summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211
AgeCommit message (Collapse)AuthorFilesLines
2012-09-28brcmfmac: get rid of extern keyword in wl_cfg80211.hArend van Spriel1-8/+8
The function declarations in wl_cfg80211.h used the extern keyword but it is redundant as that is implicit so they were removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: notify common driver about usb tx completion.Hante Meuleman1-0/+2
brcmf_usb_tx_complete now calls brcmf_txcomplete to correct eapol counter. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use define instead of hardcoded values.Hante Meuleman1-4/+6
brcmf_parse_tlvs was using hardcoded values. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use different fw api for encryption,auth. configHante Meuleman4-97/+219
This patch changes the commands being used to configure encryption and authentication. These new methods are needed for when p2p and hostap support are added. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use wait_event_timeout for fw control packets over usb.Hante Meuleman1-37/+9
firmware control packets over usb are async acked. This is awaited for by using interruptible wait. This can be interrupted by signal which results in undesirable behavior. Instead wait_event_timeout is used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28brcmfmac: use kcalloc() to prevent integer overflowDan Carpenter1-2/+2
The multiplication here looks like it could overflow. I've changed it to use kcalloc() to prevent that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: get rid of void pointer in struct brcmf_cfg80211_privArend van Spriel2-4/+4
Field 'pub' in struct brcmf_cfg80211_priv was types as void pointer and filled with parameter passed in brcmf_cfg80211_attach(). This patch makes the type specific, ie. struct brcmf_pub. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: change struct brcmf_cfg80211_priv comments to kernel-docArend van Spriel1-41/+77
Small step to fix structure commenting using kernel-doc syntax. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: clear control lock on usb error.Hante Meuleman1-0/+2
On a usb error the lock bit should be cleared. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmsmac: don't start device when RfKill is engagedPiotr Haber1-1/+4
This patch fixes a bug when device is being started while RfKill switch is engaged, leading to hang due to partial initialization of hardware. Tested-by: <dragonn@op.pl> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: remove unused usb bmac model code.Hante Meuleman1-15/+3
clean up code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: fix bug in determining phy bands.Hante Meuleman1-1/+1
This patch fixes a bug in routine where phy bands are determined. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: remove unused function.Hante Meuleman1-17/+0
clean up code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: streamline SDIO read frame routineFranky Lin1-388/+233
SDIO read non-glomming frame routine handles first frame and follow up frame read separately. But they share a lot of common code. This patch abstracts a brcmf_sdio_hdparser function and optimize the code flow for better readability and future optimization. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: store usb fw images in local linked list.Hante Meuleman1-23/+41
For suspend/resume it is necessary to store firmware in memory. In order to support multiple usb dongles at the same time a linked list of firmwares was created. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: fix debug printout of event data.Hante Meuleman2-9/+6
Some events result in printing of the buffer when debug is enabled. This printing was not very efficient. Changed to macro so it comes out nice and clean without filling log buffer. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: introduce scheduled scan supportArend van Spriel2-1/+387
This change add support for NL80211 scheduled scan. This may be used to offload scanning to the device, which may give the host opportunity to sleep. The newer versions of wpa_supplicant have support for this functionality. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: extend brcmf_term_iscan() to abort e-scanArend van Spriel1-23/+21
With the introduction of E-Scan there are two scan mechanisms in the driver. I-Scan was aborted on suspend and bringing down the device using brcmf_term_iscan(). The function has been renamed to brcmf_abort_scanning() and covers e-scan abort as well. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: fix sparse warnings in e-scan related codeArend van Spriel1-17/+18
With the introduction of e-scan mechanism in brcmfmac (e756af5 brcmfmac: add e-scan support.) a couple of sparse warnings were introduced. This patch resolves those. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: simplify handling e-scan result firmware eventArend van Spriel1-10/+4
Upon handling an e-scan result event from the firmware in brcmf_cfg80211_escan_handler() the status may indicate e-scan is completed or aborted. If so brcmf_notify_escan_complete() is called. However, that function and brcmf_cfg80211_escan_handler() both log the same debug message and both enable MPC flag in the firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: add parameter check in brcmf_c_mkiovar()Arend van Spriel1-2/+4
This patch assures data is only appended in output buffer when data is not NULL and datalen is not zero. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: fix bug causing errorneous free on exception.Hante Meuleman1-4/+2
This patch fixes bug where driver frees resources twice when an exception occurs. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: clear status for in-band interrupt in brcmf_sdbrcm_isrFranky Lin3-33/+68
SDIO in-band interrupt is level sensitive according to SDIO standard. When the register interrupt handler gets called by SDIO stack it is running in non interrupt context and expected to clear the interrupt from the dongle. Therefore in-band and out-of-band interrupt need to be handled differently. Cc: Wei Ni <wni@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Reported-by: Wei Ni <wni@nvidia.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: raise SDIO host lock to higher levelFranky Lin3-30/+36
Use SDIO host lock to protect the entire communication process of register access or data read/write rather than function calls to MMC/SDIO stack only. This can help to avoid unintentional memory access and unexpected interruption. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: streamline SDIO dpcFranky Lin1-20/+7
Streamline SDIO dpc by removing some unnecessary code path. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: convert SDIO dpc implementation to workqueueFranky Lin1-102/+83
Switch SDIO dpc implementation from kernel thread to workqueue for better performance and compatibility. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: use atomic variable for interrupt pending flagFranky Lin1-9/+9
