summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2013-12-10iwlwifi: mvm: allow keeping connections in d3_testEliad Peller2-1/+11
Keeping connection can be useful also when testing d3 using the debugfs file (d3_test). Save the vif to keep connection on, and consider it when iterating over the interfaces. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: implement rate_update hook in rsEyal Shapira3-6/+29
Re-initialize rs when we get a rate_update hook called which happens when remote STA changes bandwidth or sends a VHT opmode notification. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: disconnect on disconnection wakeup eventEliad Peller1-0/+6
When waking up from d3 due to disconnection event (e.g. because of beacon loss), we should disconnect immediately. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: enable d3_test even if d3_test_pme_ptr is not availableEliad Peller1-8/+8
Even if d3_test_pme_ptr is not available, d3_test can still be useful, e.g. by manually triggering resume (with ctrl-c), and reading the wakeup reasons. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: refactor iwl_mvm_rs_rate_initEyal Shapira1-21/+28
Refactor setting of VHT enabled rates in preparation of adding some more logic there. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: simplify iwl_mvm_send_lq_cmdEyal Shapira4-15/+10
Remove the flags parameter which should be set to sync or async according to whether this is called during sta init or not. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: fix and improve printing of rate scale tableEyal Shapira1-18/+73
Info about VHT/HT rates wasn't printed properly when dumping the rate scale table. Fix that and print more info. While at it fix some other minor issues in the printing and prevent overflowing the print buffer. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: pcie: remove useless condition testJohannes Berg1-19/+13
After wait_event_timeout(), the condition must still be true if it returns >0, in fact almost the last thing in it is checking the condition again. It's therefore not useful to check yet again in our code, clean it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: Add debugfs entry to generate NMI to NICAlexander Bondar2-0/+17
Writting to fw_nmi entry will set DEVICE_SET_NMI_REG (0x00a01c30) generating NMI that halts NIC CPU. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: remove TX_CMD id from transport layerEmmanuel Grumbach3-1/+2
The transport layer doesn't need to know the TX_CMD id. It can be set by the op_mode. The transport layer still needs to know the layout of the Tx command because of alignment issues and because of the scratch pointer. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-06Merge branch 'master' of ↵John W. Linville12-18/+88
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-02Merge branch 'for-john' of ↵John W. Linville7-17/+17
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-11-26iwlwifi: mvm: use a cast to calculate the last seqno from the next oneLuciano Coelho1-1/+1
If the next seqno returned by the firmware is 0, we return an error (-16) in the iwl_mvm_get_last_nonqos_seq() function. This is because we return an integer and don't use any casting when calculating the last seqno from the one we received. Fix this by using a cast to u16 when doing the calculation, so we return 0xfff0, as we should. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: mvm: set seqno also when no keys are setLuciano Coelho1-1/+2
In an open BSS, after suspend/resume, we don't set the last seqno because the iwl_mvm_setup_connection_keep() returns too early. This happens because the check to see if we have any keys was returning immediately, without setting seqno and seqno_valid. Fix this. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: pcie: stop sending commands to dead firmwareAlexander Bondar3-4/+13
If we call ieee80211_hw_restart, it means that the firmware is in bad condition and will be reset soon. Since the firmware will be reset, there is no good reason to keep sending host commands. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: bump required firmware API version for 3160/7260Emmanuel Grumbach1-2/+2
A new firmware is coming out soon with new APIs. To make sure that this new firmware won't be loaded on old driver that don't support it, it's API version has been updated to 8. In order to be able to load it, bump the API version to 8. API version 7 is still supported and will be for another year or so. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: mvm: don't WARN about unsuccessful time eventEmmanuel Grumbach1-2/+5
