summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21mt76: mt7615: wake device before configuring hw keysLorenzo Bianconi1-3/+9
Make sure the device is in full-power before uploading keys to the hw Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: wake device before accessing regmap in debugfsLorenzo Bianconi1-1/+24
Make sure the device is in full-power before reading regs in debugfs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: introduce mt7615_mutex_{acquire,release} utilitiesLorenzo Bianconi5-52/+72
Introduce mt7615_mutex_{acquire,release} utility routines in order to switch in full-power/low-power before/after accessing device register-map Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: add mt7615_pm_wake utility routineLorenzo Bianconi6-6/+75
Introduce mt7615_pm_wake utility routine to wake the device from runtime low-power state (lower-power state is currently supported by offload firmware for pcie devices). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: move mt76 workqueue in common codeLorenzo Bianconi8-34/+26
Move mt76 workqueue from usb to common code in order to be reused adding low-power support for mt7663 chipset Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: avoid polling in fw_own for mt7663Lorenzo Bianconi1-2/+2
According to the vendor sdk, mt7663 does not need to poll register after firmware own. Since just mt7622 polls status register, set proper timeout value according to the vendor sdk Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: avoid memcpy in rxv operationRyder Lee2-48/+37
Avoid memcpy in Rx hot path to slightly improve performance. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2u: enable HC-M7662BU1Lorenzo Bianconi1-0/+1
Enable support for HC-M7662BU1 module on mt76x2u driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2: fix pci suspend/resume on mt7612eLorenzo Bianconi3-0/+74
Fix the following mt7612e hw hangs during suspend/resume reported on Dell Vostro 3360 mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested ------------[ cut here ]----------- CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211] RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100 RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0 R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 wlp1s0: Failed check-sdata-in-driver check, flags: 0x0 CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G W 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211] RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000 R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_do_stop+0x5af/0x8c0 [mac80211] ieee80211_stop+0x16/0x20 [mac80211] __dev_close_many+0xaa/0x120 dev_close_many+0xa1/0x2b0 dev_close+0x6d/0x90 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211] ieee80211_reconfig+0xa2/0x1700 [mac80211] ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: update HE capabilitiesRyder Lee1-18/+26
Sync from SDK to update HE capabilities. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: implement testmode supportFelix Fietkau10-9/+523
Supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings, as well as displaying rx statistics. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: add API for testmode supportFelix Fietkau8-0/+765
This can be used for calibration in the manufacturing process. It supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings. It also supports receiving packets and showing some statistics, including packet counters and detailed RSSI information. It will only be compiled in if CONFIG_NL80211_TESTMODE is enabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: vif_mask to struct mt76_phyFelix Fietkau10-19/+16
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: use full on-chip memory address for WF_PHY registersFelix Fietkau3-5/+1
Now that the bus access functions can use mapping for accessing full register addresses, use it for WF_PHY registers to keep them constant. Needed for follow-up work on testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: add support for accessing RF registers via MCUFelix Fietkau4-3/+77
Includes debugfs files for testing it. Will be used for testmode support. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: add support for accessing mapped registers via bus opsFelix Fietkau2-0/+47
Makes it possible to read/write them via debugfs, similar to mt7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: schedule tx tasklet and sta poll on mac tx freeFelix Fietkau2-4/+6
