summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ar9003_hw.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-11ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan1-11/+11
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Add and use initvals for channel 14Sujith Manoharan1-0/+2
This is missing for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Use correct RX gain table for AR9565Sujith Manoharan1-0/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix ASPM workaround usageSujith Manoharan1-6/+1
The PCIE Workaround register (AR_WA/0x4004) is used to handle various hardware quirks. For AR9002 chips, AR_WA_D3_L1_DISABLE is used to prevent the HW from automatically entering L1 state when D3 is enforced. AR_WA_D3_L1_DISABLE has to be enabled for a few AR9280 based cards, mark them based on their PCI subdevice/subvendor IDs and enforce it in ar9002_hw_configpcipowersave(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath9k: Fix ASPM for AR9462Sujith Manoharan1-0/+14
If the L1 entrance latency is not calibrated properly in the EEPROM in WB222 boards, there could be problems in connectivity. Check and correct the calibrated value if it doesn't match the optimal value for WB222, 4us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k: Add support for AR9485 1.2Sujith Manoharan1-9/+9
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k: Add mix tx gain table for AR9462 2.0Sujith Manoharan1-0/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Program initvals for AR9462 2.1Sujith Manoharan1-2/+57
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Program initvals for CUS217Sujith Manoharan1-0/+4
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add support for 5G-XLNA/AR9462Sujith Manoharan1-1/+17
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-23ath9k_hw: fix RF bank initializationFelix Fietkau1-1/+1
ar900*_init_mode_regs needs to be called before RF banks are allocated, otherwise the storage size of RF banks isn't known. This patch fixes a memory overrun that can show up as a crash on unloading the module. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11ath9k_hw: add tx gain tables for newer devicesFelix Fietkau1-18/+49
Improves stability on affected devices and also fixes the Tx IQ calibration related regression on some AR9340 devices such as the TP-Link TL-WDR4300. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-02ath9k_hw: Fix RX gain initvals for AR9485Sujith Manoharan1-1/+1
Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16ath9k_hw: Program filter coefficients correctlySujith Manoharan1-9/+13
2484 Mhz (Japan) usage requires filter coefficients to be programmed in the CCK TX FIR registers. This is required for AR9331, AR9485 and AR9462. Fix this and also remove a few useless macros and a duplicate variable. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k_hw: Enable hw PLL power save for AR9565Rajkumar Manoharan1-2/+2
This reduced the power consumption to half in full and network sleep. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k_hw: Enable hw PLL power save for AR9462Rajkumar Manoharan1-2/+2
This reduced the power consumption to half in full and network sleep. Cc: stable@vger.kernel.org Cc: Paul Stewart <pstew@chromium.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 initvalsSujith Manoharan1-5/+52
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: remove redundant arguments to INIT_INI_ARRAYFelix Fietkau1-395/+146
The row/column sizes can be derived from the array argument within the macro itself, which is less error prone. In a few cases the supplied column size was actually wrong. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: fix tx gain tables for AR934xFelix Fietkau1-6/+23
Use the EEPROM information to choose the right tx gain table Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10ath9k: add mode register initialization code for AR9550Gabor Juhos1-2/+84
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10ath9k: add initvals for AR9550Gabor Juhos1-0/+1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13ath9k_hw: Remove BTCOEX initvalsSujith Manoharan1-5/+0
