summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2014-03-11iwlwifi: mvm: make bt-coex.c genericEmmanuel Grumbach6-8/+8
Make bt-coex generic to allow other coex mechanisms. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-11iwlwifi: mvm: BT Coex add support for Co-running blockEmmanuel Grumbach7-3/+303
7265 features a new calibration which is called antenna coupling. The purpose of this calibration (which isn't really a calibration), is to measure the isolation between the antennas and that can give us useful information for the Coex modules. With this information, we can tune the LookUpTables (LUTs) that define the BT / WiFi contention policy. The LUTs currently contain dummy values - but they will be updated soon. While at it, change the current code to stop duplicate the host command while sending. This was needed back then, when the command was short enough to be allocated on the stack. Since then, the command grew a lot and is now allocated on the heap - hence we can use the NOCOPY option instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-11iwlwifi: dvm: take mutex when sending SYNC BT config commandEmmanuel Grumbach1-2/+6
There is a flow in which we send the host command in SYNC mode, but we don't take priv->mutex. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1046495 Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: abort scan on sched_scan requestArik Nemtsov4-14/+33
A scheduled scan is a more persistent setting and should take priority over temporary regular scans. Abort the regular when a sched_scan request arrives and then request the sched_scan. The kernel API allows sending a sched_scan without canceling a regular scan in progress, so this is our way to abstract the FW's limitations. Make the scan-cancel Rx handler async and flush after invocation to ensure new scans can't creep in before it. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: wait for stop sched-scan completionArik Nemtsov3-27/+46
cfg80211 assumes a scheduled scan is stopped synchronously. Wait for the FW before returning to caller. Don't do anything in the async handler in the stop-from-above flow. There's no need to call the mac80211 sched-scan completion as the cleanup will be automatic. Make sure the async handler is called before the next incoming scan changes the scan_status by flushing the async handlers after all invocations. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: check for d0i3 fw capabilityEliad Peller3-3/+17
Check for both cfg->d0i3 and fw d0i3 support in order to enable d0i3 support. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: fix scan offload for BGN SKUEmmanuel Grumbach1-7/+1
BGN SKU won't scan on 5.2GHz obviously, but the firmware still expects the driver to reserve space for the the probe request for the 5.2GHz band. Fix this by allocating space and leave it empty. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69541 Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: return whether to stop from rfkill methodJohannes Berg7-14/+25
When indicating RF-kill toggle to the higher layer, that may in turn call back to the transport (for MVM at least) to turn off the device quickly. Instead of that, allow it to return whether or not the device should be turned off, this gets rid of the call indirection and will help make the API more consistent when we go back to non-threaded interrupts again for PCIe. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: pcie: enable LP XTAL to reduce power consumptionAlexander Bondar7-3/+200
1. Enable LP XTAL to avoid HW bug where device may consume much power if FW is not loaded after device reset. LP XTAL is disabled by default after device HW reset. Configure device's "persistence" mode to avoid resetting XTAL again when SHRD_HW_RST occurs in S3. 2. Add methods to access SHR (shared block memory space) directly from PCI bus w/o need to power up MAC HW. Shared internal registers (e.g. SHR_APMG_GP1, SHR_APMG_XTAL_CFG)can be accessed directly from PCI bus through SHR arbiter even when MAC HW is powered down. This is possible due to indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers. Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW need not be powered up so no "grab inc access" is required. For example, to read from SHR_APMG_GP1 register (0x1DC), first, write to the control register: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access) second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0]. To write the register, first, write to the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then: HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access) Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: disable power on P2P client when BSS is addedAvri Altman1-5/+12
When power update is initiated on BSS STA while P2P client exists, the power command will be sent only on BSS STA vif ignoring P2P client. Since the firmware has symmetric constraints on the power save enablement we can simplify the code a bit. The current firmware doesn't know how to enable power management on P2P client. Even BSS power management must be disabled when a P2P client is added. Future firmware will support power save on BSS and P2P client as long as they are on different channels. This was buggy since we didn't disable power management on P2P client interface if BSS added on the same channel. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: nvm: fix VHT capability antenna-dependent fieldsJohannes Berg1-8/+11
As the antenna dependent fields depend on the firmware file and not the NVM, use those fields in the VHT capability creation. Additionally, fix the STBC and antenna pattern consistency fields. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: fix quota for D3 imageEmmanuel Grumbach1-2/+2
