summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/mvm
AgeCommit message (Collapse)AuthorFilesLines
2015-01-22iwlwifi: mvm: really disable TDLS queuesEmmanuel Grumbach1-2/+2
for_each_set_bit expect the size in number of bits and not in bytes. Fixes: a0f6bf2a5b01 ("iwlwifi: mvm: use private TFD queues for TDLS stations") Reviewed-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: Do not consider invalid HW queues in queue maskIlan Peer1-2/+4
The iwl_mvm_mac_get_queues_mask() added vif->hw_queue[ac] to the queue mask although it might be set to IEEE80211_INVAL_HW_QUEUE. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: BT Coex - set all the co-running values to 0Emmanuel Grumbach2-16/+16
With this value, we de-facto disable the feature. Since it is not working yet, disable it completely. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: support family 8000 C stepEran Harary1-1/+1
C step functionality in the driver is exactly the same as B step besides the ucode name that present as iwlwifi-8000C-xx.ucode instead of iwlwifi-8000B-xx.ucode Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: document switch case fall-through in iwl_mvm_send_sta_keyJohn W. Linville1-0/+1
Add a comment indicating that the WLAN_CIPHER_SUITE_WEP104 case falls through to the WLAN_CIPHER_SUITE_WEP40 case in iwl_mvm_send_sta_key. This will document that the lack of a break is intentional. Coverity: CID 1260023 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: use STBC regardless of power save modeEyal Shapira1-8/+0
Tx STBC was used only when in CAM mode or if powersave is disabled. Effectively this meant we never used STBC as these modes aren't used on most platforms by default. Change that. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Revert "iwlwifi: mvm: drop non VO frames when flushing"Emmanuel Grumbach1-9/+11
This is now implemented by mac80211 (commit below). mac80211 will flush/drop the frames on the queues before suspending / disconnecting. It will then send the deauth and wait until the queues are empty. commit 3b24f4c65386dc0f2efb41027bc6e410ea2c0049 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Wed Jan 7 15:42:39 2015 +0200 mac80211: let flush() drop packets when possible This reverts commit 4e6c48e0984e28d064ee8fbc292aee7b7920c507.
2015-01-22iwlwifi: mvm: add support for new LTR commandEmmanuel Grumbach2-9/+49
This new command will give finer granularity to configure the platform. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: BT Coex - fine tune the MPLUT registerEmmanuel Grumbach1-1/+1
This allow to better preserve the BT performance while WiFi is running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach5-34/+86
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw-file.h drivers/net/wireless/iwlwifi/mvm/scan.c
2015-01-22iwlwifi: mvm: move U-APSD decision to authenticationJohannes Berg1-4/+15
In order to change the usage of U-APSD on the fly later, move the enabling condition into a new function that is called when authenticated. This allows the module parameter to become writable, it won't take effect immediately but at least on the next association the new value will be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge tag 'tags/mac80211-next-for-davem-2015-01-19' into iwlwifi-nextEmmanuel Grumbach1-7/+6
Some further updates for net-next: * fix network-manager which was broken by the previous changes * fix delete-station events, which were broken by me making the genlmsg_end() mistake * fix a timer left running during suspend in some race conditions that would cause an annoying (but harmless) warning * (less important, but in the tree already) remove 80+80 MHz rate reporting since the spec doesn't distinguish it from 160 MHz; as the bitrate they're both 160 MHz bandwidth
2015-01-22iwlwifi: mvm: ignore temperature updates in the RX statistics notificationLuciano Coelho1-1/+5
If the firmware sends spontaneous DTS notfications with the temperature (indicated in a TLV), we can ignore the temperature we get in the RX statistics notifications. This prevents potentially handling the same temperature change twice. It also ignores notifications with temperature equal to 0 that happens from time to time. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: cleanup unuseful and overflowing tracesEyal Shapira1-3/+1
These aren't useful and overflowing so drop them and also fix a minor typo. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: generate statistics debugfs codeJohannes Berg2-86/+78
