summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2021-02-24ath11k: qmi: add more debug messagesKalle Valo1-0/+25
To make it easier to follow the qmi event flow. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613569421-14177-1-git-send-email-kvalo@codeaurora.org
2021-02-24ath11k: fix AP mode for QCA6390Kalle Valo1-2/+2
Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely broke AP mode on QCA6390: kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant[2307]: Failed to set beacon parameters wpa_supplicant[2307]: Interface initialization failed wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED wpa_supplicant[2307]: wlan0: AP-DISABLED wpa_supplicant[2307]: wlan0: Unable to setup interface. wpa_supplicant[2307]: Failed to initialize AP interface This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") added error handling for ath11k_peer_create(), which had been failing all along but was unnoticed due to the missing error handling. The actual bug was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is already created"). ath11k_peer_create() was failing because for AP mode the peer is created already earlier op_add_interface() and we should skip creation here, but the check for modes was wrong. Fixing that makes AP mode work again. This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614006849-25764-1-git-send-email-kvalo@codeaurora.org
2021-02-24ath11k: qmi: use %pad to format dma_addr_tGeert Uytterhoeven1-2/+2
If CONFIG_ARCH_DMA_ADDR_T_64BIT=n: drivers/net/wireless/ath/ath11k/qmi.c: In function ‘ath11k_qmi_respond_fw_mem_request’: drivers/net/wireless/ath/ath11k/qmi.c:1690:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=] 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1691 | ab->qmi.target_mem[i].paddr, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | dma_addr_t {aka unsigned int} drivers/net/wireless/ath/ath11k/debug.h:64:30: note: in definition of macro ‘ath11k_dbg’ 64 | __ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \ | ^~~ drivers/net/wireless/ath/ath11k/qmi.c:1690:34: note: format string is defined here 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ~~~^ | | | long long unsigned int | %x Fixes: d5395a5486596308 ("ath11k: qmi: add debug message for allocated memory segment addresses and sizes") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210221182754.2071863-1-geert@linux-m68k.org
2021-02-22Revert "ath9k: fix ath_tx_process_buffer() potential null ptr dereference"Shuah Khan1-16/+12
This reverts commit a56c14bb21b296fb6d395164ab62ef2e419e5069. ath_tx_process_buffer() doesn't dereference or check sta and passes it to ath_tx_complete_aggr() and ath_tx_complete_buf(). ath_tx_complete_aggr() checks the pointer before use. No problem here. ath_tx_complete_buf() doesn't check or dereference sta and passes it on to ath_tx_complete(). ath_tx_complete() doesn't check or dereference sta, but assigns it to tx_info->status.status_driver_data[0] ath_tx_complete_buf() is called from ath_tx_complete_aggr() passing null ieee80211_sta pointer. There is a potential for dereference later on, if and when the tx_info->status.status_driver_data[0]is referenced. In addition, the rcu read lock might be released before referencing the contents. ath_tx_complete_buf() should be fixed to check sta perhaps? Worth looking into. Reverting this patch because it doesn't solve the problem and introduces memory leak by skipping buffer completion if the pointer (sta) is NULL. Fixes: a56c14bb21b2 ("ath9k: fix ath_tx_process_buffer() potential null ptr dereference") Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210217211801.22540-1-skhan@linuxfoundation.org
2021-02-22ath11k: print hardware name and version during initialisationKalle Valo1-1/+1
This way it's easy for the user to find what device is actually installed. This also helps reporting bugs. Screenshot: [ 459.988812] ath11k_pci 0000:06:00.0: BAR 0: assigned [mem 0xdb000000-0xdbffffff 64bit] [ 459.988867] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 459.997048] ath11k_pci 0000:06:00.0: qca6390 hw2.0 [ 460.058093] mhi mhi0: Requested to power ON [ 460.059741] mhi mhi0: Power on setup success [ 460.476924] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 460.477032] ath11k_pci 0000:06:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613589400-18891-1-git-send-email-kvalo@codeaurora.org
2021-02-22iwlwifi: avoid crash on unsupported debug collectionJohannes Berg1-0/+2
If the opmode doesn't support debug collection (DVM) then don't crash, but just skip the callback. Fixes: d01293154c0a ("iwlwifi: dbg: add op_mode callback for collecting debug data.") Reported-by: Andy Lavr <andy.lavr@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210219133506.ecabe285bc7d.I73d230d555c595fa2d9bf284f80078729fe18aa4@changeid
2021-02-18mt76: mt7915: only modify tx buffer list after allocating tx token idFelix Fietkau1-5/+5
Modifying the tx buffer list too early can leak DMA mappings Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210216135119.23809-2-nbd@nbd.name
2021-02-18mt76: fix tx skb error handling in mt76_dma_tx_queue_skbFelix Fietkau1-9/+6
