summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16networking: introduce and use skb_put_data()Johannes Berg6-15/+11
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg1-2/+1
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16ath6kl: fix spelling mistake: "Indicat" -> "Indicate"Colin Ian King1-1/+1
Trivial fix to spelling mistake in ath6kl_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16ath10k: add per chain RSSI reportingNorik Dzhandzhapanyan1-0/+13
Report per chain RSSI to mac80211. Signed-off-by: Norik Dzhandzhapanyan <norikd@gmail.com> [kvalo@qca.qualcomm.com: fix conflicts and style] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16ath10k: define structures for CE ctrl/misc registerSarada Prasanna Garnayak6-195/+325
Define structures for the copy engine ctrl/misc registers, that includes CE CMD halt, watermark source, watermark destination, host IE ring, source, destination and dmax ring. This adds support to avoid the conditional compilation, code optimization and dynamic configuration of the copy engine register map for respective hardware bus interface. Signed-off-by: Sarada Prasanna Garnayak <c_sgarna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12Merge tag 'wireless-drivers-next-for-davem-2017-06-12' of ↵David S. Miller22-104/+2782
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 The first pull request for 4.13. We have a new driver qtnfmac, but also rsi driver got a support for new firmware and supporting ath10k SDIO devices was started. Major changes: ath10k * add initial SDIO support (still work in progress) rsi * new loading for the new firmware version rtlwifi * final patches for the new btcoex support rt2x00 * add device ID for Epson WN7512BEP qtnfmac * new driver for Quantenna QSR10G chipsets ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-1/+1
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01ath10k: fix the logic of limiting tdls peer countsRyan Hsu1-28/+21
The original idea is to limit the maximum TDLS peer link, but the logic is always false, and never be able to restrict the number of TDLS peer creation. Fix the logic here and also move the checking earlier, so that it could avoid to handle the failure case, e.g disable the tdls peer, delete the peer and also vdev count cleanup. Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-01ath10k: add BMI parameters to fix calibration from DT/pre-calAnilkumar Kolli2-3/+15
QCA99X0, QCA9888, QCA9984 supports calibration data in either OTP or DT/pre-cal file. Current ath10k supports Calibration data from OTP only. If caldata is loaded from DT/pre-cal file, fetching board id and applying calibration parameters like tx power gets failed. error log: [ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2 [ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2) This patch adds calibration data support from DT/pre-cal file. Below parameters are used to get board id and applying calibration parameters from cal data. EEPROM[OTP] FLASH[DT/pre-cal file] Cal param 0x700 0x10000 Board id 0x10 0x8000 Tested on QCA9888 with pre-cal file. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-01ath10k: initialize nbytes to 0Ben Greear1-0/+4
ath10k firmware checks nbytes == 0 as part of determining if DMA has completed successfully. To help make this work more often, have the driver initialize nbytes to zero when freeing the descriptor slot. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-01ath10k: log when longer bmi cmds happenBen Greear1-6/+21
This lets one have a clue that maybe timeouts are happening when we just aren't waiting long enough. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-01ath10k: increase BMI timeoutBen Greear1-2/+2
When testing a 9888 chipset NIC, I notice it often takes almost 2 seconds, and then many times OTP fails, probably due to the two-second timeout. [ 2269.841842] ath10k_pci 0000:05:00.0: bmi cmd took: 1984 jiffies (HZ: 1000), rv: 0 [ 2273.608185] ath10k_pci 0000:05:00.0: bmi cmd took: 1986 jiffies (HZ: 1000), rv: 0 [ 2277.294732] ath10k_pci 0000:05:00.0: bmi cmd took: 1989 jiffies (HZ: 1000), rv: 0 So, increase the BMI timeout to 3 seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-31ath10k: go back to using dma_alloc_coherent() for firmware scratch memoryAdrian Chadd1-25/+10
This reverts commit b057886524be ("ath10k: do not use coherent memory for allocated device memory chunks") in 2015 which converted this allocation from dma_map_coherent() to kzalloc() / dma_map_single(). The current problem manifests when using later model NICs with larger (>700KiB) scratch spaces in memory. Although the kzalloc call succeeds, the software IOMMU TLB code (via dma_map_single()) panics because it can't find 700KiB of linear physmem bounce buffers for DMA. Now, this is a bit of a silly failure mode for the dma map API, but it's what we currently have to play with. In these cases, doing kzalloc() works fine, but the dma_map_single() call fails. After chatting with Linus briefly about this, it indeed should be using dma_alloc_coherent() for doing larger device memory allocation that requires some kind of physical address mapping. You're not supposed to be using kzalloc and dma_map_* calls for large memory regions, and I'm guessing not for long-held mappings either. Typically dma mappings should be temporary for DMA, not long held like these. Now, since hopefully the major annoying underlying problem has also been addressed (ie, ath10k is no longer tears down all of these allocations and reallocates them every time the vdevs are brought down) fragmentation should stop being such a touchy issue. If it is though, using dma_alloc_coherent() use gets us access to the CMB APIs too relatively easily and ideally we would be allocating memory early in boot for exactly these reasons. Signed-off-by: Adrian Chadd <adrian@FreeBSD.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: support devices with different PCIe bar sizeMaya Erez4-12/+17
