summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26iwlwifi: mvm: Do not use full SSIDs in 6GHz scanIlan Peer1-3/+6
The scan request processing populated the direct SSIDs in the FW scan request command also for 6GHz scan, which is not needed and might result in unexpected behavior. Fix the code to add the direct SSIDs only in case the scan is not a 6GHz scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: print PNVM complete notification status in hexadecimalLuca Coelho1-1/+1
This value is not a simple incrementing integer, it contains some flags as well, so reading it in hexadecimal is easier. Change the print to do it in hex instead of decimal. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.5e35f930d0ed.I5f94575a835f060bdc8ed3477871256f8a2cbaaa@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: pcie: dump error on FW reset handshake failuresJohannes Berg3-6/+24
If the firmware crashes while we're waiting for the reset handshake then it cannot possibly make progress anymore, and we will just time out the wait. That's pointless, so just stop waiting at that point. Additionally, if it never acknowledges the reset handshake, something went wrong. Dump an error in both of these cases, but we need to do it synchronously here since the device will be turned off. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.8b6a33544b4b.I55f97f70f8efa64db064a9207177a094c60ac8f1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: prepare for synchronous error dumpsJohannes Berg10-78/+113
In some cases it may be necessary to synchronously create a firmware error report, add the necessary infrastructure for this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.481b6642f0fc.I7c9c958408a285e3d19aceed2a5a3341cfc08382@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: pcie: free RBs during configureJohannes Berg2-1/+7
When switching op-modes, or more generally when reconfiguring, we might switch the RB size. In _iwl_pcie_rx_init() we have a comment saying we must free all RBs since we might switch the size, but this is actually too late: the switch has been done and we'll free the buffers with the wrong size. Fix this by always freeing the buffers, if any, at the start of configure, instead of only after the size may have changed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: pcie: optimise struct iwl_rx_mem_buffer layoutJohannes Berg1-2/+3
On 64-bit machines, struct iwl_rx_mem_buffer has a lot of padding due to the use of pointers after the small items. Move the list entry before them, and while at it also add documentation for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.6a62255b3df0.I47bb36530a3c2cdbd73454c796ce608ee2a32a6c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: avoid FW restart while shutting downJohannes Berg1-0/+8
If the firmware crashes while we're already shutting down the system, there isn't much we can do since the shutdown process is continuing and we wanted to do that. Don't do a FW restart, with the implied debug collection, in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.43a7351ae6bd.I164d48ce4379accf76ea0637983fd946d52dc6f5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: nvm: enable IEEE80211_HE_PHY_CAP10_HE_MU_M1RU_MAX_LTFJohannes Berg1-0/+2
The device is capable of receiving MU-MIMO frames with 8 symbols, enable the bit here that says so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.90cf2eb42794.I692e6d0fde6e99a1db97d2e678952f043f48f603@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: set BROADCAST_TWT_SUPPORTED in MAC policyShaul Triebitz2-2/+7
If broadcast TWT is supported in the BSS, tell the firmware about it by setting the BROADCAST_TWT_SUPPORTED in the MAC context command. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.736c3b1bc915.I10583bb6f808aa60954da26106bbc8c26620cbe8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: iwl-nvm-parse: set STBC flags for HE phy capabilitiesMordechay Goodstein1-1/+5
Our HW supersets STBC for HE but never set it in assoc IE, fix it by setting it and enable using it. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802170640.0108f3e322b6.Ib25a91b5c48ff1fb2185b86a9e4bf5eec637df90@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-4/+10
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24Merge 5.14-rc7 into char-misc-nextGreg Kroah-Hartman6-14/+91
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-23Merge tag 'wireless-drivers-next-2021-08-22' of ↵David S. Miller62-7732/+614
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.15 First set of patches for v5.15. This got delayed as I have been mostly offline for the last few weeks. The biggest change is removal of prism54 driver, otherwise just smaller changes. Major changes: ath5k, ath9k, ath10k, ath11k: * switch from 'pci_' to 'dma_' API brcmfmac * allow per-board firmware binaries * add support 43752 SDIO device prism54 * remove the obsoleted driver, everyone should be using p54 driver instead ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23qtnfmac: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-28/+28
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-21brcmsmac: make array addr static const, makes object smallerColin Ian King1-1/+1
