summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2014-02-04iwlwifi: mvm: add low-latency frameworkJohannes Berg3-1/+74
For various traffic use cases, we want to be able to treat multi- channel scenarios differently. Introduce a low-latency framework that currently only has a debugfs file to enable low-latency mode, but can later be extended. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: notify scan completed even if no fw_restartDavid Spinadel2-21/+24
Notify scan completed if fw_restart flow isn't going to be run. Otherwise, the scan will stay stack forever and mac80211 will not be able to remove the interface. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: don't stop sched scan in restartDavid Spinadel1-1/+1
Don't stop scheduled scan before reporting HW restart; mac80211 was changed to reschedule it after reconfigure. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: check ARRAY_SIZE(mvm->fw_id_to_mac_id) = IWL_MVM_STATION_COUNTEmmanuel Grumbach1-0/+7
Since we use IWL_MVM_STATION_COUNT all over the driver, we need to make sure that it is the right constant to look at. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: provide helper to fetch the iwl_mvm_sta from sta_idEmmanuel Grumbach3-18/+25
We somtimes need to fetch the iwl_mvm_sta structure from a station index - provide a helper to do that. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: pcie: disable APMG configurations for family 8000Eran Harary1-3/+4
APMG HW block was removed in this NIC, hence, no need to configure it. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: support NVM sections for family 8000Eran Harary4-25/+25
The identification of the hardware section in the NVM of new devices has been changed, hence the need to add it to iwl_cfg and adapt the code that uses this value accordingly. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: mvm: implement AP/GO uAPSD supportJohannes Berg7-77/+268
Newer firmware will support uAPSD clients in AP/GO mode, so complete the driver support for it. The way it works is described in comments in the code, but basically the driver just has to pass down all the mac80211 requests and do accounting on agg/non-agg queues properly. For older firmware, this doesn't change anything as it ignores the fields used by the new firmware, and we only advertise uAPSD support when the firmware does. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-02iwlwifi: mvm: BT Coex - disable BT when TXing probe request in scanEmmanuel Grumbach1-1/+2
Not doing so will let BT kill our probe requests leading to failures in scan. Cc: <stable@vger.kernel.org> [3.10+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-30iwlwifi: mvm: don't leak a station when we drainEmmanuel Grumbach1-36/+37
We had a bug that prevented us from removing a station after we entered the drain flow: We assign sta to be NULL if it was an error value. Then we tested it against -EBUSY, but forget to retrieve the value again from mvm->fw_id_to_mac_id[sta_id]. Due to this bug, we ended up never removing the STA from the firmware. This led to an firmware assert when we remove the GO vif. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-30iwlwifi: mvm: notify match found without filteringDavid Spinadel2-1/+5
Configure scheduled scan to notify match found on every beacon or probe response if the scan request doesn't contain valid ssid list for filtering. Without this configuration the FW passes all beacons to the host but doesn't notify the stack that the scan results are ready for processing. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-30iwlwifi: mvm: print the version of the firmware when it assertsEmmanuel Grumbach1-0/+2
This can be useful to be able to spot the firmware version from the error reports without needing to fetch it from another place. Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-30iwlwifi: mvm: disable scheduled scanJohannes Berg1-1/+1
The iwlwifi scheduled scan implementation doesn't adhere to the userspace API correctly - the API assumes that any new incoming 'incompatible' request (like scan or remain-on-channel for this driver) will just cancel the scheduled scan. Instead our driver relies on userspace cancelling it, thus breaking existing wpa_s versions. Cc: stable@vger.kernel.org [3.13] Fixes: 35a000b7c1bb ("iwlwifi: mvm: support sched scan if supported by the fw") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-30iwlwifi: mvm: make local pointer non-staticJohannes Berg1-1/+1
The address pointer used in the function shouldn't be static since it's local data only. Having it static causes races if a single machine has two devices, as the pointer would be shared between instances. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-16Merge branch 'for-john' of ↵John W. Linville10-41/+52
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-01-14iwlwifi: mvm: add REPLY_SF_CFG_CMD to cmd stringsDavid Spinadel1-0/+1
Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: fix theoretical uninitialized function return valueEytan Lifshitz1-1/+1
If we try to write NVM that do not exist, the function will return uninitialized value. fixed. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: add inline helper for packet lengthsJohannes Berg3-13/+10
Add an inline helper function for getting an RX packet's length or payload length and use it throughout the code (most of which I did using an spatch.) While at it, adjust some code, and remove a bogus comment from the dvm calibration code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: reset Thermal Throttling's SMPS request upon disassociationEmmanuel Grumbach1-0/+2
