summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21mt76: mt7615: load ROM patch before checking patch semaphore statusFelix Fietkau1-14/+16
For MT7663, the availability of the patch files is used to detect, which corresponding firmware is going to be used (AP firmware or STA offload firmware). If the ROM patch was already applied, it could attempt to load the wrong firmware (without considering the alternative). Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix entering driver-own state on mt7663Felix Fietkau1-2/+10
Fixes hardware wakeup issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix hardware error recovery for mt7663Felix Fietkau5-11/+53
MT7663 uses different bits for communicating reset commands/status between MCU and host. Also add an extra initial reset command. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add dumping Tx power tableSean Wang5-0/+151
Dump the tx power table saved in offload firmware. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: introduce single-sku support for mt7663/mt7921Lorenzo Bianconi6-1/+170
Introduce support for rate-txpower compensation for mt7663/mt7921 chipsets. Rate-txpower limit is specified through dts Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: do not use mt7615 single-sku values for mt7663Lorenzo Bianconi1-0/+5
mt7663 mcu relies on different APIs to configure APIs per-rate power limit respect to mt7615 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: implement support for using DT rate power limitsFelix Fietkau2-2/+69
Limits are used to update the channel max_power settings and also passed to the firmware on channel changes Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: extend DT rate power limits to support 11ax devicesShayne Chen2-23/+40
Enable parsing per-rate txpower limits from DT for 11ax chipsets. Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: add functions for parsing rate power limits from DTFelix Fietkau2-0/+216
This subnode can be used to set per-rate tx power limits either per country code / regdomain or globally. These limits are typically provided by the device manufacturers and are used to limit sideband emissions and stay within regulatory limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: flush tx status queue on DMA resetFelix Fietkau5-0/+10
After DMA reset, tx status information for queued frames will never arrive. Flush the queue to free skbs immediately instead of waiting for a timeout Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_deviceLorenzo Bianconi1-1/+2
In order to avoid memory leaks, clean the dma engine unloading the module Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()Ryder Lee1-2/+6
We should use ieee80211_free_txskb() to report skb status avoid wrong aql accounting after reset. Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: only free skbs after mt7615_dma_reset() when reset happensRyder Lee1-3/+3
In mt7615_mac_reset_work(), make sure freeing skbs after mt7615_dma_reset(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: only free skbs after mt7915_dma_reset() when reset happensRyder Lee1-3/+3
In mt7915_mac_reset_work(), make sure freeing skbs after mt7915_dma_reset(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: fix memleak when mt7915_unregister_device()Ryder Lee1-2/+1
mt7915_tx_token_put() should get call before mt76_free_pending_txwi(). Fixes: f285dfb98562 ("mt76: mt7915: reset token when mac_reset happens") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix memleak when mt7615_unregister_device()Ryder Lee1-2/+1
mt7615_tx_token_put() should get call before mt76_free_pending_txwi(). Fixes: a6275e934605 ("mt76: mt7615: reset token when mac_reset happens") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: fix rate setting of tx descriptor in testmodeShayne Chen1-6/+19
Fix ofdm rate index and ldpc setting in rate setting field of tx descriptor. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework mt7915_tm_set_tx_len()Shayne Chen1-17/+5
Rework mt7915_tm_set_tx_len() with mt76_testmode_alloc_skb() to support larger packet based on a longer tx_time. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: testmode: add support to send larger packetShayne Chen4-35/+131
Add support to send larger packet in testmode to meet requirements of some test cases. The limit of max packet size is determined based on tx rate mode setting. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller4-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19wireless: fix spelling of A-MSDU in HE capabilitiesJohannes Berg4-4/+4
In the HE capabilities, spell A-MSDU correctly, not "A-MDSU". Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.9e6ff1af1181.If6868bc6902ccd9a95c74c78f716c4b41473ef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align HE capabilities A-MPDU Length Exponent ExtensionJohannes Berg2-2/+2
The A-MPDU length exponent extension is defined differently in 802.11ax D6.1, align with that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.c2a257d3e2df.I3455245d388c52c61dace7e7958dbed7e807cfb6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align some HE capabilities with the specJohannes Berg3-8/+8
