summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin2-4/+0
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-12-15ath10k: Avoid potential page alloc BUG_ON in tx free pathMohammed Shafi Shajakhan1-0/+2
'ath10k_htt_tx_free_cont_txbuf' and 'ath10k_htt_tx_free_cont_frag_desc' have NULL pointer checks to avoid crash if they are called twice but this is as of now not sufficient as these pointers are not assigned to NULL once the contiguous DMA memory allocation is freed, fix this. Though this may not be hit with the explicity check of state variable 'tx_mem_allocated' check, good to have this addressed as well. Below BUG_ON is hit when the above scenario is simulated with kernel debugging enabled page:f6d09a00 count:0 mapcount:-127 mapping: (null) index:0x0 flags: 0x40000000() page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:445! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC EIP is at put_page_testzero.part.88+0xd/0xf Call Trace: [<c118a2cc>] __free_pages+0x3c/0x40 [<c118a30e>] free_pages+0x3e/0x50 [<c10222b4>] dma_generic_free_coherent+0x24/0x30 [<f8c1d9a8>] ath10k_htt_tx_free_cont_txbuf+0xf8/0x140 [<f8c1e2a9>] ath10k_htt_tx_destroy+0x29/0xa0 [<f8c143e0>] ath10k_core_destroy+0x60/0x80 [ath10k_core] [<f8acd7e9>] ath10k_pci_remove+0x79/0xa0 [ath10k_pci] [<c13ed7a8>] pci_device_remove+0x38/0xb0 [<c14d3492>] __device_release_driver+0x72/0x100 [<c14d36b7>] driver_detach+0x97/0xa0 [<c14d29c0>] bus_remove_driver+0x40/0x80 [<c14d427a>] driver_unregister+0x2a/0x60 [<c13ec768>] pci_unregister_driver+0x18/0x70 [<f8aced4f>] ath10k_pci_exit+0xd/0x2be [ath10k_pci] [<c1101e78>] SyS_delete_module+0x158/0x210 [<c11b34f1>] ? __might_fault+0x41/0xa0 [<c11b353b>] ? __might_fault+0x8b/0xa0 [<c1001a4b>] do_fast_syscall_32+0x9b/0x1c0 [<c178da34>] sysenter_past_esp+0x45/0x74 Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Turn ath_txq_lock/unlock() into static inlines.Toke Høiland-Jørgensen2-14/+9
These are one-line functions that just call spin_lock/unlock_bh(); turn them into static inlines to avoid the function call overhead. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Introduce airtime fairness scheduling between stationsToke Høiland-Jørgensen9-56/+303
This reworks the ath9k driver to schedule transmissions to connected stations in a way that enforces airtime fairness between them. It accomplishes this by measuring the time spent transmitting to or receiving from a station at TX and RX completion, and accounting this to a per-station, per-QoS level airtime deficit. Then, an FQ-CoDel based deficit scheduler is employed at packet dequeue time, to control which station gets the next transmission opportunity. Airtime fairness can significantly improve the efficiency of the network when station rates vary. The following throughput values are from a simple three-station test scenario, where two stations operate at the highest HT20 rate, and one station at the lowest, and the scheduler is employed at the access point: Before / After Fast station 1: 19.17 / 25.09 Mbps Fast station 2: 19.83 / 25.21 Mbps Slow station: 2.58 / 1.77 Mbps Total: 41.58 / 52.07 Mbps The benefit of airtime fairness goes up the more stations are present. In a 30-station test with one station artificially limited to 1 Mbps, we have seen aggregate throughput go from 2.14 to 17.76 Mbps. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: define all EEPROM fields in Little Endian formatMartin Blumenstingl5-234/+174
The ar9300_eeprom logic is already using only 8-bit (endian neutral), __le16 and __le32 fields to state explicitly how the values should be interpreted. All other EEPROM implementations (4k, 9287 and def) were using u16 and u32 fields with additional logic to swap the values (read from the original EEPROM) so they match the current CPUs endianness. The EEPROM format defaults to "all values are Little Endian", indicated by the absence of the AR5416_EEPMISC_BIG_ENDIAN in the u8 EEPMISC register. If we detect that the EEPROM indicates Big Endian mode (AR5416_EEPMISC_BIG_ENDIAN is set in the EEPMISC register) then we'll swap the values to convert them into Little Endian. This is done by activating the EEPMISC based logic in ath9k_hw_nvram_swap_data even if AH_NO_EEP_SWAP is set (this makes ath9k behave like the FreeBSD driver, which also does not have a flag to enable swapping based on the AR5416_EEPMISC_BIG_ENDIAN bit). Before this logic was only used to enable swapping when "current CPU endianness != EEPROM endianness". After changing all relevant fields to __le16 and __le32 sparse was used to check that all code which reads any of these fields uses le{16,32}_to_cpu. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Make the EEPROM swapping check use the eepmisc registerMartin Blumenstingl1-16/+41