The request of SMPS issued by the Thermal Throttling code was not reset when we disassociated - fix that. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: remove unused flags from add station commandEmmanuel Grumbach1-3/+0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: use array indexing instead of treating it as a pointerJohannes Berg1-2/+2
It's a bit strange to treat an array as a pointer, so use proper array indexing instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: fix SRAM dump debugfs handlerEmmanuel Grumbach1-1/+1
If the length isn't set it means we want all the SRAM. Also - this is perfectly valid to partially dump starting at offset 0. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: rs: fix a theoretical out of bounds accessEyal Shapira1-5/+5
Discovered by klocwork Array 'iwl_rate_mcs' of size 15 may use index value(s) -1 * rs.c:2562: index = iwl_hwrate_to_plcp_idx(rate) * rs.c:2562: Result of function call 'iwl_hwrate_to_plcp_idx(rate)' is '[-1,14]' * rs.c:2565: Array 'iwl_rate_mcs' size is 15. * rs.c:2565: Possible attempt to access element -1 of array 'iwl_rate_mcs'. While at it stop using index = -1 and always use IWL_RATE_INVALID Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: send all the NVM sections to the NICEmmanuel Grumbach1-6/+5
Some NIC comes with more than the 4 NVM (non volative memory) sections described in the nvm_to_read array. These NICs usually get their NVM from an external file fetched from userland during init. We already parsed the file, but sent to the NIC only 4 NVM sections whereas there could be more sections in the file. Fix this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-14iwlwifi: mvm: fix tx seq_ctrl debug printEliad Peller1-3/+2
Since seq_number is incremented right after using it, so printed seq_ctrl was actually the next one to be used. Fix it by incrementing the seq_number only later, before saving it. Additionally, use the IEEE80211_SEQ_TO_SN macro in order to print the actual sequence number. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-13iwlwifi: mvm: don't set the drain bit when we flush the AP stationEmmanuel Grumbach1-2/+2
When we disassociate in managed mode, we flush the queues after mac80211 has already removed the station. During that time, the pointer to ieee80211_sta to the fw_id_to_mac_id map is -EINVAL. In that case we should not set the station as being drained when the last Tx of this station has exited the shared Tx queue since we are flushing all the queues anyway. The draining logic is meant to be used in GO / AP mode only. In GO / AP mode, we set -EBUSY in the fw_id_to_mac_id map. This is why testing the ieee80211_sta pointer in the fw_id_to_mac_id map with IS_ERR isn't enough to set the station as draining, we need to check that it is -EBUSY. The only impact of the bug was a print: Drained sta 1, but it is internal? Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13iwlwifi: mvm: rs: fix handling of column switch errorEyal Shapira1-1/+2
If we can't switch to a column because no rates are supported in that column this led to a state where the search cycle got stuck and never ended. This in turn also led to aggregation not being turned on. Fix this by marking a column as visited if we can't switch to it. Reported-and-tested-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-13iwlwifi: mvm: fix missing cleanup in .start() error pathEliad Peller1-0/+1
Cleanup of iwl_mvm_leds was missing in case of error, resulting in the following warning: WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210() kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory. which prevents further reloads of the driver. Cc: stable@vger.kernel.org [3.10+] Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-13iwlwifi: mvm: update power after binding in start_ap_ibss()Ilan Peer1-4/+14
The power settings need to be updated after a binding flow is done and before quota calculations. This was missing in the start_ap_ibss() flow. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-13iwlwifi: mvm: clear ap_ibss_active in case of failureIlan Peer1-0/+4
The state variable was not set to false in case of a failure to complete the start_ap_ibss() flow. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-01-04wireless: delete non-required instances of include <linux/init.h>Paul Gortmaker2-2/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-04Merge branch 'for-john' of ↵John W. Linville40-170/+253
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-12-31iwlwifi: mvm: fix coccinelle warningsFengguang Wu1-1/+1
drivers/net/wireless/iwlwifi/mvm/led.c:106:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: coccinelle/misc/semicolon.cocci CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach40-78/+78
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: rs: fix a potential NULL derefEyal Shapira1-4/+3
Found by klocwork analysis. mvm could be NULL which may cause a NULL dereference in a theoretical call flow rs_fill_lq_cmd(mvm = NULL, ...) rs_build_rates_table rs_fill_rates_for_column ucode_rate_from_rs_rate IWL_ERR(mvm,...) No real reason for passing NULL to rs_fill_lq_cmd so fix that. Reported-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: dynamically update tsf_idIlan Peer3-30/+91
Currently, the MAC context tsf_id assignment and the master/slave relations are determined only when a new vif is added, as part of the MAC context resource allocation. However, at this stage, the beacon interval is not known, and thus could not be taken into account in the master-slave algorithm. To fix this, recalculate the MAC context tsf_id assignment, just before the MAC context is activated, i.e., just before a station VMAC is configured to associated and before an AP VMAC is started. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: change the parameters for calculating an AP TBTTIlan Peer1-1/+1
