summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2014-12-28iwlwifi: mvm: consider d0i3_disable in iwl_mvm_is_d0i3_supported()Eliad Peller1-0/+1
Consider the iwlwifi module param d0i3_disable when considering whether d0i3 is supported. (There is currently no need to differentiate between supported and enabled, so keep the function as-is) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support IWL_D0I3_MODE_ON_SUSPEND d0i3 modeEliad Peller4-2/+52
Enter d0i3 on suspend, and exit d0i3. Wait for the command responses in both cases. Use this mode in case of pcie trans. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: support multiple d0i3 modesEliad Peller1-0/+1
Allow configuring additional d0i3 mode, in which the fw will be configured to enter d0i3 only on suspend (while keeping the wake_lock accounting as usual) The d0i3 mode to use will be determined by the underlying trans layer. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: allow both d0i3 and d3 wowlan configuration modesEliad Peller2-8/+13
d3 and d0i3 shouldn't be mutually exclusive. Set supported wowlan triggers by looking for each of them, and check on suspend/resume which flow should be used ("any" trigger is supported by d0i3, and all the others by d3) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: convert the SRAM dump to the generic memory dumpEmmanuel Grumbach1-8/+9
This allows to add the offset. The type of the generic memory dump will let the parser know that this is SRAM. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: change SMEM dump to general purpose memory dumpEmmanuel Grumbach1-4/+10
Instead of adding a dump type for each type of memory, change the SMEM type to be a general purpose memory dump. Add the type of the memory and its offset in the device in the dump itself. This will allow an external parser to know where this memory came from. Note that since this type isn't really in use yet, this is not a real problem. Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add smem content to dump dataLiad Kaufman1-0/+19
In NICs that have SMEM - add its content to the dump data for later debug. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support additional nvm_file in family 8000 B stepEran Harary2-3/+9
nvm_file in family 8000 B step and A step differ. This means that the driver should support 2 file name as default. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: rs: fix max rate allowed if no rate is allowedEyal Shapira1-7/+18
In case the rate mask for one of the modulations was zero the max rate idx for that modulation was set to 32 (BITS_PER_LONG). This is bad as it would later lead to an out of bounds access to the expected tpt table. In most cases there was no real effect as the expected tpt was set to 0 and this led to avoiding the modulation effectively. Fix the out of bounds access and explicitly skip the modulation in case there's no rate allowed in it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: clear tt values when entering CT-killLuciano Coelho1-1/+6
Clear the thermal throttling values when entering CT-kill, since everything will be reinitialized anyway when we exit CT-kill. Additionally, clear the dynamic_smps value in the initialization funciton, for consistency. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Set the HW step in the core dumpIdo Yariv1-0/+1
The HW step member was left out of the core dump information. Fix this. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: allow RSSI compensationEmmanuel Grumbach1-0/+2
The firmware is able to compensate the rssi when we hear the frame on a different channel. This is true for an offset up to 3 channels. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add debugfs to trigger fw debug logs collectionEmmanuel Grumbach3-2/+78
This allows to collect the logs even if the firmware hasn't crashed. Of course, crashing the firmware is an option, but this is easier and nicer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support LnP 1x1 antenna configurationMoshe Harel10-31/+59
The antenna configuration has to be read also from OTP Currently read only from FW image Guideline: An antenna exists only if appears both in FW image & NVM Signed-off-by: Moshe Harel <moshe.harel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add fw runtime stack to dump dataLiad Kaufman1-4/+11
The allocation of the DCCM between the data and the stack can theoretically change without notice to the driver, but the total size is HW-fixed. Since the stack CCM (runtime stack) has also data important to the FW - this patch allows pulling the whole DCCM in one piece and adds it to the dump data. If the size isn't known - just use the data part of the DCCM as it appears in the FW TLVs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: remove MODULE_VERSIONJohannes Berg1-7/+0
The module version "in-tree:" or "in-tree:d" is useless; there should be better (functional) ways to detect whether debugging is enabled and other than that the version says nothing. Therefore remove the driver version completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-15mac80211: move U-APSD enablement to vif flagsJohannes Berg1-7/+6