Don't populate the array addr on the stack but instead it static const. Makes the object code smaller by 79 bytes: Before: text data bss dec hex filename 176015 54652 128 230795 3858b .../broadcom/brcm80211/brcmsmac/main.o After: text data bss dec hex filename 175872 54716 128 230716 3853c .../broadcom/brcm80211/brcmsmac/main.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819125552.8888-1-colin.king@canonical.com
2021-08-21rtw88: Remove unnecessary check codeLen Baker1-5/+0
The rtw_pci_init_rx_ring function is only ever called with a fixed constant or RTK_MAX_RX_DESC_NUM for the "len" argument. Since this constant is defined as 512, the "if (len > TRX_BD_IDX_MASK)" check can never happen (TRX_BD_IDX_MASK is defined as GENMASK(11, 0) or in other words as 4095). So, remove this check. The true motivation for this patch is to silence a false Coverity warning. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210731163546.10753-1-len.baker@gmx.com
2021-08-21rtw88: wow: fix size access error of probe requestChin-Yen Lee2-2/+7
Current flow will lead to null ptr access because of trying to get the size of freed probe-request packets. We store the information of packet size into rsvd page instead and also fix the size error issue, which will cause unstable behavoir of sending probe request by wow firmware. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-6-pkshih@realtek.com
2021-08-21rtw88: wow: report wow reason through mac80211 apiChin-Yen Lee1-9/+37
After waking up from WoWLAN, call ieee80211_report_wowlan_wakeup function call to report wakeup reason to userspace via nl80211. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-5-pkshih@realtek.com
2021-08-21rtw88: wow: build wow function only if CONFIG_PM is onPing-Ke Shih1-1/+1
The kernel test robot reports undefined reference after we report wakeup reason to mac80211. This is because CONFIG_PM is not defined in the testing configuration file. In fact, functions within wow.c are used if CONFIG_PM is defined, so use CONFIG_PM to decide whether we build this file or not. The reported messages are: hppa-linux-ld: drivers/net/wireless/realtek/rtw88/wow.o: in function `rtw_wow_show_wakeup_reason': >> (.text+0x6c4): undefined reference to `ieee80211_report_wowlan_wakeup' >> hppa-linux-ld: (.text+0x6e0): undefined reference to `ieee80211_report_wowlan_wakeup' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-4-pkshih@realtek.com
2021-08-21rtw88: refine the setting of rsvd pages for different firmwareChin-Yen Lee1-23/+17
The original setting of rsvd pages is compilcated and lead to error for connecting to AP after resuming from pno mode. We refine the setting based on different firmware and the link state to avoid it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-3-pkshih@realtek.com
2021-08-21rtw88: use read_poll_timeout instead of fixed sleepChin-Yen Lee1-5/+16
In current wow flow, driver calls rtw_wow_fw_start and sleep for 100ms, to wait firmware finish preliminary work and then update the value of WOWLAN_WAKE_REASON register to zero. But later firmware will start wow function with power-saving mode, in which mode the value of WOWLAN_WAKE_REASON register is 0xea. So driver may get 0xea value and return fail. We use read_poll_timeout instead to check the value to avoid this issue. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-2-pkshih@realtek.com
2021-08-21rtw88: 8822ce: set CLKREQ# signal to low during suspendChin-Yen Lee2-0/+34
We find the power sequence of system suspend flow don't meet the criteria when using 8822CE-VR chip by rfe-type 6, because the reference clock form host is sometimes late. To avoid the behavoir, we keep CLKREQ# signal to low during suspend to make sure the reference clock arrival in time. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727100503.31626-1-pkshih@realtek.com
2021-08-21rtw88: change beacon filter default modePo-Hao Huang1-1/+1
Finetune parameter for firmware. Previous mode neglects environment impacts and could lead to performance downgrade in some cases. This new mode makes fw adapts better under noisy environment. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210713104524.47101-3-pkshih@realtek.com
2021-08-21rtw88: 8822c: add tx stbc support under HT modePo-Hao Huang3-0/+9
Enabling this improves tx performance for long distance transmission. We used to enable stbc by the rx stbc cap of the associated station. But rx cap will be masked out in ieee80211_ht_cap_ie_to_sta_ht_cap if we do not declare tx stbc. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210713104524.47101-2-pkshih@realtek.com
2021-08-21rtw88: adjust the log level for failure of tx reportChin-Yen Lee1-1/+1
We find that some disconnect events are related to failure of tx report, so increase log level to improve debuggability. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210713104524.47101-1-pkshih@realtek.com
2021-08-21rtl8xxxu: Fix the handling of TX A-MPDU aggregationChris Chiu2-9/+26
The TX A-MPDU aggregation is not handled in the driver since the ieee80211_start_tx_ba_session has never been started properly. Start and stop the TX BA session by tracking the TX aggregation status of each TID. Fix the ampdu_action and the tx descriptor accordingly with the given TID. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804151325.86600-1-chris.chiu@canonical.com
