summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2025-07-24i40e: use libie adminq descriptorsMichal Swiatkowski12-650/+482
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow clean build. Get version descriptor is a little less detailed on i40e. To not mess up with shifting or union inside libie desc use get version descriptor from i40e. Move additional caps for i40e to libie. Fix RCT in declaration that is using libie_aq_desc; Use libie_aq_raw() wherever it can be used. The libie aq error is extended, cover it in ice driver just to clean build. In next patches the libie code for that will be used in each of intel driver. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24ixgbe: use libie adminq descriptorsMichal Swiatkowski5-367/+151
Use libie_aq_desc instead of ixgbe_aci_desc. Do needed changes to allow clean build. Move additional caps used in ixgbe to libie. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24ice, libie: move generic adminq descriptors to libMichal Swiatkowski24-649/+400
The descriptor structure is the same in ice, ixgbe and i40e. Move it to common libie header to use it across different driver. Leave device specific adminq commands in separate folders. This lead to a change that need to be done in filling/getting descriptor: - previous: struct specific_desc *cmd; cmd = &desc.params.specific_desc; - now: struct specific_desc *cmd; cmd = libie_aq_raw(&desc); Do this changes across the driver to allow clean build. The casting only have to be done in case of specific descriptors, for generic one union can still be used. Changes beside code moving: - change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too) - remove shift variables not otherwise needed (in libie_aq_flags) - fill/get descriptor data based on desc.params.raw whenever the descriptor isn't defined in libie - move defines from the libie_aq_sth structure outside - add libie_aq_raw helper and use it instead of explicit casting Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24net: ti: icssg-prueth: access ->pp through netmem_desc instead of pageByungchul Park1-2/+2
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make icssg-prueth access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24mlx5: access ->pp through netmem_desc instead of pageByungchul Park1-1/+2
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mlx5 access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-11-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24idpf: access ->pp through netmem_desc instead of pageByungchul Park1-3/+5
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make idpf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-10-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24iavf: access ->pp through netmem_desc instead of pageByungchul Park1-1/+1
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make iavf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-9-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24octeontx2-pf: access ->pp through netmem_desc instead of pageByungchul Park1-1/+1
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make octeontx2-pf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-8-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24net: fec: access ->pp through netmem_desc instead of pageByungchul Park1-3/+7
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make fec access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-7-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24netmem, mlx4: access ->pp_ref_count through netmem_desc instead of pageByungchul Park1-1/+3
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mlx4 access ->pp_ref_count through netmem_desc instead of page. While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(), that can be used to get netmem_desc from page only if it's a pp page. For now that netmem_desc overlays on page, it can be achieved by just casting, and use macro and _Generic to cover const casting as well. Plus, change page_pool_page_is_pp() to check for 'const struct page *' instead of 'struct page *' since it doesn't modify data and additionally covers const type. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23Merge branch 'mlx5-next' of ↵Jakub Kicinski1-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Tariq Toukan says: ==================== mlx5-next updates 2025-07-22 The following pull-request contains common mlx5 updates * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Expose cable_length field in PFCC register net/mlx5: Add IFC bits and enums for buf_ownership net/mlx5: Add IFC bits to support RSS for IPSec offload ==================== Link: https://patch.msgid.link/1753175048-330044-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23net/mlx5e: Remove duplicate mkey from SHAMPO headerLama Kayal3-12/+20
SHAMPO structure holds two variations of the mkey, which is unnecessary, a duplication that's repeated per rq. Remove duplicate mkey information and keep only one version, the one used in the fast path, rename field to reflect field type clearly. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1753081999-326247-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23net/mlx5e: SHAMPO, Remove mlx5e_shampo_get_log_hd_entry_size()Lama Kayal3-10/+3