Time event notification can have a failure status even if the time event was scheduled: * in START notification, this can happen if the time event was scheduled later than the requested apply time. * in STOP notification, this can happen if the time event is truncated. Even if both happened, the offchannel packets sent during the remain on channel are very likely to have been sent. Hence, don't WARN when this happens, but rather print a discrete line in the kernel log. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com>
2013-11-26iwlwifi: mvm: BT Coex fix another NULL pointer dereferenceEmmanuel Grumbach1-0/+5
This patch is very similar to a previous fix: 22cba0c0852f When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: mvm: BT Coex - don't enable MULTI_PRIO_LUTEmmanuel Grumbach1-1/+0
This feature isn't supported by the firmware (yet). Note that settingt he values to BT_CFG_CMD is harmless if the validity bit is clear - so keep the configuration values in BT_CFG_CMD, but clear the validity bit until thes feature is enabled in the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: add new HW - 7265 seriesOren Givon3-0/+41
Add new HW IDs and configurations for 7265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160Emmanuel Grumbach5-7/+15
We changed the timeout for the interrupt coealescing for calibration, but that wasn't effective since we changed that value back before loading the firmware. Since calibrations are notification from firmware and not Rx packets, this doesn't change anyway - the firmware will fire an interrupt straight away regardless of the interrupt coalescing value. Also, a HW issue has been discovered in 7000 devices series. The work around is to disable the new interrupt coalescing timeout feature - do this by setting bit 31 in CSR_INT_COALESCING. This has been fixed in 7265 which means that we can't rely on the device family and must have a hint in the iwl_cfg structure. Cc: stable@vger.kernel.org [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-26iwlwifi: mvm: check sta_id/drain values in debugfsJohannes Berg1-0/+4
The station ID must be valid, if it's out of range then the array access may crash. Validate the station ID to the array length, and also validate the drain value even if that doesn't matter all that much. Cc: stable@vger.kernel.org Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez2-6/+6
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez5-11/+11
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-08Merge branch 'master' of ↵John W. Linville13-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-11-06Merge branch 'for-john' of ↵John W. Linville13-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-11-04Merge branch 'master' of ↵John W. Linville43-1031/+3527
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-11-04Merge branch 'master' of ↵John W. Linville8-33/+112
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-30iwlwifi: mvm: BT Coex - fix copy paste issueEmmanuel Grumbach1-1/+1
Putting the context id of the primary phy context in the placeholder of the secondary is obviously a bad idea. Spotted by smatch. Fixes: dac94da8dba3 ("iwlwifi: mvm: new BT Coex API") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: remove duplicate includesMichael Opdenacker2-2/+0
Reported by "make includecheck" Tested that the corresponding sources still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: warn if firmware image doesn't existJohannes Berg2-10/+7
If the firmware image that we attempt to load doesn't actually exist we have a broken firmware file or other code not checking things correctly, so warn in such a case. Also avoid assigning cur_ucode/ucode_loaded then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: add missing break in debugfsJohannes Berg1-0/+1
When writing the disable_power_off value, the LPRX enable value also gets written unintentionally, so fix that by adding the missing break statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: capture the FCS in monitor modeJohannes Berg2-2/+12
This can be useful when using the device as a sniffer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: pcie: move warning message into warningJohannes Berg1-5/+4
Having a WARN_ON() followed by a printed message is less useful than having the message in the warning so move the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: BT Coex fix NULL pointer dereferenceEmmanuel Grumbach1-1/+5
