summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2024-11-18wifi: rtw88: 8821au: Add additional devices to the USB_DEVICE listLarry Finger1-1/+51
These are the entries that Nick Morrow provided. From https://github.com/morrownr/8821au-20210708 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/da05b866-a9ff-428c-a008-35e8cf200a98@gmail.com
2024-11-14Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski187-1893/+15593
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13wifi: ath11k: Fix unexpected return buffer manager error for WCN6750/WCN6855Balaji Pothunoori2-1/+3
The following error messages were encountered while parsing fragmented RX packets for WCN6750/WCN6855: ath11k 17a10040.wifi: invalid return buffer manager 4 This issue arose due to a hardcoded check for HAL_RX_BUF_RBM_SW3_BM introduced in 'commit 71c748b5e01e ("ath11k: Fix unexpected return buffer manager error for QCA6390")' For WCN6750 and WCN6855, the return buffer manager ID should be HAL_RX_BUF_RBM_SW1_BM. The incorrect conditional check caused fragmented packets to be dropped, resulting in the above error log. Fix this by adding a check for HAL_RX_BUF_RBM_SW1_BM. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00258-QCAMSLSWPL-1 Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 Fixes: 71c748b5e01e ("ath11k: Fix unexpected return buffer manager error for QCA6390") Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241030114625.2416942-1-quic_bpothuno@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-13wifi: ath12k: Fix for out-of bound access errorKarol Przybylski1-2/+3
Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758 Signed-off-by: Karol Przybylski <karprzy7@gmail.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105101132.374372-1-karprzy7@gmail.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-13wifi: ath9k: miscellaneous spelling fixesDmitry Antipov15-19/+19
Correct spelling here and there as suggested by codespell. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20241111104724.484586-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-12Revert "wifi: iwlegacy: do not skip frames with bad FCS"Kalle Valo2-2/+2
This reverts commit 02b682d54598f61cbb7dbb14d98ec1801112b878. Alf reports that this commit causes the connection to eventually die on iwl4965. The reason is that rx_status.flag is zeroed after RX_FLAG_FAILED_FCS_CRC is set and mac80211 doesn't know the received frame is corrupted. Fixes: 02b682d54598 ("wifi: iwlegacy: do not skip frames with bad FCS") Reported-by: Alf Marius <post@alfmarius.net> Closes: https://lore.kernel.org/r/60f752e8-787e-44a8-92ae-48bdfc9b43e7@app.fastmail.com/ Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241112142419.1023743-1-kvalo@kernel.org
2024-11-11wifi: brcmfmac: Fix oops due to NULL pointer dereference in ↵Norbert van Bolhuis1-1/+1
brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory. Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
2024-11-11wifi: Switch back to struct platform_driver::remove()Uwe Kleine-König12-31/+31
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/wireless to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. En passant several whitespace changes are done to make indentation consistent in the struct initializers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
2024-11-11wifi: ipw2x00: libipw_rx_any(): fix bad alignmentJiapeng Chong1-4/+4
This patch fixes incorrect code alignment. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
2024-11-11wifi: brcmfmac: release 'root' node in all execution pathsJavier Carrasco1-2/+1
The fixed patch introduced an additional condition to enter the scope where the 'root' device_node is released (!settings->board_type, currently 'err'), which avoid decrementing the refcount with a call to of_node_put() if that second condition is not satisfied. Move the call to of_node_put() to the point where 'root' is no longer required to avoid leaking the resource if err is not zero. Cc: stable@vger.kernel.org Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
2024-11-11Merge tag 'rtw-next-2024-11-06' of https://github.com/pkshih/rtwKalle Valo84-500/+11390
rtw-next patches for v6.13 Major changes are listed: rtw88: - support two USB adapters 8821au and 8812au rtw89: - add thermal protection - fine tune BT-coexsitence to improve user experience - firmware secure boot for WiFi 6 chip - more materials for MLO
2024-11-07wifi: iwlwifi: mvm: don't call power_update_mac in fast suspendEmmanuel Grumbach1-2/+0
We don't have any interface anyway. Trying to send a command after the D3_CONFIG command is also a really bad idea. No harm done since this function wouldn't send anything to the firmware anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.2636b358c870.I36717b4cff98eaa79182e0f3b5404f71aeeaf2f9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STAMiri Korenblit17-77/+77