There are two ways of swapping the EEPROM data in the ath9k driver: 1) swab16 based on the first two EEPROM "magic" bytes (same for all EEPROM formats) 2) field and EEPROM format specific swab16/swab32 (different for eeprom_def, eeprom_4k and eeprom_9287) The result of the first check was used to also enable the second swap. This behavior seems incorrect, since the data may only be byte-swapped (afterwards the data could be in the correct endianness). Thus we introduce a separate check based on the "eepmisc" register (which is part of the EEPROM data). When bit 0 is set, then the EEPROM format specific values are in "big endian". This is also done by the FreeBSD kernel, see [0] for example. This allows us to parse EEPROMs with the "correct" magic bytes but swapped EEPROM format specific values. These EEPROMs (mostly found in lantiq and broadcom based big endian MIPS based devices) only worked due to platform specific "hacks" which swapped the EEPROM so the magic was inverted, which also enabled the format specific swapping. With this patch the old behavior is still supported, but neither recommended nor needed anymore. [0] https://github.com/freebsd/freebsd/blob/50719b56d9ce8d7d4beb53b16e9edb2e9a4a7a18/sys/dev/ath/ath_hal/ah_eeprom_9287.c#L351 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: consistently use get_eeprom_rev(ah)Martin Blumenstingl5-47/+52
The AR5416_VER_MASK macro does the same as get_eeprom_rev, except that one has to know the actual EEPROM type (and providing a reference to that in a variable named "eep"). Additionally the eeprom_*.c implementations used the same shifting logic multiple times to get the eeprom revision which was also unnecessary duplication of get_eeprom_rev. Also use the AR5416_EEP_VER_MINOR_MASK macro where needed and introduce a similar macro (AR5416_EEP_VER_MAJOR_MASK) for the major version. Finally drop AR9287_EEP_VER_MINOR_MASK since it simply duplicates the already defined AR5416_EEP_VER_MINOR_MASK. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: replace eeprom_param EEP_MINOR_REV with get_eeprom_revMartin Blumenstingl6-18/+4
get_eeprom(ah, EEP_MINOR_REV) and get_eeprom_rev(ah) are both doing the same thing: returning the EEPROM revision (12 lowest bits). Make the code consistent by using get_eeprom_rev(ah) everywhere. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Add an eeprom_ops callback for retrieving the eepmisc valueMartin Blumenstingl5-4/+29
This allows deciding if we have to swap the EEPROM data (so it matches the system's native endianness) even if no byte-swapping (swab16, based on the first two bytes in the EEPROM) is needed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: indicate that the AR9003 EEPROM template values are little endianMartin Blumenstingl2-5/+8
The eepMisc field was not set explicitly. The default value of 0 means that the values in the EEPROM (template) should be interpreted as little endian. However, this is not clear until comparing the AR9003 code with the other EEPROM formats. To make the code easier to understand we explicitly state that the values are little endian - there are no functional changes with this patch. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Add a #define for the EEPROM "eepmisc" endianness bitMartin Blumenstingl6-6/+8
This replaces a magic number with a named #define. Additionally it removes two "eeprom format" specific #defines for the "big endianness" bit which are the same on all eeprom formats. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-14Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: NTB: correct ntb_spad_count comment typo misc: ibmasm: fix typo in error message Remove references to dead make variable LINUX_INCLUDE Remove last traces of ikconfig.h treewide: Fix printk() message errors Documentation/device-mapper: s/getsize/getsz/
2016-12-14treewide: Fix printk() message errorsMasanari Iida2-2/+2
This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-13cfg80211: get rid of name indirection trick for ieee80211_get_channel()Arend Van Spriel1-2/+1
The comment on the name indirection suggested an issue but turned out to be untrue. Digging in older kernel version showed issue with ipw2x00 but that is no longer true so get rid on the name indirection. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-02Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of ↵David S. Miller29-330/+1461
