summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03net: usb: pegasus: fixes of set_register(s) return value evaluation;Petko Manolov1-2/+2
[ Upstream commit ffc9c3ebb4af870a121da99826e9ccb63dc8b3d7 ] - restore the behavior in enable_net_traffic() to avoid regressions - Jakub Kicinski; - hurried up and removed redundant assignment in pegasus_open() before yet another checker complains; Fixes: 8a160e2e9aeb ("net: usb: pegasus: Check the return value of get_geristers() and friends;") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26r8152: fix the maximum number of PLA bp for RTL8153CHayes Wang1-2/+19
[ Upstream commit 6633fb83f1faddbfcac09e35edcae96bd0468335 ] The maximum PLA bp number of RTL8153C is 16, not 8. That is, the bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26r8152: fix writing USB_BP2_ENHayes Wang1-1/+1
[ Upstream commit a876a33d2a1102f99fc782fefb784f4dd4841d8c ] The register of USB_BP2_EN is 16 bits, so we should use ocp_write_word(), not ocp_write_byte(). Fixes: 9370f2d05a2a ("support request_firmware for RTL8153") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: usb: asix: refactor asix_read_phy_addr() and handle errors on returnOleksij Rempel4-20/+34
[ Upstream commit 7e88b11a862afe59ee0c365123ea5fb96a26cb3b ] Refactor asix_read_phy_addr() to return usable error value directly and make sure all callers handle this error. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ] Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: usb: pegasus: Check the return value of get_geristers() and friends;Petko Manolov1-33/+75
[ Upstream commit 8a160e2e9aeb8318159b48701ad8a6e22274372d ] Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Reviewed-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: pegasus: fix uninit-value in get_interrupt_intervalPavel Skripkin1-3/+11
[ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ] Syzbot reported uninit value pegasus_probe(). The problem was in missing error handling. get_interrupt_interval() internally calls read_eprom_word() which can fail in some cases. For example: failed to receive usb control message. These cases should be handled to prevent uninit value bug, since read_eprom_word() will not initialize passed stack variable in case of internal failure. Fail log: BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0 ... Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x24c/0x2e0 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 .... Local variable ----data.i@pegasus_probe created at: get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08r8152: Fix a deadlock by doubly PM resumeTakashi Iwai1-9/+18
[ Upstream commit 776ac63a986d211286230c4fd70f85390eabedcd ] r8152 driver sets up the MAC address at reset-resume, while rtl8152_set_mac_address() has the temporary autopm get/put. This may lead to a deadlock as the PM lock has been already taken for the execution of the runtime PM callback. This patch adds the workaround to avoid the superfluous autpm when called from rtl8152_reset_resume(). Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08r8152: Fix potential PM refcount imbalanceTakashi Iwai1-1/+2
[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ] rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28usb: hso: fix error handling code of hso_create_net_deviceDongliang Mu1-10/+23
[ Upstream commit a6ecfb39ba9d7316057cea823b196b734f6b18ca ] The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-17net: cdc_eem: fix tx fixup skb leakLinyu Yuan1-1/+1
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)") Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16r8152: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook1-1/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: usb: fix possible use-after-free in smsc75xx_bindDongliang Mu1-4/+6
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15qmi_wwan: Do not call netif_rx from rx_fixupKristian Evensen1-1/+1
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is most of the time), usbnet_skb_return() is called (from rx_process()). usbnet_skb_return() will then call netif_rx() a second time for the same skb. Simplify the code and avoid the redundant netif_rx() call by changing qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH is set. We then leave it up to the existing infrastructure to call netif_rx(). Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: cdc_ncm: switch to eth%d interface namingMaciej Żenczykowski1-1/+1
This is meant to make the host side cdc_ncm interface consistently named just like the older CDC protocols: cdc_ether & cdc_ecm (and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'. include/linux/usb/usbnet.h: #define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ #define FLAG_WWAN 0x0400 /* use "wwan%d" names */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ drivers/net/usb/usbnet.c @ line 1711: strcpy (net->name, "usb%d"); ... // heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) strcpy(net->name, "wlan%d"); /* WWAN devices should always be named "wwan%d" */ if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); So by using ETHER | POINTTOPOINT the interface naming is either usb%d or eth%d based on the global uniqueness of the mac address of the device. Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm driver end up being called usb%d instead of eth%d even though they're definitely not two-host. (All 1gbps & 5gbps ethernet usb dongles I've tested don't hit this problem due to use of different drivers, primarily r8152 and aqc111) Fixes tag is based purely on git blame, and is really just here to make sure this hits LTS branches newer than v4.5. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind") Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: usb: fix memory leak in smsc75xx_bindPavel Skripkin1-2/+6
Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hso: fix control-request directionsJohan Hovold1-2/+2
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the tiocmset and rfkill requests which erroneously used usb_rcvctrlpipe(). Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24r8152: check the informaton of the deviceHayes Wang1-5/+37
Verify some fields of the USB descriptor to make sure the driver could be used by the device. Besides, remove the check of endpoint number in rtl8152_probe(). usb_find_common_endpoints() includes it. BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com Fixes: c2198943e33b ("r8152: search the configuration of vendor mode") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: hso: bail out on interrupt URB allocation failureJohan Hovold1-7/+7