2021-08-21rtl8xxxu: disable interrupt_in transfer for 8188cu and 8192cuChris Chiu1-2/+2
There will be crazy numbers of interrupts triggered by 8188cu and 8192cu module, around 8000~10000 interrupts per second, on the usb host controller. Compare with the vendor driver source code, it's mapping to the configuration CONFIG_USB_INTERRUPT_IN_PIPE and it is disabled by default. Since the interrupt transfer is neither used for TX/RX nor H2C commands. Disable it to avoid the excessive amount of interrupts for the 8188cu and 8192cu module which I only have for verification. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: reto.schneider@husqvarnagroup.com Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210701163354.118403-1-chris.chiu@canonical.com
2021-08-21mwifiex: make arrays static const, makes object smallerColin Ian King1-2/+2
Don't populate the arrays wpa_oui and wps_oui on the stack but instead them static const. Makes the object code smaller by 63 bytes: Before: text data bss dec hex filename 29453 5451 64 34968 8898 .../wireless/marvell/mwifiex/sta_ioctl.o After: text data bss dec hex filename 29356 5611 64 35031 88d7 ../wireless/marvell/mwifiex/sta_ioctl.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819121651.7566-1-colin.king@canonical.com
2021-08-21mwifiex: usb: Replace one-element array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210809211134.GA22488@embeddedor
2021-08-21mwifiex: drop redundant null-pointer check in mwifiex_dnld_cmd_to_fw()Tuo Li1-1/+1
There is no case in which the variable cmd_node->cmd_skb has no ->data, and thus the variable host_cmd is guaranteed to be not NULL. Therefore, the null-pointer check is redundant and can be dropped. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804020305.29812-1-islituo@gmail.com
2021-08-21wilc1000: remove redundant codewengjianfeng1-22/+16
Some of the code is redundant, so goto statements are used to remove them Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210705023731.31496-1-samirweng1979@163.com
2021-08-21wilc1000: use devm_clk_get_optional()Claudiu Beznea2-16/+13
Use devm_clk_get_optional() for rtc clock: it simplifies a bit the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-4-claudiu.beznea@microchip.com
2021-08-21wilc1000: dispose irq on failure pathClaudiu Beznea1-2/+3
Dispose IRQ on failure path. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-3-claudiu.beznea@microchip.com
2021-08-21wilc1000: use goto labels on error pathClaudiu Beznea2-12/+20
Use goto labels on error path for probe functions. This makes code easier to read. With this introduce also netdev_cleanup and call it where necessary. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-2-claudiu.beznea@microchip.com
2021-08-21rtlwifi: rtl8192de: make arrays static const, makes object smallerColin Ian King1-28/+20
Don't populate arrays the stack but instead make them static const. Replace array channel_info with channel_all since it contains the same data as channel_all. Makes object code smaller by 961 bytes. Before: text data bss dec hex filename 128147 44250 1024 173421 2a56d ../realtek/rtlwifi/rtl8192de/phy.o After text data bss dec hex filename 127122 44314 1024 172460 2a1ac ../realtek/rtlwifi/rtl8192de/phy.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210803144949.79433-2-colin.king@canonical.com
2021-08-21rtlwifi: rtl8192de: Remove redundant variable initializationsColin Ian King1-2/+2
The variables rtstatus and place are being initialized with a values that are never read, the initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210803144949.79433-1-colin.king@canonical.com
2021-08-21rsi: fix an error code in rsi_probe()Dan Carpenter1-0/+1
Return -ENODEV instead of success for unsupported devices. Fixes: 54fdb318c111 ("rsi: add new device model for 9116") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210816183947.GA2119@kili
2021-08-21rsi: fix error code in rsi_load_9116_firmware()Dan Carpenter1-1/+3
This code returns success if the kmemdup() fails, but obviously it should return -ENOMEM instead. Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210805103746.GA26417@kili
2021-08-21ray_cs: Split memcpy() to avoid bounds check warningKees Cook1-1/+3
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Split memcpy() for each address range to help memcpy() correctly reason about the bounds checking. Avoids the future warning: In function 'fortify_memcpy_chk', inlined from 'memcpy_toio' at ./include/asm-generic/io.h:1204:2, inlined from 'ray_build_header.constprop' at drivers/net/wireless/ray_cs.c:984:3: ./include/linux/fortify-string.h:285:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 285 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819202825.3545692-4-keescook@chromium.org
2021-08-21ipw2x00: Avoid field-overflowing memcpy()Kees Cook1-39/+17
