summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/ioctl.h
AgeCommit message (Collapse)AuthorFilesLines
2012-09-28mwifiex: add inactivity deauth support for apKevin Gan1-0/+2
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: parse rate info for APAvinash Patil1-1/+6
This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: pass key_params pointer in mwifiex_set_encodeYing Luo1-0/+1
'cipher' and 'seq' coming from cfg80211 add_key handler will be parsed in mwifiex_set_encode() to handle AES_CMAC cipher suite. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: rename wapi_rxpn to pnYing Luo1-2/+2
This array was used for wapi_rxpn only. Now it will be used for AES_CMAC as well. So make a generic name for it. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17mwifiex: remove unnecessary code in data rate configurationAmitkumar Karwar1-6/+0
1) Remove unnecessary wrapper functions. 2) Currently we don't have command to set Tx data rate, so mwifiex_rate_ioctl_set_rate_value() function and related code can be removed. 3) "ds_rate" filled by mwifiex_ret_tx_rate_cfg() is never used. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10mwifiex: add set_antenna handler supportAmitkumar Karwar1-0/+5
This enables user to set mode of Tx/Rx path using "iw set antenna" command. For non MIMO chips, the command will be used for selecting specific antenna or configuring antenna diversity mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20mwifiex: support for WEP in AP modeAvinash Patil1-0/+9
This patch adds support for WEP open/shared encryption in AP mode. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20mwifiex: set HT capability based on cfg80211_ap_settingsAvinash Patil1-0/+1
Parse HT IE from cfg80211 and set HT capabilities accordingly to FW. If HT IE is missing, 11n would be disabled in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add custom IE frameworkAvinash Patil1-0/+2
1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add WPA2 support for APAvinash Patil1-0/+16
1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add cfg80211 start_ap and stop_ap handlersAvinash Patil1-0/+5
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interfaceAvinash Patil1-0/+3
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP command sys_config and set channelAvinash Patil1-0/+6
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: add support for WPS2.0Avinash Patil1-0/+1
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: display correct country information in debugfs "info"Amitkumar Karwar1-1/+1
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mwifiex: add set_cqm_rssi_config handler supportAmitkumar Karwar1-0/+21
In this handler LOW_RSSI and HIGH_RSSI events are subscribed to FW using provided threshold value so that FW will monitor connection quality and trigger any of these events. Driver will notify cfg80211 about connection quality based on inputs from FW and provided hysteresis. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mwifiex: remove redundant signal handling codeAmitkumar Karwar1-28/+0
1) The wrapper function mwifiex_get_signal_info() is unnecessary. 2) As noise and signal vaules in private structure already get modified, we don't need to explicitly pass "struct mwifiex_ds_get_signal" to get it filled. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mwifiex: remove unnecessary struct mwifiex_802_11_ssidAmitkumar Karwar1-2/+2
Use struct cfg80211_ssid available in include/net/cfg80211.h instead of having similar definition in driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mwifiex: use IEEE80211_HT_PARAM_CHA_SEC_* macrosAmitkumar Karwar1-4/+0
Replace driver specific macros with the corresponding IEEE80211_HT_PARAM_CHA_SEC_* macros defined in ieee80211.h. Also, rename 'adapter->chan_offset' to 'adapter->sec_chan_offset' for consistency. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-22mwifiex: remove redundant band config codeAmitkumar Karwar1-7/+0
struct mwifiex_ds_band_cfg and mwifiex_set_radio_band_cfg() routine are unnecessary. It can be done with simple equivalant code. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove redundant variable scan_table_idxBing Zhao1-1/+0
mwifiex_get_bss_info() routine updates variable 'info->scan_table_idx' but it is never used. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: remove wireless.h inclusion and fix resulting bugsBing Zhao1-2/+3
replace IW_MAX_AP & IW_CUSTOM_MAX with local definitions and remove usage of struct iw_statistics. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08mwifiex: add wext includeJohannes Berg1-0/+1
In trying to remove the wext includes from mac80211 and cfg80211 I found that mwifiex currently uses them. This is wrong, it shouldn't, but to not break it completely include wext there. Please remove this and fix all the resulting bugs. Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-21mwifiex: disable auto deep sleep before unloading the driverAmitkumar Karwar1-0/+1
Since the auto deep sleep mode has been enabled at driver init time we should disable it at driver unloading to shutdown the function gracefully. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mwifiex: cleanup ioctl.hBing Zhao1-80/+1
Some structures and macros in ioctl.h are redundant or no longer used. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19mwifiex: remove some macro definitionsAmitkumar Karwar1-2/+1
use corresponding macros defined in include/linux/ieee80211.h Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mwifiex: remove redundant encryption_mode mappingYogesh Ashok Powar1-8/+0
remove MWIFIEX_ENCRYPTION_MODE_ and use WLAN_CIPHER_SUITE_ macros directly Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove unused radio_on variable and macrosMarc Yang1-1/+0
The radio_on variable is defined but never used. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove MWIFIEX_AUTH_MODE_ macrosMarc Yang1-5/+0
replace them with NL80211_AUTHTYPE_ macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove MWIFIEX_BSS_MODE_ macrosBing Zhao1-6/+0
replace them with NL80211_IFTYPE_ macros Also remove redundant functions mwifiex_drv_get_mode() and mwifiex_bss_ioctl_mode(). Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove unnecessary _set_auth functionsMarc Yang1-2/+0
mwifiex_set_encrypt_mode() mwifiex_set_auth_mode() mwifiex_set_auth() These functions are confusing and misleading. And they are really not needed at all. Some unused definitions are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30wireless: mwifiex: initial commit for Marvell mwifiex driverBing Zhao1-0/+433
This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-08 04:49:22 +0300