summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek
AgeCommit message (Collapse)AuthorFilesLines
2019-10-01rtlwifi: prevent memory leak in rtl_usb_probeNavid Emamdoost1-1/+4
In rtl_usb_probe if allocation for usb_data fails the allocated hw should be released. In addition the allocated rtlpriv->usb_data should be released on error handling path. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-01rtlwifi: rtl8723ae: Remove unused 'rtstatus' variableAustin Kim1-3/+0
'rtstatus' local variable is not used, so remove it for clean-up. Signed-off-by: Austin Kim <austindh.kim@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-01rtw88: 8822c: fix boolreturn.cocci warningsYan-Hsuan Chuang1-3/+3
drivers/net/wireless/realtek/rtw88/rtw8822c.c:2606:9-10: WARNING: return of 0/1 in function 'rtw8822c_dpk_coef_iq_check' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: 5227c2ee453d ("rtw88: 8822c: add SW DPK support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24rtw88: configure firmware after HCI startedYan-Hsuan Chuang2-3/+4
After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: release tx skbs DMAed when stopYan-Hsuan Chuang1-0/+12
Interrupt is disabled to stop PCI, which means the skbs queued for each TX ring will not be released via DMA interrupt. To avoid those skbs remained being left in the skb queue until PCI has been removed, driver needs to release skbs by itself. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: extract skbs free routine for trx ringsYan-Hsuan Chuang1-10/+26
These skbs free routines could be used when driver wants to stop PCI bus, because some of the skbs remained in the queue may not have been returned via DMA interrupt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: report RX power for each antennaYan-Hsuan Chuang3-3/+9
Report chains and chain_signal in ieee80211_rx_status. It is useful for program such as tcpdump to see if the antennas are well connected/placed. 8822C is able to receive CCK rates with 2 antennas, while 8822B can only use 1 antenna path to receive CCK rates. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: fix wrong rx power calculationTsang-Shian Lin1-2/+2
Fix the wrong RF path for CCK rx power calculation. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic versionMichael Straube1-16/+2
Function _rtl92d_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92d_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube1-17/+1
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube1-22/+1
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: allows to receive AMSDU in AMPDUYan-Hsuan Chuang1-0/+1
The hardware has enough buffer to receive like 8K for an MPDU. So tell mac80211 that we can receive AMSDU in AMPDU. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: add dynamic cck pd mechanismTzu-En Huang4-0/+188
This mechanism reduces the numbers of false alram in cck rate by dynamically adjusting the value of power threshold and cs_ratio. We determine the new value by three factors, which are rssi, false alarm count and igi. Based on these factors, we define the current condition into five levels. Compared to the previous level, if the level is changed, we set the new values for power threshold and cs_ratio. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: move IQK/DPK into phy_calibrationYan-Hsuan Chuang4-8/+12
Since 8822c requires to do not only IQK, but also DPK. Move these calibrations that need to be done once the channel is determined, into phy_calibration. And note that the order of the calibrations matters, 8822c should do IQK first, then DPK. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add SW DPK supportTzu-En Huang10-1637/+3320
Power amplifiers are not linear components, and require DPK to reduce its nonlinearity. DPK is called Digital Pre-distortion Calibration, can be used to compensate the output of power. DPK tracking is in charge of tracking the thermal changes. And it then shifts the power curve accordingly, which makes the power output remains linear even if the PA works in different temperature. To perform DPK, the parameter table should also be updated. And the table will be applied when device is powered on. Then DPK will reference the values to calibrate. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add FW IQK supportYan-Hsuan Chuang2-0/+18
Add support for doing IQK in firmware Ideally the RF component's I/Q vectors should be orthogonal, but usually they are not. So we need to calibrate for the RF components, ex. PA/LNA, ADC/DAC. And if the I/Q vectors are more orthogonal, the mixed signal will have less deviation. This helps with those rates with higher modulation (MCS8-9), because they have more strict EVM/SNR requirement. Also the better of the quality of the signal, the longer it can propagate, and the better throughput performance we can get. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: Enable interrupt migrationTsang-Shian Lin2-0/+6
Enable 8822C Tx/Rx interrupt migration. In some platforms, performance test may cause heavy cpu loading and get bad results. Interrupt migration can decrease the amount of interrupts, and lower cpu loading. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update pwr_seq to v13Chin-Yen Lee1-0/+10
update sequence to v13 to reduce power consumption when MAC power off Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update PHY parameter to v38Yan-Hsuan Chuang1-380/+2690
Update PHY hardware parameters to v38. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some ↵Larry Finger6-182/+0
unused bit manipulation macros Each of these drivers defines some device to host macros that are never used, thus they can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert inline routines to little-endian wordsLarry Finger2-169/+175
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert macros that set descriptorLarry Finger2-272/+470
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Replace local bit manipulation macrosLarry Finger1-75/+74
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macrosLarry Finger1-165/+2
iAs the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert inline routines to little-endian wordsLarry Finger2-134/+140
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert macros that set descriptorLarry Finger2-245/+411
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl reports lines too long are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Replace local bit manipulation macrosLarry Finger1-62/+62
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Remove unused GET_XXX and SET_XXX macrosLarry Finger1-332/+4