wil6210 devices can have different PCIe bar size, hence get the bar size from PCIe device instead of using a constant bar size. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: Improve AP stop handlingHamad Kadmany1-0/+2
Set resetting flag early when stopping AP to avoid disconnect events as a result of disconnect command sent during AP stop procedure. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: add option to load FTM FWHamad Kadmany2-7/+20
Module parameter allows to load specific FW used for FTM testing. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: low level RF sector APILior David1-0/+573
Added vendor commands for low level control over RF sectors. It allows user space a fine-grained control over RF characteristics for TX and RX, such as direction and gain of TX/RX. Main usages are debugging and diagnostics, but also operational use cases. API includes getting/setting a specific RF sector configuration, as well as getting/setting the selected sector which is used to communicate with a station. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23ath10k: fix reported HT MCS rates with NSS > 1Sven Eckelmann1-4/+10
The QCA4019 firmware 10.4-3.2.1-00050 reports only HT MCS rates between 0-9. But 802.11n MCS rates can be larger than that. For example a 2x2 device can send with up to MCS 15. The firmware encodes the higher MCS rates using the NSS field. The actual calculation is not documented by QCA but it seems like the NSS field can be mapped for HT rates to following MCS offsets: * NSS 1: 0 * NSS 2: 8 * NSS 3: 16 * NSS 4: 24 This offset therefore has to be added for HT rates before they are stored in the rate_info struct. Fixes: cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23ath10k: remove unnecessary codeGustavo A. R. Silva1-9/+0
The array fields in struct wmi_start_scan_arg that are checked here are fixed size arrays so they can never be NULL. Addresses-Coverity-ID: 1260031 Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wcn36xx: Close SMD channel on device removalBjorn Andersson1-0/+2
The SMD channel is not the primary WCNSS channel and must explicitly be closed as the device is removed, or the channel will already by open on a subsequent probe call in e.g. the case of reloading the kernel module. This issue was introduced because I simplified the underlying SMD implementation while the SMD adaptions of the driver sat on the mailing list, but missed to update these patches. The patch does however only apply back to the transition to rpmsg, hence the limited Fixes. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Reported-by: Eyal Ilsar <c_eilsar@qti.qualcomm.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo22-104/+2782
ath.git patches for 4.13. Major changes: ath10k * add initial SDIO support (still work in progress)
2017-05-19ath9k: check ah->curchan when updating tx powerStanislaw Gruszka1-1/+1
When driver fail to reset card ah->curchan value stay NULL. When later driver try to update tx power it oops by using ah->curchan (calltrace is shown below). This problem were reported at various places and for some it was fixed by making ath9k_hw_chip_reset() do not fail. I have this bug report on some oldish RHEL kernel with AR9285, however it's hard to debug where reset fail when kernel OOPS, so I think this patch should be applied. Hopefully ah->curchan is not used unconditionally on other places until is initialized on ath9k_config(). ath: phy0: Chip reset failed ath: phy0: Unable to reset hardware; reset status -22 (freq 2412 MHz) BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f8a35585>] ath9k_hw_set_txpowerlimit+0x25/0x80 [ath9k_hw] Oops: 0000 [#1] SMP <snip> Call Trace: [<f8aac1aa>] ? ath9k_cmn_update_txpow+0x1a/0x30 [ath9k_common] [<f8cf4f4e>] ? ath_complete_reset+0x4e/0x130 [ath9k] [<f8cf54d7>] ? ath9k_start+0x127/0x1e0 [ath9k] [<f8c2e52f>] ? ieee80211_do_open+0x30f/0x910 [mac80211] [<c07bd96d>] ? dev_open+0x8d/0xf0 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath9k: remove unnecessary codeGustavo A. R. Silva1-1/+1
The array field eeprom_data in struct th9k_platform_data is a fixed size array so it can never be NULL. Addresses-Coverity-ID: 1364903 Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19wil6210: use memdup_userGeliang Tang1-8/+4
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath5k: fix memory leak on buf on failed eeprom readColin Ian King1-1/+4
The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath9k: fix spelling in ath9k_tx99_init()Ammly Fredrick1-1/+1
It's spelled hardware, not harware. Signed-off-by: Ammly Fredrick <ammlyf@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath6kl: assure headroom of skbuff is writable in .start_xmit()Arend Van Spriel1-9/+4
An issue was found brcmfmac driver in which a skbuff in .start_xmit() callback was actually cloned. So instead of checking for sufficient headroom it should also be writable. Hence use skb_cow_head() to check and expand the headroom appropriately. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-08mac80211: properly remove RX_ENC_FLAG_40MHZJohannes Berg2-3/+3
Somehow I missed this in my RX rate cleanup series, causing some drivers to not report correct bandwidth since this flag isn't used by mac80211 anymore. Fix this, and make hwsim also report higher bandwidths appropriately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-04ath10k: append the wmi_op_version to testmode get_version cmdRyan Hsu2-0/+8