Unlike on earlier chips, DMA completion on MT7615 does not imply actually having sent out any packets. Since AQL will prevent filling the hardware queues and will only allow more packets to be passed to the driver after tx completion, it makes much more sense to schedule the tx tasklet there. This is also needed for scheduling tx in testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt76x2e: rename routines in pci.cLorenzo Bianconi1-7/+7
Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of mt76 code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: overwrite qid for non-bufferable mgmt framesRyder Lee3-18/+20
Overwrite hw queue id for non-bufferable management frames if the hw/fw support always txq (altxq) in order to be in sync with mac txwi code Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: use ieee80211_tx_queue_params to avoid open codedRyder Lee3-19/+10
This is easy to add MU EDCA parameters in the future. This patch also fixes a wrong cw_min assignment. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: add MU-MIMO supportRyder Lee4-10/+87
Enable MU-MIMO DL/UL and add relative counters in debugfs. Currently MU modules read WTBL first to notify BA changes to other cross modules, so adjust mt7915_mcu_sta_ba() accordingly. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: add a fixed AC queue mappingRyder Lee4-11/+29
In MT7915, hardware queue map is flexible. However, certain firmware modules like MU and U-APSD presume a fixed queue order to adapt some devices that have DMA scheduler with a strict order, so this patch can help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: add .set_tsf callbackRyder Lee2-0/+22
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: add U-APSD support on AP sideLorenzo Bianconi3-3/+68
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: rely on register macrosLorenzo Bianconi2-4/+4
For consistency with the rest of the code always rely on defined macros for register access Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: fix include in pci.hMarkus Theil1-0/+1
kernel test robot <lkp@intel.com> found the following issue and Kalle Valo forwarded it to Linux wireless. drivers/net/wireless/mediatek/mt76/pci.c:8:6: warning: no previous prototype for 'mt76_pci_disable_aspm' Fix this by adding the missing include of mt76.h as Kalle suggested. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: allow more channels, allowed in ETSI domainMarkus Theil1-0/+3
While looking at the ETSI regulatory domain definitions and a patch, which allows more channels for ath10k, I also checked the channels allowed for mt76. ETSI regulations would possibly allow to add channels 32, 68, 96, 144, 169 and 173. IEEE 802.11-2016 defines no operating class for channels 32, 68 and 96. This leaves us channels 144, 169 and 173, which are included in this patch. I tested 169 and 173 with a mt76 based USB dongle (AVM AC 860) and they worked fine. If I saw that right, these channels are also covered by register definitions inside the driver. Channel 144 should also work, but gets disabled by the kernel as of now. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix up typo in Kconfig for MT7663USean Wang1-1/+1
Fix up typo in Kconfig with indicating MT7663U is an 802.11ac device Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7663: introduce ARP filter offloadSean Wang4-3/+91
Introduce ARP filter offload Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: usb: rely on mt76_for_each_q_rxLorenzo Bianconi2-32/+12
Rely on mt76_for_each_q_rx whenever possible in order to simply the code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: re-enable offloading of sequence number assignmentFelix Fietkau3-9/+41
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: overwrite qid for non-bufferable mgmt framesLorenzo Bianconi6-15/+18
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix hw queue mappingLorenzo Bianconi6-28/+45
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7615: fix lmac queue debugsfs entryLorenzo Bianconi1-4/+5
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: add missing lock configuring coverage classLorenzo Bianconi3-0/+8
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-23mt76: mt7615: fix EEPROM buffer sizeFelix Fietkau2-3/+2
Avoid adding MT7615_EEPROM_SIZE twice. Rename MT7615_EEPROM_EXTRA_DATA to MT7615_EEPROM_FULL_SIZE, since it already includes MT7615_EEPROM_SIZE Fixes: ad380ad1ebbe ("mt76: mt7615: add support for applying DC offset calibration from EEPROM") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622150716.49622-1-nbd@nbd.name
2020-06-23mt76: mt7663u: fix memory leaks in mt7663u_probeLorenzo Bianconi2-10/+23
Fix the two following memory leaks in mt7663u_probe: 1- if device power-own times out, remove ieee80211 hw device. 2- if mt76u queues allocation fails, remove pending urbs. Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e4098f0c8a9ac51997de07f38c2bcdf7042d6db1.1592755166.git.lorenzo@kernel.org
