summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2025-02-18wifi: ath11k: use union for vaddr and iaddr in target_mem_chunkMiaoqing Pan2-10/+16
The value of 'ab->hw_params.fixed_mem_region' determines that only one variable 'vaddr' or 'iaddr' is used in target_mem_chunk. So use an anonymous union instead, easy to check whether the memory is set or not. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240813013028.2708111-1-quic_miaoqing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-18wifi: rt2x00: Switch to use hrtimer_update_function()Nam Cao2-2/+2
The field 'function' of struct hrtimer should not be changed directly, as the write is lockless and a concurrent timer expiry might end up using the wrong function pointer. Switch to use hrtimer_update_function() which also performs runtime checks that it is safe to modify the callback. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/82dcc0eae40bb84e6452f242751c0650e79bd87e.1738746927.git.namcao@linutronix.de
2025-02-18wifi: rt2x00: Switch to use hrtimer_setup()Nam Cao1-2/+2
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. This new function replaces hrtimer_init(). However, converting this driver is not obvious: the driver calls hrtimer_init() in rt2x00dev.c, then set the hrtimer's callback function in rt2800mmio.c and rt2800usb.c. Therefore, switching to the new function is not a simple one-for-one replacement. With the lack of hardware to verify any non-trivial changes, keep it simple and calls hrtimer_setup() with hrtimer_dummy_timeout() as callback function pointer. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/f086be77528edf0dfb455af4cb984b863084a455.1738746872.git.namcao@linutronix.de
2025-02-18wifi: Switch to use hrtimer_setup()Nam Cao2-6/+4
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/71fbc442aee9a9e892e475f3bbf8f368c6692a55.1738746872.git.namcao@linutronix.de
2025-02-11wifi: ath12k: Support Received FSE StatsDinesh Karthikeyan2-0/+113
Add support to request received Finite State Entropy stats from firmware through HTT stats type 28. These stats give software and hardware FSE stats such as cache entry count, full cache count, current and peak occupancy count, pending search counts, etc. Sample output: ------------- echo 28 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_RX_FSE_STATS_TLV: === Software RX FSE STATS === Enable count = 0 Disable count = 0 Cache invalidate entry count = 0 Full cache invalidate count = 0 === Hardware RX FSE STATS === Cache hits count = 0 Cache no. of searches = 0 Cache occupancy peak count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache occupancy current count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache search square count: [0] = 0 [1-50] = 0 [51-100] = 0 [101-200] = 0 [201-255] = 0 [256] = 0 Cache search peak pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Cache search tot pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-6-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink MUMIMO Trigger StatsRoopni Devanathan2-30/+209
Add support to request uplink MUMIMO trigger stats from firmware through HTT stats type 27. These stats give information about bandwidth, RSSI of signal received, dB mean of pilots received, etc., of all users. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 27 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_MUMIMO_TRIG_STATS_TLV: mac_id = 0 rx_11ax_ul_mumimo = 0 ul_mumimo_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ..... ul_mumimo_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 ul_mumimo_rx_stbc = 0 ul_mumimo_rx_ldpc = 0 rx_ul_mumimo_rssi_in_dbm: chain0 = 0:6, 1:0, 2:0, 3:0 rx_ul_mumimo_rssi_in_dbm: chain1 = 0:0, 1:0, 2:0, 3:0 ..... rx_ul_mumimo_target_rssi: user_0 = 0:-128, 1:-128, 2:-128, 3:-128 rx_ul_mumimo_target_rssi: user_1 = 0:-128, 1:-128, 2:-128, 3:-128 ..... rx_ul_mumimo_fd_rssi: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_mumimo_fd_rssi: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... rx_ulmumimo_pilot_evm_db_mean: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_pilot_evm_db_mean: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... ul_mumimo_basic_trigger_rx_qos_null_only = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink OFDMA Trigger StatsDinesh Karthikeyan2-11/+183
Add support to request uplink trigger stats from firmware through HTT stats type 26. These stats give information about uplink OFDMA bandwidth, received RSSI, power headroom, QoS, data size, PPDU info and pass/fail info for each user. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 26 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_TRIGGER_STATS_TLV: mac_id = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 ..... HTT_RX_PDEV_UL_OFDMA_USER_STAS_TLV: rx_ulofdma_non_data_ppdu_0 = 0 rx_ulofdma_data_ppdu_0 = 0 rx_ulofdma_mpdu_ok_0 = 0 rx_ulofdma_mpdu_fail_0 = 0 rx_ulofdma_non_data_nusers_0 = 0 rx_ulofdma_data_nusers_0 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Latency StatsDinesh Karthikeyan2-0/+128