In order to let drivers have more dynamic U-APSD support, move the enablement flag to the virtual interface driver flags. This lets drivers not only set it up differently for different interfaces, but also enable/disable on the fly if needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-14iwlwifi: mvm: clear IN_HW_RESTART flag on stop()Eliad Peller1-2/+13
On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: Ability to work with packed usniffer imageEran Harary1-1/+6
The new ucode package format holds also the usniffer images (in addition to the operational images and the TLVs). The driver can load the usniffer image if debug configuration tells it to. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: pcie: config regs according to fw tlvLiad Kaufman1-0/+4
Sometimes there is a need to configure some registers for setting some FW properties, such as the FW monitor mode (internal/external). This patch supports setting this for PCIe mode. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: send dbg config hcmds to fw if set in tlvLiad Kaufman2-0/+40
Send all debug-configuration HCMDs that are set in the TLVs to the FW. This may include HCMDs to configure the FW monitor and FW log level, for example. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: update values for Smart FifoEmmanuel Grumbach1-1/+1
Interoperability issues were identified and root caused to the Smart Fifo watermarks. These issues arose with NetGear R7000. Fix this. Cc: <stable@vger.kernel.org> [3.14+] Fixes: 1f3b0ff8ecce ("iwlwifi: mvm: Add Smart FIFO support") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove a dangling line of documentationDavid Spinadel1-1/+0
Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: support NVM file with headerIdan Kahlon1-8/+23
Handle NVM file header. When NVM header detected, skip the header and reading only the sections data. Signed-off-by: Idan Kahlon <idanx.kahlon@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add channel information to the netdetect notificationsLuciano Coelho2-11/+54
Add the channels on which there was a match for every match reported by the firmware. The firmware reports the channels as indices to the array of channels that was passed in the scheduled scan request, so we need to save the array when entering D3 to make sure it is available when we resume. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add SSID match information for net-detectLuciano Coelho2-5/+68
Add SSID information to the net-detect indication to userspace. Fetch the matched profiles from the firmware in order to find the correct SSIDs in the profiles that matched. Since the net-detect information is stored in cfg80211, and in theory it could change while we are waking up and reading the matched profiles, we need to save it when we enter D3 so it is available during resume. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add missing mvm ref debug printEliad Peller1-0/+1
IWL_MVM_REF_PROTECT_CSA is missing from the ref strings used by debugfs. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: BT Coex - change the MPLUT registers' valueEmmanuel Grumbach1-2/+2
This impacts the partition between BT and Wifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_API_CSA_FLOWEmmanuel Grumbach1-2/+1
All the supported firmwares have this TLV flag set. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_API_WOWLAN_CONFIG_TIDEmmanuel Grumbach5-51/+34
All the supported firmwares have this TLV flag set. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_CAPA_EXTENDED_BEACONEmmanuel Grumbach1-14/+5
This TLV flag is set for all the supported firmwares. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: deprecate -8.ucode for 3160 / 7260 / 7265Emmanuel Grumbach1-1/+0
This firmware is not supported anymore. Stop loading this firmware - and remove the code that handled older versions. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: check and report if wake up was due to net detectLuciano Coelho4-12/+94
Query the firmware for scan offload matches when waking up in order to report net detect as the reason for the wake up. This requires a new command API to be implemented. Additionally, remove some net detect command entries that are not valid anymore. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-25Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach1-3/+9
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw.h
2014-11-24iwlwifi: mvm: disconnect TDLS peers before channel switchArik Nemtsov1-0/+3
In case of channel switch, we need to teardown the TDLS peers. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: declare support for VHT BF info in radiotapEyal Shapira1-1/+2
The driver knows whether an rx frame was beamformed and marks it in the radiotap VHT flags. However it should also declare that it knows to extract this info otherwise this gets discarded by sniffers like Wireshark. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: add support to MFUART loading notificationChaya Rachel Ivgy4-0/+36