Commit 31db0dbd7244 ("net: hso: check for allocation failure in hso_create_bulk_serial_device()") recently started returning an error when the driver fails to allocate resources for the interrupt endpoint and tiocmget functionality. For consistency let's bail out from probe also if the URB allocation fails. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: lan78xx: advertise tx software timestamping supportMarkus Bloechl1-0/+1
lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit(). Override .get_ts_info to also advertise this capability (SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool. Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: hso: check for allocation failure in hso_create_bulk_serial_device()Dan Carpenter1-19/+18
In current kernels, small allocations never actually fail so this patch shouldn't affect runtime. Originally this error handling code written with the idea that if the "serial->tiocmget" allocation failed, then we would continue operating instead of bailing out early. But in later years we added an unchecked dereference on the next line. serial->tiocmget->serial_state_notification = kzalloc(); ^^^^^^^^^^^^^^^^^^ Since these allocations are never going fail in real life, this is mostly a philosophical debate, but I think bailing out early is the correct behavior that the user would want. And generally it's safer to bail as soon an error happens. Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-15net: cdc_eem: fix URL to CDC EEM 1.0 specJonathan Davies1-1/+1
The old URL is no longer accessible. Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26net: hso: fix NULL-deref on disconnect regressionJohan Hovold1-1/+1
Commit 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister(). Fixes: 8a12f8836145 ("net: hso: fix null-ptr-deref during tty device unregistration") Cc: stable@vger.kernel.org Cc: Anirudh Rayabharam <mail@anirudhrb.com> Reported-by: Leonardo Antoniazzi <leoanto@aruba.it> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26r8152: remove some bit operationsHayes Wang1-7/+7
Remove DELL_TB_RX_AGG_BUG and LENOVO_MACPASSTHRU flags of rtl8152_flags. They are only set when initializing and wouldn't be change. It is enough to record them with variables. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23r8152: redefine REALTEK_USB_DEVICE macroHayes Wang1-35/+27
Redefine REALTEK_USB_DEVICE macro with USB_DEVICE_INTERFACE_CLASS and USB_DEVICE_AND_INTERFACE_INFO to simply the code. Although checkpatch.pl shows the following error, it is more readable. ERROR: Macros with complex values should be enclosed in parentheses Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23r8152: remove NCM mode from REALTEK_USB_DEVICE macroHayes Wang1-9/+0
The RTL8156 support CDC NCM mode. And users could set the configuration of the USB device between vendor and NCM mode dynamically by themselves. That is, the driver doesn't need to set vendor mode from NCM mode. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23r8152: replace return with break for ram code speedup mode timeoutHayes Wang1-1/+1
When the timeout occurs, we still have to run the following process for releasing patch request. Otherwise, the PHY would keep no link. Therefore, use break to stop the loop of loading firmware and release the patch request rather than return the function directly. Fixes: 4a51b0e8a014 ("r8152: support PHY firmware for RTL8156 series") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: search the configuration of vendor modeHayes Wang1-4/+35
The vendor mode is not always at config #1, so it is necessary to set the correct configuration number. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: support PHY firmware for RTL8156 seriesHayes Wang1-2/+561
Support new firmware type and method for RTL8156 series. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: support new chipsHayes Wang1-65/+2149
Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A and RTL8156B are the 2.5G ethernet. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: add help function to change mtuHayes Wang1-22/+31
The different chips may have different requests when changing mtu. Therefore, add a new help function of rtl_ops to change mtu. Besides, reset the tx/rx after changing mtu. Additionally, add mtu_to_size() and size_to_mtu() macros to simplify the code. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: adjust rtl8152_check_firmware functionHayes Wang1-22/+29
Use bits operations to record and check the firmware. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17r8152: set inter fram gap time depending on speedHayes Wang1-0/+28
Set the maximum inter frame gap time (144ns) for speed 10M/half and 100M/half. It improves the performance for those speeds. And, there is no effect for the other speeds. For 10M/half and 100M/half, the fast inter frame gap time let the device couldn't use the feature of the aggregation effectively, because the transfer would be completed fastly. Therefore, use the maximum value to improve the effect of the aggregation. However, you may not feel the improvement for fast CPUs, because they compensate for the effect of the aggregation. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-21/+12
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08net: hso: fix null-ptr-deref during tty device unregistrationAnirudh Rayabharam1-21/+12
Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. Fixes: 72dc1c096c705 ("HSO: add option hso driver") Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: cdc_ether: record speed in status methodGrant Grundler1-7/+20
Until very recently, the usbnet framework only had support functions for devices which reported the link speed by explicitly querying the PHY over a MDIO interface. However, the cdc_ether devices send notifications when the link state or link speeds change and do not expose the PHY (or modem) directly. Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly query state recorded by the cdc_ether driver were added in a previous patch. Instead of cdc_ether spewing the link speed into the dmesg buffer, record the link speed encoded in these notifications and tell the usbnet framework to use the new functions to get link speed/state. User space can now get the most recent link speed/state using ethtool. v4: added to series since cdc_ether uses same notifications as cdc_ncm driver. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: cdc_ncm: record speed in status methodOliver Neukum1-38/+17
