summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/pcie
AgeCommit message (Collapse)AuthorFilesLines
2013-01-30Merge branch 'for-john' of ↵John W. Linville10-13/+14
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-01-28Merge branch 'master' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-24iwlwifi: provide RX page orderEmmanuel Grumbach1-0/+1
When the pages are to be used by front-end, it may need to know the page order, provide it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: update copyrightJohannes Berg10-13/+13
Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: improve the reports in TX pathEmmanuel Grumbach2-5/+45
Also when things go wrong (queues don't get emtpy), try to get some data from the HW. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: enable communication with WoWLAN firmwareJohannes Berg4-18/+104
On resuming, the opmode may have to be able to talk to the WoWLAN/D3 firmware in order to query it about its status and wakeup reasons. To do that, the opmode has to call the new d3_resume() transport API which will set up the device for command communcation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: simplify scheduler memory clearingJohannes Berg1-15/+7
Writing 130 dwords into the device one by one is rather inefficient, every one needs to lock, grab NIC access (a few register reads/writes) and then write the address and data registers. Use the new memory clearing function to make this easier and faster. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: allow to zero SRAMEmmanuel Grumbach1-1/+2
Sending a NULL pointer to iwl_trans_write_mem allows now to zero SRAM. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: don't enable all interrupts on resumingJohannes Berg1-3/+0
Enabling the RF-kill interrupt is sufficient for getting RF-kill notifications, and no other interrupt is needed as the device isn't functional when suspended and will be restarted/reconfigured when mac80211 resumes it later. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16iwlwifi: don't memset scalar valuesJohannes Berg2-4/+4
The dma_addr_t type is a scalar value, so it should just be assigned, not memset. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: always check that grab_nic_access succeedsEmmanuel Grumbach1-2/+2
This allows to let sparse check that the NIC access is always released. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: move some PCIe calls to better placesJohannes Berg2-6/+5
Synchronizing the IRQ is pointless when we will then enable the RF-Kill interrupt again, but is needed before we free it and the data needed to handle IRQs; move it to the free function. Simiarly, cancelling the replenish work struct can move to the function that frees the RX data structures. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: request IRQ only onceJohannes Berg2-41/+25
There's no need to request the IRQ every time the device is started, we can request it just once. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize SRAM accessEmmanuel Grumbach2-13/+54
Different transports implement the access to the SRAM in different ways. Virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: virtualize iwl_{grab,release}_nic_accessEmmanuel Grumbach1-0/+64
Since different transports have different ways to wake the up the NIC, we need to virtualize it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: fix PCIe interrupt handle return valueJohannes Berg1-0/+1
By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4 ("iwlwifi: protect use_ict with irq_lock") changed the return value of the iwl_pcie_isr() function in case it handles an interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED. Put back the correct return value. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: let the op_mode run a FW while in RFKILLEmmanuel Grumbach1-2/+2
In some cases, the fw should run even if the NIC is in RFKILL. Make the API more flexible to allow that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: make the BC table layout configurableEmmanuel Grumbach3-1/+7
This is needed for newer NICs. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-14Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-6/+2
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-12Merge branch 'for-john' of ↵John W. Linville7-38/+69
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-12-11iwlwifi: don't handle masked interruptEmmanuel Grumbach1-2/+10
This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: Use standard #defines for PCIe Capability ASPM fieldsBjorn Helgaas1-5/+2
Use the standard #defines rather than creating local definitions for PCIe Capability ASPM fields. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: collapse wrapper for pcie_capability_read_word()Bjorn Helgaas1-10/+3
iwl_pciexp_link_ctrl() has only one call site and no longer provides any useful abstraction, so collapse it into the caller. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: reset_ict in stop_hwEmmanuel Grumbach1-0/+2
Since the device is taken down in stop_hw, call reset_ict from there too. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: move prph handling into the transportEmmanuel Grumbach1-0/+16
New transports may handle it internally for better performance. Also move the tracing inside PRPH access which will make the output more readable: iwlwifi_dev_ioread_prph32: Read 0x0 from SCD_AGGR_SEL (32-bit) instead of the corresponding accesses to HBUS_TARG_PRPH_*. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: Change define and struct names in iwl-eeprom-parse.hEytan Lifshitz4-32/+32