When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. This avoids: [ 4481.476246] BUG: unable to handle kernel NULL pointer dereference at 00000045 [ 4481.479521] IP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.482023] *pde = 00000000 [ 4481.484332] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4481.486897] Modules linked in: netconsole configfs autofs4 rfcomm(O) bnep(O) nfsd nfs_acl auth_rpcgss exportfs nfs lockd binfmt_misc sunrpc fscache arc4 iwlmvm(O) mac80211(O) btusb(O) iwlwifi(O) bluetooth(O) cfg80211(O) snd_hda_codec_hdmi coretemp dell_wmi snd_hda_codec_idt compat(O) dell_laptop aesni_intel i915 sparse_keymap dcdbas cryptd psmouse serio_raw aes_i586 microcode snd_hda_intel drm_kms_helper snd_hda_codec drm snd_pcm snd_timer i2c_algo_bit video intel_agp intel_gtt snd soundcore snd_page_alloc crc32c_intel ahci sdhci_pci libahci sdhci mmc_core e1000e xhci_hcd [last unloaded: configfs] [ 4481.502983] [ 4481.505599] Pid: 6507, comm: kworker/0:1 Tainted: G O 3.4.43-dev #1 Dell Inc. Latitude E6430/0CMDYV [ 4481.508575] EIP: 0060:[<f8416a6a>] EFLAGS: 00010246 CPU: 0 [ 4481.511248] EIP is at iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.513947] EAX: ffffffea EBX: 00000002 ECX: 00000001 EDX: 00000001 [ 4481.516710] ESI: ec6f0f28 EDI: 00000000 EBP: e8175dfc ESP: e8175d9c [ 4481.519445] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 4481.522185] CR0: 8005003b CR2: 00000045 CR3: 01a5e000 CR4: 001407d0 [ 4481.524950] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4481.527768] DR6: ffff0ff0 DR7: 00000400 [ 4481.530565] Process kworker/0:1 (pid: 6507, ti=e8174000 task=e8032b20 task.ti=e8174000) [ 4481.533447] Stack: [ 4481.536379] e472439f 00003a12 e8032b20 e8033048 00000001 e8175ddc 00000246 e8033040 [ 4481.540132] 00000002 01814990 ec4d1ddc e8175dcc 00000000 00000000 00000000 00000000 [ 4481.543867] 00000000 00000000 00000001 000001c8 009b0002 ec4d1ddc ec6f0f28 00000000 [ 4481.547633] Call Trace: [ 4481.550578] [<f8418027>] iwl_mvm_bt_rssi_event+0x197/0x220 [iwlmvm] [ 4481.553537] [<f840919c>] iwl_mvm_stat_iterator+0xdc/0x240 [iwlmvm] [ 4481.556582] [<f8d129c2>] __iterate_active_interfaces+0xe2/0x1f0 [mac80211] [ 4481.559544] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.562519] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.565498] [<f8d12b0c>] ieee80211_iterate_active_interfaces+0x3c/0x50 [mac80211] [ 4481.568421] [<f8409b43>] iwl_mvm_rx_statistics+0xb3/0x130 [iwlmvm] [ 4481.571349] [<f8405431>] iwl_mvm_async_handlers_wk+0xc1/0xf0 [iwlmvm] [ 4481.574251] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.577162] [<c1052991>] process_one_work+0x181/0x5c0 [ 4481.580025] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.582861] [<f8405370>] ? iwl_mvm_rx_fw_logs+0x20/0x20 [iwlmvm] [ 4481.585722] [<c10530f1>] worker_thread+0x121/0x2c0 [ 4481.588536] [<c1052fd0>] ? rescuer_thread+0x1d0/0x1d0 [ 4481.591323] [<c105af0d>] kthread+0x7d/0x90 [ 4481.594059] [<c105ae90>] ? flush_kthread_worker+0x120/0x120 [ 4481.596868] [<c15b7cc2>] kernel_thread_helper+0x6/0x10 [ 4481.599605] Code: 9d de c3 c8 85 c0 74 0d 80 3d f8 ae 42 f8 00 0f 84 dc 00 00 00 8b 45 c8 0f b6 d3 31 ff 89 55 c0 8b 84 90 d8 03 00 00 0f b6 55 c7 <38> 50 5b 89 45 bc 0f 84 a8 00 00 00 a1 e4 d2 04 c2 85 c0 0f 84 [ 4481.611782] EIP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] SS:ESP 0068:e8175d9c [ 4481.614985] CR2: 0000000000000045 [ 4481.687441] ---[ end trace b11bc915fbac4412 ]--- Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: transport config n_no_reclaim_cmds should be unsignedJohannes Berg1-1/+1
The number of commands can never be negative, so it should be using an unsigned type. This also shuts up an smatch warning elsewhere in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: update UAPSD support TLV bitsAlexander Bondar3-7/+12
Change old UAPSD bit to PM_CMD_SUPPORT, and add a new bit to indicate real UAPSD support. Don't use UAPSD when the firmware doesn't support it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-4/+70
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18Merge branch 'for-john' of ↵John W. Linville4-30/+43
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-10-18iwlwifi: dvm: don't override mac80211's queue settingEmmanuel Grumbach1-11/+3
Since we set IEEE80211_HW_QUEUE_CONTROL, we can let mac80211 do the queue assignement and don't need to override its decisions. While reassiging the same values is harmless of course, it triggered a WARNING when iwlwifi and mac80211 came to different conclusions. This happened when mac80211 set IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the packet to the cab_queue because no stations were asleep. iwlwifi should not override mac80211's decicions for offchannel packets and packets to be sent after DTIM, but it should override mac80211's decision for AMPDUs since we have a special queue for them. So for AMPDU, we still override info->hw_queue by the AMPDU queue. This avoids: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883() Modules linked in: CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013 0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000 ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000 ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e Call Trace: [<ffffffff8189aa62>] ? dump_stack+0x41/0x51 [<ffffffff8105a4f2>] ? warn_slowpath_common+0x78/0x90 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff818a0040>] ? put_cred+0x15/0x15 [<ffffffff815f6db4>] ? iwlagn_mac_tx+0x19/0x2f [<ffffffff8186cc45>] ? __ieee80211_tx+0x226/0x29b [<ffffffff8186e6bd>] ? ieee80211_tx+0xa6/0xb5 [<ffffffff8186e98b>] ? ieee80211_monitor_start_xmit+0x1e9/0x204 [<ffffffff8171ce5f>] ? dev_hard_start_xmit+0x271/0x3ec [<ffffffff817351ac>] ? sch_direct_xmit+0x66/0x164 [<ffffffff8171d1bf>] ? dev_queue_xmit+0x1e5/0x3c8 [<ffffffff817fac5a>] ? packet_sendmsg+0xac5/0xb3d [<ffffffff81709a09>] ? sock_sendmsg+0x37/0x52 [<ffffffff810f9e0c>] ? __do_fault+0x338/0x36b [<ffffffff81713820>] ? verify_iovec+0x44/0x94 [<ffffffff81709e63>] ? ___sys_sendmsg+0x1f1/0x283 [<ffffffff81140a73>] ? __inode_wait_for_writeback+0x67/0xae [<ffffffff8111735e>] ? __cache_free.isra.46+0x178/0x187 [<ffffffff811173b1>] ? kmem_cache_free+0x44/0x84 [<ffffffff81132c22>] ? dentry_kill+0x13d/0x149 [<ffffffff81132f6f>] ? dput+0xe5/0xef [<ffffffff81136e04>] ? fget_light+0x2e/0x7c [<ffffffff8170ae62>] ? __sys_sendmsg+0x39/0x57 [<ffffffff818a7e39>] ? system_call_fastpath+0x16/0x1b ---[ end trace 1b3eb79359c1d1e6 ]--- Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: fix operator precedenceDavid Spinadel1-1/+2
Integers need to be multiplied before division. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: fix fw_rx_stats debugfs entryLuciano Coelho1-3/+6
The fw_rx_stats entry in debugfs was getting truncated because the internal buffer used to hold the string was too short. The calculation of the needed buffer size was rather bogus. Simplify the calculation by multiplying the number of entries in the entire structure by the size of each data line and adding the size of the header lines. Additionally, add the mac_id value, which was missing. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: BT Coex - enable Tx power based on BT statusEmmanuel Grumbach1-2/+2
The activity grading indication from the firmware should not be used in this case, but the bt_status in the firwmare notification. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: BT Coex - always set mandatory fieldsEmmanuel Grumbach2-3/+11
The firmware always expects the Coex Mode to be set. Moreover, the firmware expects bit 0 is the valid bits to be set all the times. I misunderstood the API and didn't set these bits when commands are sent to update the paramters of the Coex. As a result, the firmware understood that the BT Coex was disabled (Coex mode = 0) and ignored all the updates (valid bit 0 clear). Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-18iwlwifi: mvm: NVM - increase max section sizeIdan Kahlon1-1/+1
Section size limitation to 6000 is incorrect. NVM file need to support bigger sections in order to support PAPD tables. Signed-off-by: Idan Kahlon <idanx.kahlon@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Maor Perez <maorx.perez@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: support Signed firmware image and Dual CPUsEran Harary5-5/+197
Support Signed firmware based on code signing system (CSS) protocol and dual CPUs download, the code recognize if there are more than one CPU and if we need to operate the signed protocol according to the ucode binary image Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: mvm: fix scan request's suspend time parameterAlexander Bondar1-3/+3
This fix is related to a scan request when associated (bgscan). FW expects suspend time parameter in micro seconds while the driver provides a value in time units. This bug leads to a high traffic latency when scan is requested while traffic is in progress. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: mvm: add IBSS supportJohannes Berg7-41/+102
At the firmware level, IBSS support has similar programming requirements as AP/GO support, so use the same functions with just small differences. With IBSS only a single virtual interface can be used, so no changes in the advertised interface combinations are needed. For now, don't use hardware crypto for the GTKs in IBSS mode, the firmware should support it though. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: Support 7265 devicesEran Harary3-1/+19
7265 is a very similar device to 7260, so just add the definitions based on 7260 for it. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: don't WARN on bad firmware stateStanislaw Gruszka1-11/+11
When we restart firmware and it is marked as not alive, we can still get calls from mac80211. Don't WARN on in this situation as this triggers automatic bug reports with no valuable information. This continuation of: commit 8ca95995e64f5d270889badb3e449dca91106a2b Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Sun Sep 15 11:37:17 2013 +0300 iwlwifi: don't WARN on host commands sent when firmware is dead which remove WARN_ONCE from one place, but those warnings are also triggered from other functions. Patch also adds unlikely() statement. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 00:30:09 +0300