Add support to MFUART loading notification (print notification data with IWL_DEBUG_INFO) Signed-off-by: Chaya Rachel Ivgy <chaya.rachel.ivgi@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: call iwl_trans_suspend/resumeEliad Peller1-0/+3
call the appropriate iwl_trans_suspend/resume ops on iwl_mvm_suspend/resume calls. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: treat netdetect wake up separatelyLuciano Coelho2-3/+38
When the device wakes up due to netdetect, we need to query different things from the firmware than when it wakes up with a normal WoWLAN. To make this easier, separate the netdetect wake up handling from the rest. For now, we don't send netdetect as a wake up reason, treating it as a non-wireless wake up. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: refactor iwl_mvm_query_wakeup_reasons()Luciano Coelho1-26/+47
Refactor the iwl_mvm_query_wakeup_reasons() function to split the part that gets the firmware status from the part that sets up the WoWLAN status. This will allow netdetect to reuse the code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: refactor wowlan and netdetect configuration when suspendingLuciano Coelho1-22/+45
We need to send a WOWLAN_CONFIGURATION command also for netdetect and configure the rfkill release trigger if needed. To do so, refactor the code that configures wowlan and netdetect when suspending and send the WOWLAN_CONFIGURATION command also for net_detect. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: add support for net detectLuciano Coelho2-4/+8
Add the net detect WoWLAN flag to indicate support and use the nd_config from the WoWLAN configuration to start net detect, if it is set. The WoWLAN configuration takes precedence over the debugfs configuration. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: mvm: protect session during CSALuciano Coelho2-0/+22
When another vif is also running during a channel switch, we need to use a session protection when we move to the new channel, so that we don't miss the beacons. Without this, sometimes the other vif repeatedly gets time exactly when we should be hearing the beacons, preventing channel switch from completing. Adding a session protection that lasts from the moment the channel changes until 2 TBTTs later, ensures that we will hear the beacons on the destination channel. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: clear TE data if CSA time event fails to startLuciano Coelho1-0/+1
If setting the CSA time event fails, we must clear the TE data, otherwise we'll try to remove it when, for instance, a disconnection occurs, causing a SYSASSERT. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: disable beacon filtering during CSALuciano Coelho1-0/+10
After a channel switch, transmission on the new channel is only started once we see a beacon on it. Thus, beacon filtering needs to be disabled during channel switch so that mac80211 receives this beacon and finishes the process. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: add a channel_switch op to bypass mac80211 timerLuciano Coelho2-0/+16
We need to call ieee80211_chswitch_done() ourselves just when the absence TE started, so we perform the actual context switch early enough. To do so, add a dummy channel_switch op, which will cause mac80211 to skip the countdown timer and allow us to call ieee80211_chswitch_done() to complete the operation. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: finalize on post_switch instead of unassignLuciano Coelho1-12/+19
Now that mac80211 waits for the first beacon on the new channel before calling post_channel_switch, the reconfiguration of the firmware should be done in the post_channel_switch operation instead of when assigning the vif to the new context. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: schedule CSA time event a bit before beacon 1Luciano Coelho2-8/+17
Instead of using a hardcoded number of TUs before beacon 0 as the time to start the absence and actual channel switch, calculate it in relation to the beacon interval. We use 10 TUs + beacon interval before beacon 0 to target a bit before beacon 1. This gives us enough time to switch to the new channel before the AP/GO switches. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: add CSA absent time event for clientsLuciano Coelho5-18/+81
Add an absent time event when pre_channel_switch is called and use the time event started indication to set the disable_tx bit instead of doing it in unassign_vif(). This is done so that the firmware queues are stopped before the actual switch takes place to avoid losing packets while the AP/GO is performing its actual switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2014-11-24iwlwifi: mvm: use switching_chanctx argument instead of csa_activeLuciano Coelho1-4/+4
Now that all CSA flows are using the switch_vif_chanctx op, we can rely on the switching_chanctx boolean that is passed to the __iwl_mvm_assign_vif_chanctx() and __iwl_mvm_unassign_vif_chanctx() functions to decide whether the context switch flows need to be executed. In this way we make the chanctx switch flow more generic, without having to rely on the csa_active flag being set. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 13:17:45 +0300