summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-30wifi: mt76: mt7996: Add mcu commands for getting sta tx statisticYi-Chia Hsieh1-0/+5
Per peer Tx/Rx statistic can only be obtained by querying WM when WED is on. This patch switches to periodic event reporting in the case of WED being enabled. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: get tx_retries and tx_failed from txfreeYi-Chia Hsieh1-4/+15
Retrieve tx retries/failed counts from 'txfree done' events and report them via mt7996_sta_statistics(). Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix rx rate report for CBW320-2Peter Chiu1-0/+2
RX vector reports channel bandwidth 320-1 and 320-2 with different values. Fix it to correctly report rx rate when using CBW320-2. Fixes: 80f5a31d2856 ("wifi: mt76: mt7996: add support for EHT rate report") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: set correct wcid in txpPeter Chiu1-5/+3
Set correct wcid in txp to let the SDO hw module look into the correct wtbl, otherwise the tx descriptor may be wrongly fiiled. This patch also fixed the issue that driver could not correctly report sta statistics, especially in WDS mode, which misled AQL. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: remove unused error path in mt76_connac_tx_complete_skbFelix Fietkau1-1/+1
The error handling code was added in order to allow tx enqueue to fail after calling .tx_prepare_skb. Since this can no longer happen, the error handling code is unused. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: connac: add connac3 mac libraryLorenzo Bianconi1-179/+1
Introduce connac3_mac in mt76_connac library to reuse mac code shared between WiFi7 chipsets. So far connac3 library contains just radiotap parsing code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: move rate info in mt76_vifLorenzo Bianconi1-5/+5
This is a preliminary patch to introduce mt76_connac3 mac library used by WiFi7 chipsets (e.g. mt7996). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: move ampdu_state in mt76_wcidLorenzo Bianconi1-1/+1
ampdu_state field is used by most of the drivers, so move it in mt76_wcid structure. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: rely on shared poll_list fieldLorenzo Bianconi1-8/+8
Rely on poll_list field in mt76_wcid structure and get rid of private copy. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lockLorenzo Bianconi1-19/+21
Rely on sta_poll_list and sta_poll_lock fields in mt76_dev structure and get rid of private copies. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: connac: add support to set ifs time by mcu commandPeter Chiu1-25/+2
There's a race between driver and fw on some tx/rx control registers when setting ifs, which will cause accidental hw queue pause problems. Avoid this by setting ifs time with bss_info mcu command. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25mt76: mt7996: rely on mt76_sta_stats in mt76_wcidLorenzo Bianconi1-3/+4
mt76 now accounts station stats in mt76_sta_stats available in mt76_wcid struct. Get rid of mt7996 private copy. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recoveryBo Jiao1-3/+6
Stop WFDMA transaction to avoid potential unexpected issue while doing system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: rely on mib_stats shared definitionLorenzo Bianconi1-1/+1
Get rid of private copy of mib_stats structure. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: fix header translation logicRyder Lee1-4/+9
When header translation failure is indicated, the hardware will insert an extra 2-byte field containing the data length after the protocol type field. This happens either when the LLC-SNAP pattern did not match, or if a VLAN header was detected. The previous commit accidentally breaks the logic, so reverts back. Fixes: 27db47ab1f47 (wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-06-01wifi: mt76: mt7996: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-7/+12
mt7996_mac_write_txwi() Fix possible NULL pointer dereference on mvif pointer in mt7996_mac_write_txwi routine. Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2637628a84f42ad6d7b774e706f041d5b45c8cb5.1685269638.git.lorenzo@kernel.org
2023-05-12wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATERyder Lee1-1/+1
To avoid sparse warning: sparse: warning: invalid assignment: |= sparse: left side has type restricted __le32 sparse: right side has type unsigned lon Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee1-9/+4
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee1-8/+16
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee1-0/+2
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee1-0/+6
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee1-17/+15
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable coredump supportRyder Lee1-1/+71
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao1-46/+238
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: get rid of unused sta_ps callbacksLorenzo Bianconi1-4/+0
sta_ps callback is just an empty stub for most of the drivers, so get rid of them. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move irq_tasklet in mt76_dev structLorenzo Bianconi1-1/+1
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921, mt7615, mt7663 and mt7996) so move it in common code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen1-5/+6
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add eht rx rate supportShayne Chen1-4/+5
Add support to report eht rx rate. Note that extended fields for eht in mt76_rx_status will make the struct size exceed the cb size, so make nss and band share the same u8. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix radiotap bitfieldRyder Lee1-26/+28
The 11be generation's radiotap bitfields were wrongly copy-and-pasted from 11ax driver, so fix them accordingly. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add support for EHT rate reportShayne Chen1-1/+33
Currenly only EHT TX rate report is supported. EHT RX rate is temporally reported with HE rate. Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add helpers for wtbl and interface limitShayne Chen1-1/+1
Add helpers to get the maximum wtbl size and interface num based on hw caps. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skbLorenzo Bianconi1-21/+0
Drop mt7996_tx_complete_skb routine since it is equivalent to mt76_connac_tx_complete_skb(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmapLorenzo Bianconi1-13/+1
Drop mt7996_txp_skb_unmap routine since it is equivalent to mt76_connac_txp_skb_unmap(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_common structureLorenzo Bianconi1-19/+19
mt7996_txp structure is equal to mt76_connac_fw_txp one. Drop mt7996_txp and rely on mt76_connac_txp_common. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_valLorenzo Bianconi1-46/+2
In order to fix a possible NULL pointer dereference in mt7996_mac_write_txwi() of vif pointer, export mt76_connac2_mac_tx_rate_val utility routine and reuse it in mt7996 driver. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_transLorenzo Bianconi1-1/+1
The switch default case for frame_contorl is invalid. Return -EINVAL error for it. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: update register for CFEND_RATEShayne Chen1-1/+1
In newer chipsets, CFEND_RATE setting has been moved to different hw module. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: enable ack signal supportRyder Lee1-1/+18
This reports signal strength of ACK packets from the peer as measured at each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: enable use_cts_prot supportRyder Lee1-0/+13
This adds selectable RTC/CTS enablement for each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devicesShayne Chen1-0/+2468
The driver first supports Filogic 680 PCI device, which is a Wi-Fi 7 chipset supporting concurrent tri-band operation at 6 GHz, 5 GHz, and 2.4 GHz with 4x4 antennas on each band. Currently, mt7996 only supports tri-band HE or older mode. EHT mode and more variants of Filogic 680 support will be introduced in further patches. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:48:17 +0300