There's no need to duplicate the structure field name in the string, just generate the string in the macro that's there anyway. To keep the debugfs output the same, rename one (otherwise unused) field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: move statistics API to new header fileJohannes Berg2-208/+278
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: sync statistics firmware APIJohannes Berg2-37/+37
The firmware API structs are split differently, synchronize the struct splits with the current firmware definitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add rxf and txf to dump dataLiad Kaufman5-27/+265
When the FW is in error status - try to read the RXF and TXF (all of them) and add them to the dump data. This shouldn't happen in non-error statuses, as we don't want to stop the RXF/TXF while they are running. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add support for dumping a secondary SRAMIdo Yariv1-4/+24
Some HW modules have two SRAMs. In such cases add the secondary SRAM to the list of dumped segments. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add debugfs file for misbehaving U-APSD APJohannes Berg1-0/+31
As this functionality relies on getting a firmware notification it is difficult to test. Allow accessing the data for it from debugfs to be able to trigger all kinds of scenarios to test. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: let the firmware configure the schedulerEmmanuel Grumbach7-103/+84
A new host command can be used to configure the scheduler instead of accessing the scheduler's registers from the driver. This is easier and less error prone since accessing the hardware at certain moments can lead to races with the firmware. Prefer to use the host command whenever it is available. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: scan dwell time correctionsDavid Spinadel1-5/+12
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add print of he nvm versionEran Harary1-0/+2
Print the nvm version in the log for debugging purposes. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: set max_out_time equal to frag_passive_dwell in fragmented scanHaim Dreyfuss1-2/+2
Fragmented scan should be applied for all channels, passive and active. When scanning on passive channels the firmware uses frag_passive_dwell to define the maximum continuous scan time before returning to the operating channel. On active channels max_out_time is the parameter used by the firmware to define the maximum time allowed out of the operating channel. Since active channels' scan should also be fragmented set max_out_time equal to frag_passive_dwell. In addition: - Set max_out_time and suspend_time if the firmware doesn't support fragmented scan to avoid unexpected behavior. - Adjust max_out_time for second level of scan precedence. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: allow to disable MIMO for P2P onlyEmmanuel Grumbach2-2/+2
This is to work around interoperability bugs with devices that don't hanle MIMO properly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: allow to collect debug data from non-sleepable contextEmmanuel Grumbach2-7/+7
iwl_mvm_fw_dbg_collect allows to collect debug data from the firmware. Most of the firmware interaction is done in non-sleepable context. It makes little sense to force the caller of iwl_mvm_fw_dbg_collect to sleep. Defer the actual collection to a worker so that this function will be able to be called from any context. Reviewed-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when stopping fw monitorLiad Kaufman1-2/+7
In case platform is in d0i3 - make sure it is awake when writing the registers to stop the monitor when collecting FW debug data. Plus, remove unneeded mutex locking currently done. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: Add debugfs entry to enable scan offload notificationAlexander Bondar4-0/+48
This option enables scan offload iteration complete notification from firmware which includes the last iteration's status and the scanned channels from the current iteration. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when collecting fw dbgLiad Kaufman3-0/+7
This makes sure that we're not trying to read/write any of the FW debug data collected during d0i3. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: repeat initial legacy rates in LQ tableEyal Shapira2-11/+13
Repeating the legacy rates avoids degrading quickly to lower rates due to collisions which is common when doing TCP Tx traffic in legacy. This slightly improves TCP Tx throughput while working in legacy in different scenarios. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: don't indicate no BA if STA was in powersaveEyal Shapira1-1/+2