Refactor mlx5e_shampo_get_log_hd_entry_size() as macro, for more simplicity. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1753081999-326247-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23net/mlx5e: SHAMPO, Cleanup reservation size formulaLama Kayal3-29/+16
The reservation size formula can be reduced to a simple evaluation of MLX5E_SHAMPO_WQ_RESRV_SIZE. This leaves mlx5e_shampo_get_log_rsrv_size() with one single use, which can be replaced with a macro for simplicity. Also, function mlx5e_shampo_get_log_rsrv_size() is used only throughout params.c, make it static. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1753081999-326247-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22Octeontx2-af: Debugfs support for firmware dataHariprasad Kelam2-1/+168
MAC address, Link modes (supported and advertised) and eeprom data for the Netdev interface are read from the shared firmware data. This patch adds debugfs support for the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250720163638.1560323-5-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: RPM: Update DMA maskHariprasad Kelam1-0/+6
CGX/RPM driver supports 48 bits of DMA addressing. Update the DMA mask accordingly. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-4-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Disable stale DMAC filtersSubbaraya Sundeep1-0/+13
During driver initialization disable stale DMAC filters in CGX/RPM set by firmware. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-3-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Add programmed macaddr to RVU pfvfHariprasad Kelam1-14/+9
Octeontx2/CN10k MAC block supports DMAC filters. DMAC filters can be installed on the interface through ethtool. When a user installs a DMAC filter, the interface's MAC address is implicitly added to the filter list. To ensure consistency, this MAC address must be kept in sync with the pfvf->mac_addr field, which is used to install MAC-based NPC rules. This patch updates the pfvf->mac_addr field with the programmed MAC address and also enables VF interfaces to install DMAC filters. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-2-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22ibmveth: Add multi buffers rx replenishment hcall supportMingming Cao2-68/+173
This patch enables batched RX buffer replenishment in ibmveth by using the new firmware-supported h_add_logical_lan_buffers() hcall to submit up to 8 RX buffers in a single call, instead of repeatedly calling the single-buffer h_add_logical_lan_buffer() hcall. During the probe, with the patch, the driver queries ILLAN attributes to detect IBMVETH_ILLAN_RX_MULTI_BUFF_SUPPORT bit. If the attribute is present, rx_buffers_per_hcall is set to 8, enabling batched replenishment. Otherwise, it defaults to 1, preserving the original upstream behavior with no change in code flow for unsupported systems. The core rx replenish logic remains the same. But when batching is enabled, the driver aggregates up to 8 fully prepared descriptors into a single h_add_logical_lan_buffers() hypercall. If any allocation or DMA mapping fails while preparing a batch, only the successfully prepared buffers are submitted, and the remaining are deferred for the next replenish cycle. If at runtime the firmware stops accepting the batched hcall—e,g, after a Live Partition Migration (LPM) to a host that does not support h_add_logical_lan_buffers(), the hypercall returns H_FUNCTION. In that case, the driver transparently disables batching, resets rx_buffers_per_hcall to 1, and falls back to the single-buffer hcall in next future replenishments to take care of these and future buffers. Test were done on systems with firmware that both supports and does not support the new h_add_logical_lan_buffers hcall. On supported firmware, this reduces hypercall overhead significantly over multiple buffers. SAR measurements showed about a 15% improvement in packet processing rate under moderate RX load, with heavier traffic seeing gains more than 30% Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250719091356.57252-1-mmc@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: implement DQO RX datapath and control path for AF_XDP zero-copyJoshua Washington4-14/+149
Add the RX datapath for AF_XDP zero-copy for DQ RDA. The RX path is quite similar to that of the normal XDP case. Parallel methods are introduced to properly handle XSKs instead of normal driver buffers. To properly support posting from XSKs, queues are destroyed and recreated, as the driver was initially making use of page pool buffers instead of the XSK pool memory. Expose support for AF_XDP zero-copy, as the TX and RX datapaths both exist. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-6-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: implement DQO TX datapath for AF_XDP zero-copyJoshua Washington4-3/+171
