summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2015-01-05iwlwifi: mvm: scan dwell time correctionsDavid Spinadel2-5/+16
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: add a flag to enable match found notificationDavid Spinadel2-0/+4
Add a flag that enables match found notification to align with FW API change. Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix out of bounds access to tid_to_mac80211_acEyal Shapira1-2/+6
When tid_tspec was set to IWL_TID_NON_QOS (8) this led to an out of bounds access to the tid_to_mac80211_ac array whose size is 7. Fix this. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix Rx with both chainsEyal Shapira1-1/+1
commit 5c90422439d6 "iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it" broke Rx with 2 chains for diversity. This had an impact on throughput where we're using only a single stream (11a/b/g APs, single stream APs, static SMPS). Fixes: 5c90422439d6 ("iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it") Cc: Stable <stable@vger.kernel.org> [3.16+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: 7000: fix reported firmware name for 7265DEmmanuel Grumbach1-1/+1
We were advertising iwlwifi-7265-X.ucode instead of iwlwifi-7265D-X.ucode. Fix this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: pcie: correctly define 7265-D cfgArik Nemtsov1-1/+3
The trans cfg was not replaced for 7265-D cards. This led to a check of the min-NVM version against a 7265-C card, causing very-old 7265-D cards to operate incorrectly with the driver. Fixes: 3fd0d3c170ad ("iwlwifi: pcie: support 7265-D devices") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: rs: organize and cleanup constsEyal Shapira3-97/+79
Organize and cleanup the consts used by rs. This is part of making some of these configurable. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Alter passive scan fragmentation parameters in case of multi-MACHaim Dreyfuss1-6/+10
Make passive scan fragmentation depends on the number of active interfaces. In case of single-MAC, make passive scan less fragmented. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: call to pcie_apply_destination also on family 8000 B stepEran Harary1-0/+3
In order to config the FW and to allocate monitor buffer driver should run the function iwl_pcie_apply_destination immediately after FW sections are loaded. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Configure EBS scan ratioHaim Dreyfuss2-2/+11
This configuration defines the ratio between number of scan iterations where EBS is involved to those where it is not. This configuration was left unconfigured due to inaccurate documentation. Fix documentation as well. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: ask the fw to wakeup (from d0i3) on sysassertEliad Peller1-0/+1
Set the wakeup flag (of the d3 command) to configure the fw to wakeup when sysassert happens while in d0i3. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: tlv: add support for IWL_UCODE_TLV_SDIO_ADMA_ADDR TLVLiad Kaufman5-0/+17
A new TLV supplies the ADMA address for SDIO mode, allowing the driver to configure the default base address to be this (as given in the FW), rather than hardcoding the values to use until the FW sends the ALIVE message. Use the value given by the FW in the IWL_UCODE_TLV_SDIO_ADMA_ADDR TLV for setting the default SDTM base address until the FW sends the ALIVE message. If it isn't given in the FW - use the current hardcoded values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_sta_from_mac80211() consistentlyJohannes Berg6-20/+17
A number of places (still) use a direct operation, use iwl_mvm_sta_from_mac80211() consistently. In one place also move it into the variable initializer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_vif_from_mac80211() consistentlyJohannes Berg3-6/+6
There are a few places not using it, use it at those places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: remove useless extern definition of iwl4265_2ac_sdio_cfgEmmanuel Grumbach1-1/+0
This device was renamed, but the external definition remained there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: clean refs before stop_device()Eliad Peller1-4/+5
Some implementations (i.e. mini_rpm) assume the references are managed only while the device is started. Move the stale reference cleanup before stopping the device in order to make them happy. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: dvm: main: Use setup_timerJulia Lawall1-6/+4
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: dvm: tt: Use setup_timerJulia Lawall1-9/+4
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support 2 different channelsEmmanuel Grumbach1-1/+1
The driver and the firmware now support 2 different channels at the same time. Advertise this capability to the stack. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: wait for d0i3 exit on hw restartEliad Peller1-0/+13
On hw restart, make sure to wait for d0i3 exit (by checking the IN_D0I3 status bit). This is needed in order to avoid the stale d0i3_exit_work from doing harm (e.g. unref cleared reference). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: consider d0i3_disable in iwl_mvm_is_d0i3_supported()Eliad Peller1-0/+1
Consider the iwlwifi module param d0i3_disable when considering whether d0i3 is supported. (There is currently no need to differentiate between supported and enabled, so keep the function as-is) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support IWL_D0I3_MODE_ON_SUSPEND d0i3 modeEliad Peller5-2/+53
Enter d0i3 on suspend, and exit d0i3. Wait for the command responses in both cases. Use this mode in case of pcie trans. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: support multiple d0i3 modesEliad Peller2-0/+18
Allow configuring additional d0i3 mode, in which the fw will be configured to enter d0i3 only on suspend (while keeping the wake_lock accounting as usual) The d0i3 mode to use will be determined by the underlying trans layer. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: allow both d0i3 and d3 wowlan configuration modesEliad Peller2-8/+13
d3 and d0i3 shouldn't be mutually exclusive. Set supported wowlan triggers by looking for each of them, and check on suspend/resume which flow should be used ("any" trigger is supported by d0i3, and all the others by d3) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: pcie: add basic reference accountingEliad Peller5-5/+83
Implement the ref/unref trans ops and track both tx and host command queues (and hold references while they are not empty). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: convert the SRAM dump to the generic memory dumpEmmanuel Grumbach2-10/+10
This allows to add the offset. The type of the generic memory dump will let the parser know that this is SRAM. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: change SMEM dump to general purpose memory dumpEmmanuel Grumbach2-6/+29