When running out of room in the tx queue after calling drv->tx_prepare_skb, the buffer list will already have been modified on MT7615 and newer drivers. This can leak a DMA mapping and will show up as swiotlb allocation failures on x86. Fix this by moving the queue length check further up. This is less accurate, since it can overestimate the needed room in the queue on MT7615 and newer, but the difference is small enough to not matter in practice. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210216135119.23809-1-nbd@nbd.name
2021-02-18ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2-1/+8
When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name
2021-02-18ath11k: Enable radar detection for 160MHz secondary segmentLavanya Suresh1-1/+3
WMI_CHAN_INFO_DFS_FREQ2 needs to be set in wmi vdev start command chan info parameter, to enable radar detection for secondary segment in 160MHz. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613480547-28810-1-git-send-email-lavaks@codeaurora.org
2021-02-18ath11k: Fix sounding dimension config in HE capLavanya Suresh1-2/+0
Number of Sounding dimensions config received from firmware for bandwidth above 80MHz is cleared, and proper value is not set again. So not resetting it to accept the config from firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613460136-7170-1-git-send-email-lavaks@codeaurora.org
2021-02-17ath11k: add qcn9074 pci device supportAnilkumar Kolli1-1/+17
QCN9074 is PCI based 11ax radio. - has 2G/5G/6G variants. - has NSS 2x2 and 4x4 variants. QCN9074 uses 45MB of HOST DDR memory, target requests host memory in segments, each segment is of 2MB size and is physcial contiguous and use static window configuration. Currently there are still two issues with QCN9074, see below. So we don't add QCN9074 PCI id yet to make sure the driver is loaded. The id will be added only after the issues are fixed. Issue 1: ath11k_pci 0000:06:00.0: qmi failed memory request, err = -110 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-110 Issue 2: ath11k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath11k_pci 0000:06:00.0: qmi failed set mode request, mode: 0, err = -110 ath11k_pci 0000:06:00.0: qmi failed to send wlan fw mode:-110 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-12-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add extended interrupt support for QCN9074Karthikeyan Periyasamy5-4/+56
Update the specific hw ring mask for QCN9074. Update the timestamp information while processing DP and CE interrupts. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-11-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add CE interrupt support for QCN9074Karthikeyan Periyasamy7-8/+294
Define host CE configuration for QCN9074 since the max CE count is six. Available MSI interrupt is five so cannot able to map the ce_id directly for the msi_data_idx. Added get_ce_msi_idx ops in ath11k_hif_ops to get the CE MSI idx which is used to initialize the CE ring. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-10-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add data path support for QCN9074Karthikeyan Periyasamy8-237/+913
hal rx descriptor is different for QCN9074 target type. since rx_msdu_end, rx_msdu_start, rx_mpdu_start elements are in different placement/alignment. In order to have generic data path, introduce platform specific hal rx descriptor access ops in ath11k_hw_ops. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-9-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add hal support for QCN9074Karthikeyan Periyasamy11-89/+269
Define the hal ring address and ring meta descriptor mask for QCN9074. Move the platform specific address to the ath11k_hw_regs. Define tx_mesh_enable ops in ath11k_hw_ops since its accessing platform specific TCL descriptor. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-8-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add static window support for register accessKarthikeyan Periyasamy3-9/+68
Three window slots can be configure. First window slot dedicate for dynamic selection and remaining two slots dedicate for static selection. To optimise the window selection, frequent registers (UMAC, CE) are configure in static window slot. so that we minimise the window selection. Other registers are configure in dynamic window slot. Get the window start address from the respective offset and access the read/write register. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-7-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Add qcn9074 mhi controller configAnilkumar Kolli4-8/+122
Add MHI config for QCN9074 also populate ath11k_hw_params for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-6-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Update memory segment count for qcn9074Anilkumar Kolli2-1/+3
QCN9074 FW requests three types memory segments during the boot, qmi mem seg type 1 of size 15728640 qmi mem seg type 4 of size 3735552 qmi mem seg type 3 of size 1048576 Segment type 3 is for M3 coredump memory. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-5-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: qmi: increase the number of fw segmentsAnilkumar Kolli1-3/+3
QCN9074 firmware uses 20MB of HOST DDR memory, fw requests the memory in segmnets of size 1MB/512KB/256KB. Increase the number of fw memory segments to 52. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-4-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Move qmi service_ins_id to hw_paramsAnilkumar Kolli4-2/+6
