summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-11-07wil6210: wmi: Correct misnamed function parameter 'ptr_'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block' drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Excess function parameter 'ptr' description in 'wmi_buffer_block' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-2-lee.jones@linaro.org
2020-11-07wcn36xx: Enable firmware offloaded keepaliveBryan O'Donoghue1-0/+1
This patch calls wcn36xx_smd_keep_alive_req() on the STA patch immediately after associating with an AP. This will cause the firmware to send a NULL packet out to the AP every 30 seconds, thus offloading keep-alive processing from the SoC to the firmware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-4-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Enable firmware link monitoringBryan O'Donoghue1-0/+1
This patch switches on CONNECTION_MONITOR. Once done it is up to the firmware to send keep alive and to monitor the link state. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-3-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Set LINK_FAIL_TX_CNT to 1000 on all wcn36xxBryan O'Donoghue1-1/+2
The firmware parameter LINK_FAIL_TX_CNT maps to the prima configuration file parameter gLinkFailTxCnt and is described as: quote: " If within gLinkFailTimeout period(values is mentioned in msec) if FW doesn't receive acks for gLinkFailTxCnt number of packets, then link will be disconnected." The downstream description sets a minimum value of 1000 a maximum value of 60000 and a default value of 6000, however it appears that unless we actually set this value deliberately firmware defaults it to 0. Setting this value to non-zero results in the firmware doing link monitoring. The working example from downstream paradoxically sets the value to 200, here we opt to set the value to the minimum stipulated in the configuration file 1000. In conjunction with ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR); this change effects offload of link monitoring to the firmware. Tested with: 'CNSS-PR-2-0-1-2-c1-74-130449-3' wcn3620 'CNSS-PR-2-0-1-2-c1-00083' wcn3680 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-2-bryan.odonoghue@linaro.org
2020-11-07ath6kl: fix enum-conversion warningArnd Bergmann1-2/+2
gcc -Wextra points out a type mismatch drivers/net/wireless/ath/ath6kl/wmi.c: In function 'ath6kl_wmi_cmd_send': drivers/net/wireless/ath/ath6kl/wmi.c:1825:19: warning: implicit conversion from 'enum <anonymous>' to 'enum wmi_data_hdr_data_type' [-Wenum-conversion] 1825 | false, false, 0, NULL, if_idx); | ^~~~~ As far as I can tell, the numeric value is current here, so just use the correct enum literal instead of 'false'. Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-9-arnd@kernel.org
2020-11-07ath9k: dynack: Demote non-compliant function headerLee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'old' not described in 'ath_dynack_ewma' drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'new' not described in 'ath_dynack_ewma' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-40-lee.jones@linaro.org
2020-11-07ath9k: ar5008_phy: Demote half completed function headersLee Jones1-12/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'rfBuf' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'reg32' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'numBits' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'firstBit' not described in 'ar5008_hw_phy_modify_rx_buffer' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-21-lee.jones@linaro.org
2020-11-07ath9k: ar9003_2p2_initvals: Remove unused const variablesLee Jones1-14/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1734:18: warning: ‘ar9300PciePhy_clkreq_disable_L1_2p2’ defined but not used [-Wunused-const-variable=] drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1727:18: warning: ‘ar9300PciePhy_clkreq_enable_L1_2p2’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-14-lee.jones@linaro.org
2020-11-07ath9k: ar9485_initvals: Remove unused const variable ↵Lee Jones1-7/+0
'ar9485_fast_clock_1_1_baseband_postamble' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9485_initvals.h:1009:18: warning: ‘ar9485_fast_clock_1_1_baseband_postamble’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-13-lee.jones@linaro.org
2020-11-07ath9k: ar9340_initvals: Remove unused const variable ↵Lee Jones1-101/+0
'ar9340Modes_ub124_tx_gain_table_1p0' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9340_initvals.h:624:18: warning: ‘ar9340Modes_ub124_tx_gain_table_1p0’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-12-lee.jones@linaro.org