New firmware enforce valid values for the quota in D3. The values given to the firmware when suspending and using WoWLAN where dummy - change them to realistics values. Tested-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: cleanups in iwl_dbgfs_frame_stats_readEyal Shapira1-15/+19
Switch pos to char * which makes the code a bit shorter as well as other minor cleanups suggested by Joe Perches. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: pcie: suppress ACPI related error messageJohannes Berg1-1/+2
This message triggers on systems that don't support the API, so suppress them when not debugging as it's not useful to see it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-09iwlwifi: mvm: init drv_stats_lockJohannes Berg1-0/+2
Otherwise lockdep complains about the lock, I'm not sure why we didn't see this before. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-04Merge branch 'master' of ↵John W. Linville8-24/+68
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-03-04iwlwifi: fix and add 7265 series HW IDsOren Givon1-3/+2
Update of the HW IDs for the 7265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-04iwlwifi: mvm: don't WARN when statistics are handled lateEmmanuel Grumbach1-2/+5
Since the statistics handler is asynchrous, it can very well be that we will handle the statistics (hence the RSSI fluctuation) when we already disassociated. Don't WARN on this case. This solves: https://bugzilla.redhat.com/show_bug.cgi?id=1071998 Cc: <stable@vger.kernel.org> [3.10+] Fixes: 2b76ef13086f ("iwlwifi: mvm: implement reduced Tx power") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-27iwlwifi: fix TX status for aggregated packetsJohannes Berg2-14/+18
Only the first packet is currently handled correctly, but then all others are assumed to have failed which is problematic. Fix this, marking them all successful instead (since if they're not then the firmware will have transmitted them as single frames.) This fixes the lost packet reporting. Also do a tiny variable scoping cleanup. Cc: <stable@vger.kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [Add the dvm part] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-27iwlwifi: mvm: change of listen interval from 70 to 10Max Stepanov1-1/+1
Some APs reject STA association request if a listen interval value exceeds a threshold of 10. Thus, for example, Cisco APs may deny STA associations returning status code 12 (Association denied due to reason outside the scope of 802.11 standard) in the association response frame. Fixing the issue by setting the default IWL_CONN_MAX_LISTEN_INTERVAL value from 70 to 10. Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-25Merge branch 'for-john' of ↵John W. Linville34-225/+713
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-02-23iwlwifi: mvm: fix a few wd_disable commentsEliad Peller2-3/+2
Few minor comments. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-23iwlwifi: mvm: prepare infrastructure for more TLV flagsEran Harary3-0/+65
We use the TLV flags as a handshake between the firmware and the driver. These flags allow the firmware to advertise its capabilities and API version. Since we are running short of bits, we add a new infrastructure which is more scalable, yet backward compatible. We make now the difference between API changes and the capabilities. Both can have an index which allows to scale at will. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-23iwlwifi: mvm: remove redundant define in fw.cInbal Hacohen1-2/+0
This define is a leftover from dvm (in mvm, it was replaced by MVM_UCODE_ALIVE_TIMEOUT). Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-23iwlwifi: nvm: remove reading valid antennas from NVMJohannes Berg2-19/+0
These values aren't used as the firmware values should be used, so reading them is pointless and hides potential errors when somebody uses these values. Leave them zero to make it clearer that they can't be used. We can't remove the struct members as the DVM driver does read the values from EEPROM/OTP and the structure is shared between drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20iwlwifi: mvm: add Rx frames statistics via debugfsEyal Shapira4-2/+185
Collect statistics regarding rates and aggregations in Rx frames and export the data via debugfs. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20iwlwifi: mvm: set immediate apply time bit in time eventsEmmanuel Grumbach2-2/+5
Newer firmware support a new bit in the policy that allows to request to apply the time event immediately. Add this bit without removing the workarounds we used until now to support older firmares. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20iwlwifi: pcie: stop the firmware when we restart itEmmanuel Grumbach1-2/+3
In case the firmware didn't assert but we want to restart it, e.g. we didn't get the reply for a host command, or the Tx queues are stuck, we should stop the firmware by provoking an interrupt. This allows to better debug the firmware in these bad scenarios. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20iwlwifi: mvm: fix possible memory leakEytan Lifshitz1-0/+1
iwl_parse_nvm_data() doesn't free allocated memory if it is fed with invalid parameter. Fix this. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20iwlwifi: dvm: clear IWL_STA_UCODE_INPROGRESS when assoc failsEmmanuel Grumbach1-0/+1
We set IWL_STA_UCODE_INPROGRESS flag when we add a station and clear it when we send the LQ command for it. But the LQ command is sent only when the association succeeds. If the association doesn't succeed, we would leave this flag set and that wouldn't indicate the station entry as vacant. This probably fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1065663 Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-20mac80211: allow driver to return error from sched_scan_stopJohannes Berg1-2/+4