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01ath5k: drop duplicate header vmalloc.hGeliang Tang1-1/+0
Drop duplicate header vmalloc.h from ath5k/debug.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: align to latest auto generated wmi.hLior David1-128/+264
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: add debugfs blobs for UCODE code and dataLior David3-15/+33
Added new areas to fw_mappings area for UCODE code and data areas. The new areas are only exposed through debugfs blobs, and mainly needed to access UCODE logs. The change does not affect crash dumps because the newly added areas overlap with the "upper" area which is already dumped. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: validate wil_pmc_alloc parametersMaya Erez1-6/+49
num_descriptors and descriptor_size needs to be checked for: 1) not being negative values 2) no overflow occurs when these are multiplied together as done in wil_pmc_read. An overflow of two signed integers is undefined behavior. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01wil6210: delay remain on channel when scan is activeLior David5-61/+149
Currently it was possible to call remain_on_channel(ROC) while scan was active and this caused a crash in the FW. In order to fix this problem and make the behavior consistent with other drivers, queue the ROC in case a scan is active and try it again when scan is done. As part of the fix, clean up some locking issues and return error if scan is called while ROC is active. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k_htc: don't use HZ for usb msg timeoutsAnthony Romano2-4/+7
The usb_*_msg() functions expect a timeout in msecs but are given HZ, which is ticks per second. If HZ=100, firmware download often times out when there is modest USB utilization and the device fails to initialize. Replaces HZ in usb_*_msg timeouts with 1000 msec since HZ is one second for timeouts in jiffies. Signed-off-by: Anthony Romano <anthony.romano@coreos.com> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: constify ath_bus_ops structureBhumika Goyal1-1/+1
Declare the structure ath_bus_ops as const as it is only passed as an argument to the function ath9k_init_device. This argument is of type const struct ath_bus_ops *, so ath_bus_ops structures with this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct ath_bus_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1,e2; @@ ath9k_init_device(e1,e2,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct ath_bus_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct ath_bus_ops i; File size before: text data bss dec hex filename 1295 232 0 1527 5f7 ath/ath9k/ahb.o File size after: text data bss dec hex filename 1359 176 0 1535 5ff ath/ath9k/ahb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: wmi-alloc-chunk should use DMA_BIDIRECTIONALBen Greear1-1/+1
These memory chunks are often used as 'swap' by the NIC, so it will be both reading and writing to these areas. This seems to fix errors like this on my x86-64 machine: kernel: DMAR: DMAR:[DMA Write] Request device [05:00.0] fault addr ff5de000 DMAR:[fault reason 05] PTE Write access is not set Tested-by: Marek Behun <kabel@blackhole.sk> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix Tx DMA alloc failure during continuous wifi down/upMohammed Shafi Shajakhan3-14/+51
With maximum number of vap's configured in a two radio supported systems of ~256 Mb RAM, doing a continuous wifi down/up and intermittent traffic streaming from the connected stations results in failure to allocate contiguous memory for tx buffers. This results in the disappearance of all VAP's and a manual reboot is needed as this is not a crash (or) OOM(for OOM killer to be invoked). To address this allocate contiguous memory for tx buffers one time and re-use them until the modules are unloaded but this results in a slight increase in memory footprint of ath10k when the wifi is down, but the modules are still loaded. Also as of now we use a separate bool 'tx_mem_allocated' to keep track of the one time memory allocation, as we cannot come up with something like 'ath10k_tx_{register,unregister}' before 'ath10k_probe_fw' is called as 'ath10k_htt_tx_alloc_cont_frag_desc' memory allocation is dependent on the hw_param 'continuous_frag_desc' a) memory footprint of ath10k without the change lsmod | grep ath10k ath10k_core 414498 1 ath10k_pci ath10k_pci 38236 0 b) memory footprint of ath10k with the change ath10k_core 414980 1 ath10k_pci ath10k_pci 