This is not mvm specific Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.acb45e8c4a78.I58736fd85d82a1fe641e75037b77878854a91e50@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: bump minimum API version in BZ/SC to 92Miri Korenblit2-2/+2
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.525fe67393b6.Idbb031cf68d04b7c0c2b9fbc7d79181c538994f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.hMiri Korenblit2-2/+3
Those macros are currently in fw/api/binding.h, which should really not be included in newer code, where this API is not used. Just move it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241028135215.48443f1c1819.I1cfe8c6c58153031d44f81edc0f8731077666355@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: be less noisy if the NIC is dead in S3Emmanuel Grumbach4-14/+30
If the NIC is dead upon resume, try to catch the error earlier and exit earlier. We'll print less error messages and get to the same recovery path as before: reload the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.3a18682261e5.I18f336a4537378a4c1a8537d7246cee1fc82b42c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: tell iwlmei when we finished suspendingEmmanuel Grumbach1-2/+6
Since we no longer shut down the device in suspend, we also no longer call iwl_mvm_mei_device_state() and this is a problem because iwlmei expects this to be called when it runs its own suspend sequence. It checks mei->device_down in iwl_mei_remove() which is called upon suspend. Fix this by telling iwlmei when we're done accessing the device. When we'll wake up, the device should be untouched if CSME didn't use it during the suspend time. If CSME used it, we'll notice it through the CSR_FUNC_SCRATCH register. Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.525287b90af2.Ibf183824471ea5580d9276d104444e53191e6900@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: allow fast resume on ax200Emmanuel Grumbach1-1/+1
This feature can be used on ax200 as well. It'll avoid to restart the firmware upon suspend / resume flow. Doing so also avoids releasing and re-allocating all the device related memory which makes the memory's subsystem task easier. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.514efe0ce4c7.I60061277526302a75cadbba10452e94c54763f13@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: support new initiator and responder command versionAvraham Stern3-1/+7
Add support for range_request_cmd version 15. This version adds a testing option flag to use bad secure LTF Tx key. The command struct itself is not changed. Add support for responder config command version 11. This version only adds a flag which is part of the MVM_FTM_RESP_FLAGS and does not require any special handling. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.264826832f16.Iad4fdcd177a9c4bcb0839d3f87c793b4f83eb2c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latencyJohannes Berg1-9/+55
This will call into the OMI control path soon, and that will require the wiphy mutex to be held. The files are removed by mac80211 under wiphy mutex, so we must use the wiphy-locked debugfs for them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.c62e23392400.Ifcb652d324bc60b7144fdf277d7989bede9e54d5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: MLO scan upon channel condition degradationEmmanuel Grumbach4-2/+15
This will allow to prevent disconnections. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.6402718fbc94.Ia6ce651cc7c96f7aaeee449737dd28ed291788a6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: support new versions of the wowlan APIsEmmanuel Grumbach4-23/+171
Add support version 7 of wowlan_config_cmd and version 5 of iwl_wowlan_info_notif This version is mainly a cleanup of the previous version. Two fields were removed as the device already handled this data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.d2afdf720073.I9901c8c4ad4508135d019efa213b1430acc70746@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()Johannes Berg1-3/+1
Allow calling iwl_mvm_get_bss_vif() without getting an error message if multiple vifs are active etc., this is much easier than having to check beforehand (which would be effectively the same code as the function itself.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.a343824e2c61.Ib92534f17c63630aa2eb0604fd80dbae20077487@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: unify link info initializationJohannes Berg4-16/+15
Move the link info initialization to a common function so that it can be modified more easily later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.ab963cc90e56.Ice5cf66dec8351f8e94ca4c5b3a27e9311d0c20a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: clarify fw_id_to_link_sta protectionJohannes Berg4-0/+16
This is written only with wiphy and mvm mutexes held, but in order to actually rely on that document it and add lockdep assertions to ensure it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.a6c6aa4147cf.If7f1b30a7b92ce5e9226e8972201a20aa9905108@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07_RESEND_PATCH_v2_04_19_wifi_rt2x00_Remove_redundant_hrtimer_init_Nam Cao1-2/+0
