summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-06-12net: qualcomm: rmnet: drop some unary NOTsAlex Elder1-7/+7
We compare a payload checksum with a pseudo checksum value for equality in rmnet_map_ipv4_dl_csum_trailer(). Both of those values are computed with a unary NOT (~) operation. The result of the comparison is the same if we omit that NOT for both values. Remove these operations in rmnet_map_ipv6_dl_csum_trailer() also. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: trailer value is a checksumAlex Elder1-3/+2
The csum_value field in the rmnet_map_dl_csum_trailer structure is a "real" Internet checksum. It is a 16 bit value, in big endian format, which represents an inverted ones' complement sum over pairs of bytes. Make that clear by changing its type to __sum16. This makes a typecast in rmnet_map_ipv4_dl_csum_trailer() and another in rmnet_map_ipv6_dl_csum_trailer() unnecessary. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: remove unneeded codeAlex Elder1-61/+14
The previous patch makes rmnet_map_ipv4_dl_csum_trailer() return early with an error if it is determined that the computed checksum for the IP payload does not match what was expected. If the computed checksum *does* match the expected value, the IP payload (i.e., the transport message), can be considered good. There is no need to do any further processing of the message. This means a big block of code is unnecessary for validating the transport checksum value, and can be removed. Make comparable changes in rmnet_map_ipv6_dl_csum_trailer(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: return earlier for bad checksumAlex Elder1-9/+27
In rmnet_map_ipv4_dl_csum_trailer(), if the sum of the trailer checksum and the pseudo checksum is non-zero, checksum validation has failed. We can return an error as soon as we know that. We can do the same thing in rmnet_map_ipv6_dl_csum_trailer(). Add some comments that explain where we're headed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: show that an intermediate sum is zeroAlex Elder1-0/+9
This patch simply demonstrates that a checksum value computed when verifying an offloaded transport checksum value for both IPv4 and IPv6 is (normally) 0. It can be squashed into the next patch. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: rearrange some NOTsAlex Elder1-2/+2
With the ones' complement arithmetic, the sum of two negated values is equal to the negation of the sum of the two original values [1]. Rearrange the calculation ip6_payload_sum using this property. [1] https://tools.ietf.org/html/rfc1071 Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: qualcomm: rmnet: remove some local variablesAlex Elder1-24/+13
In rmnet_map_ipv4_dl_csum_trailer(), remove the "csum_temp" and "addend" local variables, and simplify a few lines of code. Remove the "csum_temp", "csum_value", "ip6_hdr_csum", and "addend" local variables in rmnet_map_ipv6_dl_csum_trailer(), and simplify a few lines of code there as well. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: mhi_net: Register wwan_ops for link creationLoic Poulain2-23/+101
Register wwan_ops for link management via wwan rtnetlink. This is only basic support for now, since we only support creating one single link (link-0), but is useful to validate new wwan rtnetlink interface. For backward compatibity support, we still register a default netdev at probe time, except if 'create_default_iface' module parameter is set to false. This has been tested with iproute2 and mbimcli: $ ip link add dev wwan0-0 parentdev-name wwan0 type wwan linkid 0 $ mbimcli -p -d /dev/wwan0p2MBIM --connect apn=free $ ip link set dev wwan0-0 up $ ip addr add dev wwan0 ${IP} $ ip route replace default via ${IP} $ ping 8.8.8.8 ... Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12wwan: add interface creation supportJohannes Berg1-7/+238
Add support to create (and destroy) interfaces via a new rtnetlink kind "wwan". The responsible driver has to use the new wwan_register_ops() to make this possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12ibmvnic: fix kernel build warnings in build_hdr_descs_arrLijun Pan1-1/+2
Fix the following kernel build warnings: drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'skb' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'indir_arr' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Excess function parameter 'txbuff' description in 'build_hdr_descs_arr' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12ibmvnic: fix kernel build warningLijun Pan1-0/+4