Some names were changed, align that with the spec as of 802.11ax-D6.1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.b1e5fbab0d8c.I3eb6076cb0714ec6aec6b8f9dee613ce4a05d825@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-17Merge tag 'mt76-for-kvalo-2021-04-12' of https://github.com/nbd168/wirelessKalle Valo66-1298/+2243
mt76 patches for 5.13 * code cleanup * mt7915/mt7615 decap offload support * driver fixes * mt7613 eeprom support * MCU code unification * threaded NAPI support * new device IDs * mt7921 device reset support * rx timestamp support # gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-04-14of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-8/+1
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Merge tag 'wireless-drivers-next-2021-04-13' of ↵David S. Miller2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.13 First set of patches for v5.13. I have been offline for a couple of and I have a smaller pull request this time. The next one will be bigger. Nothing really special standing out. ath11k * add initial support for QCN9074, but not enabled yet due to firmware problems * enable radar detection for 160MHz secondary segment * handle beacon misses in station mode rtw88 * 8822c: support firmware crash dump mt7601u * enable TDLS support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13mt76: mt7921: add rcu section in mt7921_mcu_tx_rate_reportLorenzo Bianconi1-1/+6
Introduce rcu section in mt7921_mcu_tx_rate_report before dereferencing wcid pointer otherwise loockdep will report the following issue: [ 115.245740] ============================= [ 115.245754] WARNING: suspicious RCU usage [ 115.245771] 5.10.20 #0 Not tainted [ 115.245784] ----------------------------- [ 115.245816] other info that might help us debug this: [ 115.245830] rcu_scheduler_active = 2, debug_locks = 1 [ 115.245845] 3 locks held by kworker/u4:1/20: [ 115.245858] #0: ffffff80065ab138 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x1f8/0x6b8 [ 115.245948] #1: ffffffc01198bdd8 ((work_completion)(&(&dev->mphy.mac_work)->work)){+.+.}-{0:0}, at: process_one_8 [ 115.246027] #2: ffffff8006543ce8 (&dev->mutex#2){+.+.}-{3:3}, at: mt7921_mac_work+0x60/0x2b0 [mt7921e] [ 115.246125] [ 115.246125] stack backtrace: [ 115.246142] CPU: 1 PID: 20 Comm: kworker/u4:1 Not tainted 5.10.20 #0 [ 115.246152] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 115.246168] Workqueue: phy0 mt7921_mac_work [mt7921e] [ 115.246188] Call trace: [ 115.246201] dump_backtrace+0x0/0x1a8 [ 115.246213] show_stack+0x14/0x30 [ 115.246228] dump_stack+0xec/0x134 [ 115.246240] lockdep_rcu_suspicious+0xcc/0xdc [ 115.246255] mt7921_get_wtbl_info+0x2a4/0x310 [mt7921e] [ 115.246269] mt7921_mac_work+0x284/0x2b0 [mt7921e] [ 115.246281] process_one_work+0x2a0/0x6b8 [ 115.246293] worker_thread+0x40/0x440 [ 115.246305] kthread+0x144/0x148 [ 115.246317] ret_from_fork+0x10/0x18 Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7921: introduce MCU_EVENT_LP_INFO event parsingLorenzo Bianconi5-1/+86
Report trace event related to MCU_EVENT_LP_INFO that is sent by the mcu when it is ready to enter in deep sleep state Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7615: always add rx header translation tlv when adding stationsFelix Fietkau3-8/+5
Ensures that header translation is disabled for interfaces that do not support it. Fixes: d4b98c63d7a7 ("mt76: mt7615: add support for rx decapsulation offload") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7615: add missing SPDX tag in mmio.cRyder Lee1-0/+3
Resolve the following checkpatch.pl script warning: WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7915: add mmio.cRyder Lee8-218/+177
Add mmio.c in order to use mt76_bus_ops throughout the driver. It will be also shared with the future APSoC revision. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: report Rx timestampRyder Lee15-63/+89
Frame reception timestamp (low 32-bits) that indicates the value of the local TSF timer value at the time the first bit of the MAC header in the received frame (PPDU unit) arriving at the MAC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7921: remove 80+80 MHz support capabilitiesFelix Fietkau2-7/+0
This mode is not supported by the hardware Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: fix potential DMA mapping leakFelix Fietkau1-1/+1
With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap could potentially inherit a non-zero value from stack garbage. If this happens, it will cause DMA mappings for MCU command frames to not be unmapped after completion Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7921: reduce the data latency during hw scanSean Wang2-1/+7
Reduce the data latency during hw_scan by the split scan which would switch back to operational channel right after scanning each channel done. Suggested-by: Asda Wen <Asda.Wen@mediatek.com> Suggested-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7921: fix the insmod hangsSean Wang4-16/+3
Fix the second insert module causing the device hangs after remove module. Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-13mt76: mt7921: fix kernel crash when the firmware fails to downloadSean Wang1-1/+3