Add support to request latency stats from firmware through HTT stats type 25. These stats give information about count of transmitted and received MAC Protocol Data Units(PDU) and Service Data Units(SDU) and other latency stats. Sample output: ------------- echo 25 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_LATENCY_CTX_TLV: duration = 0 tx_msdu_cnt = 0 tx_mpdu_cnt = 0 rx_msdu_cnt = 0 rx_mpdu_cnt = 0 HTT_STATS_LATENCY_PROF_TLV: Latency name = PROF_SCH_ENQ_TQM_CMDS count = 0 minimum = 4294967295 maximum = 0 ..... HTT_STATS_LATENCY_CNT_TLV: prof_enable_cnt = 39 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Sounding StatsDinesh Karthikeyan2-0/+343
Add support to request sounding stats from firmware through HTT stats type 22. These stats give sounding information of different Wi-Fi standards, channel vector upload status and correlation details. Sample output: ------------- echo 22 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_AC_SOUNDING_STATS_TLV: ac_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ac_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_AX_SOUNDING_STATS_TLV: ax_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ax_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_BE_SOUNDING_STATS_TLV: be_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 be_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 ..... CV UPLOAD HANDLER STATS: cv_nc_mismatch_err = 0 cv_fcs_err = 0 cv_frag_idx_mismatch = 0 cv_invalid_peer_id = 0 ..... CV QUERY STATS: cv_total_query = 0 cv_total_pattern_query = 0 cv_total_bw_query = 0 cv_invalid_bw_coding = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO for single split-phy PCI deviceAaradhana Sahu3-14/+5
The single split-phy PCI device can perform multi-link operation (MLO) within its own radio, and the MLO-supporting firmware also supports MLO for split-phy PCI devices. Therefore, enable MLO for the single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-4-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Remove dependency on single_chip_mlo_support for mlo_capable flagAaradhana Sahu1-7/+2
The mlo_capable flag in structure ath12k_hw_group indicate that a device is capable of operating in multi-link mode. Currently this is enabled based on single_chip_mlo_support advertised by the firmware within ath12k_qmi_phy_cap_send(). Since the firmware advertises multi-link operation (MLO) support through the ATH12K_FW_FEATURE_MLO feature in firmware-2.bin, there is no need to rely on the QMI phy capability (single_chip_mlo_support). Therefore remove the dependency on single_chip_mlo_support to set mlo_capable flag. Below is the impact on single split-phy PCI device with and without this patch: Note: This patch does not change the existing behavior of the single split-phy PCI device. 1. Driver without this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 2. Driver without this patch + firmware with single_chip_mlo_support as true: MLO works fine. 3. Driver with this patch + firmware with single_chip_mlo_support as false: MLO is not enabled. 4. Driver with this patch + firmware with single_chip_mlo_support as true: MLO works fine. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-3-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Enable MLO setup ready and teardown commands for single ↵Aaradhana Sahu3-1/+42
split-phy device When multi-link operation(MLO) is enabled through follow-up patches in the single split-phy device, the firmware expects hardware links (hw_links) information from the driver. If driver does not send WMI multi-link setup and ready command to the firmware during MLO setup for single split-phy device, the firmware will be unaware of the hw_links component of the multi-link operation. This may lead to firmware assert during multi-link association. Therefore, enable WMI setup, ready and teardown commands for single split-phy PCI device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207050327.360987-2-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Fix locking in "QMI firmware ready" error pathsBart Van Assche1-1/+3
If ag->mutex has been locked, unlock it before returning. If it has not been locked, do not unlock it before returning. These bugs have been detected by the Clang thread-safety analyzer. Cc: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: ee146e11b4d9 ("wifi: ath12k: refactor core start based on hardware group") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250206221317.3845663-1-bvanassche@acm.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add support for MLO Multicast handling in driverBalamurugan Mahalingam5-8/+142
