| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Track the powersave bit on frames where we can look up
the STA by link addresses and set the links active or
inactive accordingly, and use this information to TX
only on links that are actually active in the peer.
Note that this doesn't implement powersave fully so
if no link is active things will not work right.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the link activation handling in mac80211, skip
any inactive links on TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Merge wireless/main to get the rx.link fix, which is needed
for further work in this area.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
drivers
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In netlink RX, now that we can actually have multiple
channel contexts for MLO, things don't work well as we
only keep a single pointer, and then on link switching
we might NULL it, and hit the return if the channel is
NULL.
However, we already use mac80211_hwsim_tx_iter() which
deals with all this, so remove the test and adjust the
remaining code a bit.
This then means we no longer use the chanctx pointer,
so remove it as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Catch the bugs fixed in mac80211 by the previous commits
and warn if an invalid address is added (or removed).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Refactor some common RX functionality between the netlink
and non-netlink paths, adding the special hwsim TLV (if
compiled) also in the netlink path.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just as an additional check that mac80211 isn't doing
anything strange, add a check of the STA magic (which
gets assigned when the station is added, and cleared
when the station is removed).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that we have proper multicast TX in mac80211, there's
no longer a need to fake something here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An invalid packet with a length shorter than the specified length in the
netlink header can lead to use-after-frees and slab-out-of-bounds in the
processing of the netlink attributes, such as the following:
BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010
Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12
Workqueue: events hwsim_virtio_rx_work
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
print_report.cold+0x5e/0x5e5
kasan_report+0xb1/0x1c0
__nla_validate_parse+0x1258/0x2010
__nla_parse+0x22/0x30
hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0
hwsim_virtio_rx_work+0x1b2/0x370
process_one_work+0x8df/0x1530
worker_thread+0x575/0x11a0
kthread+0x29d/0x340
ret_from_fork+0x22/0x30
</TASK>
Discarding packets with an invalid length solves this.
Therefore, skb->len must be set at reception.
Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support to connect to a non-transmit MBSSID AP profile.
Non-transmit MBSSID profile parameters are passed to the firmware
via WMI VDEV UP command and this helps firmware to track MBSSID
profile within the multi-BSS beacon and report beacon loss if
any.
WCN6750, QCA6390 & WCN6855 firmwares have the support and hence
enable the support on these hardwares.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220901080616.29414-1-quic_mpubbise@quicinc.com
|
|
Currently, creation of debugfs entries for TWT is failing during
hardware restart because of the residual TWT files which were
created during add_interface(). Since, struct arvif{} is memset
to zero upon add_interface() invocation, when the hardware restart
is triggered, arvif is memset to 0 and TWT files are attempted to
create again which will fail because of the residual TWT files
already in place, this leads to hardware restart failure.
Also, it is not a good idea to return error from add_interface()
because of debugfs file creation failures. Moreover, debugfs
framework can very well handle the errors in it's create file &
remove file APIs and the errors returned by these APIs are not
checked in most usecases.
Fix the HW restart failure by ignoring the errors returned from
the debugfs APIs.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Fixes: fe98a6137d03 ("ath11k: add debugfs for TWT debug calls")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220720135150.22193-3-quic_mpubbise@quicinc.com
|
|
Currently TWT debugfs files required for manually testing the
TWT feature are created only for the AP interfaces; these debugfs
hooks are also required for the station interfaces in order to
test the TWT feature manually, therefore create these debugfs
hooks for station iftype as well.
In the case of station interfaces, TWT is entirely handled in the
firmware based on input parameters passed to it during association
via TWT enable WMI command. In order to manually test this feature,
firmware expects to first disable the TWT feature and then send the
enable command with sta_cong_timer_ms parameter set to 0.
This is true for WCN6750, QCA6390 & WCN6855 hardwares.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220720135150.22193-2-quic_mpubbise@quicinc.com
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220830201457.7984-2-wsa+renesas@sang-engineering.com
|
|
Return value from cfg80211_rx_mgmt() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220830105505.287564-1-cui.jinpeng2@zte.com.cn
|
|
Add the missing destroy_workqueue() before return from rtw_core_init()
in error path.