Change the parameters for calculating an AP TBTT to 64/36 instead of 80/20, to increase the interval between a station vif and an AP vif TBTT events. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: Add a missed beacons thresholdIlan Peer2-5/+21
Instead of always calling ieee80211_beacon_loss() on every missed beacons notification, call this function only if the number of consecutive missed beacons from last rx is higher than a predefined threshold. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: squash a spurious warning on chnctx changeArik Nemtsov1-1/+2
If the channel min-width changes, we can update the PHY ctx, even if it has multiple references. Signed-off-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: dump to debugfs the SRAM as binaryEmmanuel Grumbach1-28/+21
This allows to format it at will using external tools. Since different teams want it in different formats, dump the raw data and everyone can play with the data the way they want. While at it - make this code slightly more robust by making the required verification on the offsets / length in the write handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: BT Coex - update channel inihibition for channel 14Emmanuel Grumbach1-2/+2
This channel inhibition for channel 14 was wrong. Fix it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: fix harmless smatch / coccinelle warningsEmmanuel Grumbach2-3/+3
Don't check if mvm->fw->cs is NULL since it can't be. cs is an array member of iwl_fw, it can't be NULL. Use memset(ptr, 0, sizeof(*ptr)); instead of memset(ptr, 0, sizeof(struct ptr_type)); Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: disable the device as soon as RFKILL firesEmmanuel Grumbach2-2/+9
The firmware needs to be stopped quickly (100ms) after the RFKILL interrupt fired. Failing to do so would allow the firmware to access the radio registers which would lead to a hardware error. Before this change, we would kill the firmware only when mac80211 stops the device which can take a fair amount of time. Take a shortcut by stopping the device right away in the interrupt. This is not relevant if the current firmware is INIT firmware since that firmware can run while in RFKILL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: fix possible memory leakEytan Lifshitz1-5/+6
In case of invalid section_id, the function returns after it aleready allocated memory. Fixed by change the order of actions. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: mvm: fix AC / FIFO mappingEmmanuel Grumbach1-10/+15
The AC / fifo mapping was wrong - BE packets landed in VO FIFO. The iwl_mvm_tx_fifo enumeration isn't in the same order as ieee80211_ac_numbers enumeration. Since the firmware relies on fifo / ac mapping - this led to wrong behavior. E.g. the firmware sends beacon with the same QoS parameters as VO, and it actually took the parameters of BK. There are probably more severe issues. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-19Merge branch 'for-john' of ↵John W. Linville20-618/+1602
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-12-18iwlwifi: mvm: rs: fix variable shadowingJohannes Berg1-5/+3
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: EyalX Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-18iwlwifi: mvm: rs: fix RTS protection being set indefinitelyEyal Shapira1-13/+0
RTS protection was turned on once aggregation was enabled but it was never turned off. Remove turning on RTS protection in the LQ command completely as TX_CMD_FLG_PROT_REQUIRE gets set in iwl_mvm_set_tx_cmd for every Tx which is part of an aggregation. This would already cause RTS protection to be used during aggregations. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: disable MCS9 Tx workaroundEyal Shapira1-0/+8
MCS9 introduces some corner cases in the current rs algorithm which may lead to non optimal throughput and instability in the throughput. Until all the corner cases are resolved disable MCS9 for Tx as a workaround which yields better throughput results as MCS8 is much more stable. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: Do not allow AP MAC context update if not activeIlan Peer1-0/+5
Fix a regression introduced in "iwlwifi: mvm: fix ht protection flags" where an AP/IBSS MAC context could have been updated even before the context was added to the FW. This fix avoids the following warning: WARNING: ... at .../drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c:1132 iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]() Changing inactive MAC 0c:8b:fd:01:1a:30/3 Modules linked in: [...] Call Trace: [<c16041fd>] dump_stack+0x41/0x52 [<c1041074>] warn_slowpath_common+0x84/0xa0 [<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<c1041133>] warn_slowpath_fmt+0x33/0x40 [<f80d8f45>] iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<f80d517a>] iwl_mvm_bss_info_changed+0x22a/0x4b0 [iwlmvm] [<c160831d>] ? mutex_unlock+0xd/0x10 [<f80d4678>] ? iwl_mvm_configure_filter+0x58/0x70 [iwlmvm] [<f80d4f50>] ? iwl_mvm_mac_tx+0xc0/0xc0 [iwlmvm] [<f8132d83>] ieee80211_bss_info_change_notify+0xa3/0x1d0 [mac80211] [<f8149247>] ? ieee80211_del_virtual_monitor+0x127/0x1f0 [mac80211] [<f8149cac>] ieee80211_do_open+0x12c/0xeb0 [mac80211] [<c106c6de>] ? __raw_notifier_call_chain+0x1e/0x30 [<c106c70f>] ? raw_notifier_call_chain+0x1f/0x30 [<f814aa8d>] ieee80211_open+0x5d/0x60 [mac80211] [<c1500c7b>] __dev_open+0xab/0x140 [<c160b39a>] ? _raw_spin_unlock_bh+0x2a/0x30 [<c1500f41>] __dev_change_flags+0x81/0x160 [<c10ab6fc>] ? __lock_is_held+0x3c/0x60 [<c15010d1>] dev_change_flags+0x21/0x60 Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 20:40:50 +0300