For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-3-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update HTT_TCL_METADATA version and bit mask definitionsBalamurugan Mahalingam2-9/+23
Update the HTT_TCL_METADATA version to the latest version (2) as the bit definitions have changed a little to support more features. This new version allows the host to submit a packet with more information to the firmware. Firmware uses this additional information to do special processing for certain frames. All the firmware binaries available in upstream/public are compatible with this HTT version update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-2-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor modeKang Yang1-2/+8
ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath11k: fix RCU stall while reaping monitor destination ringP Praneesh1-2/+2
While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241219110531.2096-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: handle link removal in change_vif_links()Aditya Kumar Singh1-3/+16
Currently, the link interface is deleted during channel unassignment, which does not align with mac80211 link handling. Therefore, add changes to only perform vdev stop during channel unassignment. The actual vdev deletion will occur in change_vif_links(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-8-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: allocate new links in change_vif_links()Aditya Kumar Singh1-0/+28
Currently, links in an interface are allocated during channel assignment via assign_vif_chanctx(). Conversely, links are deleted during channel unassignment via unassign_vif_chanctx(). However, deleting links during channel unassignment does not comply with mac80211 link handling. Therefore, this process should be managed within change_vif_links(). To maintain symmetry, link addition should also be handled in change_vif_links(). Hence, add changes to allocate link arvif in change_vif_links(). Creating the link interface on firmware will still be done during channel assignment. And since link will be created but channel might not be assigned, there is a need now to test is_created flag in ath12k_mac_mlo_get_vdev_args() before accessing link_conf or else link bring up will fail. A subsequent change will handle link removal part. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-7-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: relocate a few functions in mac.cAditya Kumar Singh1-125/+125
An upcoming change will invoke ath12k_mac_init_arvif(), ath12k_mac_assign_link_vif(), ath12k_mac_unassign_link_vif(), and ath12k_mac_remove_link_interface() from a line located above their current definition. Hence, relocate these functions to above so that these can be invoked later on. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-6-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: use arvif instead of link_conf in ath12k_mac_set_key()Aditya Kumar Singh1-13/+1
Currently, in ath12k_mac_set_key(), if sta is not present, the address is retrieved from link_conf's bssid or addr member, depending on the interface type. When operating as an ML station and during shutdown, link_conf will not be available. This can result in the following error: ath12k_pci 0004:01:00.0: unable to access bss link conf in set key for vif AA:BB:CC:DD:EE:FF link 1 The primary purpose of accessing link_conf is to obtain the address for finding the peer. However, since arvif is always valid in this call, it can be used instead. Add change to use arvif instead of link_conf. A subsequent change will expose this issue but since tear down will give error, this is included first. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-5-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: remove redundant logic for initializing arvifAditya Kumar Singh1-31/+49
The current logic for initializing arvif is present in both the add interface operation callback and ath12k_mac_assign_link_vif(). The former handles deflink initialization, while the latter is responsible for other links. This redundancy could be avoided by using a common helper function. Hence, add a new helper ath12k_mac_init_arvif() which initializes a given arvif. Since synchronizing rcu is not required after adding a rcu pointer, remove that now. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-4-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: remove redundant vif settings during link interface creationAditya Kumar Singh1-7/+0