Fixes: fe101716c7c9 ("rtw88: replace tx tasklet with work queue")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com
|
|
This does a "chunk_len - 4" subtraction later when it calls:
ret = wfx_hif_configuration(wdev, buf + 4, chunk_len - 4);
so check for "chunk_len" is less than 4.
Fixes: dcbecb497908 ("staging: wfx: allow new PDS format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eX7Xv2ubUOvW7@kili
|
|
There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop. But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili
|
|
Declare this to tell AP we can support beamformee over bandwidth 160M,
and then yield better performance in field.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-3-pkshih@realtek.com
|
|
Writing address to kick hardware to initialize address CAM, and then poll
ready bit to determine completed. Old wrong code poll wrong register
address, so it can lead error and fail to bring up interface.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-2-pkshih@realtek.com
|
|
Packets containing HTC field with legacy rate could be dropped by AP. If
TX rate of report is lower than MCS2, hardware might fall back rate to
legacy. Therefore, add a checking rule to avoid HTC field in this
situation.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-1-pkshih@realtek.com
|
|
Number of TX resource must be minimum of TX_BD and TX_WD. Only considering
TX_BD could drop TX packets pulled from mac80211 if TX_WD is unavailable.
Fixes: 52edbb9fb78a ("rtw89: ps: access TX/RX rings via another registers in low power mode")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824063312.15784-2-pkshih@realtek.com
|
|
We turn off interrupt in ISR, and re-enable interrupt in threadfn or
napi_poll according to the mode it stays. If we are turning off interrupt,
rtwpci->running flag is unset and interrupt handler stop processing even
if it was called, so disallow to re-enable interrupt in this situation.
Or, wifi chip doesn't trigger interrupt events anymore because interrupt
status (ISR) isn't clear by interrupt handler anymore.
Fixes: c83dcd0508e2 ("rtw89: pci: add a separate interrupt handler for low power mode")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824063312.15784-1-pkshih@realtek.com
|
|
The calibration value of XTAL offset may be too large in some wifi
modules, that the CFO tracking mechanism under the existing tracking
boundary can not adjust the CFO to the tolerable range. So we enlarge it.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824061425.13764-1-pkshih@realtek.com
|
|
We find that suspend/resume tests cause 8852CE lost, because some pci
registers are changed for 8852CE. So, correct them accordingly.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-6-pkshih@realtek.com
|
|
8852CE controls CLKREQ, ASPM L1, L1ss via wifi registers
instead, so change them accordingly.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-5-pkshih@realtek.com
|
|
There is chance that PCI PHY auto adaption fail. When first time boot up,
software restore the right adaption value and close PHY auto adaption
mechanism.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-4-pkshih@realtek.com
|
|
It is found that 8852ce loses some beacon after
enabling deep ps mode. We set TBTT shift to wake up
firmware early to open RF/BB for receiving beacon in time.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-3-pkshih@realtek.com
|
|
When starting to send heavy traffic in low power mode,
driver will call multiple tx wake notify to wake firmware
within a short time. In this situation, firmware may miss
power mode change request from driver and leads to status
error. So we change driver to call power_mode_change at most
three times to make sure firmware could get the request.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-2-pkshih@realtek.com
|
|
BA CAM entries are global resource of hardware, so move the bitmap and
instances to rtw89_cam_info, and then use link list from rtw89_sta to
these instances.