Fix kernel crash when the firmware is missing or fails to download. [ 9.444758] kernel BUG at drivers/pci/msi.c:375! [ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO) [ 9.505814] pc : free_msi_irqs+0x180/0x184 [ 9.509897] lr : free_msi_irqs+0x40/0x184 [ 9.513893] sp : ffffffc015193870 [ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2 [ 9.522492] x27: 0000000000000acd x26: 000000000000009a [ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8 [ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200 [ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480 [ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000 [ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34 [ 9.554277] x15: 0000000000000000 x14: 0000000000080800 [ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000 [ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0 [ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780 [ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 [ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000 [ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000 [ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000 [ 9.596660] Call trace: [ 9.599095] free_msi_irqs+0x180/0x184 [ 9.602831] pci_disable_msi+0x100/0x130 [ 9.606740] pci_free_irq_vectors+0x24/0x30 [ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e] [ 9.615693] pci_device_probe+0xd4/0x14c [ 9.619604] really_probe+0x134/0x2ec [ 9.623252] driver_probe_device+0x64/0xfc [ 9.627335] device_driver_attach+0x4c/0x6c [ 9.631506] __driver_attach+0xac/0xc0 [ 9.635243] bus_for_each_dev+0x8c/0xd4 [ 9.639066] driver_attach+0x2c/0x38 [ 9.642628] bus_add_driver+0xfc/0x1d0 [ 9.646365] driver_register+0x64/0xf8 [ 9.650101] __pci_register_driver+0x6c/0x7c [ 9.654360] init_module+0x28/0xfdc [mt7921e] [ 9.658704] do_one_initcall+0x13c/0x2d0 [ 9.662615] do_init_module+0x58/0x1e8 [ 9.666351] load_module+0xd80/0xeb4 [ 9.669912] __arm64_sys_finit_module+0xa8/0xe0 [ 9.674430] el0_svc_common+0xa4/0x16c [ 9.678168] el0_svc_compat_handler+0x2c/0x40 [ 9.682511] el0_svc_compat+0x8/0x10 [ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000) [ 9.692155] ---[ end trace 7621f966afbf0a29 ]--- [ 9.697385] Kernel panic - not syncing: Fatal exception [ 9.702599] SMP: stopping secondary CPUs [ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000 [ 9.712456] PHYS_OFFSET: 0xfffffff440000000 [ 9.716625] CPU features: 0x080026,2a80aa18 [ 9.720795] Memory Limit: none Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Reported-by: Claire Chang <tientzu@google.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix the dwell time controlSean Wang1-1/+2
dwell time for the scan is not configurable according to the current firmware submitted into linux-firmware.git, so leave the dwell time 0 to indicate the dwell time always determined by the firmware. Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Suggested-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaitonSean Wang3-0/+50
Fix the Wake-on-WoWLAN failure should rely on ARP Information is being updated in time to the firmware. Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definitionLorenzo Bianconi3-2/+8
Introduce MT_WFDMA_DUMMY_CR definition and remove magic numbers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: add wifi subsystem resetRyder Lee3-16/+70
Reset wifi subsystem when MCU is already running. Fixes firmware download failure after soft reboot on systems where the PCIe reset could not be performed properly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix mt7915_mcu_add_beaconRyder Lee1-10/+12
ieee80211_beacon_get_template() returns NULL when beacon state is disabled. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: fix .add_beacon_offload()Ryder Lee1-2/+10
ieee80211_beacon_get_template() returns NULL when beacon state is disabled, so beacon_offload cannot be disabled for some devices. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: rework mt7921_mcu_debug_msg_event routineLorenzo Bianconi1-14/+12
Rework mt7921_mcu_debug_msg_event routing removing unnecessary assignments and relying on wiphy_info Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: always wake the device in mt7921_remove_interfaceLorenzo Bianconi1-1/+1
Make sure the mcu is not in sleep mode before sending mcu messages in mt7921_remove_interface routine. Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: fix key set/delete issueLorenzo Bianconi1-8/+17
Similar to the mt7915 driver, deleting a key with the previous key index deletes the current key. Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: fix txpower init for TSSI off chipsShayne Chen1-6/+13
Fix incorrect txpower init value for TSSI off chips which causes too small txpower. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: remove redundant dev_err call in mt7622_wmac_probe()Guobin Huang1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: limit firmware log message printk to buffer lengthFelix Fietkau1-1/+2
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: limit firmware log message printk to buffer lengthFelix Fietkau1-1/+2
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 14:53:22 +0300