In the descriptor clean path, a number of changes need to be made to accommodate out of order completions and double completions. The XSK stack can only handle completions being processed in order, as a single counter is incremented in xsk_tx_completed to sigify how many XSK descriptors have been completed. Because completions can come back out of order in DQ, a separate queue of XSK descriptors must be maintained. This queue keeps the pending packets in the order that they were written so that the descriptors can be counted in xsk_tx_completed in the same order. For double completions, a new pending packet state and type are introduced. The new type, GVE_TX_PENDING_PACKET_DQO_XSK, plays an anlogous role to pre-existing _SKB and _XDP_FRAME pending packet types for XSK descriptors. The new state, GVE_PACKET_STATE_XSK_COMPLETE, represents packets for which no more completions are expected. This includes packets which have received a packet completion or reinjection completion, as well as packets whose reinjection completion timer have timed out. At this point, such packets can be counted as part of xsk_tx_completed() and freed. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-5-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: keep registry of zc xsk pools in netdev_privJoshua Washington2-4/+34
Relying on xsk_get_pool_from_qid for getting whether zero copy is enabled on a queue is erroneous, as an XSK pool is registered in xp_assign_dev whether AF_XDP zero-copy is enabled or not. This becomes problematic when queues are restarted in copy mode, as all RX queues with XSKs will register a pool, causing the driver to exercise the zero-copy codepath. This patch adds a bitmap to keep track of which queues have zero-copy enabled. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-4-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: merge xdp and xsk registrationJoshua Washington2-18/+10
The existence of both of these xdp_rxq and xsk_rxq is redundant. xdp_rxq can be used in both the zero-copy mode and the copy mode case. XSK pool memory model registration is prioritized over normal memory model registration to ensure that memory model registration happens only once per queue. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-3-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: deduplicate xdp info and xsk pool registration logicJoshua Washington1-86/+83
The XDP registration path currently has a lot of reused logic, leading changes to the codepaths to be unnecessarily complex. gve_reg_xsk_pool extracts the logic of registering an XSK pool with a queue into a method that can be used by both XDP_SETUP_XSK_POOL and gve_reg_xdp_info. gve_unreg_xdp_info is used to undo XDP info registration in the error path instead of explicitly unregistering the XDP info, as it is more complete and idempotent. This patch will be followed by other changes to the XDP registration logic, and will simplify those changes due to the use of common methods. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-2-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Merge branch '200GbE' of ↵Jakub Kicinski31-195/+1122
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-07-18 (idpf, ice, igc, igbvf, ixgbevf) For idpf: Ahmed and Sudheer add support for flow steering via ntuple filters. Current support is for IPv4 and TCP/UDP only. Milena adds support for cross timestamping. Ahmed preserves coalesce settings across resets. For ice: Alex adds reporting of 40GbE speed in devlink port split. Dawid adds support for E835 devices. Jesse refactors profile ptype processing for cleaner, more readable, code. Dave adds a couple of helper functions for LAG to reduce code duplication. For igc: Siang adds support to configure "Default Queue" during runtime using ethtool's Network Flow Classification (NFC) wildcard rule approach. For igbvf: Yuto Ohnuki removes unused fields from igbvf_adapter. For ixgbevf: Yuto Ohnuki removes unused fields from ixgbevf_adapter. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbevf: remove unused fields from struct ixgbevf_adapter igbvf: remove unused fields from struct igbvf_adapter igc: Add wildcard rule support to ethtool NFC using Default Queue igc: Relocate RSS field definitions to igc_defines.h ice: breakout common LAG code into helpers ice: convert ice_add_prof() to bitmap ice: add E835 device IDs ice: add 40G speed to Admin Command GET PORT OPTION idpf: preserve coalescing settings across resets idpf: add cross timestamping idpf: add flow steering support virtchnl2: add flow steering support virtchnl2: rename enum virtchnl2_cap_rss ==================== Link: https://patch.msgid.link/20250718185118.2042772-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: stmmac: dwmac-renesas-gbeth: Add PM suspend/resume callbacksBiju Das1-0/+1
