summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23octeontx2-af: Add LMAC channel info to NIXLF_ALLOC responseStanislaw Kardach4-0/+18
Add LMAC channel info like Rx/Tx channel base and count to NIXLF_ALLOC mailbox message response. This info is used by NIXLF attached RVU PF/VF to configure SQ's default channel, TL3_TL2_LINKX_CFG and to install MCAM rules in NPC based on matching ingress channel number. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: NPC MCAM and LDATA extract minimal configurationSunil Goutham4-0/+181
This patch adds some minimal configuration for NPC MCAM and LDATA extraction which is sufficient enough to install ucast/bcast/promiscuous forwarding rules. Below is the config done - LDATA extraction config to extract DMAC from pkt to offset 64bit in MCAM search key. - Set MCAM lookup keysize to 224bits - Set MCAM TX miss action to UCAST_DEFAULT - Set MCAM RX miss action to DROP Also inorder to have guaranteed space in MCAM to install ucast forwarding rule for each of RVU PF/VF, reserved one MCAM entry for each of NIXLF for ucast rule. And two entries for each of RVU PF. One for bcast pkt replication and other for promiscuous mode which allows all pkts received on a HW CGX/LBK channel. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Enable packet length and csum validationSunil Goutham2-0/+28
Config NPC layer info from KPU profile into protocol checker to identify outer L2/IPv4/TCP/UDP headers in a packet. And enable IPv4 checksum validation. L3/L4 and L4 CSUM validation will be enabled by PF/VF drivers by configuring NIX_AF_LF(0..127)_RX_CFG via mbox i.e 'nix_lf_alloc_req->rx_cfg' Also enable setting of NPC_RESULT_S[L2B] when an outer L2 broadcast address is detected. This will help in installing NPC MCAM rules for broadcast packets. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Support for VTAG strip and captureVamsi Attunuru4-1/+101
Added support for PF/VF drivers to configure NIX to capture and/or strip VLAN tag from ingress packets. Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Update bcast list upon NIXLF alloc/freeSunil Goutham1-0/+133
Upon NIXLF ALLOC/FREE, add or remove corresponding PF_FUNC from the broadcast packet replication list of the CGX LMAC mapped RVU PF. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Broadcast packet replication supportSunil Goutham2-0/+220
Allocate memory for mcast/bcast/mirror replication entry contexts, replication buffers (used by HW) and config HW with corresponding memory bases. Added support for installing MCEs via NIX AQ mbox. For now support is restricted to broadcast pkt replication, hence MCE table size and number of replication buffers allocated are less. Each CGX LMAC mapped RVU PF is assigned a MCE table of size 'num VFs of that PF + PF'. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Config pkind for CGX mapped PFsGeetha sowjanya7-2/+90
For each CGX LMAC that is mapped to a RVU PF, allocate a pkind and config the same in CGX. For a received packet at CGX LMAC interface this pkind is used by NPC block to start parsing of packet. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Config NPC KPU engines with parser profileSunil Goutham6-1/+385
This patch configures all 16 KPUs and iKPU (pkinds) with the KPU parser profile defined in npc_profile.h. Each KPU engine has a 128 entry CAM, only CAM entries which are listed in the profile are enabled and rest are left disabled. Also - Memory is allocated for pkind's bitmap and PFFUNC, interface channel mapping. - Added all CSR offsets of NPC HW block. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Add NPC KPU profileHao Zheng2-0/+5852
NPC block is responsible for parsing and forwarding packets to different NIXLFs. NPC has 16 KPU engines (Kangaroo parse engine) and one iKPU which represents pkinds. Each physical port either CGX/LBK is assigned a pkind and upon receiving a packet HW takes that port's pkind and starts parsing as per the KPU engines config. This patch adds header files which contain configuration profile/array for each of the iKPU and 16 KPU engines. Signed-off-by: Hao Zheng <hao.zheng@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Reset NIXLF's Rx/Tx statsVamsi Attunuru3-1/+34
This patch adds a new mailbox message to reset a NIXLF's receive and transmit HW stats. Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: NIX Tx scheduler queue config supportSunil Goutham5-5/+199
This patch adds support for a PF/VF driver to configure NIX transmit scheduler queues via mbox. Since PF/VF doesn't know the absolute HW index of the NIXLF attached to it, AF traps the register config and overwrites with the correct NIXLF index. HW supports shaping, colouring and policing of packets with these multilevel traffic scheduler queues. Instead of introducing different mbox message formats for different configurations and making both AF & PF/VF driver implementation cumbersome, access to the scheduler queue's CSRs is provided via mbox. AF checks whether the sender PF/VF has the corresponding queue allocated or not and dumps the config to HW. With a single mbox msg 20 registers can be configured. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: NIX Tx scheduler queues alloc/freeSunil Goutham4-4/+265
Added support for a PF/VF to allocate or free NIX transmit scheduler queues via mbox. For setting up pkt transmission priorities between queues, the scheduler queues have to be contiguous w.r.t their HW indices. So both contiguous and non-contiguous allocations are supported. Upon receiving NIX_TXSCH_FREE mbox msg all scheduler queues allocated to sending PFFUNC (PF/VF) will be freed. Selective free is not supported. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net/wan/fsl_ucc_hdlc: error countersMathias Thore1-7/+44
Extract error information from rx and tx buffer descriptors, and update error counters. Signed-off-by: Mathias Thore <mathias.thore@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: ena: fix compilation error in xtensa architectureArthur Kiyanovski1-0/+1