qmi service_ins_id is unique for QCA6390 and QCN9074, this is needed for adding QCN9074 support. No functional changes. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-3-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Refactor ath11k_msi_configAnilkumar Kolli2-17/+23
Move ath11k_msi_config to array of structures to add multiple pci devices support. No functional changes. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-2-git-send-email-akolli@codeaurora.org
2021-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
2021-02-16ath11k: debugfs: Fix spelling mistake "Opportunies" -> "Opportunities"Colin Ian King1-1/+1
There is a spelling mistake in some debug text, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210212113627.212787-1-colin.king@canonical.com
2021-02-16ath9k: fix ath_tx_process_buffer() potential null ptr dereferenceShuah Khan1-12/+16
ath_tx_process_buffer() references ieee80211_find_sta_by_ifaddr() return pointer (sta) outside null check. Fix it by moving the code block under the null check. This problem was found while reviewing code to debug RCU warn from ath10k_wmi_tlv_parse_peer_stats_info() and a subsequent manual audit of other callers of ieee80211_find_sta_by_ifaddr() that don't hold RCU read lock. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/43ed9abb9e8d7112f3cc168c2f8c489e253635ba.1613090339.git.skhan@linuxfoundation.org
2021-02-15b43: N-PHY: Fix the update of coef for the PHY revision >= 3caseColin Ian King1-1/+1
The documentation for the PHY update [1] states: Loop 4 times with index i If PHY Revision >= 3 Copy table[i] to coef[i] Otherwise Set coef[i] to 0 the copy of the table to coef is currently implemented the wrong way around, table is being updated from uninitialized values in coeff. Fix this by swapping the assignment around. [1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/ Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration") Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13Merge tag 'wireless-drivers-next-2021-02-12' of ↵David S. Miller223-5973/+33644
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 Second set of patches for v5.12. Last time there was a smaller pull request so unsurprisingly this time we have a big one. mt76 has new hardware support and lots of new features, iwlwifi getting new features and rtw88 got NAPI support. And the usual cleanups and fixes all over. Major changes: ath10k * support setting SAR limits via nl80211 rtw88 * support 8821 RFE type2 devices * NAPI support iwlwifi * add new FW API support * support for new So devices * support for RF interference mitigation (RFI) * support for PNVM (Platform Non-Volatile Memory, a firmware data file) from BIOS mt76 * add new mt7921e driver * 802.11 encap offload support * support for multiple pcie gen1 host interfaces on 7915 * 7915 testmode support * 7915 txbf support brcmfmac * support for CQM RSSI notifications wil6210 * support for extended DMG MCS 12.1 rate ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12rtw88: 8822c: update RF_B (2/2) parameter tables to v60Po-Hao Huang1-852/+4780
Update RTL8822C devices' RF_A tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-9-pkshih@realtek.com
2021-02-12rtw88: 8822c: update RF_B (1/2) parameter tables to v60Po-Hao Huang1-11/+3775
Update RTL8822C devices' RF_B tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-8-pkshih@realtek.com
2021-02-12rtw88: 8822c: update RF_A parameter tables to v60Po-Hao Huang1-68/+7904
Update RTL8822C devices' RF_A tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-7-pkshih@realtek.com
2021-02-12rtw88: 8822c: update MAC/BB parameter tables to v60Po-Hao Huang1-371/+886
Update RTL8822C devices' MAC/BB tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-6-pkshih@realtek.com
2021-02-12rtw88: replace tx tasklet with work queuePo-Hao Huang5-7/+10
Replace tasklet so we can do tx scheduling in parallel. Since throughput is delay-sensitive in most cases, we allocate a dedicated, high priority wq for our needs. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-5-pkshih@realtek.com
2021-02-12rtw88: add napi supportPo-Hao Huang3-24/+145
Use napi to reduce overhead on rx interrupts. Driver used to interrupt kernel for every Rx packet, this could affect both system and network performance. NAPI is a mechanism that uses polling when processing huge amount of traffic, by doing this the number of interrupts can be decreased. Network performance can also benefit from this patch. Since TCP connection is bidirectional and acks are required for every several packets. These ack packets occupie the PCI bus bandwidth and could lead to performance degradation. When napi is used, GRO receive is enabled by default in the mac80211 stack. So mac80211 won't pass every RX TCP packets to the kernel TCP network stack immediately. Instead an aggregated large length TCP packet will be delivered. This reduces the tx acks sent and gains rx performance. After the patch, the Rx throughput increases about 25Mbps in 11ac. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-4-pkshih@realtek.com
2021-02-12rtw88: add rts conditionPo-Hao Huang2-1/+10
Since we set the IEEE80211_HW_HAS_RATE_CONTROL flag, so use_rts in ieee80211_tx_info will never be set in the ieee80211_xmit_fast path. Add length check for skb to decide whether rts is needed. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-3-pkshih@realtek.com
