summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2010-12-17Merge branch 'master' of ↵David S. Miller2-6/+55
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c
2010-12-11phy: add the IC+ IP1001 driverGiuseppe CAVALLARO2-6/+55
This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver. I've had to add an additional delay (2ns) to adjust RX clock phase at GMII/ RGMII interface (according to the PHY data-sheet). This helps to have the RGMII working on some ST platforms. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09Merge branch 'master' of ↵David S. Miller1-13/+151
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
2010-11-28net: add some KERN_CONT markers to continuation linesUwe Kleine-König1-2/+2
Cc: netdev@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22of/phylib: Use device tree properties to initialize Marvell PHYs.David Daney1-0/+97
Some aspects of PHY initialization are board dependent, things like indicator LED connections and some clocking modes cannot be determined by probing. The dev_flags element of struct phy_device can be used to control these things if an appropriate value can be passed from the Ethernet driver. We run into problems however if the PHY connections are specified by the device tree. There is no way for the Ethernet driver to know what flags it should pass. If we are using the device tree, the struct phy_device will be populated with the device tree node corresponding to the PHY, and we can extract extra configuration information from there. The next question is what should the format of that information be? It is highly device specific, and the device tree representation should not be tied to any arbitrary kernel defined constants. A straight forward representation is just to specify the exact bits that should be set using the "marvell,reg-init" property: phy5: ethernet-phy@5 { reg = <5>; compatible = "marvell,88e1149r"; marvell,reg-init = /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */ <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */ /* mix %:0, led[0123]:drive low off hiZ */ <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */ /* default blink periods. */ <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */ /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */ <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */ }; phy6: ethernet-phy@6 { reg = <6>; compatible = "marvell,88e1118"; marvell,reg-init = /* Fix rx and tx clock transition timing */ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ /* Adjust LED drive. */ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ /* irq, blink-activity, blink-link */ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ }; The Marvell PHYs have a page select register at register 22 (0x16), we can specify any register by its page and register number. These are the first and second word. The third word contains a mask to be ANDed with the existing register value, and the fourth word is ORed with the result to yield the new register value. The new marvell_of_reg_init function leaves the page select register unchanged, so a call to it can be dropped into the .config_init functions without unduly affecting the state of the PHY. If CONFIG_OF_MDIO is not set, there is no of_node, or no "marvell,reg-init" property, the PHY initialization is unchanged. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Cyril Chemparathy <cyril@ti.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Add support for Marvell 88E1149R devices.David Daney1-0/+40
The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY. The .config_aneg function can be shared with 88E1118, but it needs its own .config_init. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Use common page register definition for Marvell PHYs.David Daney1-13/+14
The definition of the Marvell PHY page register is not specific to 88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it throughout. Suggested-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addrCyril Chemparathy1-9/+9
The marvell 88ec048's official part number is 88e1318s. This patch renames definitions in the driver to reflect this. In addition, a minor bug fix has been added to write back the MSCR1 register value properly. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25phylib: make local function staticstephen hemminger2-17/+15
The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21phy/marvell: fix 88e1121 supportArnaud Patard1-12/+19
Commit c477d0447db08068a497e7beb892b2b2a7bff64b added support for RGMII rx/tx delays except that it ends up clearing rx/tx delays bit for modes differents that RGMII*ID. Due to this, ethernet is not working anymore on my guruplug server +. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05don't let BCM63XX_PHY depend on non-existant symbolUwe Kleine-König1-1/+0
The kernel doesn't have a symbol called BCM63XX. There is a symbol BCM63XX_ENET (introduced in 9b1fc55a0500, 6 weeks after 09bb9aa0ed that introduced BCM63XX_PHY), but the driver compiles without that, too. Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net/phy: fix many "defined but unused" warningsUwe Kleine-König15-15/+15
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15phylib: fix PAL state machine restart on resumeSimon Guinot1-2/+2
