summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211
AgeCommit message (Collapse)AuthorFilesLines
2012-12-11brcmsmac: add support for cores with revision 17Hauke Mehrtens2-3/+4
This adds support for bcma wifi core revision 17 which is found on BCM4716/4717/4718 SoCs. The firmware version 610.812 for brcmsmac found in linux-firmware does not support these cores, but a firmware generated with b43-fwcutter from the proprietary broadcom wireless driver works with these chips. This wifi core contains a revision 5 N-PHY and a revision 7 radio of type 0x2056. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: remove WL_CONN() macroArend van Spriel2-98/+94
Get rid of WL_CONN(...) macro in favor of brcmf_dbg(CONN,...) Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: remove WL_SCAN() macroArend van Spriel2-39/+39
Get rid of WL_SCAN(...) macro in favor of brcmf_dbg(SCAN,...) Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: remove WL_TRACE() macroArend van Spriel2-96/+95
Get rid of WL_TRACE(...) macro in favor of brcmf_dbg(TRACE,...) Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: replace WL_INFO() macroArend van Spriel2-22/+21
Get rid of WL_INFO() in favor of brcmf_dbg(INFO,...). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: replace WL_ERR() with brcmf_err()Arend van Spriel2-158/+158
Getting rid of wl_cfg80211 specific error log macro. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: consolidate debug macros in wl_cfg80211Arend van Spriel3-68/+10
The source file wl_cfg80211.c has its own debug macros and levels. This patch maps the macros to the ones used in the rest of the brcmfmac driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: error messages should not be suppressedArend van Spriel11-249/+248
The call to brcmf_dbg(ERROR, ...) only resulted in a log message when compiled with -DDEBUG. Error messages are valuable for resolving issues so this patch replaces it with brcmf_err(...) so they always end up in the log. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: use one list of event defintionsArend van Spriel2-134/+80
Currently, adding a new event requires modification in two source files. Use macro definition to have one place and have better maintainability. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmsmac: fix uninitialized variable warning on arm architectureArend van Spriel1-1/+1
Using gcc v4.7.2 gave following warning: CC [M] drivers/net/wireless/brcm80211/brcmsmac/aiutils.o brcmsmac/aiutils.c: In function 'ai_deviceremoved': brcmsmac/aiutils.c:733:9: error: 'w' may be used uninitialized in this function [-Werror=uninitialized] Inspection of the pci_read_config_dword() function showed it can return without modifying the output variable 'w' so this patch initializes it to 0. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11brcmfmac: rework bus interfaceArend van Spriel9-47/+111
Rework the bus interface between common driver part and bus-specific driver part. It prepares for adding tracing in bus-specific callback functions. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-07brcm80211: remove __dev* attributesBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: brcm80211-dev-list@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-06brcmsmac: remove duplicated include from debug.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-06brcmfmac: convert struct spinlock to spinlock_tLuis R. Rodriguez1-1/+1
spinlock_t should always be used. LD drivers/net/wireless/brcm80211/built-in.o CHECK drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.o CHECK drivers/net/wireless/brcm80211/brcmfmac/fwil.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/fwil.o CHECK drivers/net/wireless/brcm80211/brcmfmac/fweh.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/fweh.o CHECK drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.o CHECK drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/dhd_common.o CHECK drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.o CHECK drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o CHECK drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.o CHECK drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.o CHECK drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.o CHECK drivers/net/wireless/brcm80211/brcmfmac/usb.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/usb.o CHECK drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c CC [M] drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.o LD [M] drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.o LD drivers/net/wireless/brcm80211/brcmsmac/built-in.o CHECK drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c:1311:6: warning: context imbalance in 'brcms_down' - unexpected unlock drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c:1598:6: warning: context imbalance in 'brcms_rfkill_set_hw_state' - unexpected unlock CC [M] drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.o CHECK drivers/net/wireless/brcm80211/brcmsmac/ucode_loader.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/ucode_loader.o CHECK drivers/net/wireless/brcm80211/brcmsmac/ampdu.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/ampdu.o CHECK drivers/net/wireless/brcm80211/brcmsmac/antsel.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/antsel.o CHECK drivers/net/wireless/brcm80211/brcmsmac/channel.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/channel.o CHECK drivers/net/wireless/brcm80211/brcmsmac/main.c drivers/net/wireless/brcm80211/brcmsmac/main.c:6246:36: warning: Initializer entry defined twice drivers/net/wireless/brcm80211/brcmsmac/main.c:6246:43: also defined here CC [M] drivers/net/wireless/brcm80211/brcmsmac/main.