Currently, vif level settings are done in ath12k_mac_assign_link_vif() as well as in ath12k_mac_op_add_interface(). Since it is vif level settings, doing this on per link does not make sense and it contributes to redundant code. Get rid of this redundant code from ath12k_mac_assign_link_vif(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-3-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: introduce ath12k_generic_dbg()Aditya Kumar Singh2-1/+7
There might be instances where ath12k_dbg() is needed, but access to struct ath12k_base (ab) is not readily available. To address this, add support to print the debug message using printk() when ab is not present. To avoid the need to explicitly pass NULL each time, introduce a new macro ath12k_generic_dbg() which resolves to ath12k_dbg() with ab set to NULL. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-2-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: eliminate redundant debug mask check in ath12k_dbg()Aditya Kumar Singh2-5/+4
The current implementation includes a debug mask check both in the macro expansion and in the function __ath12k_dbg(), which is unnecessary. Simplify the code by removing the redundant check from the helper function __ath12k_dbg(). While at this, rename the first argument in macro from ar to ab since the first argument name in the function __ath12k_dbg() is ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1.97421.5 # Nicolas Escande Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250204-unlink_link_arvif_from_chanctx-v2-1-764fb5973c1a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add peer extended Rx statistics debugfs supportKarthikeyan Periyasamy9-11/+497
Currently, peer extended Rx statistics are not supported. Therefore, expose peer extended Rx statistics support through debugfs, allowing users to enable or disable the collection of statistics information. After that the statistics information can be dumped through debugfs. Below are the debugfs commands exposed. Enable/Disable: echo <1/0> > /sys/kernel/debug/ieee80211/phyX/ath12k/ext_rx_stats Dump: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/<peer MAC addr>/rx_stats Sample output: ============== RX peer stats: Num of MSDUs: 1087 Num of MSDUs with TCP L4: 0 Num of MSDUs with UDP L4: 13 Num of other MSDUs: 1074 Num of MSDUs part of AMPDU: 363 Num of MSDUs not part of AMPDU: 724 Num of MSDUs using STBC: 0 Num of MSDUs beamformed: 0 Num of MPDUs with FCS ok: 695 Num of MPDUs with FCS error: 0 preamble: 11A 395 11B 0 11N 0 11AC 0 11AX 692 11BE 0 reception type: SU 1087 MU_MIMO 0 MU_OFDMA 0 MU_OFDMA_MIMO 0 TID(0-15) Legacy TID(16):690 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 395 RX Duration:39537 DCM: 0 RU26: 0 RU52: 0 RU106: 0 RU242: 0 RU484: 0 RU996: 0 RX success packet stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 1 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 66 MCS 7: 46 MCS 8: 46 MCS 9: 34 MCS 10: 28 MCS 11: 471 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 395 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 1086 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 396 1.6 us 691 3.2 us 0 BW: 20 MHz 785 40 MHz 2 80 MHz 300 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:5 7:3 8:3 9:4 10:4 11:374 12:391 40 Mhz gi 1 us 1x1 : 12:2 80 Mhz gi 1 us 1x1 : 6:61 7:43 8:43 9:30 10:24 11:97 12:2 RX success byte stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 41 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 1435 MCS 7: 943 MCS 8: 697 MCS 9: 533 MCS 10: 492 MCS 11: 8159 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 16195 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 28454 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 16236 1.6 us 12259 3.2 us 0 BW: 20 MHz 24108 40 MHz 82 80 MHz 4305 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:205 7:123 8:123 9:164 10:164 11:7257 12:16031 40 Mhz gi 1 us 1x1 : 12:82 80 Mhz gi 1 us 1x1 : 6:1230 7:820 8:574 9:369 10:328 11:902 12:82 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-10-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Refactor the format of peer rate table informationBalamurugan Mahalingam2-21/+14
Currently, peer rate table information involves complex computation for the rate index to update the rate table. To simplify this process, avoid the rate index calculation by defining the rate table with bandwidth, GI, NSS, MCS. Therefore, update the rate information based on the bandwidth, GI, NSS and MCS information from the TLV data of monitor status Rx path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-9-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add EHT MCS support in Extended Rx statisticsBalamurugan Mahalingam2-0/+8