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. libipw_read_qos_param_element() copies a struct libipw_info_element into a struct libipw_qos_information_element, but is actually wanting to copy into the larger struct libipw_qos_parameter_info (the contents of ac_params_record[] is later examined). Refactor the routine to perform centralized checks, and copy the entire contents directly (since the id and len members match the elementID and length members): struct libipw_info_element { u8 id; u8 len; u8 data[]; } __packed; struct libipw_qos_information_element { u8 elementID; u8 length; u8 qui[QOS_OUI_LEN]; u8 qui_type; u8 qui_subtype; u8 version; u8 ac_info; } __packed; struct libipw_qos_parameter_info { struct libipw_qos_information_element info_element; u8 reserved; struct libipw_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; } __packed; Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819202825.3545692-2-keescook@chromium.org
2021-08-21ipw2x00: Use struct_size helper instead of open-coded arithmeticLen Baker1-2/+2
Dynamic size calculations (especially multiplication) should not be performed in memory allocator function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. To avoid this scenario, use the struct_size helper. Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210717142513.5411-1-len.baker@gmx.com
2021-08-21ray_cs: use %*ph to print small bufferAndy Shevchenko1-3/+1
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210712142943.23981-1-andriy.shevchenko@linux.intel.com
2021-08-21brcmfmac: add 43752 SDIO ids and initializationAngus Ainslie4-2/+11
Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca
2021-08-21brcmfmac: Set SDIO workqueue as WQ_HIGHPRISean Anderson1-1/+1
This puts tasks submitted to the SDIO workqueue at the head of the queue and runs them immediately. This gets higher RX throughput with the SDIO bus. This was originally submitted as [1]. The original author Wright Feng reports > throughput result with 43455(11ac) on 1 core 1.6 Ghz platform is > Without WQ_HIGGPRI TX/RX: 293/301 (mbps) > With WQ_HIGHPRI TX/RX: 293/321 (mbps) I tested this with a 43364(11bgn) on a 1 core 800 MHz platform and got Without WQ_HIGHPRI TX/RX: 16/19 (Mbits/sec) With WQ_HIGHPRI TX/RX: 24/20 (MBits/sec) [1] https://lore.kernel.org/linux-wireless/1584604406-15452-4-git-send-email-wright.feng@cypress.com/ Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210802170904.3116223-1-sean.anderson@seco.com
2021-08-21brcmfmac: use separate firmware for 43430 revision 2Mikhail Rudenko1-2/+3
A separate firmware is needed for Broadcom 43430 revision 2. This chip can be found in e.g. certain revisions of Ampak AP6212 wireless IC. Original firmware file from IC vendor is named 'fw_bcm43436b0.bin', but brcmfmac and also btbcm drivers report chip id 43430, so requested firmware file name is 'brcmfmac43430b0-sdio.bin' in line with other 43430 revisions. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804231308.576071-1-mike.rudenko@gmail.com
2021-08-21brcmfmac: support chipsets with different core enumeration spaceArend van Spriel6-12/+29
Historically the broadcom wifi chipsets always had enumeration space containing all core information at same place. However, for new chipsets the ASIC developers moved away from that given fact. So we have to accommodate that it can differ per chipset. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-5-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: add xtlv support to firmware interface layerArend van Spriel5-6/+244
Newer firmware API require commands to use xtlv format. Add support for that in the firmware interface layer. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-4-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: increase core revision column aligning core listArend van Spriel1-1/+1
Some cores are getting a revision greater that 99 thus messing up the column alignment in the list of cores. So adding a digit for the core revision. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-3-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: use different error value for invalid ram base addressArend van Spriel1-3/+5
The function brcmf_chip_tcm_rambase() returns 0 as invalid ram base address. However, upcoming chips have ram base address starting at zero so we have to find a more appropriate invalid value to return. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-2-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: firmware: Fix firmware loadingLinus Walleij2-6/+21
The patch that would first try the board-specific firmware had a bug because the fallback would not be called: the asynchronous interface is used meaning request_firmware_nowait() returns 0 immediately. Harden the firmware loading like this: - If we cannot build an alt_path (like if no board_type is specified) just request the first firmware without any suffix, like in the past. - If the lookup of a board specific firmware fails, we get a NULL fw in the async callback, so just try again without the alt_path from a dedicated brcm_fw_request_done_alt_path callback. - Drop the unnecessary prototype of brcm_fw_request_done. - Added MODULE_FIRMWARE match for per-board SDIO bins, making userspace tools to pull all the relevant firmware files. Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries") Cc: Stefan Hansson <newbyte@disroot.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210808180510.8753-1-digetx@gmail.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 19:50:52 +0300