On resume, before starting the PAL state machine, check if the adjust_link() method is well supplied. If not, this would lead to a NULL pointer dereference in the phy_state_machine() function. This scenario can happen if the Ethernet driver call manually the PHY functions instead of using the PAL state machine. The mv643xx_eth driver is a such example. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net/ipv4: Eliminate kstrdup memory leak net/caif/cfrfml.c: use asm/unaligned.h ax25: missplaced sock_put(sk) qlge: reset the chip before freeing the buffers l2tp: test for ethernet header in l2tp_eth_dev_recv() tcp: select(writefds) don't hang up when a peer close connection tcp: fix three tcp sysctls tuning tcp: Combat per-cpu skew in orphan tests. pxa168_eth: silence gcc warnings pxa168_eth: update call to phy_mii_ioctl() pxa168_eth: fix error handling in prope pxa168_eth: remove unneeded null check phylib: Fix race between returning phydev and calling adjust_link caif-driver: add HAS_DMA dependency 3c59x: Fix deadlock between boomerang_interrupt and boomerang_start_tx qlcnic: fix poll implementation netxen: fix poll implementation bridge: netfilter: fix a memory leak
2010-08-25phylib: Fix race between returning phydev and calling adjust_linkAnton Vorontsov1-0/+2
It is possible that phylib will call adjust_link before returning from {,of_}phy_connect(), which may cause the following [very rare, though] oops upon reopening the device: Unable to handle kernel paging request for data at address 0x0000024c Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0 P1021 RDB Modules linked in: NIP: c0345dac LR: c0345dac CTR: c0345d84 TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0 [...] NIP [c0345dac] adjust_link+0x28/0x19c LR [c0345dac] adjust_link+0x28/0x19c Call Trace: [c0d25f00] [000045e1] 0x45e1 (unreliable) [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554 [...] Here is why. Drivers store phydev in their private structures, e.g. gianfar driver: static int init_phy(struct net_device *dev) { ... priv->phydev = of_phy_connect(...); ... } So that adjust_link could retrieve it back: static void adjust_link(struct net_device *dev) { ... struct phy_device *phydev = priv->phydev; ... } If the device has been opened before, then phydev->state is set to PHY_HALTED (or undefined if the driver didn't call phy_stop()). Now, phy_connect starts the PHY state machine before returning phydev to the driver: phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; The time between 'phy_start_machine()' and 'return phydev' is undefined. The start machine routine delays execution for 1 second, which is enough for most cases. But under heavy load, or if you're unlucky, it is quite possible that PHY state machine will execute before phy_connect() returns, and so adjust_link callback will try to dereference phydev, which is not yet ready. To fix the issue, simply initialize the PHY's state to PHY_READY during phy_attach(). This will ensure that phylib won't call adjust_link before phy_start(). Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-12phylib: available for any speed ethernetRandy Dunlap1-1/+1
Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR, UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC, and OCTEON_ETHERNET) select PHYLIB. These drivers are not under NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant parts are omitted): warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET) PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies to be NETDEVICES instead of NET_ETHERNET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10phy.c: fix kernel-doc warningsRandy Dunlap1-1/+1
Fix phy.c kernel-doc notation: Warning(drivers/net/phy/phy.c:313): No description found for parameter 'ifr' Warning(drivers/net/phy/phy.c:313): Excess function parameter 'mii_data' description in 'phy_mii_ioctl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely1-2/+2
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds7-38/+270
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-08-04phy/marvell: add 88ec048 supportCyril Chemparathy1-0/+42
Marvell 88ec048 is a derivative of its 88e1121r device. From the programmer's perspective, the one major difference is the addition of an additional control bit in Page 2 Register 16 - used to control the padding of odd nibble preambles. This patch adds support for this new device, while inheriting as much code as possible from the existing 88e1121r implementation. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03phy/marvell: add 88e1121 interface mode supportCyril Chemparathy1-3/+32
This patch adds support for RGMII RX/TX delay configuration on marvell 88e1121 and derivatives. With this patch, PHY_INTERFACE_MODE_RGMII_*ID modes are now supported on these devices. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21phy: add suspend/resume in the ic+Giuseppe Cavallaro1-0/+2
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net: support time stamping in phy devices.Richard Cochran2-0/+7
This patch adds a new networking option to allow hardware time stamps from PHY devices. When enabled, likely candidates among incoming and outgoing network packets are offered to the PHY driver for possible time stamping. When accepted by the PHY driver, incoming packets are deferred for later delivery by the driver. The patch also adds phylib driver methods for the SIOCSHWTSTAMP ioctl and callbacks for transmit and receive time stamping. Drivers may optionally implement these functions. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19net: preserve ifreq parameter when calling generic phy_mii_ioctl().Richard Cochran1-1/+2
The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-17net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flagBenjamin Herrenschmidt1-18/+20