Currently, EHT MCS information is not populated. Therefore, add the EHT MCS counter array to the peer rate statistics and update the EHT MCS statistics from the status TLV data in the monitor Rx path. In the future, this information will be used in the peer extended Rx statistics dump. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-8-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: fix the ampdu id fetch in the HAL_RX_MPDU_START TLVP Praneesh2-7/+12
Currently, ampdu id is update with peer id mask which is incorrect. Therefore, update the ampdu id with PPDU id mask value. Also move the ampdu_id field inside the user stats since it is a user id based statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update the peer id in PPDU end user stats TLVKarthikeyan Periyasamy1-0/+3
Currently, peer id get reported in the PPDU end user TLV tag. But the monitor status handler is inherited from ath11k, but it was not updated to incorporate the changes made to ath12k 802.11be hardware architecture. Therefore, update the peer id from the PPDU end user TLV data to get latest peer id update, it helps to populate accurate peer information on the statistics data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-6-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_OTHER_RECEIVE_INFO TLV parsing supportKarthikeyan Periyasamy2-0/+15
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_OTHER_RECEIVE_INFO TLV parsing support in the monitor Rx path, which helps to populate the extended Rx statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-5-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_RX_PPDU_START_USER_INFO TLV parsing supportKarthikeyan Periyasamy3-56/+551
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add necessary HAL_RX_PPDU_START_USER_INFO TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-4-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_GENERIC_EHT_SIG TLV parsing supportKarthikeyan Periyasamy2-46/+638
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_GENERIC_EHT_SIG TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-3-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add HAL_PHYRX_GENERIC_U_SIG TLV parsing supportKarthikeyan Periyasamy2-1/+264
Currently, monitor is not enabled. However, in the future, the monitor will be enabled. Therefore, add the necessary HAL_PHYRX_GENERIC_U_SIG TLV parsing support in monitor Rx path, which help to populate the EHT radiotap data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-2-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: add support of station average signal strengthNicolas Escande3-0/+14
This adds support for reporting to the kernel the average rssi. This is done the same way as it was done in ath11k. A simple ewma (with the same parameters) is updated with each rssi update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250201211301.357985-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11Merge tag 'rtw-next-2025-02-10-v2' of https://github.com/pkshih/rtwJohannes Berg51-3438/+4471
Ping-Ke says: ==================== rtw-next patches for v6.15 Major changes are listed below: rtw88: * preparation to support RTL8814AU rtw89: * switch using wiphy_lock and wiphy_work * add BB context to manipulate two PHY as preparation of MLO * improve BT-coexistence mechanism to play A2DP smoothly * firmware file can contain regd table ==================== Link: https://lore.kernel.org/linux-wireless/b65fae15-79bf-40fa-8acc-63d87ae35e19@RTEXMBS04.realtek.com.tw/ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: Fix A-MSDU TSO preparationIlan Peer3-12/+18
The TSO preparation assumed that the skb head contained the headers while the rest of the data was in the fragments. Since this is not always true, e.g., it is possible that the data was linearised, modify the TSO preparation to start the data processing after the network headers. Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.75769a4769bf.Iaf79e8538093cdf8c446c292cc96164ad6498f61@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: Free pages allocated when failing to build A-MSDUIlan Peer1-0/+1
When failing to prepare the data needed for A-MSDU transmission, the memory allocated for the TSO management was not freed. Fix it. Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.bc27fad9b3d5.Ibf43dd18fb652b1a59061204e081f11c9fa34a3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: limit printed string from FW fileJohannes Berg1-1/+1
There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have. Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: use the right version of the rate APIEmmanuel Grumbach1-4/+4
The firmware uses the newer version of the API in recent devices. For older devices, we translate the rate to the new format. Don't parse the rate with old parsing macros. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.13d70cdcbb4e.Ic92193bce4013b70a823cfef250ee79c16cf7c17@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: don't try to talk to a dead firmwareEmmanuel Grumbach1-0/+7