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy_shim.o CHECK drivers/net/wireless/brcm80211/brcmsmac/pmu.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/pmu.o CHECK drivers/net/wireless/brcm80211/brcmsmac/rate.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/rate.o CHECK drivers/net/wireless/brcm80211/brcmsmac/stf.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/stf.o CHECK drivers/net/wireless/brcm80211/brcmsmac/aiutils.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/aiutils.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c:3313:46: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:17688:47: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:18187:53: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:21160:36: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:23321:35: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c:28343:44: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.o CHECK drivers/net/wireless/brcm80211/brcmsmac/phy/phy_qmath.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/phy/phy_qmath.o CHECK drivers/net/wireless/brcm80211/brcmsmac/dma.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/dma.o CHECK drivers/net/wireless/brcm80211/brcmsmac/brcms_trace_events.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/brcms_trace_events.o CHECK drivers/net/wireless/brcm80211/brcmsmac/debug.c CC [M] drivers/net/wireless/brcm80211/brcmsmac/debug.o LD [M] drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.o LD drivers/net/wireless/brcm80211/brcmutil/built-in.o CHECK drivers/net/wireless/brcm80211/brcmutil/utils.c CC [M] drivers/net/wireless/brcm80211/brcmutil/utils.o LD [M] drivers/net/wireless/brcm80211/brcmutil/brcmutil.o Building modules, stage 2. MODPOST 3 modules CC drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.mod.o LD [M] drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko CC drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.mod.o LD [M] drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko CC drivers/net/wireless/brcm80211/brcmutil/brcmutil.mod.o LD [M] drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: Fix possible NULL pointer dereference in _dma_ctrlflags()Seth Forshee1-3/+1
There's a debug message to warn if this function is passed a NULL pointer, but in order to print the message we have to dereference the pointer. Obviously this isn't a good idea, so remove the message. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmfmac: change debug output for received event.Hante Meuleman1-2/+2
see header. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmfmac: fix bug in setting mgmt ie and parsing vndrs ie.Hante Meuleman1-12/+16
Parsing vndrs ie was not taking len of tlv itself in account. Setting mgmt ie was missing check for length indicating non configured ie and wrongly checking available length. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmfmac: remove mode from struct brcmf_cfg80211_confArend van Spriel2-28/+20
The mode should be stored and used per virtual interface. Remove the mode from device global structure and rework the code to use the mode from brcmf_cfg80211_vif. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmfmac: get rid of struct brcmf_cfg80211_info::link_up attributeArend van Spriel2-48/+22
This attribute indicates successful IBSS or AP connection has been established. However, this no longer works for virtual interfaces. As it turns out this attribute is identical to the CONNECTED bit in struct brcmf_cfg80211_vif::sme_state. This patch removes the attribute and rework some functions relying on it. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: support 4313iPAPiotr Haber2-162/+271
Add support for 4313 iPA variant. It is a variant of already supported 4313 ePA and needs some PHY changes to work properly. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: move PHY functionsPiotr Haber1-50/+52
Move functions in preparation for 4313iPA changes Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: hardware info in debugfsPiotr Haber4-1/+144
Put basic information about hardware in debugfs. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: fix bounds checking in tx/rxPiotr Haber1-13/+17
brcms_b_txstatus and brcms_b_recv are off by one when doing bounds checking on number of packets to process Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: cleanup in isr codePiotr Haber3-24/+13
brcms_c_isr returns true if interrupt was for us and if dpc should be scheduled which is the same thing. Simplify it. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30brcmsmac: handle packet drop during transmit correctlyPiotr Haber3-8/+11
The .tx() callback function can drop packets when there is no space in the DMA fifo. Propagate that information to caller and make sure the freed sk_buff reference is not accessed. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-26brcmsmac: Add __printf verification to logging prototypesJoe Perches1-2/+8
Adding __printf helps spot format and argument mismatches. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-26Merge branch 'for-john' of ↵John W. Linville1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-26cfg80211: pass a channel definition structJohannes Berg1-5/+6
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-21Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-21brcmsmac: Remove stray argument from debug macroSeth Forshee1-1/+1
One of the debug macro invocations ended up with a stray 0 argument where the format string should be. Remove it. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21brcmsmac: Remove unused wlc_prio2prec_map and _BRCMS_PREC_* constantsSeth Forshee1-27/+0
