summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2014-07-07iwlwifi: mvm: rs: don't save debugfs filesEliad Peller2-26/+10
These file are removed recursively anyway, so there's no point saving them just to redundantly remove them later. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: rs: don't clear persistent fieldsEliad Peller2-52/+59
iwl_mvm_rs_rate_init() is called multiple times to re-init the rate scaling statistics (e.g. after some idle time). It clears all the lq_sta sta, including some fields that shouldn't be cleared (e.g. debugfs pointers). Fix it by adding a new 'persistent' sub-struct, and avoid clearing it on (re-)init. Move the initialization of the persistent fields to rs_alloc_sta instead. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: warn about empty OTPEran Harary1-0/+2
Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - relax constraints when TTC / RRC is activeEmmanuel Grumbach2-9/+18
When TxTxCo-Running is active, we can relax the constraints on the rate control. When RxRxCo-Running is active, we can relax the constrains on SMPS. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - fix debugfs with old APIEmmanuel Grumbach1-35/+148
Fix the debugfs hook to make it able to display the data with the old firmware API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - add High Band retentionEmmanuel Grumbach2-0/+3
Tell the firmware if TTC should be enabled when switching to High Band. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - convert reduced Tx power to new APIEmmanuel Grumbach1-22/+7
No need to send the big BT_COEX_CMD command, we have now a much thiner command that updates only what is needed. Adapt the code to that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - convert the co-running update to new APIEmmanuel Grumbach1-29/+7
No need to send the big BT_COEX_CMD command, we have now a much thiner command that updates only what is needed. Adapt the code to that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - convert the sw boost update to new APIEmmanuel Grumbach1-42/+16
No need to send the big BT_COEX_CMD command, we have now a much thiner command that updates only what is needed. Adapt the code to that, and open the patch to the updates. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - new APIEmmanuel Grumbach6-175/+233
Start the new BT Coex implementation. Don't react to notifications for now - only the initial configuration is implemented. The rest will happen in next patches. Since coex.c now uses the new the new structures in all functions, we need to adapt the code to compile, even if it doesn't run yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: BT Coex - prepare towards new APIEmmanuel Grumbach6-38/+1446
A new API is coming. This new API is not backward compatible. So we need to keep the old commands to be able to work with the former API. Move all the current code into a new file: coex_legacy. If a firmware with the new API is detected, we currently just bail out since the implementation of the new API will come in future patches. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: fix merge damageEmmanuel Grumbach1-7/+0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: remove unused flags from TX commandEmmanuel Grumbach2-15/+2
These flags are not used by the firmware anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: wait for d0i3 exit in add interface flowGregory Greenman2-9/+32
This patch makes sure there're no target accesses in the add interface flow before d0i3 exit completes. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: update layout of firmware error dumpEmmanuel Grumbach1-1/+1
The memory was not zeroed - fix that. Also update the iwl_fw_error_dump_info structure. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: kill iwl_mvm_fw_error_rxf_dumpEmmanuel Grumbach4-132/+100
Its content can move to the caller. While at it, move iwl_mvm_fw_error_rxf_dump to caller. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: mvm: don't collect logs in the interrupt threadEmmanuel Grumbach3-44/+12
Instead of reading all the data in the context of the interrupt thread, collect the data in the restart flow before the actual restart takes place so that the device still has all the information. Remove iwl_mvm_fw_error_sram_dump and move its content to iwl_mvm_fw_error_dump. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextEmmanuel Grumbach3-12/+22
2014-07-06Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach2-9/+15
2014-07-03iwlwifi: mvm: disable CTS to SelfEmmanuel Grumbach1-3/+2
Firmware folks seem say that this flag can make trouble. Drop it. The advantage of CTS to self is that it slightly reduces the cost of the protection, but make the protection less reliable. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-25Merge branch 'master' of ↵John W. Linville17-146/+331
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-06-25mac80211: split sched scan IEsDavid Spinadel3-11/+20
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel1-1/+2
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-24iwlwifi: mvm: Fix broadcast filteringIlan Peer1-6/+6
Current code did not allow sending the broadcast filtering command for P2P Client interfaces. However, this was not enough, since once broadcast filtering command was issued over the station interface after the P2P Client connected, the command also attached the filters to the P2P Client MAC which is not allowed (FW ASSERT 1063). Fix this skipping P2P Client interfaces when constructing the broadcast filtering command Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24Revert "iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag"Arik Nemtsov1-0/+7
This reverts commit dc9a19296a872644f19a06d8eeb5db222d327b41. 3610 cards don't support UAPSD. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: handle device start failures during restartJohannes Berg1-0/+10
If the device fails during a restart, mac80211 now handles the situation better but we still have a little bit of cleanup to do in the driver - add the required code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwivi: mvm: BT Coex - properly set the priority of beaconsEmmanuel Grumbach1-6/+7