rt2x00usb_probe() executes a hrtimer_init() for txstatus_timer. Afterwards, rt2x00lib_probe_dev() is called which also initializes this txstatus_timer with the same settings. Remove the redundant hrtimer_init() call in rt2x00usb_probe(). Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/all/66116057f788e18a6603d50a554417eee459e02c.1730386209.git.namcao@linutronix.de
2024-11-06wifi: ath12k: Add MLO peer assoc command supportSriram R4-6/+188
Add changes to send MLO peer assoc command with partner link details and primary umac details. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: add helper to find multi-link stationSriram R2-0/+21
Multi-link stations are identified in driver using the multi-link peer id and they have ATH12K_PEER_ML_ID_VALID bit set in the id. Add a helper to find multi-link station using the multi-link peer id. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: add multi-link flag in peer create commandSriram R3-6/+32
Driver should indicate to firmware whether a peer is multi-link or not in peer create command using multi-link flag. Add changes to support WMI_TAG_MLO_PEER_CREATE_PARAMS in WMI_PEER_CREATE_CMDID. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: Add helpers for multi link peer creation and deletionSriram R4-0/+121
Add helper functions for multi link peer addition and deletion. And add address validation to ensure we are not creating link peers (belonging to different clients) with same MLD address. To aid in this validation for faster lookup, add a new list of ML peers to struct ath12k_hw::ml_peers and use the same for parsing for the above address validation use cases. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: introduce ath12k_hw_warn()Kalle Valo4-4/+11
In the following patch we need to use ath12k_warn() but don't easily have access to struct ath12k_base (ab) but do have access to struct ath12k_hw (ah). So add a new warning helper ath12_hw_warn() which takes the latter but the log output is still identical but uses the struct device pointer stored to struct ath12k_hw. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: Refactor sta state machineSriram R2-102/+244
Refactor ath12k_mac_op_sta_state(), with generic wrappers which can be used for both multi link stations and non-ML stations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: MLO vdev bringup changesSriram R3-5/+230
Add changes to add the link vdevs dynamically whenever a channel is assigned from mac80211 for a link vdev. During vdev create, update ML address of the vdev to firmware using the new WMI parameter (WMI_TAG_MLO_VDEV_CREATE_PARAMS). During vdev start, notify the firmware that this link vdev is newly added and also indicate all its known partners so that the firmware can take necessary actions to internally update the partners on the new link being added. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: ath12k_mac_vdev_create(): use goto for error handlingKalle Valo1-2/+1
In commit 477cabfdb776 ("wifi: ath12k: modify link arvif creation and removal for MLO") I had accidentally left one personal TODO comment about using goto instead of ret. Switch to use goto to be consistent with the error handling in the function. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: mark QMI driver event helpers as noinlineJeff Johnson1-9/+25
As described in [1], compiling the ath12k driver using clang with KASAN enabled warns about some functions with excessive stack usage, with the worst case being: drivers/net/wireless/ath/ath12k/qmi.c:3546:13: warning: stack frame size (2456) exceeds limit (1024) in 'ath12k_qmi_driver_event_work' [-Wframe-larger-than] Nathan [2] highlighted work done by Arnd [3] to address similar issues in other portions of the kernel. ath12k_qmi_driver_event_work() itself is a pretty lightweight function, but it dispatches to several other functions which do the real work: ath12k_qmi_driver_event_work() ath12k_qmi_event_server_arrive() ath12k_qmi_host_cap_send() ath12k_qmi_event_mem_request() ath12k_qmi_respond_fw_mem_request() ath12k_qmi_event_load_bdf() ath12k_qmi_request_target_cap() ath12k_qmi_load_bdf_qmi() ath12k_qmi_wlanfw_m3_info_send() Mark all of those underlying functions as 'noinline_for_stack' to prevent them from being inlined in ath12k_qmi_driver_event_work(), thereby eliminating the excessive stack usage. Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1] Link: https://msgid.link/20241025223321.GA3647469@thelio-3990X # [2] Link: https://lore.kernel.org/all/?q=f:arnd@kernel.org+Wframe-larger-than # [3] Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath11k: Suspend hardware before firmware mode off for WCN6750Balaji Pothunoori2-0/+46