2020-11-07ath9k: ar9330_1p1_initvals: Remove unused const variable ↵Lee Jones1-7/+0
'ar9331_common_tx_gain_offset1_1' Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h:1013:18: warning: ‘ar9331_common_tx_gain_offset1_1’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-11-lee.jones@linaro.org
2020-11-07ath: dfs_pri_detector: Demote zero/half completed kernel-doc headersLee Jones1-5/+4
There are only a couple of these and none of them are conformant. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/dfs_pri_detector.c:39: warning: Function parameter or member 'head' not described in 'pulse_elem' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'val' not described in 'pde_get_multiple' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'fraction' not described in 'pde_get_multiple' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'tolerance' not described in 'pde_get_multiple' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-23-lee.jones@linaro.org
2020-11-07ath: dfs_pattern_detector: Fix some function kernel-doc headersLee Jones1-6/+8
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/dfs_pattern_detector.c:34: warning: Function parameter or member 'region' not described in 'radar_types' drivers/net/wireless/ath/dfs_pattern_detector.c:141: warning: Function parameter or member 'region' not described in 'get_dfs_domain_radar_types' drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'dpd' not described in 'channel_detector_get' drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'freq' not described in 'channel_detector_get' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-22-lee.jones@linaro.org
2020-11-07ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' paramLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/regd.c:378: warning: Function parameter or member 'reg' not described in 'ath_reg_apply_ir_flags' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-20-lee.jones@linaro.org
2020-11-07ath11k: Add new dfs region name for JPLavanya Suresh2-0/+2
Japan has new Radar types as per latest regulatory, included under MKK_N in FW. So adding new enum in ath11k to support it. Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604563475-5782-1-git-send-email-lavaks@codeaurora.org
2020-11-07ath11k: fix wmi init configurationKarthikeyan Periyasamy1-2/+2
Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to the hw IPQ8074. Also update the correct TWT radio count. Incorrect TWT radio count cause TWT feature fails on radio2 because physical device count is hardcoded to 2. so set the value dynamically. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params") Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604512020-25197-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix the hal descriptor maskKarthikeyan Periyasamy1-3/+3
Below listed hal descriptor mask are incorrect, so modify it to correct one - CE destination status description meta info mask is increased from 8 bits to 16 bits from the 0th bit position - Rx Reo queue duplicate count mask is decreased from 22 bits to 16 bits - Reo threshold status counter sum mask is increased from 24 bits to 26 bits No functionality impact, these descriptors are currently not used in any supported platform. But in future if someone referred these descriptor then ended with wrong values. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604511921-24840-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix single phy hw modeKarthikeyan Periyasamy1-3/+0
driver not able to bootup in the single radio configured board. single phy hw mode is converted to invalid hw mode and sent to FW through wmi init cmd. In that case driver is not receiving wmi ready event which leads to driver bootup fail. single phy hw mode is a valid for single radio configured board. so removed the conversion logic. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604511331-22477-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix number of rules in filtered ETSI regdomainSven Eckelmann1-2/+3