38236 0 Memory Failure Call trace: hostapd: page allocation failure: order:6, mode:0xd0 [<c021f150>] (__dma_alloc_buffer.isra.23) from [<c021f23c>] (__alloc_remap_buffer.isra.26+0x14/0xb8) [<c021f23c>] (__alloc_remap_buffer.isra.26) from [<c021f664>] (__dma_alloc+0x224/0x2b8) [<c021f664>] (__dma_alloc) from [<c021f810>] (arm_dma_alloc+0x84/0x90) [<c021f810>] (arm_dma_alloc) from [<bf954764>] (ath10k_htt_tx_alloc+0xe0/0x2e4 [ath10k_core]) [<bf954764>] (ath10k_htt_tx_alloc [ath10k_core]) from [<bf94e6ac>] (ath10k_core_start+0x538/0xcf8 [ath10k_core]) [<bf94e6ac>] (ath10k_core_start [ath10k_core]) from [<bf947eec>] (ath10k_start+0xbc/0x56c [ath10k_core]) [<bf947eec>] (ath10k_start [ath10k_core]) from [<bf8a7a04>] (drv_start+0x40/0x5c [mac80211]) [<bf8a7a04>] (drv_start [mac80211]) from [<bf8b7cf8>] (ieee80211_do_open+0x170/0x82c [mac80211]) [<bf8b7cf8>] (ieee80211_do_open [mac80211]) from [<c056afc8>] (__dev_open+0xa0/0xf4) [21053.491752] Normal: 641*4kB (UEMR) 505*8kB (UEMR) 330*16kB (UEMR) 126*32kB (UEMR) 762*64kB (UEMR) 237*128kB (UEMR) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 95276kB Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix soft lockup during firmware crash/hw-restartMohammed Shafi Shajakhan2-2/+1
During firmware crash (or) user requested manual restart the system gets into a soft lock up state because of the below root cause. During user requested hardware restart / firmware crash the system goes into a soft lockup state as 'napi_synchronize' is called after 'napi_disable' (which sets 'NAPI_STATE_SCHED' bit) and it sleeps into infinite loop as it waits for 'NAPI_STATE_SCHED' to be cleared. This condition is hit because 'ath10k_hif_stop' is called twice as below (resulting in calling 'napi_synchronize' after 'napi_disable') 'ath10k_core_restart' -> 'ath10k_hif_stop' (ATH10K_STATE_ON) -> -> 'ieee80211_restart_hw' -> 'ath10k_start' -> 'ath10k_halt' -> 'ath10k_core_stop' -> 'ath10k_hif_stop' (ATH10K_STATE_RESTARTING) Fix this by calling 'ath10k_halt' in ath10k_core_restart itself as it makes more sense before informing mac80211 to restart h/w Also remove 'ath10k_halt' in ath10k_start for the state of 'restarting' Fixes: 3c97f5de1f28 ("ath10k: implement NAPI support") Cc: <stable@vger.kernel.org> # v4.9 Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath10k: fix TLV set regdomain commandErik Stromdahl1-2/+2
There is a typo bug in the current implementation of ath10k_wmi_tlv_op_gen_pdev_set_rd. The conformance test limits are not set up properly. The two arguments ctl2g and ctl5g were not used at all. Instead, the regdomain arguments rd2g and rd5g were used for the ctl settings as well. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath9k: feed only active spectral / dfs-detectorZefir Kurtisi1-3/+14
Radar pulse and spectral scan reports are provided by the HW with the ATH9K_RXERR_PHY flag set. Those are forwarded to the dfs-detector and spectral module for further processing. For some older chips, the pre-conditions checked in those modules are ambiguous, since ATH9K_PHYERR_RADAR is used to tag both types. As a result, spectral frames are fed into the dfs-detector and vice versa. This could lead to a false radar detection on a non-DFS channel (which is uncritical), but more relevant it causes useless CPU load for processing invalid frames. This commit ensures that the dfs-detector and spectral collector are only fed when they are active. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-28Merge tag 'wireless-drivers-next-for-davem-2016-11-25' of ↵David S. Miller27-291/+716
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: iwlwifi * finalize and enable dynamic queue allocation * use dev_coredumpmsg() to prevent locking the driver * small fix to pass the AID to the FW * use FW PS decisions with multi-queue ath9k * add device tree bindings * switch to use mac80211 intermediate software queues to reduce latency and fix bufferbloat wl18xx * allow scanning in AP mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-23ath10k: fix monitor vdev for receiving other bss framesManoharan, Rajkumar3-1/+11
In order to receive other BSS entries in mesh mode, Monitor vdev is created whenever filter flag is set with OTHER_BSS. Recently it is root caused that setting promisc filter for Mesh interface is causing performance and stability issues. To fix this issue, firmware will configure appropriate rxfilters by default for mesh vdev during vdev creation. This change fixes monitor vdev creation based on firmware IE Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add support for per sta tx bitrateAnilkumar Kolli1-0/+13