If Tx failed because the STA was in powersave there's no point in sending a BAR so avoid indicating AMPDU_NO_BACK to mac80211. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-20iwlwifi: mvm: validate tid and sta_id in ba_notifEyal Shapira1-0/+5
These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. CC: <stable@vger.kernel.org> [3.10+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-18iwlwifi: mvm: abort scheduled scan upon RFKILLEmmanuel Grumbach1-0/+7
When we have an active scheduled scan, and the RFKILL interrupt kicks in, the stack will cancel the scheduled scan as part of the down flow. But cancelling scheduled scan usually implies sending a command to the firwmare which has been killed as part of the RFKILL interrupt handling. Because of that, we returned an error to mac80211 when it asked to stop the scheduled scan and didn't notify the end of the scheduled scan. Besides a fat warning, this led to a situation in which cfg80211 would refuse any new scan request. To disentangle this, fake that the scheduled scan has been stopped without sending the command to the firwmare, return 0 after having properly let cfg80211 know that the scan has been cancelled. This is basically the same as: commit 9b520d84957d63348e87c0f2cbd21d86e1e8f2f2 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Nov 4 15:54:11 2014 +0200 iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. but for the scheduled scan case. Link: http://permalink.gmane.org/gmane.linux.kernel.wireless.general/133232 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-13iwlwifi: mvm: set the tx cmd tid for BAR frame correctlyEyal Shapira1-2/+9
BAR tx cmd tid was set to non qos (8). This is wrong as BAR should be sent with the tid of the BA session. This led to a corruption in the firmware. The visible effect of this from the driver side is the BA notification that comes back after the BAR. It was botched and led to the WARNING below. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 17707 at /home/tester/workspace_hostap/iwlwifi/drivers/net/wireless/iwlwifi/mvm/tx.c:976 iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm]() Q 4500, tid 8, flow 65535 Modules linked in: iwlmvm(O) mac80211(O) iwlwifi(O) cfg80211(O) compat(O) netconsole configfs ctr ccm arc4 autofs4 microcode bnep rfcomm snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel joydev snd_hda_codec uvcvideo videobuf2_core snd_hwdep videodev snd_pcm videobuf2_vmalloc videobuf2_memops i915 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device drm_kms_helper dell_wmi dell_laptop drm btusb bluetooth snd psmouse i2c_algo_bit sparse_keymap wmi soundcore 6lowpan_iphc dcdbas serio_raw video lpc_ich ppdev mac_hid parport_pc nfsd nfs_acl auth_rpcgss nfs fscache binfmt_misc lockd sunrpc lp parport msdos sdhci_pci sdhci mmc_core ahci libahci e1000e ptp pps_core [last unloaded: compat] CPU: 2 PID: 17707 Comm: irq/46-iwlwifi Tainted: G W O 3.14.17-patched #4 Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 00000000 00000000 ebd49d6c c1616221 f985dbdc ebd49d9c c1044e44 f9861df4 ebd49dc8 0000452b f985dbdc 000003d0 f98395da f98395da ebd49f10 eaf3d8a4 0000ffff ebd49db4 c1044f03 00000009 ebd49dac f9861df4 ebd49dc8 ebd49e64 Call Trace: [<c1616221>] dump_stack+0x41/0x52 [<c1044e44>] warn_slowpath_common+0x84/0xa0 [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<f98395da>] ? iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c1044f03>] warn_slowpath_fmt+0x33/0x40 [<f98395da>] iwl_mvm_rx_ba_notif+0x4ba/0x4d0 [iwlmvm] [<c10e3952>] ? ring_buffer_unlock_commit+0xa2/0xd0 [<c10e9767>] ? trace_buffer_unlock_commit+0x37/0x50 [<f98568a3>] ? iwl_tm_mvm_send_rx+0x53/0x90 [iwlmvm] [<f98327a8>] iwl_mvm_rx_dispatch+0x108/0x130 [iwlmvm] [<f9eac7e7>] iwl_pcie_irq_handler+0xf17/0x15b0 [iwlwifi] [<c10994c1>] irq_thread_fn+0x21/0x50 [<c109926c>] irq_thread+0xec/0x110 [<c10994a0>] ? irq_thread_dtor+0xb0/0xb0 [<c10993f0>] ? irq_finalize_oneshot.part.34+0xc0/0xc0 [<c1099180>] ? wake_threads_waitq+0x40/0x40 [<c1062fdb>] kthread+0x9b/0xb0 [<c1627137>] ret_from_kernel_thread+0x1b/0x28 [<c1062f40>] ? flush_kthread_worker+0x90/0x90 ---[ end trace 5e0f67374816db17 ]--- Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-12iwlwifi: mvm: drop non VO frames when flushingEmmanuel Grumbach1-11/+9