Fixes sparse warning: drivers/net/wireless/brcm80211/brcmsmac/main.c:308:10: sparse: symbol 'wlc_prio2prec_map' was not declared. Should it be static? Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmfmac: include linux/vmalloc.h from usb.cJohn W. Linville1-0/+1
This avoids build failures on some architectures... Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com>
2012-11-20brcmfmac: check return from kzalloc in brcmf_fweh_process_eventJohn W. Linville1-0/+3
Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com>
2012-11-20brcmsmac: Remove some noisy and uninformative debug messagesSeth Forshee2-27/+0
These messages clutter up the trace buffer without adding any useful information. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add tracepoint for AMPDU session informationSeth Forshee2-0/+36
Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add tracepoint for macintstatusSeth Forshee2-4/+24
Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Improve tx trace and debug supportSeth Forshee4-250/+94
Add the brcmsmac_tx trace system for tx debugging. Existing code to dump tx status and descriptors are converted to using tracepoints, allowing for more efficient collection and post-processing of this data. These tracepoints are placed to collect data for all tx frames instead of only on errors. Logging of tx errors is also improved. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_ht() debug macroSeth Forshee4-20/+25
Also convert relevant messages to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_dma() debug macroSeth Forshee5-96/+73
Also convert relevant messages to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_int() debug macroSeth Forshee3-6/+8
Also convert relevant message to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add rx and tx debug macrosSeth Forshee3-10/+12
Also convert relevant messages over to use thses macros. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_mac80211() debug macroSeth Forshee3-27/+36
This macro is used for messages related to the 802.11 MAC layer. Relevant messages are also converted to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Use debug macros for general error and debug statementsSeth Forshee5-212/+221
Convert most uses of wiphy_* and pr_* for general error and debug messages to use the internal debug macros instead. Most code used only for initialization still use wiphy_err(), as well as some locations which are executed too early to use the debug macros. Some debug messages which are redundant or not useful are removed. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add support for writing debug messages to the trace bufferSeth Forshee4-4/+151
Add a new brcmsmac_msg trace system to enable writing of debug messages to the trace buffer, and add brcms_* macros for storing device debug messages in the trace buffer in addition to the printk log buffer. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add module parameter for setting the debug levelSeth Forshee2-14/+9
The debug level can be set by passing debug=... to brcmsmac whenever CONFIG_BRCMDBG is enabled. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcm80211: Convert log message levels to debug levelsSeth Forshee4-7/+6
In preparation for enhancements to debug and trace support, convert the message levels to debug levels which will be used for enabling categories of debug messages. The two message levels are little-used anyway and are combined into the BRCM_DL_INFO debug level. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcm80211: Allow trace support to be enabled separately from debugSeth Forshee2-3/+14
Since the runtime overhead of trace support is small when tracing is disabled, users may be interested in turning on trace support while leaving other debug features off. Add a new config option named CONFIG_BRCM_TRACING for this purpose. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Reduce number of entries in tx DMA ringsSeth Forshee1-2/+2
Currently up to 256 frames can be queued for each DMA ring. This is excessive, and now that we have better flow control we can get by with less. Experimentation has shown 64 to work well. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Use correct descriptor count when calculating next rx descriptorSeth Forshee1-1/+1
nextrxd() is calling txd(), which means that the tx descriptor count is used to determine when to wrap for determining the next ring buffer entry. This has worked so far since the driver has been using the same number of rx and tx descriptors, but it's obviously going to be a problem if different numbers of descriptors are used. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Remove internal tx queueSeth Forshee8-558/+316
The brcmsmac internal tx buffering is problematic. The amount of buffering is excessive (228 packets in addition to the 256 slots in each DMA ring), and frames may be dropped due to a lack of flow control. This patch reworks the transmit code path to remove the internal buffering. Frames are immediately handed off to the DMA support rather than passing through an intermediate queue. Non-aggregate frames are queued immediately into the tx rings, and aggregate frames are queued temporarily in an AMPDU session until ready for transmit. Transmit flow control is also added to avoid dropping packets when the tx rings are full. Conceptually this is a separate change, but it's included in this commit because removing the tx queue without adding flow control could cause significant problems. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 11:07:02 +0300