Since we will have several forms of NVM (EEPROM, OTP, etc.) and they will have different layouts, make the parsed data more generic. This allows functional code to be independent of a specific layout. Also change some variables and function names from having "eeprom" to "nvm" in their name. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: remove __dev* attributesBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-29iwlwifi: return real info in probe failureEmmanuel Grumbach1-3/+8
Don't return a hard coded -EFAULT, but rather the error that occurred in the flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28iwlwifi: read the Rx write pointer only onceEmmanuel Grumbach1-1/+1
The FH (DMA engine) tells the driver the index of the last ready (closed) Rx buffer. This data is in closed_rb_num. If we read this data several times we may get inconsistencies between the code and the debug prints which can make it harder to debug issues here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-21Merge branch 'for-john' of ↵John W. Linville5-1336/+1290
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-21Merge branch 'master' of ↵John W. Linville1-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-19iwlwifi: Remove duplicate inclusion of iwl-trans.h in pcie/drv.cSachin Kamat1-1/+0
iwl-trans.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: make iwl_pcie_rxq_inc_wr_ptr staticEmmanuel Grumbach2-3/+1
It is not used outside pcie/rx.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: more cleanup in pcie/rx.cEmmanuel Grumbach3-12/+4
Really trivial clean up. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: make iwl_queue_used return boolEmmanuel Grumbach2-3/+3
Also, prefer the if(!X) notation over if(X == 0). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: merge 2 functions in reclaim flowEmmanuel Grumbach1-33/+20
One one just a wrapper of the second, squash them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/tx.cEmmanuel Grumbach3-915/+913
Rename static functions. Function moved from trans.c to tx.c. A few could be made static, others had to be exported. Functions that implement the transport API are prefixed by iwl_trans_pcie_, the others by iwl_pcie_. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/trans.cEmmanuel Grumbach1-37/+31
Functions that implement the transport API are prefixed by iwl_trans_pcie_, the others by iwl_pcie_. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/rx.cEmmanuel Grumbach3-212/+216
Rename static functions. Function moved from trans.c to rx.c. A few could be made static, others had to be exported. Also, don't use rxb or rxbuf, but rb which stands for receive buffer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: init the replenish work in rx_initEmmanuel Grumbach1-2/+3
This is its natural place Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: rename functions in transport layerEmmanuel Grumbach4-242/+218
1) s/tx_queue/txq for the sake of consistency. 2) s/rx_queue/rxq for the sake of consistency. 3) Make all functions begin with iwl_pcie_ iwl_queue_init and iwl_queue_space are an exception since they are not PCIE specific although they are in pcie subdir. 4) s/trans_pcie_get_cmd_string/get_cmd_string it is much shorter and used in debug prints which are long lines. 5) s/iwl_bg_rx_replenish/iwl_pcie_rx_replenish_work this better emphasizes that it is a work 6) remove invalid kernelDOC markers pcie/tx.c and pcie/trans.c still needs to be cleaned up. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: add comments for the PCIe transport statusesEmmanuel Grumbach1-4/+10
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-18iwlwifi: don't WARN when a non empty queue is disabledEmmanuel Grumbach1-8/+0
This can happen when we shut down suddenly an interface. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16Merge branch 'for-john' of ↵John W. Linville4-40/+128
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-14wireless: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches1-18/+10
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14iwlwifi: don't enable interrupt as a W/A when MSI is enabledEmmanuel Grumbach1-9/+8
This is not needed, the comment there was wrong, it is only needed when MSI was *not* enabled. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-14iwlwifi: don't warn if transport's allocation failedEmmanuel Grumbach1-1/+1
The allocation failure will already be very verbose. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09iwlwifi: return commands with error on FW errorJohannes Berg4-0/+15
When a firmware error occurs, don't just abort synchronous commands but also return an error (-EIO) and block any new commands as well. Currently, an error is only returned if WANT_SKB was set which is confusing and can lead to issues. Blocking is done until a new firmware image is loaded. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07iwlwifi: remove useless messagesJohannes Berg1-9/+0
There's no need to print the PCI resource length and base address, nor the hardware revision ID (which can be found in lspci) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: check the SCD conf from ALIVE responseEmmanuel Grumbach1-3/+7
The ALIVE response of new fw inclues the base address of the SCD in SRAM. Until we read it from a prph register, which was set by the fw. Since the fw might well stop updating the prph register, add a WARN when there is an inconsitency between the ALIVE response and the register to catch any change in the behavior. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 08:24:51 +0300