To check the allocation, add ba_cam to debugfs:
map:
mac_id: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
addr_cam: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bssid_cam: 01 00 00 00 00 00 00 00
sec_cam: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba_cam: 03 00 00 00 00 00 00 00
VIF [0] 94:08:53:8e:ef:21
bssid_cam_idx=0
addr_cam_idx=0
-> bssid_cam_idx=0
sec_cam_bitmap=00 00 00 00 00 00 00 00
STA [0] 38:78:62:8b:cb:c6
addr_cam_idx=0
-> bssid_cam_idx=0
sec_cam_bitmap=00 00 00 00 00 00 00 00
ba_cam tid[6]=0, tid[1]=1
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220816013247.6243-4-pkshih@realtek.com
|
|
The bacam_v1 must do additional initialization, and H2C content of BA CAM
is also different. So, correct them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220816013247.6243-3-pkshih@realtek.com
|
|
8852A has 2 BA CAM entries, but 8852C has 8 entries. Add a field to
discriminate their differences.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220816013247.6243-2-pkshih@realtek.com
|
|
TX power byrate:
doesn't change
TX power limit:
configure values for KCC and UK
refine a bit configuration vales
TX power limit_ru:
configure values for KCC and UK
refine a bit configuration values
change 6GHz to follow indoor setting
configure 6GHz values for ETSI
TX power shape:
change with TX power limit/limit_ru
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220812093116.56791-4-pkshih@realtek.com
|
|
Update 8852c radio A/B parameters from internal HALRF_027_00_071 R49.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220812093116.56791-3-pkshih@realtek.com
|
|
Some chips' RF TX power limit/limit_ru tables start to configure some
negative values. Fix the setting logic to prevent negative values from
polluting fields of others.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220812093116.56791-2-pkshih@realtek.com
|
|
Because RTL8852c firmware handshake use different structure definition
with RTL8852a, so it's necessary to update a version for RTL8852c.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-10-pkshih@realtek.com
|
|
Because the later firmware had patched some new feature, it can control
the Wi-Fi/BT slots more efficiently. This patch enhance it for better
Wi-Fi SCC mode performance.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-9-pkshih@realtek.com
|
|
Due to the difference of Wi-Fi firmware supported feature, RTL8852C
need to defined more policy to enable the features.
(Ex: DBCC, Wi-Fi multi-role, TDMA instant and so on)
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-8-pkshih@realtek.com
|
|
The H2C format and support feature are different. The newer Wi-Fi firmware
and driver branch need to handshake more information like DBCC or P2P
connection info.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-7-pkshih@realtek.com
|
|
RTL8852C use a later version Wi-Fi firmware, there are some parameters
need to be defined. These new parameter can avoid some unexpected
TDMA mode while Wi-Fi enter/leave lps.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-6-pkshih@realtek.com
|
|
It is for setting up BT slot max length at BT auto slot mechanism.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-5-pkshih@realtek.com
|
|
Add a part of logic to parse type of ctrl report from firmware, and
remove Bluetooth packet counter count from driver, the feature was
moved to firmware at rtl8852c.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-4-pkshih@realtek.com
|
|
To configure the different chips with different coexistence version,
separated the firmware feature version matching number is necessary.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-3-pkshih@realtek.com
|
|
Update scoreboard setting to let Bluetooth know Wi-Fi power save state.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-2-pkshih@realtek.com
|
|
mac_txen time is to inform TMAC tx after rx air end.
Modify 8852c value to meet TB SIFS time.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220704023453.19935-7-pkshih@realtek.com
|
|
Prebkf time is to inform generating tx command if remaining backoff
time less than this setting value.
It might cause SER if generating tx command early in security mode.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220704023453.19935-6-pkshih@realtek.com
|
|
Calling rtw89_leave_lps() should hold rtwdev::mutex.
So, fix it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220704023453.19935-5-pkshih@realtek.com
|
|
Correct ability of HE HTC that both STA and AP mode can support.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220704023453.19935-4-pkshih@realtek.com
|
|
Sometimes, BB might encounter RX problem on OFDM 6M. It's not quite
easy to happen, but if it happens, we will keep getting stuck on RX.
And, since we cannot properly receive layer 2 ACK, it also casues TX
problem, e.g. constantly retrying TX. Eventually, after some time, we
would get disconnected due to abnormal behavior.
Update break setting and phy status parsing time to make BB get out
of stuck state faster.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220704023453.19935-3-pkshih@realtek.com
|