Add PM suspend/resume callbacks for RZ/G3E SMARC EVK. The PM deep entry is executed by pressing the SLEEP button and exit from entry is by pressing the power button. Logs: root@smarc-rzg3e:~# PM: suspend entry (deep) Filesystems sync: 0.115 seconds Freezing user space processes Freezing user space processes completed (elapsed 0.002 seconds) OOM killer disabled. Freezing remaining freezable tasks Freezing remaining freezable tasks completed (elapsed 0.001 seconds) printk: Suspending console(s) (use no_console_suspend to debug) NOTICE: BL2: v2.10.5(release):2.10.5/rz_soc_dev-162-g7148ba838 NOTICE: BL2: Built : 14:23:58, Jul 5 2025 NOTICE: BL2: SYS_LSI_MODE: 0x13e06 NOTICE: BL2: SYS_LSI_DEVID: 0x8679447 NOTICE: BL2: SYS_LSI_PRR: 0x0 NOTICE: BL2: Booting BL31 renesas-gbeth 15c30000.ethernet end0: Link is Down Disabling non-boot CPUs ... psci: CPU3 killed (polled 0 ms) psci: CPU2 killed (polled 0 ms) psci: CPU1 killed (polled 0 ms) Enabling non-boot CPUs ... Detected VIPT I-cache on CPU1 GICv3: CPU1: found redistributor 100 region 0:0x0000000014960000 CPU1: Booted secondary processor 0x0000000100 [0x412fd050] CPU1 is up Detected VIPT I-cache on CPU2 GICv3: CPU2: found redistributor 200 region 0:0x0000000014980000 CPU2: Booted secondary processor 0x0000000200 [0x412fd050] CPU2 is up Detected VIPT I-cache on CPU3 GICv3: CPU3: found redistributor 300 region 0:0x00000000149a0000 CPU3: Booted secondary processor 0x0000000300 [0x412fd050] CPU3 is up dwmac4: Master AXI performs fixed burst length 15c30000.ethernet end0: No Safety Features support found 15c30000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported 15c30000.ethernet end0: configuring for phy/rgmii-id link mode dwmac4: Master AXI performs fixed burst length 15c40000.ethernet end1: No Safety Features support found 15c40000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported 15c40000.ethernet end1: configuring for phy/rgmii-id link mode OOM killer enabled. Restarting tasks: Starting Restarting tasks: Done random: crng reseeded on system resumption PM: suspend exit 15c30000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx root@smarc-rzg3e:~# ifconfig end0 192.168.10.7 up root@smarc-rzg3e:~# ping 192.168.10.1 PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data. 64 bytes from 192.168.10.1: icmp_seq=1 ttl=64 time=2.05 ms 64 bytes from 192.168.10.1: icmp_seq=2 ttl=64 time=0.928 ms Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250717071109.8213-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22amd-xgbe: add hardware PTP timestamping supportRaju Rangoju6-86/+179
Adds complete support for hardware-based PTP (IEEE 1588) timestamping to the AMD XGBE driver. - Initialize and configure the MAC PTP registers based on link speed and reference clock. - Support both 50MHz and 125MHz PTP reference clocks. - Update the driver interface and version data to support PTP clock frequency selection. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-3-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22and-xgbe: remove the abstraction for hwptpRaju Rangoju6-331/+345
Remove the hwptp abstraction and associated callbacks from the struct xgbe_hw_if {}. The callback structure was only ever assigned a single function, without null checks. This cleanup inlines the logic and moves all the hwtstamp realted code a separate file, improving readability and maintainance. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-2-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-20net/mlx5: Add IFC bits to support RSS for IPSec offloadJianbo Liu1-5/+8
This adds the capabilities, ipsec_next_header and inner/outer l4_type_ext fields to support RSS for the decrypted packets. These fields are specifically for firmware steering. HWS validation logic is updated to correctly handle the changes, ensuring the unsupported fields are not set. Besides, reserved_at_c4 is fixed to reserved_at_d4 to reflect the accurate offset within the structure. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1752734895-257735-2-git-send-email-tariqt@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-19be2net: Use correct byte order and format string for TCP seq and ack_seqAlok Tiwari1-4/+4
The TCP header fields seq and ack_seq are 32-bit values in network byte order as (__be32). these fields were earlier printed using ntohs(), which converts only 16-bit values and produces incorrect results for 32-bit fields. This patch is changeing the conversion to ntohl(), ensuring correct interpretation of these sequence numbers. Notably, the format specifier is updated from %d to %u to reflect the unsigned nature of these fields. improves the accuracy of debug log messages for TCP sequence and acknowledgment numbers during TX timeouts. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: bcmasp: Add support for re-starting auto-negotiationFlorian Fainelli1-0/+1
Wire-up ethtool_ops::nway_reset to phy_ethtool_nway_reset in order to support re-starting auto-negotiation. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250717180915.2611890-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_close_many/netif_close_many/Stanislav Fomichev1-1/+2
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. netif_close_many is used only by vlan/dsa and one mtk driver, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-8-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_set_threaded/netif_set_threaded/Stanislav Fomichev3-3/+3
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Note that one dev_set_threaded call still remains in mt76 for debugfs file. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-7-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_get_port_parent_id/netif_get_port_parent_id/Stanislav Fomichev1-1/+1