2021-02-12rtw88: add dynamic rrsr configurationPo-Hao Huang6-3/+74
Register rrsr determines the response rate we send. In field tests, using rate higher than current tx rate could lead to difficulty for the receiving end to receive management/control frames. Calculate current modulation level by tx rate then cross out rate higher than those. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-2-pkshih@realtek.com
2021-02-12iwlwifi: remove incorrect comment in pnvmLuca Coelho1-5/+0
We use this driver as a backport that also runs on older kernels (as part of the backports project). So we use some checks to backport or prevent code from compiling in incompatible kernel version. When I took one of the PNVM patches from the backport, I accidentally left the comment that a certain part of the code doesn't work in older kernels. This obviously should never be valid for the mainline. Remove this comment. Reported-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210211223049.40d545a0fa89.I04793aaa5312b926335c8db32131f000432df511@changeid
2021-02-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo31-69/+577
ath.git patches for v5.12. Major changes: wil6210 * add support for extended DMG MCS 12.1 rate
2021-02-11Merge tag 'iwlwifi-next-for-kalle-2021-02-10' of ↵Kalle Valo55-444/+1116
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second set of iwlwifi patches intended for v5.12 * Add some device IDs that got lost in a rebase; * A bunch of fixes in the PPAG code; * A few fixes in the debugging framework; * Fix a couple of potential crashes in error paths; * More HW IDs for new HW; * Add one more value to the device configuration code; * Support new scan config FW API; * Some more CSA fixes; * Support for RF interference mitigation (RFI); * Improvements in the NVM flows; * Bump the FW API support version; * Implement support for PNVM from BIOS; * Fix PM status when a FW crash happens; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Thu 11 Feb 2021 02:02:34 AM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2021-02-11ath11k: qmi: add debug message for allocated memory segment addresses and sizesKalle Valo1-0/+5
This helps debugging firmware memory allocation problems. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613041549-7265-1-git-send-email-kvalo@codeaurora.org
2021-02-11ath11k: pci: remove experimental warningKalle Valo1-2/+0
I have received feedback that QCA6390 PCI support is working for many, and I'm also using QCA6390 on my daily driver^Hlaptop. While there are issues still to be resolved it's not really experimental anymore, so remove the experimental warning from driver initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613040697-20289-1-git-send-email-kvalo@codeaurora.org
2021-02-11ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()Shuah Khan1-2/+5
ieee80211_find_sta_by_ifaddr() must be called under the RCU lock and the resulting pointer is only valid under RCU lock as well. Fix ath10k_wmi_tlv_op_pull_peer_stats_info() to hold RCU lock before it calls ieee80211_find_sta_by_ifaddr() and release it when the resulting pointer is no longer needed. This problem was found while reviewing code to debug RCU warn from ath10k_wmi_tlv_parse_peer_stats_info(). Link: https://lore.kernel.org/linux-wireless/7230c9e5-2632-b77e-c4f9-10eca557a5bb@linuxfoundation.org/ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210210212107.40373-1-skhan@linuxfoundation.org
2021-02-11ath10k: change ath10k_offchan_tx_work() peer present msg to a warnShuah Khan1-3/+2
Based on the comment block in this function and the FIXME for this, peer being present for the offchannel tx is unlikely. Peer is deleted once tx is complete. Change peer present msg to a warn to detect this condition. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b1f71272d56ee1d7f567fbce13bdb56cc06d342.1612915444.git.skhan@linuxfoundation.org
2021-02-11ath9k: fix data bus crash when setting nf_override via debugfsLinus Lüssing1-1/+4
When trying to set the noise floor via debugfs, a "data bus error" crash like the following can happen: [ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60 [ 88.438895] Oops[#1]: [ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0 [ 88.447174] task: 838a1c20 task.stack: 82d5e000 [ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4 [ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000 [ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000 [ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0 [ 88.473457] $16 : 83230080 00000002 0000001b 83230080 [ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92 [ 88.484263] $24 : 00000fa4 77edd860 [ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60 [ 88.495070] Hi : 00000000 [ 88.498044] Lo : 00000000 [ 88.501040] epc : 80221c28 ioread32+0x8/0x10 [ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw] [ 88.512049] Status: 1000fc03 KERNEL EXL IE [ 88.516369] Cause : 5080801c (ExcCode 07) [ 88.520508] PrId : 00019374 (MIPS 24Kc) [ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack [ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic [ 88.671671] crypto_hash [ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc) [ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002 [ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858 [ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38 [ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000 [ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292 [ 88.725465] ... [ 88.727994] Call Trace: [ 88.730532] [<80221c28>] ioread32+0x8/0x10 [ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008 [ 88.744846] [ 88.746464] ---[ end trace db226b2de1b69b9e ]--- [ 88.753477] Kernel panic - not syncing: Fatal exception [ 88.759981] Rebooting in 3 seconds.. The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not like being called when the hardware is asleep, leading to this crash. The easiest way to reproduce this is trying to set nf_override while the hardware is down: $ ip link set down dev wlan0 $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override Fixing this crash by waking the hardware up before trying to set the noise floor. Similar to what other ath9k debugfs files do. Tested on a Lima board from 8devices, which has a QCA 4531 chipset. Fixes: b90189759a7f ("ath9k: add noise floor override option") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
2021-02-11ath11k: add support to configure spatial reuse parameter setRajkumar Manoharan6-5/+447
The SPR parameter set comprises OBSS PD threshold for SRG and non SRG and Bitmap of BSS color and partial BSSID. This adds support to configure fields of SPR element to firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01164-QCAHKSWPL_SILICONZ-1 Tested-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612843714-29174-1-git-send-email-rmanohar@codeaurora.org
2021-02-11ath10k: restore tx sk_buff of htt header for SDIOWen Gong1-0/+2
ieee80211_report_used_skb of mac80211 use the frame_control of ieee80211_hdr in sk_buff and indicate it to another function ieee80211_mgd_conn_tx_status, then it queue work ieee80211_sta_work, but ieee80211_is_auth(fc) in ieee80211_sta_work check fail when the authentication has transmitted by ath10k. When the ath10k report it with HTT_TX_COMPL_STATE_DISCARD, it will be set without flag IEEE80211_TX_STAT_ACK, then mac80211 should try the next authentication immeditely, but in fact mac80211 wait 1 second for it, the reason is ieee80211_is_auth(fc) in ieee80211_sta_work check fail for the sk_buff which is not restored, the data of sk_buff is not the begin of ieee80211_hdr, in fact it is the begin of htt_cmd_hdr. dmesg without this patch, it wait 1 second for the next retry when ath10k report without IEEE80211_TX_STAT_ACK for authentication: [ 6973.883116] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 1/3) [ 6974.705471] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 2/3) [ 6975.712962] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 3/3) Restore the sk_buff make mac8011 retry the next authentication immeditely which meet logic of mac80211. dmesg with this patch, it retry the next immeditely when ath10k report without IEEE80211_TX_STAT_ACK for authentication: [ 216.734813] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 1/3) [ 216.739914] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 2/3) [ 216.745874] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 3/3) Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612839530-2263-1-git-send-email-wgong@codeaurora.org
2021-02-11wilc1000: Fix use of void pointer as a wrong struct typeVsevolod Kozlov3-9/+11
ac_classify() expects a struct sk_buff* as its second argument, which is a member of struct tx_complete_data. priv happens to be a pointer to struct tx_complete_data, so passing it directly to ac_classify() leads to wrong behaviour and occasional panics. Since there is only one caller of wilc_wlan_txq_add_net_pkt and it already knows the type behind this pointer, and the structure is already in the header file, change the function signature to use the real type instead of void* in order to prevent confusion. Signed-off-by: Vsevolod Kozlov <zaba@mm.st> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YCQomJ1mO5BLxYOT@Vsevolods-Mini.lan
2021-02-11brcmsmac: Fix the spelling configation to configuration in the file d11.hBhaskar Chowdhury1-1/+1
s/configation/configuration/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209232921.1255425-1-unixbhaskar@gmail.com
2021-02-11iwlwifi: bump FW API to 62 for AX devicesLuca Coelho1-1/+1
Start supporting API version 62 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210172142.8c2e4ebd947e.Id1be235baad632e9ba1c07590e62184fc2f07c04@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: pnvm: implement reading PNVM from UEFILuca Coelho1-1/+90
We now support fetching the PNVM data from a UEFI variable. Add the code to read this variable first and use it. If it's not available, we fall back to reading the data from the filesystem, as before. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210211015026.289084803334.Ie234805047df3be84f4235f9dafaf4cdecf0db9a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: pnvm: move file loading code to a separate functionLuca Coelho1-37/+61
In preparation to support loading the PNVM from UEFI, move the function that loads the PNVM from the filesystem to a separate function. This will make it easier to try to load from both places later on. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210172142.072aa2e8bbc5.Ib351ee5da47a4cee60d44e66d32d2f6bba6f3150@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 15:24:00 +0300