Per STA tx bitrate info is filled from peer stats. Export per sta txrate info to cfg80211/nl80211 Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add per peer htt tx stats support for 10.4Anilkumar Kolli5-1/+178
Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS' event, Firmware sends one HTT event for every four PPDUs. HTT payload has success pkts/bytes, failed pkts/bytes, retry pkts/bytes and rate info per ppdu. Peer stats are enabled through 'WMI_SERVICE_PEER_STATS', which are nowadays enabled by default. Parse peer stats and update the tx rate information per STA. tx rate, Peer stats are tested on QCA4019 with Firmware version 10.4-3.2.1-00028. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: support NL80211_ATTR_WIPHY_RETRY_SHORTLior David4-0/+97
Add support for setting retry limit for short frames, using NL80211_CMD_SET_WIPHY with the attribute NL80211_ATTR_WIPHY_RETRY_SHORT. Update wiphy->retry_short from the FW default when interface is brought up. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: align to latest auto generated wmi.hLior David1-2/+206
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for abort scanMaya Erez5-34/+87
Implement cfg80211 abort_scan op to allow the upper layer to abort an ongoing scan request. In addition, notify wil6210 device on scan abort request instead of just ignoring the scan response. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: fix deadlock when using fw_no_recovery optionLior David1-7/+8
When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: add support for power save enable / disableMaya Erez3-1/+67
New power management wmi commands provide the ability to change the device power save profile (enable / disable power save). Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23wil6210: fix net queue stop/wakeDedy Lansky5-16/+117
Driver calls to netif_tx_stop_all_queues/netif_tx_wake_all_queues are inconsistent. In several cases, driver can get to a situation where net queues are stopped forever and data cannot be sent. The fix is to stop net queues if there is at least one vring which is "full" and to wake net queues if all vrings are not "full". Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath9k: fix NULL pointer dereferenceMiaoqing Pan1-1/+7
relay_open() may return NULL, check the return value to avoid the crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] PGD 41cf28067 PUD 41be92067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35 Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15 07/04/2011 task: ffffffff81e0c4c0 task.stack: ffffffff81e00000 RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98 RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0 Stack: 0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9 000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0 0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60 Call Trace: <IRQ> [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k] [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0 [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0 Reported-by: Devin Tuchsen <devin.tuchsen@gmail.com> Tested-by: Devin Tuchsen <devin.tuchsen@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on successMatthias Schiffer1-1/+1
Commit b2d70d4944c1 ("ath9k: make GPIO API to support both of WMAC and SOC") refactored ath9k_hw_gpio_get() to support both WMAC and SOC GPIOs, changing the return on success from 1 to BIT(gpio). This broke some callers like ath_is_rfkill_set(). This doesn't fix any known bug in mainline at the moment, but should be fixed anyway. Instead of fixing all callers, change ath9k_hw_gpio_get() back to only return 0 or 1. Fixes: b2d70d4944c1 ("ath9k: make GPIO API to support both of WMAC and SOC") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> [kvalo@qca.qualcomm.com: mention that doesn't fix any known bug] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add spectral scan support to wmi-tlvMichal Kazior1-0/+72
Command structure and event flow doesn't seem to be any different compared to existing implementation for other firmware branches. This patch effectively adds in-driver support for spectral scanning on QCA61x4 and QCA9377. Tested QCA9377 w/ WLAN.TF.1.0-00267-1. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: fix null deref on wmi-tlv when trying spectral scanMichal Kazior1-0/+6
WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: remove set/get_tsf ieee80211_opsPedersen, Thomas4-44/+0