During rmmod, the ath11k host driver sends a QMI MODE OFF command to firmware. As part of this command, firmware initiates WLAN de-initialization and accesses certain UMAC registers during this process. Currently, on WCN6750 WLAN hardware, the system is in a sleep state when firmware receives the QMI MODE OFF command. This results in a firmware/hardware reset while accessing the UMAC hardware registers during sleep state. To avoid this, add logic to send WCN6750 hardware specific WMI_PDEV_SUSPEND_AND_DISABLE_INTR command to firmware prior to sending the QMI MODE OFF command. This will cause firmware to cease all activities and put the device in a powered-on state that prevents access to registers which have been powered off. Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241029083340.3010798-1-quic_bpothuno@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: rtlwifi: Remove some exhalbtc deadcodeDr. David Alan Gilbert4-101/+0
exhalbtc_rf_status_notify(), exhalbtc_coex_dm_switch() and exhalbtc_antenna_detection() are unused since they were added in 2017's commit 7937f02d1953 ("rtlwifi: btcoex: hook external functions for newer chips") Remove them. This leaves ex_btc8723b1ant_coex_dm_reset() unused. Remove it. exhalbtc_dbg_control(), exhalbtc_stack_update_profile_info(), exhalbtc_set_hci_version(), and exhalbtc_set_bt_patch_version() are unused since their addition in 2014 by commit aa45a673b291 ("rtlwifi: btcoexist: Add new mini driver") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241104144331.29262-1-linux@treblig.org
2024-11-06wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failuresGuilherme G. Piccoli1-1/+10
Syzkaller reported a hung task with uevent_show() on stack trace. That specific issue was addressed by another commit [0], but even with that fix applied (for example, running v6.12-rc5) we face another type of hung task that comes from the same reproducer [1]. By investigating that, we could narrow it to the following path: (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and dummy_hcd infrastructure. (b) During the probe of rtl8192cu, the driver ends-up performing an efuse read procedure (which is related to EEPROM load IIUC), and here lies the issue: the function read_efuse() calls read_efuse_byte() many times, as loop iterations depending on the efuse size (in our example, 512 in total). This procedure for reading efuse bytes relies in a loop that performs an I/O read up to *10k* times in case of failures. We measured the time of the loop inside read_efuse_byte() alone, and in this reproducer (which involves the dummy_hcd emulation layer), it takes 15 seconds each. As a consequence, we have the driver stuck in its probe routine for big time, exposing a stack trace like below if we attempt to reboot the system, for example: task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000 Workqueue: usb_hub_wq hub_event Call Trace: __schedule+0xe22/0xeb6 schedule_timeout+0xe7/0x132 __wait_for_common+0xb5/0x12e usb_start_wait_urb+0xc5/0x1ef ? usb_alloc_urb+0x95/0xa4 usb_control_msg+0xff/0x184 _usbctrl_vendorreq_sync+0xa0/0x161 _usb_read_sync+0xb3/0xc5 read_efuse_byte+0x13c/0x146 read_efuse+0x351/0x5f0 efuse_read_all_map+0x42/0x52 rtl_efuse_shadow_map_update+0x60/0xef rtl_get_hwinfo+0x5d/0x1c2 rtl92cu_read_eeprom_info+0x10a/0x8d5 ? rtl92c_read_chip_version+0x14f/0x17e rtl_usb_probe+0x323/0x851 usb_probe_interface+0x278/0x34b really_probe+0x202/0x4a4 __driver_probe_device+0x166/0x1b2 driver_probe_device+0x2f/0xd8 [...] We propose hereby to drastically reduce the attempts of doing the I/O reads in case of failures, restricted to USB devices (given that they're inherently slower than PCIe ones). By retrying up to 10 times (instead of 10000), we got reponsiveness in the reproducer, while seems reasonable to believe that there's no sane USB device implementation in the field requiring this amount of retries at every I/O read in order to properly work. Based on that assumption, it'd be good to have it backported to stable but maybe not since driver implementation (the 10k number comes from day 0), perhaps up to 6.x series makes sense. [0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race") [1] A note about that: this syzkaller report presents multiple reproducers that differs by the type of emulated USB device. For this specific case, check the entry from 2024/08/08 06:23 in the list of crashes; the C repro is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000. Cc: stable@vger.kernel.org # v6.1+ Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com
2024-11-06wifi: rtw88: Enable the new RTL8821AU/RTL8812AU driversBitterblue Smith2-0/+48