The ath11k code will try to insert wheather rader related limits when the DFS region is set to ETSI. For this reason, it will add two more entries in the array of reg_rules. But the 2.4.0.1 firmware is prefiltering the list of reg rules it returns for 2.4GHz PHYs. They will then not contain the list of 5GHz rules and thus no wheather radar band rules were inserted by this code. But the code didn't fix the n_reg_rules for this regulatory domain and PHY when this happened. This resulted in a rejection by is_valid_rd because it found rules which start and end at 0khz. This resulted in a splat like: Invalid regulatory domain detected ------------[ cut here ]------------ WARNING: at backports-20200628-4.4.60-9a94b73e75/net/wireless/reg.c:3721 [...] ath11k c000000.wifi1: failed to perform regd update : -22 The number of rules must therefore be saved after they were converted from the ath11k format to the ieee80211_regdomain format and not before. Tested with IPQ8074 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030101940.2387952-1-sven@narfation.org
2020-11-07ath11k: Remove unused param from wmi_mgmt_paramsGovind Singh1-1/+0
qdf_ctx is not used in wmi_mgmt_params, remove this un-used variable. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603339175-12706-1-git-send-email-govinds@codeaurora.org
2020-11-07ath11k: Initialize complete alpha2 for regulatory changeSven Eckelmann1-0/+1
The function ath11k_wmi_send_init_country_cmd is taking 3 byte from alpha2 of the structure wmi_init_country_params. But the function ath11k_reg_notifier is only initializing 2 bytes. The third byte is therefore always an uninitialized value. The command can happen to look like 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 f8 00 instead of 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 00 00 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201021140555.4114715-1-sven@narfation.org
2020-11-07ath11k: cold boot calibration supportGovindaraj Saminathan6-7/+100
cold boot calibration is the process to calibrate all the channels during the boot-up to avoid the calibration delay during the channel change. During the boot-up, firmware started in cold boot calibration mode Firmware calibrate all channels and generate CalDb(DDR). Subsequent wifi bringup will reuse the same CalDb. Firmware is restarted in normal mode to continue the normal operation. caldb memory address send to firmware through the QMI message.Firmware use this address to store the caldb data and use it until next reboot. This will give the improvement during the channel change. But it is increasing the boot-up time(up to 15sec depend on number of radios). So if the user want to reduce the boot-up time and accepting for channel change delay, user can disable this feature using the module param cold_boot_cal=0. Tested-on: IPQ8074 WLAN.HK.2.4.0.1-01162-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Co-developed-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1602862111-14063-1-git-send-email-ssreeela@codeaurora.org
2020-11-07ath11k: search DT for qcom,ath11k-calibration-variantSven Eckelmann4-2/+41
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on IPQ6018 using bus, qmi-chip-id and qmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. This problem was already solved on ath10k by adding a ",variant=.*" at the end of the board name. The same functionality must also be provided for ath11k. The device tree requires an additional string to define the variant name wifi@c000000 { status = "okay"; qcom,ath11k-calibration-variant = "Cigtech-WF-188"; }; This would create the boarddata identifier for the board-2.bin search * bus=ahb,qmi-chip-id=0,qmi-board-id=18,variant=Cigtech-WF-188 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015131501.1939685-2-sven@narfation.org
2020-11-07ath11k: Remove unnecessary data sync to cpu on monitor bufferVasanthakumar Thiagarajan1-4/+0
Monitor ring Rx buffer is not really modified between dma map and unmap. So remove the unnecssary data sync before dma unmap. This does not fix any visible issue, found in code review. Compile tested only. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1602744454-22969-1-git-send-email-vthiagar@codeaurora.org
2020-11-07ath11k: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007103309.363737-4-allen.lkml@gmail.com
2020-11-07ath10k: cancel rx worker in hif_stop for SDIOWen Gong1-0/+6
The rx worker of SDIO should be cancelled after disable interrupt, and release rx sk_buff in queue, otherwise the rx worker maybe still run after hif_stop. And it should be cancelled before napi_synchronize in hif_stop, because the rx worker of SDIO will call napi_schedule, it should have no napi_schedule before napi_synchronize, otherwise it lead napi_synchronize wait untill napi_complete. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604558036-4056-1-git-send-email-wgong@codeaurora.org
2020-11-07ath10k: Don't iterate over not-sdata-in-driver interfaces.Ben Greear4-11/+14
