summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)AuthorFilesLines
2014-10-02ath9k: Print RoC expirationSujith Manoharan1-0/+7
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k: fix getting tx duration for dynackFelix Fietkau7-18/+49
On AR9003, tx control and tx status are in separate descriptor rings. Tx duration is extracted from the tx control descriptor data, which ar9003_hw_proc_txdesc cannot access. Fix getting the duration by adding a separate callback for it. Acked-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k: Check early for HW resetSujith Manoharan1-4/+6
chan_lock is not required for checking if we are in the middle of a HW reset, so do it early. This also removes the small window where the lock is dropped and reacquired. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k_hw: fix PLL clock initialization for newer SoCFelix Fietkau3-4/+40
On AR934x and newer SoC devices, the layout of the AR_RTC_PLL_CONTROL register changed. This currently breaks at least 5/10 MHz operation. AR933x uses the old layout. It might also have been causing other stability issues because of the different location of the PLL_BYPASS bit which needs to be set during PLL clock initialization. This patch also removes more instances of hardcoded register values in favor of properly computed ones with the PLL_BYPASS bit added. Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k_hw: reduce ANI spur immunity setting on HT40 extension channelFelix Fietkau1-3/+2
The cycpwr_thr1 value needs to be lower on the extension channel than on the control channel, similar to how the register settings are programmed in the initvals. Also drop the unnecessary check for HT40 - this register can always be written. This patch has been reported to improve HT40 stability and throughput in some environments. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30Revert "ath9k_hw: reduce ANI firstep range for older chips"Felix Fietkau1-1/+3
This reverts commit 09efc56345be4146ab9fc87a55c837ed5d6ea1ab I've received reports that this change is decreasing throughput in some rare conditions on an AR9280 based device Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k_hw: disable hardware ad-hoc flag on ar934x rev 3Felix Fietkau2-3/+10
On AR934x rev 3, settin the ad-hoc flag completely messes up hardware state - beacons get stuck, almost no packets make it out, hardware is constantly reset. When leaving out that flag and setting up the hw like in AP mode, TSF timers won't be automatically synced, but at least the rest works. AR934x rev 2 and older are not affected by this bug Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k: use ah->get_mac_revision for all SoC devices if availableFelix Fietkau1-7/+4
It is needed for AR934x as well Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27ath9k: Fix offchannel queuingSujith Manoharan1-3/+3
Clearing IEEE80211_TX_CTL_PS_RESPONSE in a frame that is not in the current context doesn't seem right. Instead make sure that we don't add such frames to the UAPSD queue by using a local variable. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27ath9k: Use normal queues for offchannel framesSujith Manoharan1-2/+1
There is no reason why frames marked with IEEE80211_TX_CTL_TX_OFFCHAN have to be sent using the UAPSD queue. Since mac80211 makes sure that RoC is done before pushing an offchannel frame to the driver, we can use the normal TX queues for transmission. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27ath9k: Fix queue managementSujith Manoharan1-7/+3
Since we use IEEE80211_HW_QUEUE_CONTROL now, the CAB/Offchannel queues are registered as the last two queues. There is no need to check and reassign the queues in the TX start()/done() routines. CAB frames will not reach the tx() callback since we set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING and pull the buffered frames during beacon transmission. We also don't have a special HW queue for handling off-channel frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27ath9k: Fix p2p address managementSujith Manoharan2-0/+37
When multiple channel contexts are enabled, a p2p interface that is assigned to a context will have an address that is different from the device mac address, which is used by wpa_s as the p2p device ID. Certain frames like provision requests use the device address and these get dropped since ath9k_calculate_summary_state() iterates over only the active interfaces in a context and the device address is not used. Fix this by adding the device mac address to the bssid mask. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27ath9k: Cache BSS informationSujith Manoharan3-7/+17