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘adapter_state_to_string’: drivers/net/ethernet/ibm/ibmvnic.c:855:2: warning: enumeration value ‘VNIC_DOWN’ not handled in switch [-Wswitch] 855 | switch (state) { | ^~~~~~ drivers/net/ethernet/ibm/ibmvnic.c: In function ‘reset_reason_to_string’: drivers/net/ethernet/ibm/ibmvnic.c:1958:2: warning: enumeration value ‘VNIC_RESET_PASSIVE_INIT’ not handled in switch [-Wswitch] 1958 | switch (reason) { | ^~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12stmmac: intel: fix wrong kernel-docWong Vee Khee1-1/+1
Kernel-doc for intel_eth_pci_remove is incorrect, pdev datatype is struct pci_dev. Changed it to the 'pci device pointer'. Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12stmmac: intel: move definitions to dwmac-intel header fileWong Vee Khee2-16/+16
Currently some of the dwmac-intel definitions are in the header file, while some are in the driver source file. Cleaning this by moving all the definitions to the header file. Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: phylink: Add 25G BASE-R supportSteen Hegelund1-0/+5
Add 25gbase-r interface type and speed to phylink. This is needed for the Sparx5 switch. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: sfp: add support for 25G BASE-R SFPsSteen Hegelund1-0/+5
Add support for 25gbase-r modules. This is needed for the Sparx5 switch. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12ath10k: remove unused more_frags variableYang Yingliang1-2/+0
Fix the following W=1 build warning: drivers/net/wireless/ath/ath10k/htt_rx.c:1790:7: warning: variable ‘more_frags’ set but not used [-Wunused-but-set-variable] 1790 | bool more_frags; | ^~~~~~~~~~ Fixes: a1166b2653db ("ath10k: add CCMP PN replay protection for fragmented frames for PCIe") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210526142219.2542528-1-yangyingliang@huawei.com
2021-06-12wireless: carl9170: fix LEDS build errors & warningsRandy Dunlap1-5/+3
kernel test robot reports over 200 build errors and warnings that are due to this Kconfig problem when CARL9170=m, MAC80211=y, and LEDS_CLASS=m. WARNING: unmet direct dependencies detected for MAC80211_LEDS Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y]) Selected by [m]: - CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m] CARL9170_LEDS selects MAC80211_LEDS even though its kconfig dependencies are not met. This happens because 'select' does not follow any Kconfig dependency chains. Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where the latter supplies any needed dependencies on LEDS_CLASS. Fixes: 1d7e1e6b1b8ed ("carl9170: Makefile, Kconfig files and MAINTAINERS") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: linux-wireless@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org
2021-06-12ath10k: add missing error return code in ath10k_pci_probe()Yang Yingliang1-3/+9
When chip_id is not supported, the resources will be freed on path err_unsupported, these resources will also be freed when calling ath10k_pci_remove(), it will cause double free, so return -ENODEV when it doesn't support the device with wrong chip_id. Fixes: c0c378f9907c ("ath10k: remove target soc ps code") Fixes: 7505f7c3ec1d ("ath10k: create a chip revision whitelist") Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210522105822.1091848-3-yangyingliang@huawei.com
2021-06-12ath10k: go to path err_unsupported when chip id is not supportedYang Yingliang1-1/+1
When chip id is not supported, it go to path err_unsupported to print the error message. Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210522105822.1091848-2-yangyingliang@huawei.com
2021-06-12ath11k: don't call ath11k_pci_set_l1ss for WCN6855Baochen Qiang3-1/+8
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Current implementation fixed this by configuring some related regs using ath11k_pci_fix_l1ss. WCN6855 does not have this clock drift problem, so no need to set these regs. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-8-jouni@codeaurora.org
2021-06-12ath11k: add support for WCN6855Baochen Qiang4-10/+75
This patch is to add support for WCN6855. For station mode, WCN6855 is able to connect to an AP, and ping works well. For AP mode, hostapd is able to bringup an SAP interface with WCN6855, a normal station can connect to this AP and ping works well. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-7-jouni@codeaurora.org
2021-06-12ath11k: add support to get peer id for WCN6855Baochen Qiang4-4/+38
For WCN6855, the layout of hal rx mpdu info is different, so need to handle this target differently when getting peer id. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-6-jouni@codeaurora.org