The MAX_TXPWR table for BTCOEX is not needed for AR9462. Programming these values to the HW results in undesirable behavior - for example, large number of delimiter/data underruns are seen in AES-CCMP mode. Also, registers like AR_PCU_MISC_MODE2 return 0xdeadbeef after the BTCOEX_MAX power table is programmed to the HW, and frames being transmitted end up being looped back to the RX engine, an example being beacon frames in IBSS mode. Remove this table for now - this fixes CCMP performance and general IBSS usage. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: clean up iniModesAdditionalFelix Fietkau1-12/+13
use iniModesFastClock for 5 ghz fast clock specific settings, and iniAdditional for clock/chip specific initval overrides Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove AR9462 v1.0 supportSujith Manoharan1-85/+3
v1.0 chips are not available in the market. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k: Rename AR9480 into AR9462Rajkumar Manoharan1-91/+91
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Rename AR9480 -> AR9462 initvalsRajkumar Manoharan1-2/+2
The AR946/8x chips are 2x2 Dual band with BT support. In order to avoid misleading with other chips and to be in sync with marketing team's term, AR9480 is renamed as AR9462. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-17ath9k_hw: Add support for AR946/8x chipsets.Senthil Balasubramanian1-0/+191
This patch adds support for AR946/8x chipets. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-17ath9k_hw: Split tx/rx gain table initval handlingSenthil Balasubramanian1-180/+210
Split tx/rx gain table initval hanlding part so readability is better and easy to manage the code. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26ath9k_hw: add AR9580 supportLuis R. Rodriguez1-0/+81
Here are the AR9580 1.0 initvals checksums using the Atheros initvals-tools [1]. This is useful for when we udate the initvals again with other values. It ensures that we match the same initvals used internally. The tool is documented on the wiki [2]. $ ./initvals -f ar9580-1p0 0x00000000e912711f ar9580_1p0_modes_fast_clock 0x000000004a488fc7 ar9580_1p0_radio_postamble 0x00000000f3888b02 ar9580_1p0_baseband_core 0x0000000003f783bb ar9580_1p0_mac_postamble 0x0000000094be244a ar9580_1p0_low_ob_db_tx_gain_table 0x0000000094be244a ar9580_1p0_high_power_tx_gain_table 0x0000000090be244a ar9580_1p0_lowest_ob_db_tx_gain_table 0x00000000ed9eaac6 ar9580_1p0_baseband_core_txfir_coeff_japan_2484 0x00000000c4d66d1b ar9580_1p0_mac_core 0x00000000e8e9043a ar9580_1p0_mixed_ob_db_tx_gain_table 0x000000003521a300 ar9580_1p0_wo_xlna_rx_gain_table 0x00000000301fc841 ar9580_1p0_soc_postamble 0x00000000a9a06b3a ar9580_1p0_high_ob_db_tx_gain_table 0x00000000a15ccf1b ar9580_1p0_soc_preamble 0x0000000029495000 ar9580_1p0_rx_gain_table 0x0000000037ac0ee8 ar9580_1p0_radio_core 0x00000000603a1b80 ar9580_1p0_baseband_postamble 0x000000003d8b4396 ar9580_1p0_pcie_phy_clkreq_enable_L1 0x00000000398b4396 ar9580_1p0_pcie_phy_clkreq_disable_L1 0x00000000397b4396 ar9580_1p0_pcie_phy_pll_on_clkreq [1] git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/initvals-tool.git [2] http://wireless.kernel.org/en/users/Drivers/ath9k_hw/initvals-tool Cc: David Quan <dquan@qca.qualcomm.com> Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k: merge common ->config_pci_powersave() checksStanislaw Gruszka1-3/+0
Move common checks into wrapper function. Since ASPM can be only enabled on PCIe devices ->is_pciexpress check is unneeded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k: remove ->config_pci_powersave() redundant argumentStanislaw Gruszka1-3/+2
We always call ->config_pci_powersave() with both restore and power_off arguments equal to 0 or both equal to 1, so merge them into one argument. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabledStanislaw Gruszka1-5/+1
We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias <camilo@mesias.co.uk> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-23ath9k: initialize rx gain table for AR9330Gabor Juhos1-2/+22
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-23ath9k: initialize tx gain table for AR9330Gabor Juhos1-4/+44