This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h along with dev_flags definitions for use by the driver. I then added a flag that changes the PHY init code to setup the LEDs config to the values needed to operate a dns323 rev C1 NAS. I moved the existing "resistance" flag to the .h as well, though I've been unable to find whoever sets this to convert it to use that constant. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-08Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-06-29micrel phy driver - updated(1)Choi, David1-19/+148
Hello all: This patch fixes what Ben mentioned, namely duplicated ids. From: David J. Choi <david.choi@micrel.com> Body of the explanation: This patch has changes as followings; -support the interrupt from phy devices from Micrel Inc. -support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel. -remove vsc8201 because this device was used only internal test at Micrel. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29netdev: mdio-octeon: Fix section mismatch errors.David Daney1-3/+3
We started getting: WARNING: vmlinux.o(.data+0x20bd0): Section mismatch in reference from the variable octeon_mdiobus_driver to the function .init.text:octeon_mdiobus_probe() This fixes it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-27phylib: Add autoload support for the LXT973 phy.David Woodhouse1-0/+1
Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID but neglected to also add it to the MODULE_DEVICE_TABLE. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25broadcom: Add 5241 supportDmitry Baryshkov1-0/+22
This patch adds the 5241 PHY ID to the broadcom module. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25broadcom: move all PHY_ID's to headerDmitry Baryshkov1-12/+12
Move all PHY IDs to brcmphy.h header for completeness and unification of code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10phylib: Add support for the LXT973 phy.Richard Cochran1-1/+50
This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely21-14/+319
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely1-2/+5
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-19of: Always use 'struct device.of_node' to get device node pointer.Grant Likely1-3/+3
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches1-3/+0
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12Merge branch 'master' of ↵David S. Miller2-0/+11
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ar9170/usb.c drivers/scsi/iscsi_tcp.c net/ipv4/ipmr.c
2010-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix FDDI and TR config checks in ipv4 arp and LLC. IPv4: unresolved multicast route cleanup mac80211: remove association work when processing deauth request ar9170: wait for asynchronous firmware loading ipv4: udp: fix short packet and bad checksum logging phy: Fix initialization in micrel driver. sctp: Fix a race between ICMP protocol unreachable and connect() veth: Dont kfree_skb() after dev_forward_skb() IPv6: fix IPV6_RECVERR handling of locally-generated errors net/gianfar: drop recycled skbs on MTU change iwlwifi: work around passive scan issue
2010-05-06phy: Fix initialization in micrel driver.David S. Miller1-0/+1
Missing name string in ks8001_driver, so we crash on register. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds3-0/+110
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: FEC: Fix kernel panic in fec_set_mac_address. ipv6: Fix default multicast hops setting. net: ep93xx_eth stops receiving packets drivers/net/phy: micrel phy driver dm9601: fix phy/eeprom write routine ppp_generic: handle non-linear skbs when passing them to pppd ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid net: fix compile error due to double return type in SOCK_DEBUG net/usb: initiate sync sequence in sierra_net.c driver net/usb: remove default in Kconfig for sierra_net driver r8169: Fix rtl8169_rx_interrupt() e1000e: Fix oops caused by ASPM patch. net/sb1250: register mdio bus in probe sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4) p54pci: fix bugs in p54p_check_tx_ring
2010-05-04phy/micrel: Add module device ID table for autoloading.David S. Miller1-0/+9
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-04Merge branch 'master' of ↵David S. Miller3-0/+110
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-05-04drivers/net/phy: micrel phy driverDavid J. Choi3-0/+110
This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-30NET: mdio-octeon: Enable the hardware before using it.David Daney1-0/+10
In some cases the mdio bus is not enabled at the time of probing. This prevents anything from working, so we will enable it before trying to use it, and disable it when the driver is removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1090/ Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-13PHY: fix typo in bcm63xx PHY driver tableFlorian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12Merge branch 'master' of ↵David S. Miller11-9/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03phylib: Add module table to all existing phy driversDavid Woodhouse14-0/+124
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03phylib: Support phy module autoloadingDavid Woodhouse1-0/+12
We don't use the normal hotplug mechanism because it doesn't work. It will load the module some time after the device appears, but that's not good enough for us -- we need the driver loaded _immediately_ because otherwise the NIC driver may just abort and then the phy 'device' goes away. [bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo11-9/+2
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 02:30:13 +0300