2021-06-12ath11k: setup WBM_IDLE_LINK ring once againBaochen Qiang1-0/+10
For WCN6855, WBM idle link ring needs a reinit. Without this reinit, firmware crash might happen occasionally. This is requested by the hw team. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-5-jouni@codeaurora.org
2021-06-12ath11k: setup REO for WCN6855Baochen Qiang5-52/+96
WCN6855 needs a different reo configuration, so add separate handling for this target in ath11k_hw_ops. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-4-jouni@codeaurora.org
2021-06-12ath11k: add dp support for WCN6855Baochen Qiang3-0/+289
hal rx descriptor is different for WCN6855 and there are such a lot of handlers processing this descriptor in data path. So add separate handling for this target. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-3-jouni@codeaurora.org
2021-06-12ath11k: add hw reg support for WCN6855Baochen Qiang2-0/+72
Reg address of WCN6855 is different from other devices, so add separate reg definition for this target. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-2-jouni@codeaurora.org
2021-06-12ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()Pali Rohár1-0/+5
I got this crash more times during debugging of PCIe controller and crash happens somehow at the time when PCIe kernel code started link retraining (as part of ASPM code) when at the same time PCIe link went down and ath9k probably executed hw reset procedure. Currently I'm not able to reproduce this issue as it looks like to be some race condition between link training, ASPM, link down and reset path. And as always, race conditions which depends on more input parameters are hard to reproduce as it depends on precise timings. But it is clear that pointers are zero in this case and should be properly filled as same code pattern is used in ath9k_stop() function. Anyway I was able to reproduce this crash by manually triggering ath reset worker prior putting card up. I created simple patch to export reset functionality via debugfs and use it to "simulate" of triggering reset. s proved that NULL-pointer dereference issue is there. Function ath9k_hw_reset() is dereferencing chan structure pointer, so it needs to be non-NULL pointer. Function ath9k_stop() already contains code which sets ah->curchan to valid non-NULL pointer prior calling ath9k_hw_reset() function. Add same code pattern also into ath_reset_internal() function to prevent kernel NULL pointer dereference in ath9k_hw_reset() function. This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL chan structure. [ 45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 45.344417] Mem abort info: [ 45.347301] ESR = 0x96000005 [ 45.350448] EC = 0x25: DABT (current EL), IL = 32 bits [ 45.356166] SET = 0, FnV = 0 [ 45.359350] EA = 0, S1PTW = 0 [ 45.362596] Data abort info: [ 45.365756] ISV = 0, ISS = 0x00000005 [ 45.369735] CM = 0, WnR = 0 [ 45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000 [ 45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 45.388856] Internal error: Oops: 96000005 [#1] SMP [ 45.393897] Modules linked in: ath9k ath9k_common ath9k_hw [ 45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785 [ 45.414746] Workqueue: phy0 ath_reset_work [ath9k] [ 45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw] [ 45.436548] sp : ffffffc0118dbca0 [ 45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000 [ 45.445442] x27: ffffff800dee4080 x26: 0000000000000000 [ 45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000 [ 45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408 [ 45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8 [ 45.467366] x19: 0000000000000000 x18: 0000000000000000 [ 45.472846] x17: 0000000000000000 x16: 0000000000000000 [ 45.478326] x15: 0000000000000010 x14: ffffffffffffffff [ 45.483807] x13: ffffffc0918db94f x12: ffffffc011498720 [ 45.489289] x11: 0000000000000003 x10: ffffffc0114806e0 [ 45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8 [ 45.500251] x7 : c0000000ffffefff x6 : 0000000000000001 [ 45.505733] x5 : 0000000000000000 x4 : 0000000000000000 [ 45.511213] x3 : 0000000000000000 x2 : ffffff801fece870 [ 45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f [ 45.522174] Call trace: [ 45.524695] ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw] [ 45.529653] ath_reset_internal+0x1a8/0x2b8 [ath9k] [ 45.534696] ath_reset_work+0x2c/0x40 [ath9k] [ 45.539198] process_one_work+0x210/0x480 [ 45.543339] worker_thread+0x5c/0x510 [ 45.547115] kthread+0x12c/0x130 [ 45.550445] ret_from_fork+0x10/0x1c [ 45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61) [ 45.560430] ---[ end trace 566410ba90b50e8b ]--- [ 45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 45.572282] SMP: stopping secondary CPUs [ 45.576331] Kernel Offset: disabled [ 45.579924] CPU features: 0x00040002,0000200c [ 45.584416] Memory Limit: none [ 45.587564] Rebooting in 3 seconds.. Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org