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-23ath9k: initialize mode registers for AR9330Gabor Juhos1-1/+109
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Initialize tx and rx gain table from initvals.h for ar9340Vasanthakumar Thiagarajan1-6/+36
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_hw: Initialize mode registers from initvals.h for AR9340Vasanthakumar Thiagarajan1-1/+58
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k_hw: Use appropriate rx gain table for AR9485Vasanthakumar Thiagarajan1-4/+4
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove AR9485 1.0 supportLuis R. Rodriguez1-90/+0
Only AR9485 1.1 was sold. This debloats the driver by ~14 KiB. text data bss dec hex filename 300413 624 1056 302093 49c0d drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 310285 624 1056 311965 4c29d drivers/net/wireless/ath/ath9k/ath9k_hw-old.ko $ du -b ath9k_hw* 6210541 ath9k_hw.ko 6225089 ath9k_hw-old.ko Cc: Bill Wu <bill.wu@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Forbes Tsai <Forbes.Tsai@Atheros.com> Cc: Jesmine Chen <jesmine.chen@atheros.com> Cc: Marvian Chen <Hou-hua.Chen@Atheros.com> Cc: Vivek Natarajan <vivek.natarajan@atheros.com> Cc: Bernadette Yetso <bernadette.yetso@atheros.com> Cc: Sarvesh Shrivastava <sarvesh.shrivastava@atheros.com> Acked-by: Yi-Chen Su <yi-chen.su@atheros.com> Acked-by: Jeffrey Chung <jeffrey.chung@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k_hw: Fix pcie_serdes setting for AR9485 1.1 version.Vivek Natarajan1-4/+4
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-19ath9k_hw: Updates for AR9485 1.1 chipsets.Vivek Natarajan1-11/+101
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18ath9k_hw: ASPM interoperability fix for AR9380/AR9382Luis R. Rodriguez1-2/+2
There is an interoperability with AR9382/AR9380 in L1 state with a few root complexes which can cause a hang. This is fixed by setting some work around bits on the PCIE PHY. We fix by using a new ini array to modify these bits when the radio is idle. Cc: stable@kernel.org Cc: Jack Lee <jack.lee@atheros.com> Cc: Carl Huang <carl.huang@atheros.com> Cc: David Quan <david.quan@atheros.com> Cc: Nael Atallah <nael.atallah@atheros.com> Cc: Sarvesh Shrivastava <sarvesh.shrivastava@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13ath9k_hw: clean up SREV version checksFelix Fietkau1-13/+0
There's no need to have separate callbacks for pre-AR9003 vs AR9003 SREV version checks, so just merge those into one function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08ath9k_hw: Initialize tx/rx gain table from initvals.h for AR9485Vasanthakumar Thiagarajan1-20/+62
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08ath9k_hw: Initialize mode registers for AR9485Vasanthakumar Thiagarajan1-66/+129
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08ath9k_hw: Enable hw initialization for AR9485Vasanthakumar Thiagarajan1-0/+1
Also make it a supported mac Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15ath9k_hw: remove AR9003 2.0 supportLuis R. Rodriguez1-136/+26
These chipsets will not hit the market, all customers will be on >= AR9003 2.2. This shaves down the ath9k_hw size by 24161 bytes (24 KB) on my system. Before: $ size drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 292328 616 1824 294768 47f70 drivers/net/wireless/ath/ath9k/ath9k_hw.ko $ du -b drivers/net/wireless/ath/ath9k/ath9k_hw.ko 5987825 drivers/net/wireless/ath/ath9k/ath9k_hw.ko After: $ size drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 277192 616 1824 279632 44450 drivers/net/wireless/ath/ath9k/ath9k_hw.ko $ du -b drivers/net/wireless/ath/ath9k/ath9k_hw.ko 5963664 drivers/net/wireless/ath/ath9k/ath9k_hw.ko Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07ath9k_hw: merge ath9k_hw_ani_monitor_old and ath9k_hw_ani_monitor_newFelix Fietkau1-2/+0
After the last rounds of cleanup, these functions are now functionally equivalent and can thus be merged. Also get rid of some excessive (and redundant) debug messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 10:37:29 +0300