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18ixgbevf: remove unused fields from struct ixgbevf_adapterYuto Ohnuki1-3/+0
Remove hw_rx_no_dma_resources and eitr_param fields from struct ixgbevf_adapter since these fields are never referenced in the driver. Note that the interrupt throttle rate is controlled by the rx_itr_setting and tx_itr_setting variables. This change simplifies the ixgbevf driver by removing unused fields, which improves maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igbvf: remove unused fields from struct igbvf_adapterYuto Ohnuki2-32/+0
Remove following unused fields from struct igbvf_adapter that are never referenced in the driver. - blink_timer - eeprom_wol - fc_autoneg - int_mode - led_status - mng_vlan_id - polling_interval - rx_dma_failed - test_icr - test_rx_ring - test_tx_ring - tx_dma_failed - tx_fifo_head - tx_fifo_size - tx_head_addr Also removed the following fields from struct igbvf_adapter since they are never read or used after initialization by igbvf_probe() and igbvf_sw_init(). - bd_number - rx_abs_int_delay - tx_abs_int_delay - rx_int_delay - tx_int_delay This changes simplify the igbvf driver by removing unused fields, which improves maintenability. Tested-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igc: Add wildcard rule support to ethtool NFC using Default QueueSong Yoong Siang4-3/+49
Introduce support for a lowest priority wildcard (catch-all) rule in ethtool's Network Flow Classification (NFC) for the igc driver. The wildcard rule directs all unmatched network traffic, including traffic not captured by Receive Side Scaling (RSS), to a specified queue. This functionality utilizes the Default Queue feature available in I225/I226 hardware. The implementation has been validated on Intel ADL-S systems with two back-to-back connected I226 network interfaces. Testing Procedure: 1. On the Device Under Test (DUT), verify the initial statistic: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 0 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 2. From the Link Partner, send 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 3. On the DUT, verify the packet reception on Queue 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 4. On the DUT, add a wildcard rule to route all packets to Queue 3: $ sudo ethtool -N enp1s0 flow-type ether queue 3 5. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 6. Now, packets are routed to Queue 3 by the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 10 7. On the DUT, add a EtherType rule to route ARP packet to Queue 1: $ sudo ethtool -N enp1s0 flow-type ether proto 0x0806 queue 1 8. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 9. Now, packets are routed to Queue 1 by the EtherType rule because it is higher priority than the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 10. On the DUT, delete all the NFC rules: $ sudo ethtool -N enp1s0 delete 63 $ sudo ethtool -N enp1s0 delete 64 11. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 12. Now, packets are routed to Queue 0 because the value of Default Queue is reset back to 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 20 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Co-developed-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igc: Relocate RSS field definitions to igc_defines.hSong Yoong Siang2-4/+3
Move the RSS field definitions related to IPv4 and IPv6 UDP from igc.h to igc_defines.h to consolidate the RSS field definitions in a single header file, improving code organization and maintainability. This refactoring does not alter the functionality of the driver but enhances the logical grouping of related constants Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: breakout common LAG code into helpersDave Ertman4-35/+51
In the VF handling code, parts of the code for lag can be broken out into helper functions to reduce code duplication. Break this code out into helper functions Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: convert ice_add_prof() to bitmapJesse Brandeburg3-55/+34
Previously the ice_add_prof() took an array of u8 and looped over it with for_each_set_bit(), examining each 8 bit value as a bitmap. This was just hard to understand and unnecessary, and was triggering undefined behavior sanitizers with unaligned accesses within bitmap fields (on our internal tools/builds). Since the @ptype being passed in was already declared as a bitmap, refactor this to use native types with the advantage of simplifying the code to use a single loop. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> CC: Jesse Brandeburg <jbrandeburg@cloudflare.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: add E835 device IDsDawid Osuchowski3-0/+36