2021-06-12net: ipa: introduce sysfs codeAlex Elder5-1/+164
Add IPA device attributes to expose information known by the IPA driver about the hardware and its configuration. All pointers used to display these attribute values (i.e., IPA pointer and endpoint pointers) will have been initialized by the time IPA probe has completed, so they may be safely dereferenced. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: ipa: introduce ipa_version_valid()Alex Elder1-1/+26
Define and use a new function that just validates the version defined in configuration data. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: ipa: make endpoint data validation unconditionalAlex Elder1-12/+0
The cost of validating the endpoint configuration data is not all that high, so just do it unconditionally, rather than doing so only when IPA_VALIDATAION is defined. Suggested-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11ibmvnic: fix kernel build warning in strncpyLijun Pan1-1/+1
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘handle_vpd_rsp’: drivers/net/ethernet/ibm/ibmvnic.c:4393:3: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation] 4393 | strncpy((char *)adapter->fw_version, "N/A", 3 * sizeof(char)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: dsa: sja1105: plug in support for 2500base-xVladimir Oltean3-2/+16
The MAC treats 2500base-x same as SGMII (yay for that) except that it must be set to a different speed. Extend all places that check for SGMII to also check for 2500base-x. Also add the missing 2500base-x compatibility matrix entry for SJA1110D. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: dsa: sja1105: SGMII and 2500base-x on the SJA1110 are 'special'Vladimir Oltean1-0/+2
For the xMII Mode Parameters Table to be properly configured for SGMII mode on SJA1110, we need to set the "special" bit, since SGMII is officially bitwise coded as 0b0011 in SJA1105 (decimal 3, equal to XMII_MODE_SGMII), and as 0b1011 in SJA1110 (decimal 11). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: dsa: sja1105: register the PCS MDIO bus for SJA1110Vladimir Oltean3-0/+109
On the SJA1110, the PCS of each SERDES-capable port is accessed through a different memory window which is 0x100 bytes in size, denoted by "pcs_base". In each PCS register access window, the XPCS MMDs are accessed in an indirect way: in pages/banks of up to 0x100 addresses each. Changing the page/bank is done by writing to a special register at the end of the access window. The MDIO register map accessed indirectly through the indirect banked method described above is similar to what SJA1105 has: upper 5 bits are the MMD, lower 16 bits are the MDIO address within that MMD. Since the PHY ID reported by the XPCS inside SJA1110 is also all zeroes (like SJA1105), we need to trap those reads and return a fake PHY ID so that the xpcs driver can apply some specific fixups for our integration. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: dsa: sja1105: migrate to xpcs for SGMIIVladimir Oltean6-199/+195
There is a desire to use the generic driver for the Synopsys XPCS located in drivers/net/pcs, and to achieve that, the sja1105 driver must expose an MDIO bus for the SGMII PCS, because the XPCS probes as an mdio_device. In preparation of the SJA1110 which in fact has a different access procedure for the SJA1105, we register this PCS MDIO bus once in the common code, but we implement function pointers for the read and write methods. In this patch there is a single implementation for them. There is exactly one MDIO bus for the PCS, this will contain all PCSes at MDIO addresses equal to the port number. We delete a bunch of hardware support code because the xpcs driver already does what we need. We need to hack up the MDIO reads for the PHY ID, since our XPCS instantiation returns zeroes and there are some specific fixups which need to be applied by the xpcs driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: export xpcs_do_config and xpcs_link_upVladimir Oltean1-4/+6