This fixes possible crash scenario where interfaces that were not set up in the driver yet might still be iterated over. When originally debugged on the ath10k-ct driver, the crash looked like this: kernel BUG at /home/greearb/git/linux-4.7.dev.y/drivers/net/wireless/ath/ath10k/wmi.c:1781! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: nf_conntrack_netlink nf_conntrack nfnetlink nf_defrag_ipv4 bridge carl9170 mac80211_hwsim ath10k_pci ath10k_core ath5k ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 8021q garp mrp stp llc bnep bluetooth fuse macvlan pktgen rpcsec_gss_krb5 nfsv4 nfs fscache snd_hda_codec_hdmi coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic kvm iTCO_wdt irqbypass iTCO_vendor_support joydev snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device pcspkr snd_pcm snd_timer shpchp snd i2c_i801 lpc_ich soundcore tpm_tis tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 serio_raw i2c_algo_bit drm_kms_helper ata_generic e1000e pata_acpi drm ptp pps_core i2c_core fjes video ipv6 [last unloaded: nf_conntrack] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.10+ #15 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 task: ffff8801d4f20000 ti: ffff8801d4f28000 task.ti: ffff8801d4f28000 RIP: 0010:[<ffffffffa0efbcfb>] [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core] RSP: 0018:ffff8801d6447a98 EFLAGS: 00010293 RAX: 0000000000000018 RBX: ffff8801ce97e1d8 RCX: 0000000000000000 RDX: 0000000000000018 RSI: 0000000000000003 RDI: ffffed003ac88f49 RBP: ffff8801d6447af0 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff8801ce97e320 R14: ffff8801ce97e378 R15: ffff8801ce97ca40 FS: 0000000000000000(0000) GS:ffff8801d6440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007eff191ef1ab CR3: 000000000260a000 CR4: 00000000001406e0 Stack: 1ffff1003ac88f59 0000000041b58ab3 ffffffffa0f4d52a ffff8801d4f20000 0000000000000246 0000000000000002 ffff8801ce97e1d8 ffff8801bd5d39b8 0000000000000002 0000000000000001 ffff8801ce97ca40 ffff8801d6447b48 Call Trace: <IRQ> [<ffffffffa0d03e5c>] __iterate_interfaces+0xfc/0x1d0 [mac80211] [<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core] [<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core] [<ffffffffa0d04477>] ieee80211_iterate_active_interfaces_atomic+0x67/0x100 [mac80211] [<ffffffffa0d04410>] ? ieee80211_handle_reconfig_failure+0x140/0x140 [mac80211] [<ffffffffa0ef4060>] ? ath10k_tpc_config_disp_tables+0x620/0x620 [ath10k_core] [<ffffffffa0ef408b>] ath10k_wmi_op_ep_tx_credits+0x2b/0x50 [ath10k_core] [<ffffffffa0ee2fd2>] ath10k_htc_rx_completion_handler+0x422/0x5c0 [ath10k_core] [<ffffffffa0b4301e>] ath10k_pci_process_rx_cb+0x37e/0x430 [ath10k_pci] [<ffffffffa0ee2bb0>] ? ath10k_htc_build_tx_ctrl_skb+0xc0/0xc0 [ath10k_core] [<ffffffffa0b42ca0>] ? ath10k_pci_rx_post_pipe+0x550/0x550 [ath10k_pci] [<ffffffff8120cbe5>] ? debug_lockdep_rcu_enabled+0x35/0x40 [<ffffffff811e1893>] ? mark_held_locks+0x23/0xc0 [<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0 [<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290 [<ffffffff811e1bcd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0 [<ffffffff81df11d0>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffffa0b4902e>] ? ath10k_ce_per_engine_service+0xee/0x100 [ath10k_pci] [<ffffffffa0b43139>] ath10k_pci_htt_htc_rx_cb+0x29/0x30 [ath10k_pci] [<ffffffffa0b48fe6>] ath10k_ce_per_engine_service+0xa6/0x100 [ath10k_pci] [<ffffffffa0b49116>] ath10k_ce_per_engine_service_any+0xd6/0xf0 [ath10k_pci] [<ffffffffa0b45800>] ? ath10k_pci_enable_legacy_irq+0xe0/0xe0 [ath10k_pci] [<ffffffffa0b4585f>] ath10k_pci_tasklet+0x5f/0xb0 [ath10k_pci] [<ffffffff81160445>] tasklet_action+0x245/0x2b0 [<ffffffff81df4831>] __do_softirq+0x181/0x595 [<ffffffff8116137c>] irq_exit+0xbc/0xc0 [<ffffffff81df423c>] do_IRQ+0x7c/0x150 [<ffffffff81df23cc>] common_interrupt+0x8c/0x8c <EOI> [<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290 [<ffffffff81b722ae>] ? cpuidle_enter_state+0x1ae/0x4b0 [<ffffffff81b722a7>] ? cpuidle_enter_state+0x1a7/0x4b0 [<ffffffff81b72602>] cpuidle_enter+0x12/0x20 [<ffffffff811d0b6e>] call_cpuidle+0x4e/0x90 [<ffffffff811d10e7>] cpu_startup_entry+0x3f7/0x540 [<ffffffff811d0cf0>] ? default_idle_call+0x50/0x50 [<ffffffff81234bdf>] ? clockevents_config_and_register+0x5f/0x70 [<ffffffff81085a9a>] ? setup_APIC_timer+0xfa/0x110 [<ffffffff81083b63>] start_secondary+0x253/0x2b0 [<ffffffff81083910>] ? set_cpu_sibling_map+0x920/0x920 Code: 4d 49 e0 8b b3 48 01 00 00 48 c7 c7 a0 ee f3 a0 e8 d9 c2 3f e0 49 81 fd 3f 1f 00 00 76 0f 49 81 fc 3f 1f 00 00 0f 87 c0 fd ff ff <0f> 0b 0f 0b 90 55 48 89 e5 41 57 41 56 48 8d 85 58 ff ff ff 41 RIP [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core] RSP <ffff8801d6447a98> ---[ end trace 6588464714e5163a ]--- Similar logic was tested for years in ath10k-ct driver and various firmware. Also tested with stock kernel plus this patch, with firmware 10.2.4-1.0-00037 This test case was to bring up 5 vap on a radio and fake a firmware crash. Make sure ap interfaces continue to function properly. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200922191957.25257-2-greearb@candelatech.com