This change has already been implemented in iwldvm: commit a260e7b3f0307878b99d57ed1406cf2d497923b8 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Sun Oct 5 09:11:14 2014 +0300 iwlwifi: dvm: drop non VO frames when flushing Since I added the flush() callback implementation in mvm, we got reports that the queues are stuck while roaming or suspending. This commit above helped much for iwldvm, implement the same behavior for iwlmvm. CC: <stable@vger.kernel.org> [3.16+] Fixes: c5b0e7c0565a ("iwlwifi: mvm: implement mac80211's flush callback") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-12iwlwifi: mvm: fix EBS on single scanDavid Spinadel2-14/+39
EBS error detection isn't supported by all FWs, so turn it on only if the FW advertises such support. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: scan dwell time correctionsDavid Spinadel1-5/+12
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: add a flag to enable match found notificationDavid Spinadel2-0/+4
Add a flag that enables match found notification to align with FW API change. Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix out of bounds access to tid_to_mac80211_acEyal Shapira1-2/+6
When tid_tspec was set to IWL_TID_NON_QOS (8) this led to an out of bounds access to the tid_to_mac80211_ac array whose size is 7. Fix this. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: mvm: fix Rx with both chainsEyal Shapira1-1/+1
commit 5c90422439d6 "iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it" broke Rx with 2 chains for diversity. This had an impact on throughput where we're using only a single stream (11a/b/g APs, single stream APs, static SMPS). Fixes: 5c90422439d6 ("iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid it") Cc: Stable <stable@vger.kernel.org> [3.16+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: rs: organize and cleanup constsEyal Shapira3-97/+79
Organize and cleanup the consts used by rs. This is part of making some of these configurable. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Alter passive scan fragmentation parameters in case of multi-MACHaim Dreyfuss1-6/+10
Make passive scan fragmentation depends on the number of active interfaces. In case of single-MAC, make passive scan less fragmented. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: Configure EBS scan ratioHaim Dreyfuss2-2/+11
This configuration defines the ratio between number of scan iterations where EBS is involved to those where it is not. This configuration was left unconfigured due to inaccurate documentation. Fix documentation as well. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: ask the fw to wakeup (from d0i3) on sysassertEliad Peller1-0/+1
Set the wakeup flag (of the d3 command) to configure the fw to wakeup when sysassert happens while in d0i3. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: tlv: add support for IWL_UCODE_TLV_SDIO_ADMA_ADDR TLVLiad Kaufman1-0/+2
A new TLV supplies the ADMA address for SDIO mode, allowing the driver to configure the default base address to be this (as given in the FW), rather than hardcoding the values to use until the FW sends the ALIVE message. Use the value given by the FW in the IWL_UCODE_TLV_SDIO_ADMA_ADDR TLV for setting the default SDTM base address until the FW sends the ALIVE message. If it isn't given in the FW - use the current hardcoded values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_sta_from_mac80211() consistentlyJohannes Berg6-20/+17
A number of places (still) use a direct operation, use iwl_mvm_sta_from_mac80211() consistently. In one place also move it into the variable initializer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: use iwl_mvm_vif_from_mac80211() consistentlyJohannes Berg3-6/+6
There are a few places not using it, use it at those places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: clean refs before stop_device()Eliad Peller1-4/+5
Some implementations (i.e. mini_rpm) assume the references are managed only while the device is started. Move the stale reference cleanup before stopping the device in order to make them happy. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support 2 different channelsEmmanuel Grumbach1-1/+1
The driver and the firmware now support 2 different channels at the same time. Advertise this capability to the stack. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: wait for d0i3 exit on hw restartEliad Peller1-0/+13
On hw restart, make sure to wait for d0i3 exit (by checking the IN_D0I3 status bit). This is needed in order to avoid the stale d0i3_exit_work from doing harm (e.g. unref cleared reference). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 10:55:53 +0300