The sja1105 hardware has a quirk in that some changes require a switch reset, which loses all configuration. When the reset is initiated, everything needs to be reprogrammed, including the MACs and the PCS. This is currently done in sja1105_static_config_reload() - we manually call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and sja1105_sgmii_pcs_force_speed() which are all internal functions. There is a desire for sja1105 to use the common xpcs driver, and that means that the equivalents of those functions, xpcs_do_config() and xpcs_link_up() respectively, will no longer be local functions. Forcing phylink to retrigger a resolve somehow, say by doing dev_close() followed by dev_open() is not really an option, because the CPU port might have a PCS as well, and there is no net device which we can close and reopen for that. Additionally, the dev_close/dev_open sequence might force a renegotiation of the copper-side link for SGMII ports connected to a PHY, and this is undesirable as well, because the switch reset is much quicker than a PHY autoneg, so we would have a lot more downtime. The only solution I see is for the sja1105 driver to keep doing what it's doing, and that means we need to export the equivalents from xpcs for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call them directly in sja1105_static_config_reload(). This will be done during the conversion patch. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1110Vladimir Oltean3-0/+192
The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it manages it through the register space of the XPCS itself, in a small register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e. This coincides with where the registers for the default Synopsys PMA are, but the register definitions are of course not the same. This situation is an odd hardware quirk, but the simplest way to manage it is to drive the SJA1110's PMA from within the XPCS driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1105Vladimir Oltean4-3/+52
The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4. The generic code works fine, except there is an integration issue which needs to be dealt with: in this switch, the XPCS is integrated with a PMA that has the TX lane polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain normal non-inverted behavior, the TX lane polarity must be inverted in the PCS, via the DIGITAL_CONTROL_2 register. We introduce a pma_config() method in xpcs_compat which is called by the phylink_pcs_config() implementation. Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3. We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in order for the XPCS driver to recognize it. This PHY ID is added to the public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105 driver to be able to use it in a later patch). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: also ignore phy id if it's all onesVladimir Oltean1-2/+4
xpcs_get_id() searches multiple MMDs for a known PHY ID, starting with MDIO_MMD_PCS (3). However not all integrators might have implemented that MMD on their MDIO bus. For example, the NXP SJA1105 and SJA1110 switches only implement vendor-specific MMD 1 and 2. When there is nothing on an MDIO bus at a certain address, traditionally the bus returns 0xffff, which means that the bus remained in its default pull-up state for the duration of the MDIO transaction. The 0xffff value is widely used in drivers/net/phy/phy_device.c (see get_phy_c22_id for example) to denote a missing device. So it makes sense for the xpcs to ignore this value as well, and continue its search, eventually finding the proper PHY ID in the vendor-specific MMDs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for sgmii with no inband ANVladimir Oltean1-3/+38
In fixed-link use cases, the XPCS can disable the clause 37 in-band autoneg process, disable the "Automatic Speed Mode Change after CL37 AN" setting, and force operation in a speed dictated by management. Add support for this operating mode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: move register bit descriptions to a header fileVladimir Oltean2-96/+104
Vendors which integrate the Designware XPCS might modify a few things here and there, and to support those, it's best to create separate C files in order to not clutter up the main pcs-xpcs.c. Because the vendor files might want to access the common xpcs registers too, let's move them in a header file which is local to this driver and can be included by vendor files as appropriate. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: stmmac: reduce indentation when calling stmmac_xpcs_setupVladimir Oltean1-6/+4