2020-06-23mt76: mt76x02: do not access uninitialized NAPI structsFelix Fietkau1-2/+3
Fixes a crash on MMIO devices when running into the watchdog reset Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200615181341.81871-1-nbd@nbd.name
2020-06-07mt76: overwrite qid for non-bufferable mgmt framesLorenzo Bianconi6-15/+18
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-07mt76: mt7615: fix hw queue mappingLorenzo Bianconi6-28/+45
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-07mt76: mt7615: fix lmac queue debugsfs entryLorenzo Bianconi1-4/+5
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-07mt76: add missing lock configuring coverage classLorenzo Bianconi3-0/+8
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: remove set but not used variable 'msta'YueHaibing1-3/+0
Cc: linux-wireless@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, netdev@vger.kernel.org, kernel-janitors@vger.kernel.org Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_sta_txbf_type': drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1805:21: warning: variable 'msta' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: Use kmemdup in mt7615_queue_key_update()YueHaibing1-2/+1
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: only iterate over initialized rx queuesFelix Fietkau8-10/+20
Fixes the following reported crash: [ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456 [ 2.361583] lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5 [ 2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019 [ 2.363343] Call Trace: [ 2.363552] dump_stack+0x97/0xdb [ 2.363826] ? spin_bug+0xa6/0xb3 [ 2.364096] do_raw_spin_lock+0x6a/0x9a [ 2.364417] mt76_dma_rx_fill+0x44/0x1de [mt76] [ 2.364787] ? mt76_dma_kick_queue+0x18/0x18 [mt76] [ 2.365184] mt76_dma_init+0x53/0x85 [mt76] [ 2.365532] mt7615_dma_init+0x3d7/0x546 [mt7615e] [ 2.365928] mt7615_register_device+0xe6/0x1a0 [mt7615e] [ 2.366364] mt7615_mmio_probe+0x14b/0x171 [mt7615e] [ 2.366771] mt7615_pci_probe+0x118/0x13b [mt7615e] [ 2.367169] pci_device_probe+0xaf/0x13d [ 2.367491] driver_probe_device+0x284/0x2ca [ 2.367840] __driver_attach+0x7a/0x9e [ 2.368146] ? driver_attach+0x1f/0x1f [ 2.368451] bus_for_each_dev+0xa0/0xdb [ 2.368765] bus_add_driver+0x132/0x204 [ 2.369078] driver_register+0x8e/0xcd [ 2.369384] do_one_initcall+0x160/0x257 [ 2.369706] ? 0xffffffffc0240000 [ 2.369980] do_init_module+0x60/0x1bb [ 2.370286] load_module+0x18c2/0x1a2b [ 2.370596] ? kernel_read_file+0x141/0x1b9 [ 2.370937] ? kernel_read_file_from_fd+0x46/0x71 [ 2.371320] SyS_finit_module+0xcc/0xf0 [ 2.371636] do_syscall_64+0x6b/0xf7 [ 2.371930] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 2.372344] RIP: 0033:0x7da218ae4199 [ 2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199 [ 2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006 [ 2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540 [ 2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000 Reported-by: Sean Wang <sean.wang@mediatek.com> Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: add support for MT7611NDENG Qingfang3-1/+14
MT7611N is basically the same as MT7615N, except it only supports 5GHz It is used by some TP-Link and Mercury wireless routers Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix wcid allocation issuesFelix Fietkau3-15/+15
mt76 core uses ffs() to find the next free bit. This works well for 32 bit architectures where BITS_PER_LONG is 32. ffs only checks 32 bit values, so allocation fails on 64 bit architectures. Additionally, the wcid mask array was too small in cases where the array was not a multiple of BITS_PER_LONG. Fix this by making the wcid mask array u32 instead and use DIV_ROUND_UP for the size, just in case we ever bump it to a value that's not a multiple of 32. Reported-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phyLorenzo Bianconi1-1/+2
Fix a NULL pointer dereference in mt7915_register_ext_phy since phy data structure is allocated by mt76_alloc_phy routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: fix hw_scan with ssid_type for specified SSID onlySean Wang2-2/+5
Fix hw_scan with ssid_type for specified SSID only The definition for ssid_type in current firmware is that ssid_type BIT(2) set actually for specified SSID + wildcard SSID. ssid_type BIT(2) and ssid_type_ext BIT(0) both set actually for specified SSID only; Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix a handful of spelling mistakesColin Ian King1-3/+3
There are some spelling mistakes in some literal strings. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 18:04:46 +0300