2020-11-07ath10k: fix compilation warningTamizh Chelvam1-1/+2
This change fixes below compilation warning. smatch warnings: drivers/net/wireless/ath/ath10k/mac.c:9125 ath10k_mac_op_set_tid_config() error: uninitialized symbol 'ret'. No functional changes. Compile tested only. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604507837-29361-1-git-send-email-tamizhr@codeaurora.org
2020-11-06ath11k: FILS discovery and unsolicited broadcast probe response supportAloka Dixit3-0/+307
This patch adds driver support for FILS discovery and unsolicited broadcast probe response transmission features which are used for in-band discovery in 6GHz band. Currently this support is enabled only in 6GHz by setting hardware flags. Changes include WMI commands to enable transmission, set packet interval, set template, and handle events. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007204036.19780-1-alokad@codeaurora.org
2020-11-06ath10k: sdio: remove redundant check in for loopAlex Dewar1-9/+3
The for loop checks whether cur_section is NULL on every iteration, but we know it can never be NULL as there is another check towards the bottom of the loop body. Refactor to avoid this unnecessary check. Also, increment the variable i inline for clarity Addresses-Coverity: 1496984 ("Null pointer dereferences) Suggested-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200916165748.20927-1-alex.dewar90@gmail.com
2020-11-02iwlwifi: pcie: limit memory read spin timeJohannes Berg1-9/+27
When we read device memory, we lock a spinlock, write the address we want to read from the device and then spin in a loop reading the data in 32-bit quantities from another register. As the description makes clear, this is rather inefficient, incurring a PCIe bus transaction for every read. In a typical device today, we want to read 786k SMEM if it crashes, leading to 192k register reads. Occasionally, we've seen the whole loop take over 20 seconds and then triggering the soft lockup detector. Clearly, it is unreasonable to spin here for such extended periods of time. To fix this, break the loop down into an outer and an inner loop, and break out of the inner loop if more than half a second elapsed. To avoid too much overhead, check for that only every 128 reads, though there's no particular reason for that number. Then, unlock and relock to obtain NIC access again, reprogram the start address and continue. This will keep (interrupt) latencies on the CPU down to a reasonable time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
2020-11-02rtw88: fix fw_fifo_addr checkTom Rix1-1/+1
The clang build reports this warning fw.c:1485:21: warning: address of array 'rtwdev->chip->fw_fifo_addr' will always evaluate to 'true' if (!rtwdev->chip->fw_fifo_addr) { fw_fifo_addr is an array in rtw_chip_info so it is always nonzero. A better check is if the first element of the array is nonzero. In the cases where fw_fifo_addr is initialized by rtw88b and rtw88c, the first array element is 0x780. Fixes: 0fbc2f0f34cc ("rtw88: add dump firmware fifo support") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201011155438.15892-1-trix@redhat.com
2020-10-28ath11k: remove repeated words in comments and warningsKalle Valo7-10/+10
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603803705-22447-1-git-send-email-kvalo@codeaurora.org
2020-10-28ath10k: ath10k_pci_init_irq(): workaround for checkpatch fallthrough warningKalle Valo1-1/+1
Latest checkpatch complains about use of fall-through comment. But as this is a switch statement just reword the comment to workaround the problem. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603802288-21158-2-git-send-email-kvalo@codeaurora.org
2020-10-28ath10k: remove repeated words in commentsKalle Valo6-7/+7
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603802288-21158-1-git-send-email-kvalo@codeaurora.org
2020-10-16Merge tag 'net-next-5.10' of ↵Linus Torvalds533-17381/+26876
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15Merge tag 'staging-5.10-rc1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...