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8821ae: make array static const and remove redundant assignmentColin Ian King1-2/+2
The array channel_all can be make static const rather than populating it on the stack, this makes the code smaller. Also, variable place is being initialized with a value that is never read, so this assignment is redundant and can be removed. Before: text data bss dec hex filename 118537 9591 0 128128 1f480 realtek/rtlwifi/rtl8821ae/phy.o After: text data bss dec hex filename 118331 9687 0 128018 1f412 realtek/rtlwifi/rtl8821ae/phy.o Saves 110 bytes, (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-06rtlwifi: Fix file release memory leakWei Yongjun1-1/+1
When using single_open() for opening, single_release() should be used instead of seq_release(), otherwise there is a memory leak. This is detected by Coccinelle semantic patch. Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-06rtw88: fix seq_file memory leakWei Yongjun1-1/+1
When using single_open(), single_release() should be used instead of seq_release(), otherwise there is a memory leak. This is detected by Coccinelle semantic patch. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtw88: pci: enable MSI interruptYu-Yen Ting1-5/+43
MSI interrupt should be enabled on certain platform. Add a module parameter disable_msi to disable MSI interrupt, driver will then use legacy interrupt instead. One could rebind the PCI device, probe() will pick up the new value of the module parameter. Such as: echo '0000:01:00.0' > /sys/bus/pci/drivers/rtw_pci/unbind echo '0000:01:00.0' > /sys/bus/pci/drivers/rtw_pci/bind Tested-by: Ján Veselý <jano.vesely@gmail.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Yu-Yen Ting <steventing@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtw88: pci: Move a mass of jobs in hw IRQ to soft IRQJian-Hong Pan1-6/+26
There is a mass of jobs between spin lock and unlock in the hardware IRQ which will occupy much time originally. To make system work more efficiently, this patch moves the jobs to the soft IRQ (bottom half) to reduce the time in hardware IRQ. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtw88: remove redundant assignment to pointer debugfs_topdirColin Ian King1-1/+1
Pointer debugfs_topdir is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtw88: drop unused rtw_coex_coex_dm_reset()Guenter Roeck1-5/+0
0day reports: sparse warnings: drivers/net/wireless/realtek/rtw88/coex.c:2457:6: sparse: symbol 'rtw_coex_coex_dm_reset' was not declared. Should it be static? rtw_coex_coex_dm_reset() is not called. Remove it. Fixes: 4136214f7c46 ("rtw88: add BT co-existence support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtw88: Fix an error messageDan Carpenter1-1/+1
The WARN_ON() macro takes a condition, not a warning message. I've changed this to use WARN() instead. Fixes: 4136214f7c46 ("rtw88: add BT co-existence support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ce: Fix incorrect returned valuesLarry Finger1-3/+3
In commit 98fd8db59a00 ("rtlwifi: rtl8192ce: Convert macros that set descriptor"), all the routines that get fields from a descriptor were changed to return signed integer values. This is incorrect for the routines that get the entire 32-bit word. In this case, an unsigned quantity is required. Fixes: 98fd8db59a00 ("rtlwifi: rtl8192ce: Convert macros that set descriptor") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8188ee: Fix incorrect returned valuesLarry Finger1-7/+7
In commit 36eda7568f2e ("rtlwifi: rtl8188ee: Convert macros that set descriptor"), all the routines that get fields from a descriptor were changed to return signed integer values. This is incorrect for the routines that get the entire 32-bit word. In this case, an unsigned quantity is required. Fixes: 36eda7568f2e ("rtlwifi: rtl8188ee: Convert macros that set descriptor") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8821ae: Fix incorrect returned valuesLarry Finger1-5/+5
In commit bd421dab7515 ("rtlwifi: rtl8821ae: Convert macros that set descriptor"), all the routines that get fields from a descriptor were changed to return signed integer values. This is incorrect for the routines that get the entire 32-bit word. In this case, an unsigned quantity is required. Fixes: bd421dab7515 ("rtlwifi: rtl8821ae: Convert macros that set descriptor") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192cu: Convert inline routines to little-endian wordsLarry Finger3-121/+127
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192cu: Convert macros that set descriptorLarry Finger3-235/+402
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast and other warnings are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192cu: Replace local bit manipulation macrosLarry Finger1-55/+55
This driver uses a set of local macros to manipulate the TX and RX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192cu: Remove unused GET_XXX and SET_XXXLarry Finger1-147/+3
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Remove some variable initializationsLarry Finger1-12/+14
A number of variables are initialized when declared that set later in the routine, thus the initialization can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Convert inline routines to little-endian wordsLarry Finger2-194/+203
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Convert macros that set descriptorLarry Finger2-307/+550
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl reports lines too long are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Replace local bit manipulation macrosLarry Finger1-84/+84
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl8192ee: Remove unused GET_XXX and SET_XXXLarry Finger1-241/+2
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: rtl_pci: Fix memory leak when hardware init failsLarry Finger1-0/+2
If the call to hw_init() fails for any of the drivers, the driver will leak memory that was allocated in BT coexistence setup. Technically, each of the drivers should have done this free; however placing it in rtl_pci fixes all the drivers with only a single patch. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: remove unused variables 'RTL8712_SDIO_EFUSE_TABLE' and 'MAX_PGPKT_SIZE'YueHaibing1-17/+0
drivers/net/wireless/realtek/rtlwifi/efuse.c:16:31: warning: RTL8712_SDIO_EFUSE_TABLE defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/efuse.c:9:17: warning: MAX_PGPKT_SIZE defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 04:50:46 +0300