linux/prefetch.h is never explicitly included in ena_com, although functions from it, such as prefetchw(), are used throughout ena_com. This is an inclusion bug, and we fix it here by explicitly including linux/prefetch.h. The bug was exposed when the driver was compiled for the xtensa architecture. Fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Fixes: 8c590f977638 ("ena: Fix Kconfig dependency on X86") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net/mlx5: Allocate enough space for the FDB sub-namespacesDan Carpenter1-1/+1
FDB_MAX_CHAIN is three. We wanted to allocate enough memory to hold four structs but there are missing parentheses so we only allocate enough memory for three structs and the first byte of the fourth one. Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: phy: phy_support_sym_pause: Clear Asym PauseAndrew Lunn1-0/+1
When indicating the MAC supports Symmetric Pause, clear the Asymmetric Pause bit, which could of been already set is the PHY supports it. Reported-by: Labbe Corentin <clabbe@baylibre.com> Fixes: c306ad36184f ("net: ethernet: Add helper for MACs which support pause") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23qlcnic: fix a return in qlcnic_dcb_get_capability()Dan Carpenter1-1/+1
These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add enable and process hw errors of TM schedulerShiju Jose4-0/+303
This patch enables and process hw errors of TM scheduler and QCN(Quantized Congestion Control). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add enable and process hw errors from PPPShiju Jose3-0/+280
This patch enables and process hw errors from the PPP(Programmable Packet Process) block. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add enable and process hw errors from IGU, EGU and NCSIShiju Jose3-0/+207
This patch adds enable and processing of hw errors from IGU(Ingress Unit), EGU(Egress Unit) and NCSI(Network Controller Sideband Interface). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add enable and process common ecc errorsShiju Jose3-0/+318
This patch adds enable and processing of ecc errors from common HNS blocks, CMDQ(Command Queue), IMP(Integrated Management Processor) and TQP(Task Queue Pair). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add support to enable and disable hw errorsShiju Jose3-0/+32
This patch adds functions to enable and disable hw errors. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add PCIe AER error recoveryShiju Jose4-7/+35
This patch adds the error recovery for the HNS hw errors. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: hns3: Add PCIe AER callback error_detectedShiju Jose6-1/+101
Set of hw errors occurred in the HNS3 are reported to the hns3 driver through PCIe AER and RAS.The error info will be processed and appropriately recovered. This patch adds error_detected callback and error processing. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Remove set but not used variables 'devnum, is_pf'YueHaibing1-22/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/marvell/octeontx2/af/rvu.c: In function 'rvu_detach_rsrcs': drivers/net/ethernet/marvell/octeontx2/af/rvu.c:855:6: warning: variable 'devnum' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/marvell/octeontx2/af/rvu.c:853:7: warning: variable 'is_pf' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/marvell/octeontx2/af/rvu.c: In function 'rvu_mbox_handler_ATTACH_RESOURCES': drivers/net/ethernet/marvell/octeontx2/af/rvu.c:1054:7: warning: variable 'is_pf' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/marvell/octeontx2/af/rvu.c:1053:6: warning: variable 'devnum' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 746ea74241fa ("octeontx2-af: Add RVU block LF provisioning support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23octeontx2-af: Remove set but not used variable 'block'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c: In function 'rvu_npa_init': drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c:446:20: warning: variable 'block' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 7a37245ef23f ("octeontx2-af: NPA block admin queue init") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-13/+98
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-10-21 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Implement two new kind of BPF maps, that is, queue and stack map along with new peek, push and pop operations, from Mauricio. 2) Add support for MSG_PEEK flag when redirecting into an ingress psock sk_msg queue, and add a new helper bpf_msg_push_data() for insert data into the message, from John. 3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use direct packet access for __skb_buff, from Song. 4) Use more lightweight barriers for walking perf ring buffer for libbpf and perf tool as well. Also, various fixes and improvements from verifier side, from Daniel. 5) Add per-symbol visibility for DSO in libbpf and hide by default global symbols such as netlink related functions, from Andrey. 6) Two improvements to nfp's BPF offload to check vNIC capabilities in case prog is shared with multiple vNICs and to protect against mis-initializing atomic counters, from Jakub. 7) Fix for bpftool to use 4 context mode for the nfp disassembler, also from Jakub. 8) Fix a return value comparison in test_libbpf.sh and add several bpftool improvements in bash completion, documentation of bpf fs restrictions and batch mode summary print, from Quentin. 9) Fix a file resource leak in BPF selftest's load_kallsyms() helper, from Peng. 10) Fix an unused variable warning in map_lookup_and_delete_elem(), from Alexei. 11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc, from Nicolas. 12) Add missing executables to .gitignore in BPF selftests, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: phy: mdio-mux-bcm-iproc: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: wiznet: w5300: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: ti: davinci_emac: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: ti: cpsw: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: smsc: smc91x: simplify getting .driver_dataWolfram Sang1-2/+1