2020-10-14qtnfmac: use new function dev_fetch_sw_netstatsHeiner Kallweit1-22/+1
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/166259f2-084c-45d7-e610-2de2a0bdae06@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13Merge branch 'linus' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Allow DRBG testing through user-space af_alg - Add tcrypt speed testing support for keyed hashes - Add type-safe init/exit hooks for ahash Algorithms: - Mark arc4 as obsolete and pending for future removal - Mark anubis, khazad, sead and tea as obsolete - Improve boot-time xor benchmark - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity Drivers: - Fixes and enhancement for XTS in caam - Add support for XIP8001B hwrng in xiphera-trng - Add RNG and hash support in sun8i-ce/sun8i-ss - Allow imx-rngc to be used by kernel entropy pool - Use crypto engine in omap-sham - Add support for Ingenic X1830 with ingenic" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits) X.509: Fix modular build of public_key_sm2 crypto: xor - Remove unused variable count in do_xor_speed X.509: fix error return value on the failed path crypto: bcm - Verify GCM/CCM key length in setkey crypto: qat - drop input parameter from adf_enable_aer() crypto: qat - fix function parameters descriptions crypto: atmel-tdes - use semicolons rather than commas to separate statements crypto: drivers - use semicolons rather than commas to separate statements hwrng: mxc-rnga - use semicolons rather than commas to separate statements hwrng: iproc-rng200 - use semicolons rather than commas to separate statements hwrng: stm32 - use semicolons rather than commas to separate statements crypto: xor - use ktime for template benchmarking crypto: xor - defer load time benchmark to a later time crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num' crypto: hisilicon/zip - fix the return value when device is busy crypto: hisilicon/zip - fix zero length input in GZIP decompress crypto: hisilicon/zip - fix the uncleared debug registers lib/mpi: Fix unused variable warnings crypto: x86/poly1305 - Remove assignments with no effect hwrng: npcm - modify readl to readb ...
2020-10-10Merge tag 'wireless-drivers-next-2020-10-09' of ↵Jakub Kicinski66-314/+1434
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 Fourth and last set of patches for v5.10. Most of these are iwlwifi patches, but few small fixes to other drivers as well. Major changes: iwlwifi * PNVM support (platform-specific phy config data) * bump the FW API support to 59 ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09Revert "iwlwifi: remove wide_cmd_header field"Luca Coelho4-1/+9
This reverts commit 0a8159cbd11abf586693f1ec5264d0df587b71d8. It turns out that this flag is used by iwldvm, so we can't get rid of it. This broke iwldvm devices with BAD_COMMAND errors. Fixes: 0a8159cbd11a ("iwlwifi: remove wide_cmd_header field") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201009122123.3e4ee0ad7a71.Id6d95ae601f048aeb4d2ed63a1712e469da84369@changeid
2020-10-08iwlwifi: bump FW API to 59 for AX devicesLuca Coelho1-1/+1
Start supporting API version 59 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.0359498107fe.I559b5140be6abbee5eb759ec6e5ca046f7178f8f@changeid
2020-10-08iwlwifi: read and parse PNVM fileLuca Coelho5-11/+241
The driver looks for a PNVM file that contains FW configuration data for each different HW combination. The FW requests the data for a certain SKU_ID and the driver tries to find it in the PNVM file. Read the file, parse its contents and send it to the trans. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.826bc607e57a.I1d93dd6e6651586878db57fac3e7c3f09d742c42@changeid
2020-10-08iwlwifi: pcie: implement set_pnvm opLuca Coelho6-11/+58
Implement the set_pnvm op to store the PNVM settings to the context info and the corresponding code to free the DRAM block when the context is freed. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.85847cfb0972.I202d90e99779f722df14b2d4102d3e466343a6f6@changeid
2020-10-08iwlwifi: add trans op to set PNVMLuca Coelho1-0/+12