Since the new API allows multiple priorities, we need to properly set the beacon's prorities in the TX cmd associated to it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: support extended beacon notificationDavid Spinadel4-10/+40
Use extended beacon notification when supported by FW. Set last beacon system time to AP or GO interface. System time of last beacon can be used to avoid TBTT overlapping between two interfaces, CSA and other uses. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: Introduce an API to set STA_FLG_DISABLE_TX flagAndrei Otcheretianski3-5/+24
Introduce new station flag STA_FLG_DISABLE_TX, which is modified with ADD_STA command. This flag, when set, disables tx to the STA. Provide an API (iwl_mvm_sta_modify_disable_tx) to modify this flag, which should be used in channel switch and immediate quiet flows. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: disable beacon filtering escape timer in d0i3Eliad Peller1-1/+1
The beacon filtering configuration in d0i3 currently uses the max value defined as 1024. However, with beacon interval of 100ms we end up with too-frequent wakeups. Instead, configure the escape timer to 0, asking the fw to disable it altogether. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - avoid the shared antenna for management framesEmmanuel Grumbach3-1/+13
If BT is active, we need to refrain from using the shared antenna. This logic is done in the firmware when we use the link quality tables. But for management frames, the rate is written in the Tx command by the driver. Hence the driver needs to make sure not use the shared antenna when BT is active for any frames that don't use the rate scale table such as management frames or multicast. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - add reduced Tx power thresholds to constantsEmmanuel Grumbach2-6/+6
This really belongs to the constants file. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - don't limit rate control if TTC is onEmmanuel Grumbach2-1/+9
When the firmware enables TxTxCorunning, we can lift the constaints on the rate control. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow MIMO in more casesEmmanuel Grumbach1-7/+10
We can Tx in MIMO rates when we are in TxTx Disallow mode just like we can when we are in Tight mode. Same if we are in 5Ghz regardless of the mode we are. Change the code to allow MIMO in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow to force the antenna allocationEmmanuel Grumbach4-0/+94
This can be used for testing. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: assure no overflows occur while reading otpLiad Kaufman1-2/+12
Just in case sizes change in the OTP without proper SW updating, an additional check is inserted when reading OTP sections to assure no overflows occur. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: nvm: update maximal parsed values in external nvmLiad Kaufman1-2/+13
Some of the maximum values of the parsed external NVM file in the B-step of the 8000 HW family were updated, so this updates these values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: rename iwl_mvm_fw_error_next_dataEmmanuel Grumbach1-3/+3
This is not related to mvm. Rename to iwl_fw_error_next_data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: add device / firmware to fw-error-dump fileEmmanuel Grumbach1-3/+21
This can be useful later for parsing since the parsing may differ based on the device's family / bus. Also add the human readable version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: don't use hardcoded num of scan channelsDavid Spinadel4-51/+45
Use num of scan channels as advertised by fw TLV. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach1-46/+19
2014-06-24iwlwifi: mvm: add back support for low-priority scanJohannes Berg2-3/+7
The low-priority scan feature can be useful, e.g. for OBSS scans (if those are required by the AP); add back support for it, restoring the maximum out time to the value it was for low-priority scan before that was removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: use ksize to memset scan_commandDavid Spinadel1-3/+1
Use ksize to get scan command size instead of calculating it, to avoid nasty bugs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: rework sched scan channel configurationEliad Peller1-46/+19
The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: remove vif argument from power_update_macArik Nemtsov6-17/+17
The power update function looks at all current vifs to determine the power policy. It doesn't use the current vif. Instead the value was overwritten and used internally. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: make iwl_mvm_update_beacon_abort staticEmmanuel Grumbach2-53/+52
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: remove debugfs hook for reduced tx powerEmmanuel Grumbach4-47/+5
This was not used is unlikely to be used, just kill it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: disable reduced Tx power when not applicableEmmanuel Grumbach1-1/+5
I forgot to disable the reduced Tx power in a few paths. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: pass force_assoc_off all the way down to avoid hacksLuciano Coelho4-16/+18
In some cases, we need to force the association to be off in the MAC_CONTEXT_CMD command we send to the firmware. Instead of having to hack the vif->bss_conf.assoc value, pass it all the way down the call chain. Additionally, for the iwl_mvm_mac_ctxt_add() case, we *always* set forced_assoc_off to true, so we can remove the hack in the d3 code that was forcing it to off by hacking the bss_conf.assoc value. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: don't filter out the first beaconAvri Altman3-52/+27
Enabling beacon filtering should be done only after a beacon has been received. Doing that too early will cause disconnections. This has already been fixed, but the fix didn't take care about the case where the beacon is received after the association, it waited only for association which is not enough. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 02:55:05 +0300