There is no reason to embed an if within an if, we can just logically AND the two conditions. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: stmmac: reverse Christmas tree notation in stmmac_xpcs_setupVladimir Oltean1-3/+3
Reorder the variable declarations in descending line length order, according to the networking coding style. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: rename mdio_xpcs_args to dw_xpcsVladimir Oltean3-39/+38
The struct mdio_xpcs_args is reminiscent of when a similarly named struct mdio_xpcs_ops existed. Now that that is removed, we can shorten the name to dw_xpcs (dw for DesignWare). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: avoid unnecessary IPv6 byte-swappingAlex Elder1-8/+9
In the previous patch IPv4 download checksum offload code was updated to avoid unnecessary byte swapping, based on properties of the Internet checksum algorithm. This patch makes comparable changes to the IPv6 download checksum offload handling. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: avoid unnecessary byte-swappingAlex Elder1-4/+4
Internet checksums are used for IPv4 header checksum, as well as TCP segment and UDP datagram checksums. Such a checksum represents the negated sum of adjacent pairs of bytes, using ones' complement arithmetic. One property of the Internet checkum is byte order independence [1]. Specifically, the sum of byte-swapped pairs is equal to the result of byte swapping the sum of those same pairs when not byte-swapped. So for example if a, b, c, d, y, and z are hexadecimal digits, and PLUS represents ones' complement addition: If: ab PLUS cd = yz Then: ba PLUS dc = zy For this reason, there is no need to swap the order of bytes in the checksum value held in a message header, nor the one in the QMAPv4 trailer, in order to operate on them. In other words, we can determine whether the hardware-computed checksum matches the one in the message header without any byte swaps. (This patch leaves in place all existing type casts.) [1] https://tools.ietf.org/html/rfc1071 Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: clarify a bit of codeAlex Elder1-10/+16
In rmnet_map_ipv6_dl_csum_trailer() there is an especially involved line of code that determines the ones' complement sum of the IPv6 packet header (in host byte order). Simplify that by storing the result of computing just the header checksum in a local variable, then using that in the original assignment. Use the size of the IPv6 header structure as the number of bytes to checksum, rather than computing the offset to the transport header. And use ip_fast_csum() rather than ipa_compute_csum(), knowing that the size of an IPv6 header (40 bytes) is a multiple of 4 bytes greater than 16. Add some comments to match rmnet_map_ipv4_dl_csum_trailer(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: IPv4 header has zero checksumAlex Elder3-14/+29
In rmnet_map_ipv4_dl_csum_trailer(), an illegal checksum subtraction is done, subtracting hdr_csum (in host byte order) from csum_value (in network byte order). Despite being illegal, it generally works, because it turns out the value subtracted is (or should be) always 0, which has the same representation in either byte order. Doing illegal operations is not good form though, so fix this by verifying the IP header checksum early in that function. If its checksum is non-zero, the packet will be bad, so just return an error. This will cause the packet to passed to the IP layer where it can be dropped. Thereafter, there is no need subtract the IP header checksum from the checksum value in the trailer because we know it is zero. Add a comment explaining this. This type of packet error is different from other types, so add a new statistics counter to track this condition. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: simplify rmnet_map_get_csum_field()Alex Elder1-15/+5
The checksum fields of the TCP and UDP header structures already have type __sum16. We don't support any other protocol headers, so we can simplify rmnet_map_get_csum_field(), getting rid of the local variable entirely and just returning the appropriate address. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: qualcomm: rmnet: get rid of some local variablesAlex Elder1-7/+5
The value passed as an argument to rmnet_map_ipv4_ul_csum_header() is always an IPv4 header. Rather than using a local variable, just have the type of the argument reflect the proper type. In rmnet_map_ipv6_ul_csum_header() things are defined a little differently, but make the same basic change there. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 23:04:27 +0300