Using the BSS information stored in mac80211 directly is racy in certain conditions. For example, in a MCC setup, if the scheduler is switching channels when a local deauth is issued, calculation of the opmode/bssid etc. is incorrect. To avoid this, store the bss params in the driver and use it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-23ath9k: Fix NULL pointer dereference on early irqWojciech Dubowik1-1/+1
The ah struct might not have been initialized when interrupt comes so check for it. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: enable ext channel pulse detectionLorenzo Bianconi1-0/+1
Enable pulse detection on extension channel if 40MHz channel width has been set Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: Fix build errorSujith Manoharan1-0/+2
This happens when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled. ../drivers/net/wireless/ath/ath9k/recv.c: In function ‘ath_rx_ps_beacon’: ../drivers/net/wireless/ath/ath9k/recv.c:553:27: error: ‘struct ath_softc’ has no member named ‘offchannel’ if (sc->cur_chan == &sc->offchannel.chan) ^ ../scripts/Makefile.build:257: recipe for target 'drivers/net/wireless/ath/ath9k/recv.o' failed make[10]: *** [drivers/net/wireless/ath/ath9k/recv.o] Error 1 ../scripts/Makefile.build:404: recipe for target 'drivers/net/wireless/ath/ath9k' failed make[9]: *** [drivers/net/wireless/ath/ath9k] Error 2 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: initialize ath_node linked listLorenzo Bianconi1-0/+4
Initialize neighbor linked list used by dynack to compute ACK timeout as the maximum STA ACK timeout Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: enable dynack using set_coverage_class codepathLorenzo Bianconi1-4/+29
Enable ACK timeout estimation algorithm if set_coverage_class routine has been called with negative coverage_class parameter. Dynack is automatically disabled setting valid value for coverage class Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add debugfs support for dynackLorenzo Bianconi1-0/+28
Add ack_to entry to debugfs in order to dump current ACK timeout value Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: enable control frame receptionLorenzo Bianconi1-1/+2
Set control frame bit in rx filter if dynack processing has been activated in order to enable ACK frame reception Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add sampling methods for (tx|rx) timestampLorenzo Bianconi2-0/+10
Add sampling methods for ACK RX timestamp in ath_rx_tasklet() and for TX frame timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer(). These samples will be used in dynack processing for ACK timeout estimation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: do not overwrite ACK timeout estimationLorenzo Bianconi1-0/+8
Do not overwrite ACK timeout estimation in ath9k_hw_init_global_settings() if dynack processing has been enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add config for (en|dis)abling ACK timeout estimationLorenzo Bianconi2-0/+12
Add ACK timeout estimation algorithm to ath9k Makefile and Kconfig Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add dynamic ACK timeout estimationLorenzo Bianconi5-0/+462
Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Tested-by: Philippe Duchein <wireless-dev@duchein.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add duration field to ath_tx_statusLorenzo Bianconi3-0/+17
Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: export methods related to ACK timeout estimationLorenzo Bianconi2-3/+7
Remove static keyword and export ath9k_hw_setslottime(), ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These methods will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k_htc: fix random decryption failureJohannes Stezenbach1-1/+1
In v3.15 the driver stopped to accept network packets after successful authentification, which could be worked around by passing the nohwcrypt=1 module parameter. This was not reproducible by everyone, and showed random behaviour in some tests. It was caused by an uninitialized variable introduced in 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept") and used in 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78581 Fixes: 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess") Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Fix primary station configurationSujith Manoharan1-5/+1
Assign 'primary_sta' to the active primary station interface after iterating over the list of interfaces. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove useless opmode checkSujith Manoharan1-7/+0