Neither of these did the right thing: - get_tsf just returned 0 - set_tsf assumed a simple offset was applied against get_tsf(), which works, except in the case of calculating TSF from rx_mactime (actual TSF). Just remove them for now. We can reimplement set_tsf in terms of TSF increment/decrement in the future if get_tsf is ever supported by FW. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: implement offset_tsf ieee80211_opPedersen, Thomas3-0/+34
Current set_tsf is implemented in terms of TSF_INCREMENT only. Instead support new WMI command TSF_DECREMENT and export these through offset_tsf. Advantage is we get more accurate TSF adjustments, and don't calculate wrong offset in case absolute TSF was calculated from rx_mactime (actual TSF). The new WMI command is available in firmware 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new firmware or vice versa shouldn't be a problem since get/set tsf logic was already broken. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: advertize hardware packet loss mechanismRajkumar Manoharan1-0/+1
Indicate hardware (or firmware) supports that CQM packet-loss report will be generated based on station kickout algorithm. As of now mac80211 tracks connection loss by missing msdu counts (50) whereas ath10k firmware tracks them by missing ppdus (+ BAR tries). While firmware is trying to adapt its rate table, mac80211 might send out low_ack event to hostapd. This is causing frequent connect and disconnect iteration under noisy environment or when station is roaming around. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo16-275/+280
ath.git patches for 4.10. Major changes: ath9k * add device tree bindings * switch to use mac80211 intermediate software queues to reduce latency and fix bufferbloat
2016-11-17wireless: fix bogus maybe-uninitialized warningArnd Bergmann1-4/+4
The hostap_80211_rx() function is supposed to set up the mac addresses for four possible cases, based on two bits of input data. For some reason, gcc decides that it's possible that none of the these four cases apply and the addresses remain uninitialized: drivers/net/wireless/intersil/hostap/hostap_80211_rx.c: In function ‘hostap_80211_rx’: arch/x86/include/asm/string_32.h:77:14: warning: ‘src’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/intel/ipw2x00/libipw_rx.c: In function ‘libipw_rx’: arch/x86/include/asm/string_32.h:77:14: error: ‘dst’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/include/asm/string_32.h:78:22: error: ‘*((void *)&dst+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This warning is clearly nonsense, but changing the last case into 'default' makes it obvious to the compiler too, which avoids the warning and probably leads to better object code too. The same code is duplicated several times in the kernel, so this patch uses the same workaround for all copies. The exact configuration was hit only very rarely in randconfig builds and I only saw it in three drivers, but I assume that all of them are potentially affected, and it's better to keep the code consistent. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-15ath10k: use the right length of "background"Nicolas Iooss1-1/+1
The word "background" contains 10 characters so the third argument of strncmp() need to be 10 in order to match this prefix correctly. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: 855aed1220d2 ("ath10k: add spectral scan feature") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-15ath10k: remove extraneous error message in tx allocMohammed Shafi Shajakhan1-3/+1
Remove extraneous error message in 'ath10k_htt_tx_alloc_cont_frag_desc' as the caller 'ath10k_htt_tx_alloc' already dumps a proper error message Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-15ath10k: clean up HTT tx buffer allocation and freeMohammed Shafi Shajakhan1-25/+50
cleanup 'ath10k_htt_tx_alloc' by introducing the API's 'ath10k_htt_tx_alloc/free_{cont_txbuf, txdone_fifo} and re-use them whereever needed Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-15ath10k: fix failure to send NULL func frame for 10.4Mohammed Shafi Shajakhan2-6/+2
This partially reverts 'commit 2cdce425aa33 ("ath10k: Fix broken NULL func data frame status for 10.4")' Unfortunately this breaks sending NULL func and the existing issue of obtaining proper tx status for NULL function will be fixed. Also update the comments for feature flag added to be useless and not working Fixes: 2cdce425aa33 "ath10k: Fix broken NULL func data frame status for 10.4" Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 05:48:14 +0300