Until very recently, the usbnet framework only had support functions for devices which reported the link speed by explicitly querying the PHY over a MDIO interface. However, the cdc_ncm devices send notifications when the link state or link speeds change and do not expose the PHY (or modem) directly. Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly query state recorded by the cdc_ncm driver were added in a previous patch. So instead of cdc_ncm spewing the link speed into the dmesg buffer, record the link speed encoded in these notifications and tell the usbnet framework to use the new functions to get link speed/state. Link speed/state is now available via ethtool. This is especially useful given all current RTL8156 devices emit a connection/speed status notification every 32ms and this would fill the dmesg buffer. This implementation replaces the one recently submitted in de658a195ee23ca6aaffe197d1d2ea040beea0a2 : "net: usb: cdc_ncm: don't spew notifications" v2: rebased on upstream v3: changed variable names v4: rewrote commit message Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Roland Dreier <roland@kernel.org> Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07usbnet: add method for reporting speed without MIIOliver Neukum1-0/+23
The old method for reporting link speed assumed a driver uses the generic phy (mii) MDIO read/write functions. CDC devices don't expose the phy. Add a primitive internal version reporting back directly what the CDC notification/status operations recorded. v2: rebased on upstream v3: changed names and made clear which units are used v4: moved hunks to correct patch; rewrote commmit messages Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Roland Dreier <roland@kernel.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Tested-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07usbnet: add _mii suffix to usbnet_set/get_link_ksettingsOliver Neukum9-26/+29
The generic functions assumed devices provided an MDIO interface (accessed via older mii code, not phylib). This is true only for genuine ethernet. Devices with a higher level of abstraction or based on different technologies do not have MDIO. To support this case, first rename the existing functions with _mii suffix. v2: rebased on changed upstream v3: changed names to clearly say that this does NOT use phylib v4: moved hunks to correct patch; reworded commmit messages Signed-off-by : Oliver Neukum <oneukum@suse.com> Tested-by: Roland Dreier <roland@kernel.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Tested-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-02net: usb: ax88179_178a: initialize local variables before usePhillip Potter1-2/+4
Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26net: usb: lan78xx: remove unused including <linux/version.h>Zheng Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-1/+6
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19r8152: limit the RX buffer size of RTL8153A for USB 2.0Hayes Wang1-1/+4
If the USB host controller is EHCI, the throughput is reduced from 300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to 32K. According to the EHCI spec, the maximum size of the qTD is 20K. Therefore, when the driver uses more than 20K buffer, the latency time of EHCI would be increased. And, it let the RTL8153A get worse throughput. However, the driver uses alloc_pages() for rx buffer, so I limit the rx buffer to 16K rather than 20K. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923 Fixes: ec5791c202ac ("r8152: separate the rx buffer size") Reported-by: Robert Davies <robdavies1977@gmail.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19net: cdc-phonet: fix data-interface release on probe failureJohan Hovold1-0/+2
Set the disconnected flag before releasing the data interface in case netdev registration fails to avoid having the disconnect callback try to deregister the never registered netdev (and trigger a WARN_ON()). Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19net: cdc_ncm: drop redundant driver-data assignmentJohan Hovold1-1/+0
The driver data for the data interface has already been set by usb_driver_claim_interface() so drop the subsequent redundant assignment. Note that this also avoids setting the driver data three times in case of a combined interface. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: usb: log errors to dmesg/syslogGrant Grundler1-1/+1
Errors in protocol should be logged when the driver aborts operations. If the driver can carry on and "humor" the device, then emitting the message as debug output level is fine. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: usb: cdc_ncm: emit dev_err on error pathsGrant Grundler1-5/+5
Several error paths in bind/probe code will only emit output using dev_dbg. But if we are going to fail the bind/probe, emit related output with "err" priority. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-05net: usb: qmi_wwan: allow qmimux add/del with master upDaniele Palmas1-14/+0
There's no reason for preventing the creation and removal of qmimux network interfaces when the underlying interface is up. This makes qmi_wwan mux implementation more similar to the rmnet one, simplifying userspace management of the same logical interfaces. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Reported-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"Hayes Wang1-29/+6
This reverts commit 134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8. The r8153_mac_clk_spd() is used for RTL8153A only, because the register table of RTL8153B is different from RTL8153A. However, this function would be called when RTL8153B calls r8153_first_init() and r8153_enter_oob(). That causes RTL8153B becomes unstable when suspending and resuming. The worst case may let the device stop working. Besides, revert this commit to disable MAC clock speed down for RTL8153A. It would avoid the known issue when enabling U1. The data of the first control transfer may be wrong when exiting U1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-24net: usb: qmi_wwan: support ZTE P685M modemLech Perczak1-0/+1
Now that interface 3 in "option" driver is no longer mapped, add device ID matching it to qmi_wwan. The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20210223183456.6377-1-lech.perczak@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-17 09:39:24 +0300