QCA9xxx and QCA61x4/QCA93xx are using different wmi operation, in order for userspace to differentiate it, appends the wmi_op_version information alone with the get_version command. Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: fix out of bounds access to local bufferMichael Mera1-6/+10
During write to debugfs file simulate_fw_crash, fixed-size local buffer 'buf' is accessed and modified at index 'count-1', where 'count' is the size of the write (so potentially out of bounds). This patch fixes this problem. Signed-off-by: Michael Mera <dev@michaelmera.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: add initial SDIO supportErik Stromdahl4-0/+2352
Chipsets like QCA6584 have support for SDIO so add initial SDIO bus support to ath10k. With this patch we have the low level HTC protocol working and it's possible to boot the firmware, but it's still not possible to connect or anything like. More changes are needed for full functionality. For that reason we print during initialisation: WARNING: ath10k SDIO support is incomplete, don't expect anything to work! Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@qca.qualcomm.com: refactoring, cleanup, commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: different fw file name for sdioErik Stromdahl1-1/+12
Since both SDIO based chipsets will use different firmware from the PCIe and AHB chipsets, the fw file name must be different depending on bus type. The new firmware names are: For PCIe and AHB: firmware-<api_version>.bin (same as before) For SDIO: firmware-sdio-<api_version>.bin Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: ready_ext msg supportErik Stromdahl2-6/+27
Added support for extended ready message. The extended ready message contains the maximum bundle count supported by SDIO chipsets. It is transmitted by SDIO chipset only and replaces the "standard" ready message in this case. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: sdio get target infoErik Stromdahl3-1/+77
Special BMI get target info function for SDIO. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: add sdio extra initializationsErik Stromdahl1-0/+18
Extra initializations needed by all sdio boards. Derived from qcacld. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: various sdio related definitionsErik Stromdahl4-0/+82
Debug masks for SDIO HIF layer. Address definitions for SDIO/mbox based chipsets. Augmented struct host_interest with more members. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: refactorizationErik Stromdahl1-40/+34
Code refactorization: Moved the code for ep 0 in ath10k_htc_rx_completion_handler to ath10k_htc_control_rx_complete. This eases the implementation of SDIO/mbox significantly since the ep_rx_complete cb is invoked directly from the SDIO/mbox hif layer. Since the ath10k_htc_control_rx_complete already is present (only containing a warning message) there is no reason for not using it (instead of having a special case for ep 0 in ath10k_htc_rx_completion_handler). Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: move htc ctrl ep connect to htc_initErik Stromdahl1-22/+17
This patch moves the HTC ctrl service connect from htc_wait_target to htc_init. This is done in order to make sure the htc ctrl service is setup properly before hif_start is called. The reason for this is that we want the HTC ctrl service callback to be initialized before the target sends the HTC ready message. The ready message will always be transmitted on endpoint 0 (which is always assigned to the HTC control service) so it makes more sense if HTC control has been connected before the ready message is received. Since the service to pipe mapping is done as a part of the service connect, the get_default_pipe call is redundant and was removed. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: rx trailer lookahead supportErik Stromdahl2-5/+120
The RX trailer parsing is now capable of parsing lookahead reports. A lookahead contains the first 4 bytes of the next HTC message (that will be read in the next SDIO read operation). Lookaheads are used by the SDIO/mbox HIF layer to determine if the next message is part of a bundle, which endpoint it belongs to and how long it is. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: made static function publicErik Stromdahl2-6/+14
Changed ath10k_htc_notify_tx_completion and ath10k_htc_process_trailer from static to non static. These functions are needed by SDIO/mbox. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel2-2/+2
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern1-2/+8
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg1-3/+3
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg10-29/+32
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg11-57/+56
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel1-1/+1
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27nl80211: allow multiple active scheduled scan requestsArend Van Spriel1-1/+1
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-24Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of ↵David S. Miller45-235/+526
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Quite a lot of patches for rtlwifi and iwlwifi this time, but changes also for other active wireless drivers. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers iwlwifi * work to support A000 devices continues * add support for FW API 30 * add Geographical and Dynamic Specific Absorption Rate (SAR) support * support a few new PCI device IDs rtlwifi * work on adding Bluetooth coexistance support, not finished yet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-next-for-davem-2017-04-18' of ↵David S. Miller9-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 07:01:44 +0300