This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command. Fixes: 268712dc3b34 ("wifi: iwlwifi: mvm: add a debugfs hook to clear the monitor data") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.8e1597b62c70.I12ea71dd9b805b095c9fc12a10c9f34a4e801b61@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspendEmmanuel Grumbach1-26/+51
This is not really a firmware error. We need to reload the firmware, but this doesn't mean that we should consider this as a firmware error. When the firmware was restarted upon resume, this wasn't felt by the driver. Now that we keep the firmware running during suspend even if we don't have wowlan, this started to pop-up. Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.a10463a40318.I14131781c3124b58e60e1f5e9d793a2bc88b464c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: mvm: clean up ROC on failureJohannes Berg1-0/+2
If the firmware fails to start the session protection, then we do call iwl_mvm_roc_finished() here, but that won't do anything at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set. Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path. If it started successfully before, it's already set, so that doesn't matter, and if it didn't start it needs to be set to clean up. Not doing so will lead to a WARN_ON() later on a fresh remain- on-channel, since the link is already active when activated as it was never deactivated. Fixes: 35c1bbd93c4e ("wifi: iwlwifi: mvm: remove IWL_MVM_STATUS_NEED_FLUSH_P2P") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.0fe36c291068.I67f5dac742170dd937f11e4d4f937f45f71b7cb4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: fw: avoid using an uninitialized variableMiri Korenblit1-0/+3
iwl_fwrt_read_err_table can return true also when it failed to read the memory. In this case, err_id argument is not initialized, but the callers are still using it. Simply initialize it to 0. If the error table was read successfully it'll be overridden. Fixes: 43e0b2ada519 ("wifi: iwlwifi: fw: add an error table status getter") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250209143303.37cdbba4eb56.I95fe9bd95303b8179f946766558a9f15f4fe254c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: fw: allocate chained SG tables for dumpJohannes Berg1-28/+58
The firmware dumps can be pretty big, and since we use single pages for each SG table entry, even the table itself may end up being an order-5 allocation. Build chained tables so that we need not allocate a higher-order table here. This could be improved and cleaned up, e.g. by using the SG pool code or simply kvmalloc(), but all of that would require also updating the devcoredump first since that frees it all, so we need to be more careful. SG pool might also run against the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant here. Also use _devcd_free_sgtable() for the error paths now, much simpler especially since it's in two places now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: implement dump region splitJohannes Berg4-28/+85
Due to hardware design constraints, a reset handshake may be necessary even when the firmware has already crashed, with the dump descriptions indicating which parts should be done before/after the handshake, if needed. Implement that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.9296e3113d42.Ifb32703fd06a644d08a86b7af1b990738e3c8134@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: add twt operation cmdShaul Triebitz1-1/+84
Add the firmware API. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.50a9f7bebe4c.I15ac1361fdab547dbf680a6fa6e88fdc5b177082@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: use correct IMR dump variableJohannes Berg1-2/+2
We shouldn't dump the reg_data here which dumps the last entry again, it should use the imr_reg_data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.3313b18667d1.Iaa9ab66b1d397912a573525e060d39ea01b29d19@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: support ROC version 6Shaul Triebitz3-7/+265
Version 6 added ROC with multi repetitions. We don't use it, but need to update the command length. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.956c33729d48.I609835c08f0003c084a13a1e1e505cb7bc8ecbc6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: clarify the meaning of IWL_INIT_PHYEmmanuel Grumbach1-2/+2
This is a bit that tells the firmware to wait for the PHY_CONFIGURATION_CMD before completing its init sequence. Clarify this in the comment. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.097510347ae2.Ica00b4b30163a21bf993fa968dd406ee4023fc9e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 12:06:52 +0300