In order to solve races with sched_scan_stop, it is necessary for the driver to be able to return an error to propagate that to cfg80211 so it doesn't send an event. Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13Merge branch 'master' of ↵John W. Linville8-41/+59
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-13iwlwifi: disable TX AMPDU by default for iwldvmEmmanuel Grumbach4-9/+48
NICs supported by iwldvm don't handle well TX AMPDU. Disable it by default, still leave the possibility to the user to force enable it with a debug parameter. NICs supported by iwlmvm don't suffer from the same issue, leave TX AMPDU enabled by default for these. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: don't dump log of second CPU when not relevantEmmanuel Grumbach1-1/+3
The new API for ALIVE notification was misunderstood. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: remove iwl_fw_valid_(tx|rx)_ant inlinesJohannes Berg10-32/+22
These inlines are pretty pointless now as they just return a fixed struct value, remove them - the code even gets shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: new NVM format in family 8000Eran Harary8-71/+271
Support the changes below: - Fields and sections structure were changed. - the NVM file built from DWord instead of Words. - sections header format was changed. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: Enable power save on BSS and P2P client in DCMAlexander Bondar5-20/+44
New FW enables support for power save on BSS and P2P client MACs simultaneously when they function on different channels (DCM). Enable this case in the driver after examining new TLV flag - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM. Still power management is not allowed on both MACs if they function on a same channel. Remove another redundant TLV flag - IWL_UCODE_TLV_FLAGS_P2P_PS that is not in use anymore. Remove bound_vif_cnt as redundant. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: add debugfs for prph reg read/writeEliad Peller2-0/+45
Allow reading/writing prph registers. The address is set in the first argument of the write operation. second argument is optional and can be used for writing. e.g. echo '0xA01234 0x99' > /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg will write 0x99 into reg 0xA01234 cat /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwlmvm/prph_reg will show its current value (probably 0x99) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: use IEEE80211_TX_CTRL_PORT_CTRL_PROTO flagJohannes Berg1-1/+1
Instead of checking the SKB protocol against EAP, check the IEEE80211_TX_CTRL_PORT_CTRL_PROTO flag that more generally indicates whether or not the frame is a port control frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: propagate LDPC / STBC status to radiotapEmmanuel Grumbach4-2/+15
This will allow to get sniffer captures with correct settings for these HT / VHT capabilities. Also set the corresponding HAVE_MCS / VHT_KNOWN bits in the registration to mac80211. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: make various things constJohannes Berg10-13/+12
There are a number of things in the .data section that should really be in .rodata, for example all ops structs and strings. Mark everything const that can be, leaving the .data section pretty much empty. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: pcie: clean iwl_pcie_[rt]xq_inc_wr_ptr a bitEliad Peller2-63/+47
The various code blocks in iwl_pcie_[rt]xq_inc_wr_ptr finally do the same things, so just merge them all and make the functions cleaner. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13Merge branch 'for-john' of ↵John W. Linville4-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-02-06iwlwifi: change number of PAPD groups in PHY DBAriej Marjieh1-2/+2
The number of the PAPD group was increased in new devices. Since we might now get empty entries on older devices, don't warn if an entry is empty. Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: mvm: support alive notification api version2Eran Harary4-12/+132
Alive notification ver2 support error table information for 2 CPUs. This is useful to fetch the error information in case of firmware assert. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: 8000: add 11n only SKU of 8000 devicesAriej Marjieh2-0/+10
The 8000 family includes devices that don't support 11ac. Add an iwl_cfg structure for them. Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: mvm: remove upper limit for error log base pointerAriej Marjieh1-1/+1
Newer NIC have different memory layout in their SRAM, so change the checks in iwl_mvm_dump_nic_error_log accordingly. Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: mvm: modify the tsf_id master/slave logicIlan Peer1-30/+46
For TSF master/slave synchronization, the FW does not require exact match in the beacon interval between the master interface and the slave one, but instead requires that the beacon interval of one interface is the module of the other. Modify the tsf_id selection to align with the above. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: mvm: reserve sta_id 0 to stationEliad Peller4-36/+24
The d3/d0i3 fw code requires the sta_id to be 0 (this is used to determine the rates and keys to use in arp offloading). Reserve sta_id 0 to station interface in order to comply with this requirement. Change some functions prototypes in order to make the allocation function know about the interface type. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: mvm: fix typo in WARNING in rs.cEmmanuel Grumbach1-1/+1
The current WARNING isn't very helpful. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 03:52:10 +0300