Add an op to allow setting the PNVM data in the trans. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.77300b00d3ce.I89d7e45e71f19fd36d89f363a28b4759b59b8765@changeid
2020-10-08iwlwifi: move PNVM implementation to common codeLuca Coelho4-48/+78
The PNVM code is generic and can be used by other opmodes. Move it to a common file and include it in the relevant opmodes. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.232aa310693b.I03a18ffa4162753af38e759d88e27509007c7bca@changeid
2020-10-08iwlwifi: rs: align to new TLC config command APIMordechay Goodstein2-3/+12
The new API adds 4 bytes at end of the struct. We just need to make sure that we don't break compatibility with old FWs. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.bb31ce80fc55.I8a272d1da1334b1805761c0731e5d0c76ca2ef29@changeid
2020-10-08iwlwifi: fix sar geo table initializationNaftali Goldstein3-18/+36
When adding support for version 3 of the GEO_TX_POWER_LIMIT command, the table argument of iwl_sar_geo_init was changed from a pointer a 1d array of now-removed iwl_per_chain_offset_group_v1 to a pointer to a 2d array of iwl_per_chain_offset (iwl_per_chain_offset_group_v1 was a struct containing 2 copies of iwl_per_chain_offset). So even for version 2 where the second dimension is of length 2, which means that the underlying memory layout of the array didn't change, this requires a small change in the way we loop over it, and this was missed. Additionally, for the case of version 3 where the second dimension is now 3, in order to fill the first two elements of each row correctly (lb and hb), iwl_sar_geo_init must get the true number of bands supported. But because we don't yet store any values for the 3rd (uhb) band, skip that band. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.73605b6e0548.Id0ec98333277ff9e017e3938ae413b34acc68947@changeid
2020-10-08iwlwifi: stats: add new api fields for statistics cmd/ntfyMordechay Goodstein3-60/+602
The new API uses TLV format for statistics to enable fast changes and debug on the fly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.a45fd1a34a39.I7709305a6dc7b88d0c5119b12c9251fa6c740262@changeid
2020-10-08iwlwifi: mvm: fix suspicious rcu usage warningsSara Sharon1-7/+13
mvm mutex isn't held by iwl_mvm_set_aes_rx_seq or it caller. iee80211_local->key_mtx is held, but that is internal to mac80211. The same applies to iwl_mvm_wowlan_program_keys. Just hold rcu_read_lock, even though we are protected, the penalty isn't that bad. Warnings fixed are: [ 4143.788196] WARNING: suspicious RCU usage [ 4143.788211] ----------------------------- [ 4143.788220] suspicious rcu_dereference_protected() usage! [ 4143.788227] [ 4143.788234] rcu_scheduler_active = 2, debug_locks = 1 [ 4143.788242] 5 locks held by kworker/u8:9/5921: [ 4143.788331] #4: ffff88804e69ad08 (&local->key_mtx){+.+.}, at ie80211_iter_keys+0x46/0x380 [mac80211] [ 4143.788441] [ 4143.788441] Call Trace: [ 4143.788455] dump_stack+0xc1/0x11a [ 4143.788471] lockdep_rcu_suspicious+0x14a/0x153 [ 4143.788515] iwl_mvm_set_aes_rx_seq+0x4a9/0x570 [iwlmvm] [ 4143.788657] iwl_mvm_d3_update_keys+0x2ac/0x600 [iwlmvm] [ 4143.788784] ieee80211_iter_keys+0x10e/0x380 [mac80211] [ 4143.788838] iwl_mvm_setup_connection_keep+0x287/0x8d0 [iwlmvm] [ 7243.206556] WARNING: suspicious RCU usage [ 7243.206811] ----------------------------- [ 7243.206926] /suspicious rcu_dereference_protected() usage! [ 7243.207086] [ 7243.207204] rcu_scheduler_active = 2, debug_locks = 1 [ 7243.207321] 2 locks held by cat/15952: [ 7243.207564] #1: ffff888008c8ad08 (&local->key_mtx){+.+.}, at: ieee80211_iter_keys+0x46/0x380 [mac80211] [ 7243.207751] [ 7243.208094] Call Trace: [ 7243.208211] dump_stack+0xc1/0x11a [ 7243.208355] lockdep_rcu_suspicious+0x14a/0x153 [ 7243.208509] iwl_mvm_wowlan_program_keys+0x1db7/0x2340 [iwlmvm] [ 7243.209852] ieee80211_iter_keys+0x10e/0x380 [mac80211] Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.65872d5f1670.I0b2fb2a65904ae686c3c7c05f881a1e3634dc900@changeid
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 23:58:34 +0300