The opmode is verified to be NL80211_IFTYPE_STATION before calling ath9k_set_assoc_state(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Set offchannel state properlySujith Manoharan1-15/+42
When switching offchannel, BSS related information in the HW has to be reset to default values. Add a routine to do this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Check beaconing mode properlySujith Manoharan1-0/+3
In MCC mode, the TSF of a context needs to be adjusted only if it is GO/AP. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove unnecessary tbtt assignmentSujith Manoharan3-6/+5
The next_tbtt variable in the scheduler is needed only for GO/AP mode operation and is always read from the NEXT_TBTT_TIMER in the HW. There is no need to store the timestamp for received beacons. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Fix beacon processing in offchannelSujith Manoharan1-1/+9
When interfaces of different types are present in a context and an offchannel request is received on a STA interface, we end up trying to process beacons received when we are offchannel. This hits the below warning since offchannel will not have proper beacon parameters. Fix this by not processing beacons received when we are offchannel. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at ../drivers/net/wireless/ath/ath9k/recv.c:552 ath_rx_tasklet+0xf8f/0x1020 [ath9k]() CPU: 1 PID: 0 Comm: swapper/1 Tainted: G O 3.17.0-rc4-wl-debug #16 Hardware name: LENOVO 28427ZQ/INVALID, BIOS 6JET58WW (1.16 ) 09/17/2009 0000000000000000 15916787056abba3 ffff88013b603d08 ffffffff8156af94 ffff88013b603d50 ffff88013b603d40 ffffffff81070dbd ffff8800a84bb300 ffff8800b05db358 ffff8800a84cc578 ffff8800a84bb300 ffff8800b05daa40 Call Trace: <IRQ> [<ffffffff8156af94>] dump_stack+0x4d/0x6f [<ffffffff81070dbd>] warn_slowpath_common+0x7d/0xa0 [<ffffffff81070e3c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff81572143>] ? _raw_spin_lock_irqsave+0x83/0xa0 [<ffffffffa09d04a6>] ? ath_rx_tasklet+0x9f6/0x1020 [ath9k] [<ffffffffa09d0a3f>] ath_rx_tasklet+0xf8f/0x1020 [ath9k] [<ffffffffa09cd4f4>] ath9k_tasklet+0xf4/0x310 [ath9k] [<ffffffff81075a97>] tasklet_action+0xe7/0xf0 [<ffffffff8107508a>] __do_softirq+0x12a/0x340 [<ffffffff8107544e>] irq_exit+0x9e/0xc0 [<ffffffff81575e56>] do_IRQ+0x56/0xe0 [<ffffffff81573c72>] common_interrupt+0x72/0x72 <EOI> [<ffffffff81421037>] ? cpuidle_enter_state+0x67/0x1a0 [<ffffffff81421257>] cpuidle_enter+0x17/0x20 [<ffffffff810b3ebe>] cpu_startup_entry+0x3ce/0x420 [<ffffffff81048563>] start_secondary+0x233/0x2c0 ---[ end trace f15c3e33ba78d840 ]--- ------------[ cut here ]------------ Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: fix radar parameters initializationLorenzo Bianconi2-2/+5
Move ath9k_hw_set_radar_params() in ath9k_hw_reset() in order to avoid AR_PHY_RADAR registers are overwritten after hw reset Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix beacon miss handlingSujith Manoharan2-12/+33
The NoA duration for a GO is half the beacon interval and a concurrent context like a STA can be active only for that duration, before switching back to the GO's operating channel. Currently, when multiple beacons are missed, the dwell time for the STA context is extended to improve the chances of receiving a beacon. But the NoA is not updated and this will cause problems since the GO is offline for a period that is longer than the advertised duration. Fix this by ensuring that the NoA is updated first before extending the time slot for the STA context. Also make sure that non-periodic NoA is used for a one-time, longer absence period. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix channel switch time durationSujith Manoharan1-1/+1
Since the NoA duration is the maximum time the GO interface can be offline, it needs to include the time take to switch channels in the HW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Clear offchannel duration properlySujith Manoharan1-1/+4
Clearing the offchannel duration value in the scheduler unconditionally breaks NoA when multiple contexts are active and an offchannel request is deferred, for example, in a scan run. Fix this by clearing the duration only if there is no pending offchannel request. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix Notice of Absence issuesSujith Manoharan2-37/+75
* The index has to incremented only when advertising a new NoA schedule. * Switch to non-periodic NoA when starting a scan operation and multiple channel contexts are active. * Make sure that periodic NoA is advertised again when scan ends. Since the offchannel timer moves the offchannel state to IDLE after the GO operating channel becomes active, use a flag "force_noa_update" to update the NoA contents. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Assign offchannel duration properlySujith Manoharan1-2/+7
