summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2013-08-22ath9k: Enable PLL fix only for AR9340/AR9330Sujith Manoharan1-2/+1
The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k_htc: Restore skb headroom when returning skb to mac80211Helmut Schaa1-0/+10
ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22Merge branch 'for-john' of ↵John W. Linville2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau2-2/+4
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-16ath9k: enable CSA functionality in ath9kSimon Wunderlich5-0/+43
CSA is only enabled for one interface, but the same limitation applies for mac80211 too. It checks whether the beacon has been sent (different approaches for non-EDMA-enabled and EDMA-enabled devices), and completes the channel switch after that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: enable support for 5 MHz and 10 MHz channelsSimon Wunderlich4-5/+25
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: set 5/10 MHz supported channels and fix durationSimon Wunderlich3-9/+42
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: report 5/10 MHz channelsSimon Wunderlich1-0/+10
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: announce that ath9k supports 5/10 MHzSimon Wunderlich1-0/+1
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: set 5/10 MHz supported channels and fix bitrateSimon Wunderlich2-8/+21
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: report 5/10 MHz channelsSimon Wunderlich1-0/+11
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: use chandef instead of channel_typeSimon Wunderlich6-40/+51
To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: always use SIFS times from OFDM for 5/10 MHzSimon Wunderlich1-3/+2
5/10 MHz channels should always use SIFS times as defined in IEEE 802.11-2012 18.4.4 (OFDM PHY characteristics). This makes it compatible to ath5k, which does the same. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Use lockless variant to initialize RX fifoSujith Manoharan1-1/+1
Since the rx_fifo queue is accessed only using the various lockless SKB queue routines, there is no need to initialize the lock and __skb_queue_head_init() can be used. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Optimize LNA checkSujith Manoharan1-30/+47
The documentation for antenna diversity says: "The decision of diversity is done at 802.11 preamble. So, for 11G/11B, for every MAC packet hardware will do a decision. But in 11N with aggregation, the decision is made only at the preamble and all other MPDUs will use the same LNA as the first MPDU." Make use of rs_firstaggr to avoid needlessly scanning for LNA changes. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Identify first subframe in an A-MPDUSujith Manoharan3-2/+5
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Handle invalid RSSISujith Manoharan1-16/+33
The combined RSSI can be invalid which is indicated by the value -128. Use RX_FLAG_NO_SIGNAL_VAL for such cases. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Remove unused function argumentSujith Manoharan1-2/+1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix error condition for corrupt descriptorsSujith Manoharan1-10/+18
In case a descriptor has the "done" bit clear and the next descriptor has it set, we drop both of them. If the packet that is received after these two packets is dropped for some reason, "discard_next" will not cleared. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Handle corrupt descriptors properlySujith Manoharan1-2/+10
The MIC/PHYERR/CRC error bits are valid only for the last desc. for chained packets. Check this early in the preprocess() routine and bail out. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Move the RX poll check to preprocess()Sujith Manoharan1-4/+4
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix RX beacon processingSujith Manoharan1-26/+22
Make sure that chained descriptors are handled correctly before the packet is parsed to determine if it is a beacon. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix RX packet counterSujith Manoharan1-4/+7
Handle chained descriptors and increment the RX counter only for valid packets. Since this is used only by MCI, use CONFIG_ATH9K_BTCOEX_SUPPORT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix RX debug statisticsSujith Manoharan1-2/+1
The various error bits that ath_debug_stat_rx() checks are valid only for the last descriptor for a chained packet, handle this correctly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix PHY error processingSujith Manoharan1-11/+12
Parse the PHY error details only for the last fragment in case descriptors are chained. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Reorder some functionsSujith Manoharan1-110/+110
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix TSF processingSujith Manoharan1-13/+20
There is no need to calculate the mactime for chained descriptor packets, so make sure that this is done only for the last fragment of valid packets. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix RX crypto processingSujith Manoharan1-8/+4
The keymiss events are valid only in the last descriptor of a packet. Fix this by making sure that we return early in case of chained descriptors. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Discard invalid frames earlySujith Manoharan1-16/+22
Frames with invalid or zero length can be discarded early, there is no need to check the crypto bits. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Fix phy error handling for DFSSujith Manoharan1-2/+1
Since the DFS code appears to process the phy errors ATH9K_PHYERR_RADAR and ATH9K_PHYERR_FALSE_RADAR_EXT, check for the correct phyerr status in the main RX tasklet routine. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: Use a subroutine to check for "mybeacon"Sujith Manoharan1-13/+23
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k_htc: do not use bulk on EP3 and EP4Oleksij Rempel1-27/+11