Instead of adding a dump type for each type of memory, change the SMEM type to be a general purpose memory dump. Add the type of the memory and its offset in the device in the dump itself. This will allow an external parser to know where this memory came from. Note that since this type isn't really in use yet, this is not a real problem. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add smem content to dump dataLiad Kaufman4-2/+31
In NICs that have SMEM - add its content to the dump data for later debug. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support additional nvm_file in family 8000 B stepEran Harary4-4/+14
nvm_file in family 8000 B step and A step differ. This means that the driver should support 2 file name as default. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: rs: fix max rate allowed if no rate is allowedEyal Shapira1-7/+18
In case the rate mask for one of the modulations was zero the max rate idx for that modulation was set to 32 (BITS_PER_LONG). This is bad as it would later lead to an out of bounds access to the expected tpt table. In most cases there was no real effect as the expected tpt was set to 0 and this led to avoiding the modulation effectively. Fix the out of bounds access and explicitly skip the modulation in case there's no rate allowed in it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: clear tt values when entering CT-killLuciano Coelho1-1/+6
Clear the thermal throttling values when entering CT-kill, since everything will be reinitialized anyway when we exit CT-kill. Additionally, clear the dynamic_smps value in the initialization funciton, for consistency. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Set the HW step in the core dumpIdo Yariv1-0/+1
The HW step member was left out of the core dump information. Fix this. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: allow RSSI compensationEmmanuel Grumbach1-0/+2
The firmware is able to compensate the rssi when we hear the frame on a different channel. This is true for an offset up to 3 channels. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add debugfs to trigger fw debug logs collectionEmmanuel Grumbach4-2/+82
This allows to collect the logs even if the firmware hasn't crashed. Of course, crashing the firmware is an option, but this is easier and nicer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: pcie: let the Manageability Engine know when we leaveEmmanuel Grumbach3-3/+20
When the driver is unload, the Manageability Engine should know about that - send an event to inform it about this event. Reviewed-by: Reuven Borok <reuven.borok@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support LnP 1x1 antenna configurationMoshe Harel11-31/+65
The antenna configuration has to be read also from OTP Currently read only from FW image Guideline: An antenna exists only if appears both in FW image & NVM Signed-off-by: Moshe Harel <moshe.harel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28Revert "iwlwifi: use correct fw file in 8000 b-step"Dor Shaish1-55/+0
Signed-off-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add fw runtime stack to dump dataLiad Kaufman4-6/+44
The allocation of the DCCM between the data and the stack can theoretically change without notice to the driver, but the total size is HW-fixed. Since the stack CCM (runtime stack) has also data important to the FW - this patch allows pulling the whole DCCM in one piece and adds it to the dump data. If the size isn't known - just use the data part of the DCCM as it appears in the FW TLVs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: remove MODULE_VERSIONJohannes Berg4-36/+1
The module version "in-tree:" or "in-tree:d" is useless; there should be better (functional) ways to detect whether debugging is enabled and other than that the version says nothing. Therefore remove the driver version completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-15mac80211: move U-APSD enablement to vif flagsJohannes Berg1-7/+6
In order to let drivers have more dynamic U-APSD support, move the enablement flag to the virtual interface driver flags. This lets drivers not only set it up differently for different interfaces, but also enable/disable on the fly if needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-14iwlwifi: pcie: limit fw chunk sizes given to fhLiad Kaufman2-1/+2
New FW has chunks that are larger than the size limit of the FH's DMA. To make sure we don't crash it - actively limit the max size of each chunk. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: add new device IDs for 3165Emmanuel Grumbach1-0/+4
A few device IDs were added, reflect this change in the driver. Cc; <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: don't double free a pointer if no FW was foundEmmanuel Grumbach1-1/+1
In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: pcie: re-ACK all interrupts after device resetEmmanuel Grumbach1-5/+10
When we reset the device, the CSR_INT gets cleared as well as CSR_INT_MASK. Meaning that we shouldn't get any interrupt but, due to a hardware bug, recent devices will keep sending interrupts. This leads to an interrupt storm while stopping the device. The way to fix this is to ACK all the interrupts after the device is reset so that the value of CSR_INT will stay 0xffffffff. Fixes: 522713c81e4e ("iwlwifi: pcie: properly reset the device") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: mvm: clear IN_HW_RESTART flag on stop()Eliad Peller1-2/+13
On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: Ability to work with packed usniffer imageEran Harary4-1/+37
The new ucode package format holds also the usniffer images (in addition to the operational images and the TLVs). The driver can load the usniffer image if debug configuration tells it to. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: support more monitor types dumpingLiad Kaufman1-23/+79
Until this patch, dumping the monitor data could be done only for PCIe external (DRAM) mode in 7000 HW family. This patch allows to pull the monitor data also on other families, and also to pull the monitor data if an internal buffer is used. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: config regs according to fw tlvLiad Kaufman3-0/+71
Sometimes there is a need to configure some registers for setting some FW properties, such as the FW monitor mode (internal/external). This patch supports setting this for PCIe mode. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: send dbg config hcmds to fw if set in tlvLiad Kaufman2-0/+40
Send all debug-configuration HCMDs that are set in the TLVs to the FW. This may include HCMDs to configure the FW monitor and FW log level, for example. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: define the .ucode file format for debugLiad Kaufman3-15/+285
Debug information can be appended to the firmware file. This information will be used by the driver to enable / disable debugging features in the firmware. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 06:35:49 +0300