E835 is an enhanced version of the E830. It continues to use the same set of commands, registers and interfaces as other devices in the 800 Series. Following device IDs are added: - 0x1248: Intel(R) Ethernet Controller E835-CC for backplane - 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP - 0x124A: Intel(R) Ethernet Controller E835-CC for SFP - 0x1261: Intel(R) Ethernet Controller E835-C for backplane - 0x1262: Intel(R) Ethernet Controller E835-C for QSFP - 0x1263: Intel(R) Ethernet Controller E835-C for SFP - 0x1265: Intel(R) Ethernet Controller E835-L for backplane - 0x1266: Intel(R) Ethernet Controller E835-L for QSFP - 0x1267: Intel(R) Ethernet Controller E835-L for SFP Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: add 40G speed to Admin Command GET PORT OPTIONAleksandr Loktionov4-2/+6
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code to process this new option in both the devlink and the Admin Queue Command GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on. This feature allows the driver to correctly report configuration options for 2x40G on E823 and other cards in the future via devlink. Example command: devlink port split pci/0000:01:00.0/0 count 2 Example dmesg: ice 0000:01:00.0: Available port split options and max port speeds (Gbps): ice 0000:01:00.0: Status Split Quad 0 Quad 1 ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 ice 0000:01:00.0: 2 40 - - - 40 - - - ice 0000:01:00.0: 2 50 - 50 - - - - - ice 0000:01:00.0: 4 25 25 25 25 - - - - ice 0000:01:00.0: 4 25 25 - - 25 25 - - ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10 ice 0000:01:00.0: 1 100 - - - - - - - Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18idpf: preserve coalescing settings across resetsAhmed Zaki5-13/+74
The IRQ coalescing config currently reside only inside struct idpf_q_vector. However, all idpf_q_vector structs are de-allocated and re-allocated during resets. This leads to user-set coalesce configuration to be lost. Add new fields to struct idpf_vport_user_config_data to save the user settings and re-apply them after reset. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18idpf: add cross timestampingMilena Olech3-1/+207
Add cross timestamp support through virtchnl mailbox messages and directly, through PCIe BAR registers. Cross timestamping assumes that both system time and device clock time values are cached simultaneously, what is triggered by HW. Feature is enabled for both ARM and x86 archs. Signed-off-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18idpf: add flow steering supportAhmed Zaki5-5/+425
Use the new virtchnl2 OP codes to communicate with the Control Plane to add flow steering filters. We add the basic functionality for add/delete with TCP/UDP IPv4 only. Support for other OP codes and protocols will be added later. Standard 'ethtool -N|--config-ntuple' should be used, for example: # ethtool -N ens801f0d1 flow-type tcp4 src-ip 10.0.0.1 action 6 to route all IPv4/TCP traffic from IP 10.0.0.1 to queue 6. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18virtchnl2: add flow steering supportSudheer Mogilappagari1-7/+202
Add opcodes and corresponding message structure to add and delete flow steering rules. Flow steering enables configuration of rules to take an action or subset of actions based on a match criteria. Actions could be redirect to queue, redirect to queue group, drop packet or mark. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Co-developed-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18virtchnl2: rename enum virtchnl2_cap_rssAhmed Zaki3-35/+35
The "enum virtchnl2_cap_rss" will be used for negotiating flow steering capabilities. Instead of adding a new enum, rename virtchnl2_cap_rss to virtchnl2_flow_types. Also rename the enum's constants. Flow steering will use this enum in the next patches. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18et131x: Add missing check after DMA mapThomas Fourier1-0/+36
The DMA map functions can fail and should be tested for errors. If the mapping fails, unmap and return an error. Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Acked-by: Mark Einon <mark.einon@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250716094733.28734-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18net: ag71xx: Add missing check after DMA mapThomas Fourier1-0/+9
The DMA map functions can fail and should be tested for errors. Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250716095733.37452-3-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18ibmvnic: Use ndo_get_stats64 to fix inaccurate SAR reportingMingming Cao1-7/+20
VNIC testing on multi-core Power systems showed SAR stats drift and packet rate inconsistencies under load. Implements ndo_get_stats64 to provide safe aggregation of queue-level atomic64 counters into rtnl_link_stats64 for use by tools like 'ip -s', 'ifconfig', and 'sar'. Switch to ndo_get_stats64 to align SAR reporting with the standard kernel interface for retrieving netdev stats. This removes redundant per-adapter stat updates, reduces overhead, eliminates cacheline bouncing from hot path updates, and improves the accuracy of reported packet rates. Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> ---- Changes since v3: link to v3: https://www.spinics.net/lists/netdev/msg1107999.html -- keep per queue counters as u64 (this patch) and drop off patch 1 in v3 Link: https://patch.msgid.link/20250716152115.61143-1-mmc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-12-15 18:53:36 +0300