If usb auto suspend is enabled or system run in to suspend/resume cycle, ath9k-htc adapter will stop to response. It is reproducible on xhci HCs. Host part of problem: XHCI do timing calculation based on Transfer Type and bInterval, immediately after device was detected. Ath9k-htc try to overwrite this parameters on module probe and some changes in FW, since we do not initiate usb reset from the driver this changes are not took to account. So, before any kind of suspend or reset, host controller will operate with old parameters. Only after suspend/resume and if interface id stay unchanged, new parameters will by applied. Host will send bulk data with no intervals (?), which will cause overflow on FIFO of EP4. Firmware part of problem: By default, ath9k-htc adapters configured with EP3 and EP4 as interrupt endpoints. Current firmware will try to overwrite ConfigDescriptor to make EP3 and EP4 bulk. FIFO for this endpoints stay not reconfigured, so under the hood it is still Int EP. This patch is revert of 4a0e8ecca4ee commit which trying to reduce CPU usage on some systems. Since it will produce more bug as fixes, we will need to find other way to fix it. here is comment from kernel source which has some more explanation: * Some buggy high speed devices have bulk endpoints using * maxpacket sizes other than 512. High speed HCDs may not * be able to handle that particular bug, so let's warn... in our case EP3 and EP4 have maxpacket sizes = 64!!! Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16wil6210: let IP stack re-check HW TCP/UDP csum errorsVladimir Kondratiev1-6/+6
Fix for TCP iperf from Windows to Linux stall after about 1sec Hardware reports false errors in some situations: Microsoft IP stack, in violation of RFC 1624, set TCP checksum that should be 0x0 as 0xffff. hardware report Rx csum error. If HW csum absolutely trusted, this frame can be never received, as re-transmitted one will have same csum problem. In addition, it mess up block ack reorder buffer, as if packet dropped, it is not score boarded there. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: reset buffer stale flag in ath_tx_get_tid_subframeFelix Fietkau1-0/+2
If that flag stays set for a buffer that already ran through the tx path once, it might cause issues in tx completion processing. Better clear it early to ensure that this does not happen Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: simplify ath_tid_drainFelix Fietkau1-12/+0
ath_tid_drain is only called when a station entry is being removed, so there is no point in still tracking BAW state. Remove some unnecessary code and a bogus TODO comment related to this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: avoid accessing MRC registers on single-chain devicesFelix Fietkau1-0/+4
They are not implemented, and accessing them might trigger errors Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: simplify debugfs chainmask handlingFelix Fietkau1-88/+4
Writing to that file is unnecessary and quirky, the antenna API should be used instead. Use debugfs_create_u8 to allow reading the values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: remove ath9k_sta_remove_debugfsFelix Fietkau4-20/+1
mac80211 uses debugfs_remove_recursive, so there's no need for the driver to do an explicit cleanup of its sta debugfs entry. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: shrink a few data structures by reordering fieldsFelix Fietkau2-14/+14
Also reduce the size of a few fields where possible Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: fix rx descriptor related race conditionFelix Fietkau2-8/+14
Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville11-43/+270
2013-08-15ath10k: add support for HTT 3.0Michal Kazior5-39/+76
New firmware comes with new HTT protocol version. In 3.0 the separate mgmt tx command has been removed. All traffic is to be pushed through data tx (tx_frm) command with a twist - FW seems to not be able (yet?) to access tx fragment table so for manamgement frames frame pointer is passed directly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-15ath10k: add support for firmware newer than 636Michal Kazior3-11/+47
The mgmt_rx event structure has been expanded. Since the structure header is expanded the payload (i.e. mgmt frame) is shifted by a few bytes. This needs to be taken into account in order to support both old and new firmware. This introduces a fw_features to keep track of any FW-related ABI/behaviour changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: fix WEP in AP and IBSS modeMarek Puzyniak1-4/+0
WEP encoding was not working properly for AP and IBSS mode. TX frames were encrypted with default WEP tx key index set always to zero, what sometimes was wrong when different key index should be used. This patch allows to update WEP key index also for AP and IBSS mode. Problem detected during automated WEP tests. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: plug possible memory leak in WMIMichal Kazior1-0/+1
There was a possible memory leak when WMI command queue reached it's limit. Command buffers were not freed. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: implement 802.3 SNAP rx decap type A-MSDU handlingMichal Kazior1-2/+10
This enables driver to rx another decapped a-msdu frames. It should possibly help with throughputs in some cases and reduce (or eliminate) number of messages like this: ath10k: error processing msdus -524 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: fix HTT service setupMichal Kazior1-4/+4
The "disable credit flow" flag was set too late and it never was in the HTC service request message. This patch prevents firmware from reporting (useless) HTC credits for HTT service. HTT service doesn't use nor need credits. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: print errcode when CE ring setup failsMichal Kazior1-6/+9
This makes it possible to see the reason why the setup fails. It also adheres to code style of error checking in ath drivers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-08-14ath10k: clean up PCI completion statesMichal Kazior2-12/+23
Improve code readability by using enum and a switch-case. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 02:50:29 +0300