These are older Wifi 5 chips. RTL8821AU is 1x1, with or without Bluetooth. RTL8812AU is 2x2, without Bluetooth. Beamforming is not implemented. It looks like these chips need a different implementation than what is in bf.c. Speed tests with RTL8821AU: 137 Mbps download, 144 Mbps upload. Speed tests with RTL8812AU: 344 Mbps download, 387 Mbps upload. Station mode and AP mode were tested. Bluetooth coexistence works. I used my Bluetooth headphones for several days, listening to music and watching videos. There is only a problem with the wifi speeds with one router: With ISP's HG6544C router: Official driver: 3/5 Mbps. rtw88: a bit more, but not steady at all. Not enough to watch a 1080p Youtube video. With my D-Link Eagle R32 router running Openwrt, on the same channel: Official driver: 6/10 Mbps. rtw88: download starts around 30, climbs to 50 / upload is 10 Mbps. I can watch a 1080p Youtube video. The music doesn't cut out during any speed tests. I also tested transferring files to and from my phone. I don't have other types of Bluetooth devices to test. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/0b8e8093-8103-4999-86bf-0055ec52ea64@gmail.com
2024-11-06wifi: rtw88: Add rtw8821au.c and rtw8812au.cBitterblue Smith2-0/+56
These are the entry points for the new modules rtw88_8821au (RTL8821AU/RTL8811AU) and rtw88_8812au (RTL8812AU). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/91c495f8-a607-429b-8bc0-5a45d3c1393e@gmail.com
2024-11-06wifi: rtw88: Add rtw8812a.{c,h}Bitterblue Smith2-0/+1112
These contain code specific to RTL8812AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/a0057683-79eb-4ab2-8f74-11a3bc58adfb@gmail.com
2024-11-06wifi: rtw88: Add rtw8821a.{c,h}Bitterblue Smith2-0/+1207
These contain code specific to RTL8821AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/37218648-ada7-4fad-b7bd-d2aee28cefb9@gmail.com
2024-11-06wifi: rtw88: Add rtw88xxa.{c,h}Bitterblue Smith2-0/+2164
These contain code shared by both RTL8821AU and RTL8812AU chips. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/b8590382-a954-412d-a96b-63e360b97acc@gmail.com
2024-11-06wifi: rtw88: Add rtw8821a_table.{c,h}Bitterblue Smith2-0/+2371
These contain various arrays for initialising RTL8821AU. Also TX power limits. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/087c7260-fcc3-4e22-886b-ac477cad9198@gmail.com
2024-11-06wifi: rtw88: Add rtw8812a_table.{c,h}Bitterblue Smith2-0/+2838
These contain various arrays for initialising RTL8812AU. Also TX power limits. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/086f476c-e832-4867-963c-a64a63252fd6@gmail.com
2024-11-06wifi: rtw89: coex: set higher priority to BT when WL scan and BT A2DP existChing-Te Ku1-1/+5
If WiFi operation channel & scan channel both at 2.4GHz, original will keep going at WL > BT priority table for a long time. It makes A2DP can not sent audio data to SUT device in time then performed a lag audio. Assign a BT > WL priority table when A2DP exist, to avoid the issue. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241031023032.7102-1-pkshih@realtek.com
2024-11-06wifi: rtw89: 8852b: change RF mode to normal mode when set channelChih-Kang Chang1-5/+3
Set the RF mode from 0xA(low power mode) to 0x3(Normal mode) to avoid abnormal TX waveform in OFDM rate. Originally the RF mode will be changed to normal mode by the firmware after entering LPS once. Therefore, this change does not affect power saving. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241030091603.6073-1-pkshih@realtek.com
2024-11-06wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg()Pei Xiao1-0/+4
kmalloc may fail, return value might be NULL and will cause NULL pointer dereference. Add check NULL return of kmalloc in btc_fw_set_monreg(). Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Fixes: b952cb0a6e2d ("wifi: rtw89: coex: Add register monitor report v7 format") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/516a91f3997534f708af43c7592cbafdd53dd599.1730253508.git.xiaopei01@kylinos.cn
2024-11-06wifi: rtw89: 8922a: fill the missing OP1dB configurationKuan-Chung Chen2-0/+61
OP1dB stands for Output 1dB Compression Point. At this point, the power amplifier starts to enter the saturation region, resulting in distortion. The configuration of OP1dB can optimize the RX gain saturation region, improving RX throughput from 573 to 675 Mbps. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241030022903.13243-1-pkshih@realtek.com
2024-11-06wifi: rtw89: mac: no configure CMAC/DMAC tables for firmware secure bootPing-Ke Shih1-2/+5
The initial CMAC/DMAC tables used by WiFi 6 chips are not needed to be called for firmware secure boot. Otherwise, it causes firmware abnormal and throw warnings. rtw89_8852be 0000:03:00.0: FW status = 0x1400 rtw89_8852be 0000:03:00.0: FW BADADDR = 0xb872f800 rtw89_8852be 0000:03:00.0: FW EPC/RA = 0xb89333b7 rtw89_8852be 0000:03:00.0: FW MISC = 0x0 rtw89_8852be 0000:03:00.0: R_AX_HALT_C2H = 0x10002010 rtw89_8852be 0000:03:00.0: R_AX_SER_DBG_INFO = 0x0 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c95 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9b rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9f rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9b rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9d rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9f rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241030022135.11688-9-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 11:00:46 +0300