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: davicom: dm9000: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: cadence: macb_main: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: dsa: qca8k: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: dsa: bcm_sf2: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20r8169: add support for Byte Queue LimitsFlorian Westphal1-5/+13
This patch is basically a resubmit of 1e918876853a ("r8169: add support for Byte Queue Limits") which was reverted later. The problems causing the revert seem to have been fixed in the meantime. Only change to the original patch is that the call to netdev_reset_queue was moved to rtl8169_tx_clear. The Tested-by refers to a system using the RTL8168evl chip version. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20r8169: handle all interrupt events in the hard irq handlerHeiner Kallweit1-46/+19
Having a separate "slow event" handler isn't needed because all interrupt events trigger asynchronous activity. And in case of SYSErr we have bigger problems than performance anyway. This patch also allows to get rid of acking interrupt events in the NAPI poll callback. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: loopback: clear skb->tstamp before netif_rx()Eric Dumazet1-0/+4
At least UDP / TCP stacks can now cook skbs with a tstamp using MONOTONIC base (or arbitrary values with SCM_TXTIME) Since loopback driver does not call (directly or indirectly) skb_scrub_packet(), we need to clear skb->tstamp so that net_timestamp_check() can eventually resample the time, using ktime_get_real(). Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.") Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: ethernet: lpc_eth: add device and device node local variablesVladimir Zapolskiy1-19/+21
Trivial non-functional change added to simplify getting multiple references to device pointer in lpc_eth_drv_probe(). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: ethernet: lpc_eth: remove unused local variableVladimir Zapolskiy1-3/+0
A trivial change which removes an unused local variable, the issue is reported as a compile time warning: drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe': drivers/net/ethernet/nxp/lpc_eth.c:1250:21: warning: variable 'phydev' set but not used [-Wunused-but-set-variable] struct phy_device *phydev; ^~~~~~ Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: ethernet: lpc_eth: remove CONFIG_OF guard from the driverVladimir Zapolskiy1-3/+1
The MAC controller device is available on NXP LPC32xx platform only, and the LPC32xx platform supports OF builds only, so additional checks in the device driver are not needed. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: ethernet: lpc_eth: clean up the list of included headersVladimir Zapolskiy1-22/+6
The change removes all unnecessary included headers from the driver source code, the remaining list is sorted in alphabetical order. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net: phy: micrel: add Microchip KSZ9131 initial driverYuiko Oshino1-1/+129
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20netpoll: allow cleanup to be synchronousDebabrata Banerjee3-6/+4
This fixes a problem introduced by: commit 2cde6acd49da ("netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock") When using netconsole on a bond, __netpoll_cleanup can asynchronously recurse multiple times, each __netpoll_free_async call can result in more __netpoll_free_async's. This means there is now a race between cleanup_work queues on multiple netpoll_info's on multiple devices and the configuration of a new netpoll. For example if a netconsole is set to enable 0, reconfigured, and enable 1 immediately, this netconsole will likely not work. Given the reason for __netpoll_free_async is it can be called when rtnl is not locked, if it is locked, we should be able to execute synchronously. It appears to be locked everywhere it's called from. Generalize the design pattern from the teaming driver for current callers of __netpoll_free_async. CC: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller21-111/+117
net/sched/cls_api.c has overlapping changes to a call to nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL to the 5th argument, and another (from 'net-next') added cb->extack instead of NULL to the 6th argument. net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to code which moved (to mr_table_dump)) in 'net-next'. Thanks to David Ahern for the heads up. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19rocker: Drop pointless static qualifierYueHaibing1-2/+2
There is no need to have the 'struct rocker_desc_info *desc_info' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19qed: fix spelling mistake "transcevier" -> "transceiver"Colin Ian King1-1/+1
Trivial fix to spelling mistake in DP_INFO message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19Merge tag 'mlx5-updates-2018-10-18' of ↵David S. Miller6-90/+455
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2018-10-18 This series provides misc updates to mlx5 core and netdevice driver. 1) From Tariq Toukan: Refactor fragmented buffer struct fields and init flow. 2) From Vlad Buslov, Flow counters cache improvements and fixes follow up. as a follow up work for the previous series of the mlx5 flow counters, Vlad provides two fixes: 2.1) Take fs_counters dellist before addlist Fixes: 6e5e22839136 ("net/mlx5: Add new list to store deleted flow counters") 2.2) Remove counter from idr after removing it from list Fixes: 12d6066c3b29 ("net/mlx5: Add flow counters idr") From Shay Agroskin, 3) Add FEC set/get FW commands and FEC ethtool callbacks support 4) Add new ethtool statistics to cover errors on rx, such as FEC errors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19net-next/hinic: add checksum offload and TSO supportZhao Chen10-60/+571
This patch adds checksum offload and TSO support for the HiNIC driver. Perfomance test (Iperf) shows more than 100% improvement in TCP streams. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-25 05:51:46 +0300