } If that first if succeeds, we know that if is_can_fd is true then data[IFLA_CAN_BITTIMING is set. However, the next if switch does not leverage on above knowledge and redoes the check: | if (data[IFLA_CAN_DATA_BITTIMING]) { | if (!is_can_fd || !data[IFLA_CAN_BITTIMING]) | ^~~~~~~~~~~~~~~~~~~~~~~~ | return -EOPNOTSUPP; | } This patch removes that redundant check. Link: https://lore.kernel.org/r/20210603151550.140727-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: netlink: clear data_bittiming if FD is turned offVincent Mailhol1-2/+5
When the FD is turned off through the netlink interface, the data bit timing values still remain in data_bittiming and are displayed despite of the feature being disabled. Example: | $ ip link set can0 type can bitrate 500000 dbitrate 2000000 fd on | $ ip --details link show can0 | 1: can0: <NOARP,ECHO> mtu 72 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 minmtu 0 maxmtu 0 | can <FD> state STOPPED restart-ms 0 | bitrate 500000 sample-point 0.875 | tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1 | ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1 | dbitrate 2000000 dsample-point 0.750 | dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1 | ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1 | clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 | | $ ip link set can0 type can bitrate 500000 fd off | $ ip --details link show can0 | 1: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 minmtu 0 maxmtu 0 | can state STOPPED restart-ms 0 | bitrate 500000 sample-point 0.875 | tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1 | ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1 | dbitrate 2000000 dsample-point 0.750 | dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1 | ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1 | clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 Remark: once FD is turned off, it is not possible to turn fd back on and reuse the previously input data bit timing values: | $ ip link set can0 type can bitrate 500000 fd on | RTNETLINK answers: Operation not supported This means that the user will need to re-configure the data bit timing in order to turn fd on again. Because old data bit timing values cannot be reused, this patch clears priv->data_bit timing whenever FD is turned off. This way, the data bit timing variables are not displayed anymore. Link: https://lore.kernel.org/r/20210618081904.141114-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to ↵Marc Kleine-Budde3-3/+26
be called from threaded interrupt After reading all CAN frames from the controller in the IRQ handler and storing them into a skb_queue, the driver calls napi_schedule(). In the napi poll function the skb from the skb_queue are then pushed into the networking stack. However if napi_schedule() is called from a threaded IRQ handler this triggers the following error: | NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! To avoid this, create a new rx-offload function (can_rx_offload_threaded_irq_finish()) with a call to local_bh_disable()/local_bh_enable() around the napi_schedule() call. Convert all drivers that call can_rx_offload_irq_finish() from threaded IRQ context to can_rx_offload_threaded_irq_finish(). Link: https://lore.kernel.org/r/20210724204745.736053-4-mkl@pengutronix.de Suggested-by: Daniel Glöckner <dg@emlix.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule()Marc Kleine-Budde1-1/+1
Instead of calling can_rx_offload_schedule() call napi_schedule() directly. As this was the last use of can_rx_offload_schedule() remove this helper function. Link: https://lore.kernel.org/r/20210724204745.736053-3-mkl@pengutronix.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25can: rx-offload: add skb queue for use during ISRMarc Kleine-Budde5-35/+46
Adding a skb to the skb_queue in rx-offload requires to take a lock. This commit avoids this by adding an unlocked skb queue that is appended at the end of the ISR. Having one lock at the end of the ISR should be OK as the HW is empty, not about to overflow. Link: https://lore.kernel.org/r/20210724204745.736053-2-mkl@pengutronix.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Co-developed-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-25IB/mlx5: Rename is_apu_thread_cq function to is_apu_cqTal Gilboa4-4/+5
is_apu_thread_cq() used to detect CQs which are attached to APU threads. This was extended to support other elements as well, so the function was renamed to is_apu_cq(). c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't reflected when the APU support was first introduced. Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa Signed-off-by: Tal Gilboa <talgi@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-07-25octeontx2-pf: Dont enable backpressure on LBK linksHariprasad Kelam2-7/+9
Avoid configure backpressure for LBK links as they don't support it and enable lmacs before configuration pause frames. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25octeontx2-pf: Fix interface down flag on errorGeetha sowjanya2-4/+8
In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25octeontx2-af: Fix PKIND overlap between LBK and LMAC interfacesGeetha sowjanya3-4/+11
Currently PKINDs are not assigned to LBK channels. The default value of LBK_CHX_PKIND (channel to PKIND mapping) register is zero, which is resulting in a overlap of pkind between LBK and CGX LMACs. When KPU1 parser config is modified when PTP timestamping is enabled on the CGX LMAC interface it is impacting traffic on LBK interfaces as well. This patch fixes the issue by reserving the PKIND#0 for LBK devices. CGX mapped PF pkind starts from 1 and also fixes the max pkind available. Fixes: 421572175ba5 ("octeontx2-af: Support to enable/disable HW timestamping") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-24bnxt_en: Add missing periodic PHC overflow checkMichael Chan2-0/+11
We use the timecounter APIs for the 48-bit PHC and packet timestamps. We must periodically update the timecounter at roughly half the overflow interval. The overflow interval is about 78 hours, so update it every 19 hours (1/4 interval) for some extra margins. Fixes: 390862f45c85 ("bnxt_en: Get the full 48-bit hardware timestamp periodically") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-24can: mcp251xfd: mcp251xfd_irq(): stop timestamping worker in case error in IRQMarc Kleine-Budde1-0/+1
In case an error occurred in the IRQ handler, the chip status is dumped via devcoredump and all IRQs are disabled, but the chip stays powered for further analysis. The chip is in an undefined state and will not receive any CAN frames, so shut down the timestamping worker, which reads the TBC register regularly, too. This avoids any CRC read error messages if there is a communication problem with the chip. Fixes: efd8d98dfb90 ("can: mcp251xfd: add HW timestamp infrastructure") Link: https://lore.kernel.org/r/20210724155131.471303-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-24can: peak_usb: pcan_usb_handle_bus_evt(): fix reading rxerr/txerr valuesStephane Grosjean1-4/+6
This patch fixes an incorrect way of reading error counters in messages received for this purpose from the PCAN-USB interface. These messages inform about the increase or decrease of the error counters, whose values are placed in bytes 1 and 2 of the message data (not 0 and 1). Fixes: ea8b33bde76c ("can: pcan_usb: add support of rxerr/txerr counters") Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-23ionic: count csum_none when offload enabledShannon Nelson1-6/+5
Be sure to count the csum_none cases when csum offload is enabled. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ionic: fix up dim accounting for tx and rxShannon Nelson1-7/+21
We need to count the correct Tx and/or Rx packets for dynamic interrupt moderation, depending on which we're processing on the queue interrupt. Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ionic: remove intr coalesce update from napiShannon Nelson2-5/+13
Move the interrupt coalesce value update out of the napi thread and into the dim_work thread and set it only when it has actually changed. Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ionic: catch no ptp support earlierShannon Nelson2-8/+9
If PTP configuration is attempted on ports that don't support it, such as VF ports, the driver will return an error status -95, or EOPNOSUPP and print an error message enp98s0: hwstamp set failed: -95 Because some daemons can retry every few seconds, this can end up filling the dmesg log and pushing out other more useful messages. We can catch this issue earlier in our handling and return the error without a log message. Fixes: 829600ce5e4e ("ionic: add ts_config replay") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 15:47:26 +0300