Interrupt pending flag used in SDIO bus layer could be used in multiple processes in different context. Use atomic_t make sure every interrupt is handled. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: remove obsolete sdio bus sleep mechanismFranky Lin1-93/+0
Remove sdio bus sleep mechanism since it is never invoked. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24brcmfmac: absorb brcmf_sendpkt into brcmf_netdev_start_xmitFranky Lin2-29/+16
brcmf_sendpkt only called by brcmf_netdev_start_xmit now. Absorb it to increase readability. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: add e-scan support.Hante Meuleman5-2/+583
This patch adds e-scan support (currently i-scan is in use). E-scan is a more powerful and memory efficient method for scanning. E-scan will be the default scan method and eventually, i-scan support will be removed. The scan methods do not make any difference to the end-user. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: avoid using local usb data.Hante Meuleman1-80/+39
This patch removes usage of some of the local data in the usb host interface driver. This is a step in the preperation to support multiple USB devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: refill buffers on rx protocol error.Hante Meuleman1-4/+2
This patch fixes a bug where rx buffer does not get refilled if the packet received has an rx protocol error. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Clean up scan related code.Hante Meuleman1-13/+9
Clean up scan related code in preparation of a new scan mechanism (e-scan) which will follow in a separate patch. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Add tx flow control on net if queue for USB.Hante Meuleman1-25/+36
Enable tx flow control for USB host interface. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Add extra data support to firmware event queueing.Hante Meuleman2-3/+15
Firmware events can contain extra data. This patch adds support to copy this data when it exists. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Stop all net if queues on tx flow halt.Hante Meuleman3-11/+15
When tx flow is to be blocked due to host interface throttle then all net if queues should be stopped. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Fix big endian host configuration data.Hante Meuleman1-10/+16
Fixes big endian host configuration parameters. Cc: stable <stable@vger.kernel.org> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: fix big endian bug in i-scan.Hante Meuleman1-2/+4
ssid len is 32 bit and needs endian conversion for big endian systems. Cc: stable <stable@vger.kernel.org> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11brcm80211: Remove bogus memcpy in ai_detachAndi Kleen1-3/+0
gcc 4.8 warns for this memcpy. While the copy size is correct, the whole copy seems to be a nop because the destination is never used, and there's no need to use memcpy to copy pointers anyways. And the type of the pointer was wrong, but at least those are always the same. Just remove it. /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c: In function 'ai_detach': /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c:539:32: warning: argument to 'sizeof' in 'memcpy' call is the same pointer type 'struct si_pub **' as the destination; expected 'struct si_pub *' or an explicit length [-Wsizeof-pointer-memaccess] memcpy(&si_local, &sih, sizeof(struct si_pub **)); ^ Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10brcm80211: fix missing allocation failure checkColin Ian King1-0/+2
Check for oobirq_entry allocation failure to avoid NULL pointer dereferencing. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10brcmsmac: fix mismatch in number of custom regulatory rulesArend van Spriel1-1/+1
The driver provides the cfg80211 regulatory framework with a set of custom rules. However, there was a mismatch in number of rules and the actual rules provided. This resulted in setting an invalid power level: ieee80211 phy0: brcms_ops_config: change channel 13 ieee80211 phy0: brcms_ops_config: Error setting power_level (8758364) Closer look in cfg80211 regulatory blurb showed following bogus rule: cfg80211: 0 KHz - -60446948 KHz @ 875836468 KHz), (875836468 mBi, 875836468 mBm) Cc: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07Merge branch 'master' of ↵John W. Linville5-28/+30
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-09-07brcmfmac: add callback for nl80211 testmode commandArend van Spriel3-1/+33
This change adds callback for nl80211 testmode, which can be used for testing and debugging purposes with driver and firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07brcmfmac: Add 43143 USB support.Hante Meuleman1-0/+9
Added usb device id to list of supported devices. 43143 is a new 802.11n single stream device. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07brcmfmac: Add 43242 USB support.Hante Meuleman1-1/+19
Added usb device id to list of supported devices. 43242 is the new 802.11n 2x2 MIMO device. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07brcmfmac: add BCM43241 sdio interface driver supportFranky Lin4-0/+22
BCM43241 is an 11abg and 2x2 11n Wifi/BT/FM combo chip that supports 40MHz channel width. This patch intends to enable the driver support for the chip through SDIO bus interface. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07brcmfmac: prevent possible race condition on usb rx control.Hante Meuleman1-1/+1
brcmf_usb_tx_ctlpkt sends message using brcmf_usb_send_ctl then clears boolean and waits for boolean to be set (by another thread). This can result in situation where flag gets cleared while result was already received. First clearing the flag and then sending the data will prevent this. Reviewed-by: Arend Van Spriel (arend@broadcom.com) Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05brcmfmac: fix get rssi by clearing getvar struct.Hante Meuleman1-7/+8
The function brcmf_cfg80211_get_station requests the RSSI from the device. The complete structure used needs to be cleared before sending the request to firmware. Otherwise the request fails filling the logs with "Could not get rssi (-2)" messages. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05brcmfmac: fix race condition for rx and tx data.Hante Meuleman1-10/+11
On both rx and tx there is was a race condition on the queueing of usb requests. When for example frame gets submitted it is possible that complete function gets called even before usb_submit_urb() returns. As a result it is possible that usb requests get losts, which was noticed on OMAP4 pandaboard platform. This patch fixes the race condition. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05brcmfmac: dont use ZERO flag for usb INHante Meuleman1-1/+0
URB_ZERO_PACKET should only be set or bulk OUT and this condition is checked with a WARN_ON in usb_submit_urb(). This patch fixes brcmfmac to get rid of this warning filling the logs. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 22:56:37 +0300