In multi-channel mode, an offchannel request will be deferred if both contexts are active. The duration of the offchannel operation is calculated but is not stored in the scheduler state. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11Revert "ath9k: Calculate sleep duration"Sujith Manoharan1-3/+2
This reverts commit 09ebb810927a110e4c354beb20308830d108a54b. ath9k_hw_set_sta_beacon_timers() configures AR_TIM_PERIOD with the beacon interval. Before this commit, the sleepduration was never greater than the beacon interval. But now, the behavior has changed. For example, with an AP that uses a beacon interval of 100: ath: phy9: next beacon 61128704 ath: phy9: beacon period 204800 ath: phy9: DTIM period 204800 If the sleepduration is calculated based on the listen time, then the bmiss threshold should also be changed since the HW would be in sleep state for a longer time, but that is not done currently. To avoid configuring a higher beacon interval based on the sleepduration, revert to the original behavior. Power consumption is not a problem since PS is disabled in ath9k anyway. Cc: stable@vger.kernel.org Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix MCC scanningSujith Manoharan2-1/+4
Scanning is curently broken when two channel contexts are active. For example in a P2P-GO/STA setup, the offchannel timer allows HZ / 10 to elapse before initiating a switch to the next scan channel from the current operating channel, which in this case would be the P2P-GO context. But, the channel context timer might decide to switch to the STA context when an SWBA comes early and a beacon is sent out. Since pending offchannel requests are processed in EVENT_BEACON_PREPARE, this causes inconsistent scanning. Fix this by making sure that a context switch happens before processing the pending offchannel request. This also makes sure that active channel contexts will always have higher priority than offchannel operations and the scan sequence looks like this: p2p-go, sta, p2p-go, offchannel, p2p-go, sta, p2p-go, offchannel,..... The oper-channel is p2p-go, so the STA context has to switch to p2p-go again before switching offchannel. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix offchannel operationSujith Manoharan1-0/+4
When multiple channel contexts are active, an offchannel request will not be handled immediately, but will be queued to be handled later. But, currently, the channel definition is not copied to the local offchannel state. This breaks operation like scanning when MCC is active. Fix this by storing the offchannel parameters properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Use a subroutine to assign HW queuesSujith Manoharan2-17/+18
Reduces code duplication. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix interface accountingSujith Manoharan7-10/+10
Currently, the interface count is maintained globally, but this causes problems in RX filter calculation. Make the interface count a per-channel-context variable to fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix RX filters in channel contextsSujith Manoharan3-8/+21
Maintain the RX filter on a per-channel-context basis and not globally. Not doing so was resulting in incorrect filter calculation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix COMP_BAR filterSujith Manoharan1-1/+1
ATH9K_RX_FILTER_COMP_BAR is used to receive BAR completion frames and is set if the current channel is HT. When channel contexts are enabled, instead of using the mac80211 helpers, check if the current channel definition is HT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix ath_startrecv()Sujith Manoharan3-12/+4
Since ath_startrecv() doesn't return an error value, cleanup the callsites. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix RX filter calculationSujith Manoharan1-1/+2
If multiple channel contexts are active, then the opmode can be different in each context. Since the RX filter is calculated in ath_startrecv() before switching to the new opmode, the wrong filters are chosen. Fix this by calling ath9k_calculate_summary_state() before the RX module is started. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Add CTWindow supportSujith Manoharan3-2/+31
Since CTWindow can be used for improving discoverability, fill this field in the NoA Attribute properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 16:20:58 +0300